☆ 4.7 Article

Strengthening of steel beams with adhesively bonded memory-steel strips

THIN-WALLED STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Experimental investigation on debonding behavior of Fe-SMA-to-steel joints

Lingzhen Li et al.

Summary: This work is the first systematic study on the static behavior of adhesively-bonded Fe-SMA-to-steel joints. Through an experimental campaign involving lap-shear tests, the mechanical behavior of the joints was analyzed. Different types of Fe-SMAs, adhesives, and adhesive thicknesses were tested. The results showed that a more ductile or thicker adhesive layer had a higher bond capacity, and a nonlinear adhesive led to significant mechanical differences between Fe-SMA and CFRP bonded joints.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Influence of curing, post-curing and testing temperatures on mechanical properties of a structural adhesive

Younes Jahani et al.

Summary: This paper presents a comprehensive experimental investigation on the influence of temperature on mechanical properties and glass transition temperature (Tg) of a structural epoxy adhesive. The results show that the curing and post-curing temperature affect Tg and mechanical properties differently depending on whether the applied temperature is below or beyond the epoxy Tg.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Stability of steel columns with bolted strengthening under preload: Experimental study

Sizhe Wang et al.

Summary: This study investigates the effect of preload on the stability of strengthened steel columns. Experimental results show that preload influences the behaviors of columns, including deformations, strains, and stresses, as well as the ultimate load capacity. The effect of preload on ultimate load capacity is generally insignificant, but it can be either favorable or unfavorable depending on the case. The combined effects of equivalent initial deformation and initial stresses contribute to the varying effect of preload.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Engineering, Civil

Flexural behavior of light steel purlins reinforced by prestressed CFRP laminates

Lili Hu et al.

Summary: This study proposed a new technology using prestressed CFRP to reinforce steel purlins, successfully delaying flexural failure and improving flexural capacity and stiffness. It also provided an accurate calculation method, offering important references for reinforcing cold-formed thin-walled steel beams.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Stability of steel columns strengthened under preload: Numerical study with experimental validation

Sizhe Wang et al.

Summary: This study investigates the effect of preload on the stability of strengthened steel columns. Through numerical and parametric studies, it is found that the preload level, section geometry, steel properties, and column length are key factors influencing the preload effect. A prediction model is proposed and validated, demonstrating its capability of providing accurate predictions.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Mechanics

Experimental study on Fe-SMA-to-steel adhesively bonded interfaces using DIC

Wandong Wang et al.

Summary: This study investigated the interface behavior of Fe-SMA strips bonded to metallic substrates through single lap-shear tests, finding that the bond strength can reach over 70% of the Fe-SMA tensile strength and identifying three energy dissipation mechanisms during debonding. The experimentally obtained bond-slip relations represent more than just adhesive failure energy dissipation.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Construction & Building Technology

Experimental behavior of iron-based shape memory alloys under cyclic loading histories

Diego Isidoro Heredia Rosa et al.

Summary: The study investigates the behavior of iron-based shape memory alloys subjected to cyclic inelastic straining. Fe-SMAs exhibit an asymmetric stress-strain relation and higher hardening response compared to conventional structural steels, leading to comparatively larger elastic strain energies being stored.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Mechanics

Behavior of cracked steel plates strengthened with adhesively bonded CFRP laminates under fatigue Loading: Experimental and analytical study

Y. Doroudi et al.

Summary: This study investigates the fatigue performance of CFRP-strengthened cracked steel plates through experimental and numerical modeling approaches. The results indicate that CFRP strengthening can extend the fatigue life of steel plates, and the theoretical model accurately predicts the remaining fatigue life.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Stress recovery behavior of an Fe-Mn-Si shape memory alloy

Xiang-Lin Gu et al.

Summary: This study investigated the stress recovery behavior of an Fe-Mn-Si-Cr-Ni-VC shape memory alloy for prestressed strengthening. The effects of different prestrain levels, activation temperatures, and initial preloads on recovery stress were evaluated to propose an optimum activation strategy. Additionally, mechanical properties of the alloy after activation, including performance under high-temperature activation and high-cycle fatigue loadings, were studied.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Novel fatigue strengthening solution for metallic structures using adhesively bonded Fe-SMA strips: A proof of concept study

Wandong Wang et al.

Summary: The study proposes an innovative fatigue strengthening solution for metallic structures using iron-based shape memory alloy and bonding technique. Experimental results demonstrate that bonded prestressed Fe-SMA strips are much more effective than traditional CFRP strips in retarding fatigue crack growth, extending the fatigue crack growth life by a factor of 3.51.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Mechanical

Fatigue behavior of FRP-to-steel bonded interface: An experimental study with a damage plasticity model

Y. Doroudi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Civil

The bond behaviour of CFRP-to-steel bonded joints with varying bond properties at elevated temperatures

Hao Zhou et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Elevated temperature behavior of an iron-based shape memory alloy used for prestressed strengthening of civil structures

Elyas Ghafoori et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Strengthening of a 19th-century roadway metallic bridge using nonprestressed bonded and prestressed unbonded CFRP plates

Ardalan Hosseini et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Engineering, Civil

Experimental study on the bond behavior of CFRP-steel interfaces under quasi-static cyclic loading

Yuyang Pang et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Thermally activated iron-based shape memory alloy for strengthening metallic girders

Mohammadreza Izadi et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Development of nail-anchor strengthening system with iron-based shape memory alloy (Fe-SMA) strips

Emil Fritsch et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Mechanics

Fatigue retrofitting of cracked steel beams with CFRP laminates

Qian-Qian Yu et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Multidisciplinary

Experimental study on CFRP-strengthened steel beams

Tomasz W. Siwowski et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Iron-based shape memory alloy strips for strengthening RC members: Material behavior and characterization

Moslem Shahverdi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Instruments & Instrumentation

Stress recovery and cyclic behaviour of an Fe-Mn-Si shape memory alloy after multiple thermal activation

E. Hosseini et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Multidisciplinary

Flat prestressed unbonded retrofit system for strengthening of existing metallic I-Girders

Ardalan Hosseini et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

Short-term bond behavior and debonding capacity of prestressed CFRP composites to steel substrate

Ardalan Hosseini et al.

ENGINEERING STRUCTURES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Fatigue behavior of a Fe-Mn-Si shape memory alloy used for prestressed strengthening

E. Ghafoori et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical performance of cold-curing epoxy adhesives after different mixing and curing procedures

Julien Michels et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Glass transition evaluation of commercially available epoxy resins used for civil engineering applications

Julien Michels et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Construction & Building Technology

Lateral-torsional buckling of steel I-beams retrofitted by bonded and un-bonded CFRP laminates with different pre-stress levels: Experimental and numerical study

Elyas Ghafoori et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Engineering, Civil

Innovative CFRP-Prestressing System for Strengthening Metallic Structures

Elyas Ghafoori et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Add to Collection

Article Construction & Building Technology

Behavior of I-section steel beam welding reinforced while under load

Wang Yuan-qing et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Normal, high and ultra-high modulus carbon fiber-reinforced polymer laminates for bonded and un-bonded strengthening of steel beams

Elyas Ghafoori et al.

MATERIALS & DESIGN (2015)

Add to Collection

Review Construction & Building Technology

Iron-based shape memory alloys for civil engineering structures: An overview

A. Cladera et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Engineering, Civil

Experimental and computational study of the vertical shear behaviour of partially encased perforated steel beams

Konstantinos Daniel Tsavdaridis et al.

ENGINEERING STRUCTURES (2013)

Add to Collection

Article Engineering, Civil

Structural Strengthening with Prestressed CFRP Strips with Gradient Anchorage

Julien Michels et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2013)

Add to Collection

Article Engineering, Civil

Strengthening of steel members in compression by mortar-filled FRP tubes

Peng Feng et al.

THIN-WALLED STRUCTURES (2013)

Add to Collection

Article Engineering, Multidisciplinary

Experimental study on CFRP-to-steel bonded interfaces

T. Yu et al.

COMPOSITES PART B-ENGINEERING (2012)

Add to Collection

Article Engineering, Mechanical

Fatigue strengthening of damaged metallic beams using prestressed unbonded and bonded CFRP plates

E. Ghafoori et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

Add to Collection

Review Construction & Building Technology

Strengthening of steel structures with fiber-reinforced polymer composites

J. G. Teng et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2012)

Add to Collection

Article Construction & Building Technology

Design of short CFRP-reinforced steel tubular columns

Jimmy Haedir et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2011)

Add to Collection

Article Mechanics

Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures

Hongbo Liu et al.

COMPOSITE STRUCTURES (2009)

Add to Collection

Article Engineering, Civil

Slender Steel Columns Strengthened Using High-Modulus CFRP Plates for Buckling Control

Amr Shaat et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2009)

Add to Collection

Article Construction & Building Technology

Experimental behavior and strength of steel beams strengthened while under load

Yi Liu et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2009)

Add to Collection

Article Construction & Building Technology

Effect of preload on the axial capacity of concrete-filled composite columns

J. Y. Richard Liew et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2009)

Add to Collection

Article Engineering, Civil

Non-linear behaviour and load-carrying capacity of CFRP-strengthened lipped channel steel columns

Nuno Silvestre et al.

ENGINEERING STRUCTURES (2008)

Add to Collection

Article Engineering, Civil

Restraining steel brace buckling using a carbon fiber-reinforced polymer composite system: Experiments and computational simulation

Ekin Ekiz et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2008)

Add to Collection

Article Engineering, Civil

State-of-the-art review on FRP strengthened steel structures

Xiao-Ling Zhao et al.

ENGINEERING STRUCTURES (2007)

Add to Collection

Article Construction & Building Technology

Behaviour of FRP-jacketed circular steel tubes and cylindrical shells under axial compression

J. G. Teng et al.

CONSTRUCTION AND BUILDING MATERIALS (2007)

Add to Collection

Article Engineering, Multidisciplinary

An experimental, analytical and numerical study of the static behavior of steel beams reinforced by pultruded CFRP strips

P Colombi et al.

COMPOSITES PART B-ENGINEERING (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.