☆ 4.7 Article

Flexural property study of multiaxial fiber reinforced polymer sandwich panels with pultruded profile cores

THIN-WALLED STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Investigation of quasi-static indentation on sandwich structure with GFRP face sheets and PLA bio-inspired core: Numerical and experimental study

Muthukumaran Gunasegeran et al.

Summary: This study investigates the energy absorption, load response, failure modes, and damage mechanics of a sandwich structure under quasi-static indentation. The results show good agreement between the experimental and numerical analysis results, indicating the importance of choosing an appropriate core structure for lightweight sandwich structures.

THIN-WALLED STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Nonlinear behaviour of pultruded decks due to morphing of tyre loads

Zhaotian Yang et al.

Summary: This paper addresses the nonlinearity of the spatial profile of load exerted by a pneumatic tyre on a pultruded GFRP deck. It proposes a method using pressure sensor recordings to extract spatially-defined tyre loads for finite element analysis, which can be applied to study other tyres, inflation pressures, and deck geometries.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Construction & Building Technology

Steel slag aggregate concrete filled-in FRP tubes: Volume expansion effect and axial compressive behaviour

Peng Feng et al.

Summary: This study investigates the use of FRP tubes to confine steel slag aggregate concrete and experimentally verifies that this method can effectively control the expansion and cracking of slag aggregates in concrete. The proposed prefabricated structural component, FCCC-PR, utilizes the volume expansion characteristics of slag aggregate concrete under confinement by FRP tubes.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Flexural behaviour of the composite sandwich beams with grid-scored foam: Experimental and theoretical approach

F. Balikoglu et al.

Summary: This study investigates the load-displacement response and failure behavior of grid-scored foam cored sandwich beams under three- and four-point bending tests with different span lengths. The accurate prediction of the elastic properties of grid-scored polymer foam core is achieved using a simple analytical rule of mixtures approach. Theoretical formulations are used to predict failure loads and mid-span deflections by accounting for equivalent shear and bending stiffness of the sandwich beam and are compared to the experimental results.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Flexural property evaluation of web reinforced GFRP-PET foam sandwich panel: Experimental study and numerical simulation

Honglei Xie et al.

Summary: This study focused on the flexural property of PET foam-filled lattice composite sandwich panels under four-point bending. Increasing the thickness of face sheet and PET foam can effectively improve the ultimate load of the panels. Experimental results and theoretical predictions showed errors within 10% for bending stiffness and ultimate load.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Study on the low-velocity impact response of foam-filled multi-cavity composite panels

Jiye Chen et al.

Summary: This paper investigates the influence of lattice-web layout on the low-velocity impact performance of foam filled multi-cavity composite panels (FMCPs) and develops an energy balance model to predict the peak loads of the FMCPs. The study demonstrates that FMCP with double-layer dislocation webs can be used as an effective energy buffer due to its light weight and great energy absorption capacity. Numerical models and parametric analysis on GFRP thickness and foam density were also conducted in the study.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Geometrically nonlinear dynamic analysis of variable stiffness composite laminated and sandwich shell panels

Ankita Gupta et al.

Summary: In this study, the nonlinear free and forced vibration analyses of variable stiffness composite laminated (VSCL) and sandwich shell panels with curvilinear fibers were conducted using a higher-order theory. The structural model considered a third-order shear deformation theory, and geometric nonlinearity was included through von Karman nonlinear strain-displacement relations. The results were compared with existing exact and analytical solutions to validate the model.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Development, assessment and implementation of a novel FRP composite girder bridge

William G. Davids et al.

Summary: A lightweight and easily erected hybrid glass-carbon FRP bridge girder is developed and assessed. The test results verify the viability of this FRP girder for short and medium-span bridges.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Review of balsa core sandwich composite structures

Joel Galos et al.

Summary: This paper reviews the research on the applications, manufacturing, properties, and performance of sandwich structures with balsa wood cores. Balsa wood offers advantages such as environmental sustainability, low cost, excellent mechanical properties, and thermal insulation. However, challenges including global supply chain issues and limitations in processing techniques, as well as impact, blast, fire, and water durability, need to be addressed. The paper also discusses future research directions for balsa structural sandwich materials.

MATERIALS & DESIGN (2022)

Add to Collection

Article Engineering, Civil

Analysis of sandwich structures with corrugated and spiderweb-inspired cores for aerospace applications

K. Tewari et al.

Summary: The bending response of laminated composite sandwich structures developed for aircraft flaps is analyzed in this study. The results show that the designed composite structure can withstand higher loads and has higher flexural stiffness. The performance of the structure can be further improved by optimizing the core design. In addition, a novel bio-inspired spiderweb core design is developed, which has better stiffness compared to traditional corrugated core structures. Scaling and patterning of the geometry are investigated, and hail impact simulations are performed to estimate maximum induced stresses and peak forces.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Low-velocity impact, bending, and compression response of carbon fiber/epoxy-based sandwich composites with different types of core materials

Akar Dogan

Summary: This study investigates the effects of different core materials on the performance of sandwich composites, with Ayous wood showing higher perforation threshold and bending/compression strength compared to Balsa wood and PVC foam.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

Static and dynamic characteristics of nano-reinforced 3D-fiber metal laminates using non-destructive techniques

B. Soltannia et al.

Summary: The research aims to explore the parameters affecting the frequency response of three-dimensional fiber metal laminates and experimentally investigates the vibration characteristics of different configurations. Results show that adding nanocarbon particles can improve material damping significantly.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Compressive behaviour of wood-filled GFRP square columns with lattice-web reinforcements

Laiyun Yang et al.

Summary: In this study, a novel wood-filled glass fibre-reinforced polymer square column with lattice-web reinforcements was proposed, and experimental results showed that specimens with lattice-web reinforcements had higher ultimate loads and pseudo-ductile behavior.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Static and sustained loading behavior of a basalt FRP shell-concrete composite bridge deck: An experimental and numerical study

Zheqi Peng et al.

Summary: The study investigated an optimized BFRP-concrete composite bridge deck, showing lower deflections and good load capacities compared to previous studies, thus achieving higher short-term cost performance. The FE model using creep models for FRP and concrete showed good agreement with experimental results in both short and long-term scenarios. Numerical simulation indicated that the bridge deck can sustain loads for 50 years with allowable load level meeting ACI standards for creep deflection.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Mechanics

Effect of fibre layup and bearing length on the web-crippling behaviour of pultruded GFRP profiles

Lourenco Almeida-Fernandes et al.

Summary: This experimental study investigated the web-crippling behavior of pultruded glass fiber reinforced polymer (GFRP) profiles under end two flange (ETF) and interior two flange (ITF) configurations with varying bearing lengths. The results showed that changes in fiber layups did not significantly affect the stiffness and ultimate loads of the profiles, but the bearing length had a significant impact on the failure mode, stiffness, and ultimate load of all I-section profiles. Despite significant differences in geometrical and material properties, all I-section profiles exhibited similar transverse compressive strain distributions under the same loading conditions.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Development of an innovative composite sandwich matting with GFRP facesheets and wood core

Honglei Xie et al.

Summary: This study introduces a new type of composite sandwich matting, consisting of paulownia woods, glass fiber reinforced plastic as core materials, demonstrating excellent mechanical properties. Through experimental validation and finite element analysis, it has been proven suitable for military engineering, emergency rescue, and large infrastructure construction.

REVIEWS ON ADVANCED MATERIALS SCIENCE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Flexural deformation behavior of carbon fiber reinforced aluminium hybrid foam sandwich structure

Ashutosh Pandey et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Flexural properties of a novel foam core sandwich structure reinforced by stiffeners

Jianbang Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Materials Science, Composites

Pultruded materials and structures: A review

Alexander Vedernikov et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Mechanics

Flexural behavior of timber beams strengthened with pultruded glass fiber reinforced polymer profiles

Mohammad Shekarchi et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Materials Science, Composites

Experimental investigation on fly ash particulate reinforcement for property enhancement of PU foam core FRP sandwich composites

Ashish Singh Pareta et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Manufacturing

Process induced deformations in composite sandwich panels using an in-homogeneous layup design

M. Al-Dhaheri et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Review Engineering, Manufacturing

An overview of the formation of fibre waviness and its effect on the mechanical performance of fibre reinforced polymer composites

Pritam Kulkarni et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Construction & Building Technology

Mechanical properties of pultruded GFRP profiles under seawater sea sand concrete environment coupled with UV radiation and moisture

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Civil

Design, fabrication and stiffness analysis of a novel GFRP sandwiched pipe with stiffened core

Yangxuan Zhu et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Multi-objective optimization of pultruded composite sandwich panels for building floor rehabilitation

M. Garrido et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Chemistry, Analytical

Axial Compression Behaviours of Pultruded GFRP-Wood Composite Columns

Yujun Qi et al.

SENSORS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Pultruded GFRP square hollow columns with bolted sleeve joints under eccentric compression

Lei Xie et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical study of the response to various impact energy levels for composite sandwich plates with different face thicknesses

Moeen S. Rajput et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Flexural behavior of composite sandwich beams with different kinds of GFRP ribs in flatwise and edgewise positions

Fubin Zhang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Civil

Sandwich assemblies of composites square hollow sections and thin-walled panels in compression

Xie Lei et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Fiber reinforced composites sandwich panels with web reinforced wood core for building floor applications

Dian Zhu et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

FLEXURAL PERFORMANCE OF A HYBRID BRIDGE DECK WITH PULTRUDED FIBRE REINFORCED POLYMER COMPOSITE SANDWICH PANELS

Lei Wu et al.

BALTIC JOURNAL OF ROAD AND BRIDGE ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Effect of width-thickness ratio on capacity of pultruded square hollow polymer columns

Lei Xie et al.

PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS (2018)

Add to Collection

Article Construction & Building Technology

Behaviour of pultruded glass fibre reinforced composites guardrail system

Allan Manalo et al.

ADVANCES IN STRUCTURAL ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Bending performance of GFRP-wood sandwich beams with lattice-web reinforcement in flatwise and sidewise directions

Youjun Qi et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Analytical and experimental evaluation of flexural behavior of FRP pultruded composite profiles for bridge deck structural design

Haohui Xin et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Flexural responses and pseudo-ductile performance of lattice-web reinforced GFRP-wood sandwich beams

Huiyuan Shi et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Engineering, Multidisciplinary

The effect of foam core density at various slenderness ratios on axial strength of sandwich panels with glass-FRP skins

Luke CoDyre et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Experimental Investigation of the Behavior of a Lattice Steel Column Repaired with Pultruded GFRP Profiles

Yang Zhan et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2015)

Add to Collection

Article Multidisciplinary Sciences

Experimental Study of the Flexural and Compression Performance of an Innovative Pultruded Glass-Fiber-Reinforced Polymer-Wood Composite Profile

Yujun Qi et al.

PLOS ONE (2015)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical performance of foam-filled lattice composite panels in four-point bending: Experimental investigation and analytical modeling

Lu Wang et al.

COMPOSITES PART B-ENGINEERING (2014)

Add to Collection

Article Construction & Building Technology

Pre-buckling and post-buckling failure at web-flange junction of pultruded GFRP beams

Yu Bai et al.

MATERIALS AND STRUCTURES (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.