☆ 4.7 Article

Effect of solidification behaviors on microstructures and properties of high-entropy alloys coatings by laser melting deposition

SURFACE & COATINGS TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Optics

Multi-objective optimization for laser cladding refractory MoNbTiZr high-entropy alloy coating on Ti6Al4V

Qiang Gao et al.

Summary: A novel MoNbTiZr refractory high-entropy alloy coating was synthesized on Ti6Al4V surfaces using laser cladding technique. Mathematical models between laser processing parameters (laser power, powder feeding rate, scanning speed) and dilution, porosity, and microhardness were developed and validated. The results showed that dilution and porosity were negatively correlated due to the difference in melting point between the substrate and the coating. Multi-objective optimization identified the optimal processing parameters for dilution, porosity, and microhardness.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Electrochemistry

Influence of process parameters on surface properties and corrosion resistasnce of Inconel 625 coating prepared by laser cladding

Longlong Guo et al.

Summary: In order to achieve good corrosion resistance and cost savings, laser cladding was used to prepare Inconel 625 coatings with different process parameters using Inconel 625 powder as the feed material. The study analyzed the effects of powder feed rate (Vp), scan rate (Vs), and laser power (P) on the surface waviness (Wa) and effective height (he) of the cladding. The results showed that Wa and he increased with the increase of Vp, while decreased with the increase of Vs. Additionally, P had a positive influence on he, but when P exceeded 1.0 kW, it led to an increase in Wa. The microstructure analysis revealed that the cladding was predominantly composed of γ-Ni matrix and laves phase. The process parameters also affected the grain size and laves phase. Among the tested coatings, No.3 exhibited the best corrosion resistance, with the highest Ecorr, lowest Icorr, and largest Epit. It was concluded that larger grain size and fewer laves phases benefited the corrosion resistance.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2023)

Add to Collection

Article Materials Science, Multidisciplinary

A comparative study on microstructure, nanomechanical and corrosion behaviors of AlCoCuFeNi high entropy alloys fabricated by selective laser melting and laser metal deposition

Yaojia Ren et al.

Summary: This study investigated the microstructure, nanomechanics, and corrosion behavior of AlCoCuFeNi high entropy alloys fabricated by selective laser melting and laser metal deposition. The results showed significant differences between the SLM-processed and LMD-processed specimens in terms of microstructure, nanomechanics, and corrosion behavior. The LMD-processed specimens exhibited a coarser grain structure, stronger texture, lower hardness, wear resistance, corrosion resistance, but higher creep resistance and reduced Young's modulus compared to the SLM-processed specimens. Both types of specimens experienced hot cracks.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Laser cladding of CoCrFeNi high-entropy alloy coatings: Compositional homogeneity towards improved corrosion resistance

Qi Zhu et al.

Summary: This study successfully avoids the issues of phase separation and elemental segregation in laser-cladded HEA coatings through post-annealing treatment, achieving homogeneous elemental distribution and improved corrosion resistance.

MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced wear and corrosion resistances of AlCoCrFeNi high-entropy alloy coatings via high-speed laser cladding

Zhenzeng Chong et al.

Summary: In this study, an AlCoCrFeNi high-entropy alloy (HEA) coating was prepared on the surface of AISI 1045 steel by high-speed laser cladding (HLC). The results showed that the coating had a metallurgical bond and even element distribution. Compared to conventional laser cladding (CLC), HLC had higher cladding efficiency and improved processing quality, with lower surface roughness and dilution ratio. Moreover, HLC technology effectively improved the hardness, reduced the friction coefficient, decreased the wear weight loss, and enhanced the corrosion resistance of the coatings.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of AlxCoCrFeNi high-entropy alloys by laser melting deposition

Liufei Huang et al.

Summary: AlxCoCrFeNi high entropy alloys were successfully synthesized by laser melting deposition, with the microstructure transforming from a single FCC phase to a mixture of FCC + BCC phases as the Al content increased. The addition of Al significantly improved the yield strength and tensile strength while reducing plasticity in tension.

VACUUM (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Process parameter optimization and EBSD analysis of Ni60A-25% WC laser cladding

Sha Wu et al.

Summary: In this research work, the preset powder feeding laser cladding process of Ni60A-25% tungsten carbide powder was optimized using response surface methodology. The microhardness of the laser cladding layer was significantly increased compared with the substrate, and the mathematical models for the dilution and unit effective area were successfully validated. The EBSD analysis showed a pronounced meritocratic orientation in the laser cladding layer.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Research status of laser additive manufacturing for metal: a review

Guanghao Gong et al.

Summary: Y Additive manufacturing, particularly laser additive manufacturing, is a novel manufacturing technique that forms layer-by-layer according to geometric model, offering advantages such as rapid prototyping, customization, and forming intricate structures. It is mainly used for metallic materials currently, with certain limitations and challenges, but the future development trends show promise.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Review Optics

Recent research and development status of laser cladding: A review

Lida Zhu et al.

Summary: This paper provides a detailed introduction to the application of Laser Cladding (LC) in machine parts repairing and functional coating, as well as comprehensive reviews on High Entropy Alloys (HEAs), amorphous alloys, and single crystal alloys in LC. The existing problems and development trends of LC are also discussed in the paper.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Comparison of microstructure and properties of CoCrFeMnNi high-entropy alloy from selective laser melting and directed energy deposition processes

Roman Savinov et al.

Summary: The study on the preparation of high entropy alloys using SLM and DED methods reveals differences in microstructure and chemical composition between the two samples, with the presence of Mn oxides and other defects in DED samples, while lack of fusion and balling defects were observed in SLM samples.

49TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 49, 2021) (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Numerical simulation and experimental study on austenitic stainless steel by laser assisted metal deposition (L-MD)

Koyilada Benarji et al.

Summary: Laser-assisted metal deposition (L-MD) is a type of direct energy deposition (DED) process that produces components with excellent metallurgical properties and full density. Finite element analysis is used to understand the thermal behavior that governs microstructure characteristics. Input parameters such as scanning rate, powder feeding rate, and laser power have significant effects on clad height and width, as well as solidification rate and temperature gradient.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Mechanical

The relationship between convection mechanism and solidification structure of the iron-based molten pool in metal laser direct deposition

Boxue Song et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Industrial

Microstructural evolution of laser-clad 75Cr3C2+25(80Ni20Cr) powder on Inconel 718 superalloy

Ali Khorram et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Optics

Effect of process parameters on the cladding track geometry fabricated by laser cladding

Yu Zhao et al.

OPTIK (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative Study of Pure Iron Manufactured by Selective Laser Melting, Laser Metal Deposition, and Casting Processes

Danilo Carluccio et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Elemental segregation in an AlCoCrFeNi high-entropy alloy - A comparison between selective laser melting and induction melting

Dennis Karlsson et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Optics

Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology

X. Li et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Al0.5FeCoCrNi high entropy alloy prepared by selective laser melting with gas-atomized pre-alloy powders

P. F. Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Laser Metal Deposition Of Titanium Aluminide Composites: A Review

Kamardeen O. Abdulrahman et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Powder Bed Based Laser Additive Manufacturing Process of Stainless Steel: A Review

Adebola Adeyemi et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Chemistry, Physical

Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication

Rui Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition

Mingming Ma et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Coatings & Films

Direct laser deposition cladding of AlxCoCrFeNi high entropy alloys on a high-temperature stainless steel

Qi Chao et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Additive Manufacturing: Making Imagination the Major Limitation

Yuwei Zhai et al.

JOM (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of annealing treatment on microstructures and mechanical properties of FeCoNiCuAl high entropy alloys

Y. X. Zhuang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Automation & Control Systems

Balling behavior of stainless steel and nickel powder during selective laser melting process

Ruidi Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Computational Thermodynamics Aided High-Entropy Alloy Design

Chuan Zhang et al.

JOM (2012)

Add to Collection

Article Engineering, Mechanical

Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks

Igor Yadroitsev et al.

RAPID PROTOTYPING JOURNAL (2012)

Add to Collection

Article Engineering, Mechanical

Metallic additive manufacturing: state-of-the-art review and prospects

Benjamin Vayre et al.

MECHANICS & INDUSTRY (2012)

Add to Collection

Article Engineering, Mechanical

Improving the wear resistance of white cast iron using a new concept - High-entropy microstructure

Y. P. Wang et al.

WEAR (2011)

Add to Collection

Article Engineering, Mechanical

Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys

Chin-You Hsu et al.

WEAR (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Solid-solution phase formation rules for multi-component alloys

Yong Zhang et al.

ADVANCED ENGINEERING MATERIALS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.