Related references
Note: Only part of the references are listed.Critical Current Densities Through Josephson Junctions in Low Magnetic Fields
Bradley P. Din et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)
Computational Simulations Using Time-Dependent Ginzburg-Landau Theory for Nb-Ti-Like Microstructures
C. W. W. Haddon et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)
Multi-scale nonlinear stress analysis of Nb3Sn superconducting accelerator magnets
Eric Qiuli Sun
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)
Improving critical current density of Nb3Sn by optimizing pinning potential of grain boundary and grain size
Han-Xi Ren et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)
Formation and propagation of cracks in RRP Nb3Sn wires studied by deep learning applied to x-ray tomography
Tommaso Bagni et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)
Strategy for Developing the EU-DEMO Magnet System in the Concept Design Phase
V Corato et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)
Critical current density of superconducting-normal-superconducting Josephson junctions and polycrystalline superconductors in high magnetic fields
A. Blair et al.
PHYSICAL REVIEW RESEARCH (2022)
Effect of grain boundary deformation on the critical temperature degradation of superconducting Nb3Sn under hydrostatic pressure
Li Qiao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Morphological and Mechanical Behaviour of Cu-Sn Alloys-A review
M. Karthik et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Metallographic analysis of 11 T dipole coils for High Luminosity-Large Hadron Collider (HL-LHC)
Shreyas Balachandran et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)
Statistical analysis of mesoscopic concrete with random elastic modulus
Qirui Luo et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Experimental study on strain sensitivity of Internal-Tin Nb3Sn superconducting strand based on non-destructive technology
Fuzhi Shen et al.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2021)
Analysis of the strain dependence of the superconducting critical properties of single-crystal and polycrystalline Nb3Sn
He Ding et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)
On the mechanisms governing the critical current reduction in Nb3Sn Rutherford cables under transverse stress
Gianluca De Marzi et al.
SCIENTIFIC REPORTS (2021)
Machine learning applied to X-ray tomography as a new tool to analyze the voids in RRP Nb3Sn wires
T. Bagni et al.
SCIENTIFIC REPORTS (2021)
A concurrent multiscale framework based on self-consistent clustering analysis for cylinder structure under uniaxial loading condition
Yixin Feng et al.
COMPOSITE STRUCTURES (2021)
Comparative study on the strain-dependent mechanical and electronic properties of Nb3Al and Nb3Sn
Zhao Liu et al.
MATERIALS RESEARCH EXPRESS (2021)
An effective thermal conductivity and thermomechanical homogenization scheme for a multiscale Nb3Sn filaments
Xiaoyu Zhao et al.
NANOTECHNOLOGY REVIEWS (2021)
The use of Nb3Sn in fusion: lessons learned from the ITER production including options for management of performance degradation
N. Mitchell et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2020)
A 3D Finite Element Model of the Reversible Critical Current Reduction Due to Transverse Load in Nb<inline-formula><tex-math notation=LaTeX>$_3$</tex-math></inline-formula>Sn Wires
A. Cattabiani et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)
Determination of the electromechanical limits of high-performance Nb3Sn Rutherford cables under transverse stress from a single-wire experiment
L. Gamperle et al.
PHYSICAL REVIEW RESEARCH (2020)
Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper
Xiaochong Lu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
The role of elastic anisotropy on the macroscopic constitutive response and yield onset of cubic oligo- and polycrystals
R. R. Tenreiro Vieira et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Influence of transverse stress exerted at room temperature on the superconducting properties of Nb3Sn wires
P. Ebermann et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2019)
Modeling the Critical Current of Polycrystalline Superconducting Films in High Magnetic Fields
Alexander Blair et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)
The CERN FCC Conductor Development Program: A Worldwide Effort for the Future Generation of High-Field Magnets
Amalia Ballarino et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)
Baseline Design of a 16 T cos θ Bending Dipole for the Future Circular Collider
Riccardo Valente et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)
Progress in the design of the superconducting magnets for the EU DEMO
V. Corato et al.
FUSION ENGINEERING AND DESIGN (2018)
Time-Dependent Ginzburg-Landau Simulations of the Critical Current in Superconducting Films and Junctions in Magnetic Fields
Alexander I. Blair et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)
Fundamental origin of the large impact of strain on superconducting Nb3Sn
A. Godeke et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2018)
Optimization of the Microstructure of Nb3Sn Layers in Superconducting Composites
E. N. Popova et al.
PHYSICS OF METALS AND METALLOGRAPHY (2018)
The DTT proposal. A tokamak facility to address exhaust challenges for DEMO: Introduction and executive summary
R. Albanese et al.
FUSION ENGINEERING AND DESIGN (2017)
The Effect of Hydrostatic Pressure on the Superconducting and Structural Properties of Nb3Sn: Ab-initio Modeling and SR-XRD Investigation
Rita Loria et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)
Segregation effects of Y, Ti, Cr and Si on the intergranular fracture of niobium
Songxin Shi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Recent progress in microstructural hydrogen mapping in steels: quantification, kinetic analysis, and multi-scale characterisation
Motomichi Koyama et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Strain dependence of critical superconducting properties of Nb3Sn with different intrinsic strains based on a semi-phenomenological approach
Rui Zhang et al.
CRYOGENICS (2017)
Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina
Zhiyong Wang et al.
CERAMICS INTERNATIONAL (2017)
Evolution of T2 resistivity and superconductivity in Nb3Sn under pressure
Z. Ren et al.
PHYSICAL REVIEW B (2017)
Mechanical behaviors of multi-filament twist superconducting strand under tensile and cyclic loading
Xu Wang et al.
CRYOGENICS (2016)
Fracture Strength Distribution of Individual Nb3Sn Filaments
Maxwell T. Dylla et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2016)
The role of stoichiometry in superconducting Nb1-βSnβ: electronic and vibrational properties from ab initio calculations
F. Gala et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
The effect of hydrogen on the evolution of intergranular cracking: a cross-scale study using first-principles and cohesive finite element methods
Xin Wei et al.
RSC ADVANCES (2016)
Elastic Anisotropy in Multifilament Nb3Sn Superconducting Wires
C. Scheuerlein et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2015)
Simulating Intergranular Stress Corrosion Cracking in AZ31 Using Three-Dimensional Cohesive Elements for Grain Structure
J. Zhang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Cohesive zone modeling of intergranular cracking in polycrystalline aggregates
Igor Simonovski et al.
NUCLEAR ENGINEERING AND DESIGN (2015)
Superconductivity in the A15 structure
G. R. Stewart
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2015)
First-principles study on elastic and superconducting properties of Nb3Sn and Nb3Al under hydrostatic pressure
Rui Zhang et al.
AIP ADVANCES (2015)
Crystal plasticity finite element simulation of crack growth in single crystals
J. Li et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
A novel modeling to predict the critical current behavior of Nb3Sn PIT strand under transverse load based on a scaling law and Finite Element Analysis
Tiening Wang et al.
CRYOGENICS (2014)
Modelling the effect of elastic and plastic anisotropies on stresses at grain boundaries
D. Gonzalez et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Stress distribution and lattice distortions in Nb3Sn multifilament wires under uniaxial tensile loading at 4.2 K
C. Scheuerlein et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2014)
Challenges and status of ITER conductor production
A. Devred et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2014)
Texture in state-of-the-art Nb3Sn multifilamentary superconducting wires
C. Scheuerlein et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2014)
Cohesive element approach to grain level modelling of intergranular cracking
Igor Simonovski et al.
ENGINEERING FRACTURE MECHANICS (2013)
An FE Model to Study the Strain State of the Filaments of a Nb3Sn Internal-Tin Strand Under Transverse Load
Tiening Wang et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2013)
Strain sensitivity and superconducting properties of Nb3Sn from first principles calculations
G. De Marzi et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2013)
A simple and effective approach for thermo-mechanical modelling of composite superconducting wires
Daniela P. Boso
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2013)
Grain boundary segregation in a bronze-route Nb3Sn superconducting wire studied by atom probe tomography
M. J. R. Sandim et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2013)
Study of Filament Cracking Under Uniaxial Repeated Loading for ITER TF Strands
M. K. Sheth et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2012)
Evidence that filament fracture occurs in an ITER toroidal field conductor after cyclic Lorentz force loading in SULTAN
Carlos Sanabria et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2012)
The study of Nb3Sn phase content and structure dependence on the way of Ti doping in superconductors produced by bronze route.
Elena Dergunova et al.
SUPERCONDUCTIVITY CENTENNIAL CONFERENCE 2011 (2012)
Grain structure and irreversibility line of a bronze route CuNb reinforced Nb3Sn multifilamentary wire
M. J. R. Sandim et al.
SUPERCONDUCTIVITY CENTENNIAL CONFERENCE 2011 (2012)
A nonlocal cohesive zone model for finite thickness interfaces - Part II: FE implementation and application to polycrystalline materials
Marco Paggi et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
Numerical Simulation of Critical Current Performance in Nb3Sn Strand Subjected to Periodic Bending Deformation
Haruyuki Murakami et al.
ELECTRICAL ENGINEERING IN JAPAN (2010)
3D-Simulation of ductile failure in two-phase structural steel with heterogeneous microstructure
M. Ohata et al.
ENGINEERING FRACTURE MECHANICS (2010)
Polycrystal models for the analysis of intergranular crack growth in metallic materials
Torsten Luther et al.
ENGINEERING FRACTURE MECHANICS (2009)
Systematic Study on Filament Fracture Distribution in ITER Nb3Sn Strands
Arend Nijhuis et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2009)
Synchrotron Radiation Techniques for the Characterization of Nb3Sn Superconductors
Christian Scheuerlein et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2009)
Transverse cable stiffness and mechanical losses associated with load cycles in ITER Nb3Sn and NbTi CICCs
A. Nijhuis et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2009)
Distinct voltage-current characteristics of Nb3Sn strands with dispersed and collective crack distributions
Y. Miyoshi et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2009)
State of the art powder-in-tube niobium-tin superconductors
A. Godeke et al.
CRYOGENICS (2008)
Microstructure, composition and critical current density of superconducting Nb3Sn wires
R. Fluekiger et al.
CRYOGENICS (2008)
Axial and transverse stress-strain characterization of the EU dipole high current density Nb3Sn strand
A. Nijhuis et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2008)
Effect of transverse compressive stress on internal reinforced Nb3Sn superconducting wires and coils
G Nishijima et al.
CRYOGENICS (2005)
Performance of an ITER CS1 model coil conductor under transverse cyclic loading up to 40,000 cycles
A Nijhuis et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2004)
The influence of Nb3Sn strand geometry on filament breakage under bend strain as revealed by metallography
MC Jewell et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2003)
On the practical application of the cohesive model
A Cornec et al.
ENGINEERING FRACTURE MECHANICS (2003)
A grain level model for the study of failure initiation and evolution in polycrystalline brittle materials. Part II: Numerical examples
HD Espinosa et al.
MECHANICS OF MATERIALS (2003)