☆ 4.7 Article

Cyclization of methoxy groups on spiro-type hole transporting materials for efficient and stable perovskite solar cells

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

The Future of Spirobifluorene‐Based Molecules as Hole‐Transporting Materials for Solar Cells

Luca Vaghi et al.

Solar RRL (2023)

Add to Collection

Article Optics

Large-area perovskite solar cells employing spiro-Naph hole transport material

Mingyu Jeong et al.

Summary: By utilizing a symmetry-tuned strategy at the molecular level, we have developed a new class of spiro-Naph analogues as the hole transport material in perovskite solar cells, resulting in improved stability and power conversion efficiency.

NATURE PHOTONICS (2022)

Add to Collection

Article Energy & Fuels

A Trifluoroethoxyl Functionalized Spiro-Based Hole-Transporting Material for Highly Efficient and Stable Perovskite Solar Cells

Zheng Zhang et al.

Summary: A new spiro-based HTM, Spiro-4TFETAD, was developed by replacing methoxy groups in Spiro-OMeTAD with trifluoroethoxy substituents, exhibiting lower HOMO level, higher thermal stability, hole mobility, and hydrophobicity. PSCs utilizing Spiro-4TFETAD achieved a high power conversion efficiency of 21.11% and excellent humidity resistance, showcasing the promising potential of trifluoroethoxyl molecular design in creating efficient and stable PSCs.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Physical

Molecularly Engineered Low-Cost Organic Hole-Transporting Materials for Perovskite Solar Cells: The Substituent Effect on Non-fused Three-Dimensional Systems

Desire Molina et al.

Summary: This study investigates a new class of non-fused 3D asymmetric compounds as low-cost organic hole-transporting materials for perovskite solar cells. The research analyzes the influence of methylthio and methoxy group substitutions on the fluorene moiety, as well as the position of methoxy groups in the aromatic rings of triphenylamine pending groups. Experimental results demonstrate that the position of the methoxy group in the triphenylamine pending group significantly affects the thermal properties, electronic bandgap, hydrophobicity, film formation, and thermal stress stability. The presence of methylthio or methoxyl substituents in the fluorene moiety mainly affects the electrochemical properties, hole mobility, and morphology of the hole-transporting layer. PSCs with methoxy groups in the fluorene moieties achieved high sunlight-to-electricity power conversion efficiencies, and compound 1-based PSCs exhibited better stability than other materials and the standard HTM-spiro-OMeTAD-based devices. Overall, this research is rated 8.5 out of 10.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Restricting lithium-ion migration via Lewis base groups in hole transporting materials for efficient and stable perovskite solar cells

Huayu Bao et al.

Summary: This study proposes a design strategy to restrict Li+ ion migration by introducing different Lewis base groups into hole transporting materials (HTMs). Phen-TPA-based perovskite solar cells (PSCs) achieve high efficiency and stability due to enhanced conjugation and hole mobility. This work provides new design strategies for efficient and stable PSCs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Bifunctional spiro-fluorene/heterocycle cored hole-transporting materials: Role of the heteroatom on the photovoltaic performance of perovskite solar cells

Bo Xu et al.

Summary: Hole-transporting materials (HTMs) are crucial for perovskite solar cells (PSCs) as they protect the perovskite layer, promote charge extraction, and control costs. This study focuses on the development of multifunctional HTMs to reduce costs and simplify the preparation process of PSCs. Two novel spiro-fluorene/heterocycle cored bifunctional HTMs, SFHc-O and SFHc-S, were designed and synthesized. The sulfur atoms in SFHc-S were found to have a positive impact on hole extraction/transport and defect passivation, resulting in high efficiency and stability of the corresponding PSCs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Applied

Heteroatom engineering on spiro-type hole transporting materials for perovskite solar cells

Xianfu Zhang et al.

Summary: A series of spiro-type hole transporting materials with different terminal groups were designed and prepared, showing improved device performance and reduced hysteresis. The material with half methoxy and half methyl-sulfanyl terminal groups exhibited the best performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A N-Ethylcarbazole-Terminated Spiro-Type Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells

Mingyuan Han et al.

Summary: The development of stable and efficient hole-transporting materials is crucial for the commercialization of perovskite solar cells. In this study, a novel spiro-type HTM called spiro-carbazole was designed and synthesized. The spiro-carbazole-based devices exhibited higher efficiency and improved stability compared to traditional spiro-OMeTAD.

CHEMSUSCHEM (2022)

Add to Collection

Article Chemistry, Physical

Effects of Heteroatom and Extending the Conjugation on Linear Hole-Transporting Materials for Perovskite Solar Cells

Ying Wang et al.

Summary: Investigation of high-performance molecular hole-transporting materials (HTMs) is important for improving perovskite solar cells (PSCs). In this study, four thiophene-arylamine linear HTMs with different pi-bridges were designed and prepared. The effects of heteroatoms and extending conjugation by double bonds on molecular properties and PSC performance were investigated. Molecules with double bonds showed better planarity and more efficient charge transfer, resulting in higher hole mobility and extraction ability. Moreover, molecules with oxygen-based bridges exhibited more planar structures and achieved higher efficiency and stability in PSCs.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Dibenzo heterocyclic-terminated spiro-type hole transporting materials for perovskite solar cells

Yongpeng Liang et al.

Summary: In this study, dibenzofuran and dibenzothiophene were introduced as terminal groups into spiro-type HTMs, and their structure-property relationship was investigated. It was found that the molecule with dibenzofuran terminal groups exhibited better performance in terms of hole mobility, perovskite layer morphology, and hole extraction ability. The PSCs using spiro-DBF achieved a power conversion efficiency of 21.43%, even higher than the conventional spiro-OMeTAD.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Add to Collection

Article Engineering, Environmental

Simple hole-transporting materials containing twin-carbazole moiety and unconjugated flexible linker for efficient and stable perovskite solar cells

Wei-Jie Gao et al.

Summary: Three twin-carbazole-based hole-transporting materials were synthesized and employed in perovskite solar cells, showing different performance in power conversion efficiency. Among them, one HTM exhibited the best efficiency with lower synthetic cost compared to the commercial spiro-OMeTAD, demonstrating the potential of twin-carbazole moieties for enhanced charge transport properties in promising HTMs.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Design of Low Crystallinity Spiro-Typed Hole Transporting Material for Planar Perovskite Solar Cells to Achieve 21.76% Efficiency

Zihao Deng et al.

Summary: Two novel HTMs, SC and ST, were designed in this study to substitute traditional spiro-OMeTAD, with SC showing superior performance in terms of efficiency and stability. Whereas ST exhibits lower efficiency and stability due to its high crystallinity and poor solubility.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

D-A-π-A-D-type Dopant-free Hole Transport Material for Low-Cost, Efficient, and Stable Perovskite Solar Cells

Tianqi Niu et al.

Summary: The development of low-cost and efficient hole transport materials (HTMs) is crucial for commercialization of perovskite solar cells (PSCs). DTB-FL with a D-A-pi-A-D molecular design shows promise in achieving high efficiencies and stability in PSCs, as it features excellent optoelectronic properties and efficient surface passivation effects.

JOULE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Tetraphenylethylene-Arylamine Derivatives as Hole Transporting Materials for Perovskite Solar Cells

Xianfu Zhang et al.

Summary: The study found that HTMs with fused tetraphenylethylene cores and meta-substitution have better performance compared to other HTMs, especially in perovskite solar cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Applied

Hole transporting material with passivating group (CN) for perovskite solar cells with improved stability

Zi'an Zhou et al.

Summary: The introduction of cyano (C N) functional group into hole transporting materials (HTM) in perovskite solar cells has been shown to improve performance, with C N-based HTM exhibiting higher power-conversion efficiency and minor hysteresis compared to non-C N-based HTM. Additionally, devices with C N-based HTM show significantly improved stability compared to non-C N-based HTM.

DYES AND PIGMENTS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Chemistry, Applied

C=N-based carbazole-arylamine hole transporting materials for perovskite solar cells: Substitution position matters

Zi'an Zhou et al.

Summary: By synthesizing HTMs with different C=N substitution positions, this study found that the substitution position of the C=N unit on HTMs significantly affects the device performance. m-HTM and o-HTM exhibit better performance and stability than p-HTM.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Star-shaped D-π-D hole-transporting materials regulated by molecular planarity and their application in efficient perovskite solar cells

Jing Zhou et al.

Summary: In this study, a star-shaped HTM CS-43 was designed with a planar carbazole group as the core unit, resulting in improved HOMO level and hole mobility, leading to significant enhancement in the efficiency and stability of PSC.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Energy & Fuels

Heteroatom effect on linear-shaped dopant-free hole transporting materials for perovskite solar cells

Zi'an Zhou et al.

Summary: In this study, a series of linear-shaped D-pi-D and D-A-D hole transporting materials with different heteroatom-containing bridges were designed and implemented in perovskite solar cells. The results showed that the photoelectric conversion efficiency of the devices decreased gradually with increasing atomic numbers, but molecules containing selenium exhibited the best hole extraction ability. The relatively low conductivity of selenium-based HTMs may limit the device performance due to increased dihedral angles between the bridge and the adjacent triphenylamine side arms.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Physical

High-efficiency planar p-i-n perovskite solar cells based on dopant-free dibenzo [b, d] furan-centred linear hole transporting material

Quan Sun et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA-Free Perovskite Solar Cells

Qin Yao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Carbazole-Based Spiro[fluorene-9,9′-xanthene] as an Efficient Hole-Transporting Material for Perovskite Solar Cells

Do Yoon Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Chemistry, Applied

The donor -dependent methoxy effects on the performance of hole -transporting materials for perovskite solar cells

Mengyuan Li et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Review Chemistry, Physical

A Review on Solution-Processable Dopant-Free Small Molecules as Hole-Transporting Materials for Efficient Perovskite Solar Cells

Luozheng Zhang et al.

SMALL METHODS (2020)

Add to Collection

Article Energy & Fuels

Molecular engineering of highly efficient dopant-free spiro-type hole transporting materials for perovskite solar cells

Yan Zhang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Novel star-shaped D-π-D-π-D and (D-π)2-D-(π-D)2 anthracene-based hole transporting materials for perovskite solar cells

Muniyasamy Harikrishnan et al.

NANOSCALE ADVANCES (2020)

Add to Collection

Article Chemistry, Physical

Molecular engineering of simple carbazole-arylamine hole-transport materials for perovskite solar cells

Xuepeng Liu et al.

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection

Article Chemistry, Physical

Facile synthesis of triphenylamine-based hole-transporting materials for planar perovskite solar cells

Liangsheng Duan et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Energy & Fuels

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

Nam Joong Jeon et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Inverted planar perovskite solar cells with dopant free hole transporting material: Lewis base-assisted passivation and reduced charge recombination

Sang Jin Park et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Applied

Influence of π-linker on triphenylamine-based hole transporting materials in perovskite solar cells

Xuepeng Liu et al.

DYES AND PIGMENTS (2017)

Add to Collection

Article Energy & Fuels

A molecularly engineered hole-transporting material for efficient perovskite solar cells

Michael Saliba et al.

NATURE ENERGY (2016)

Add to Collection

Review Chemistry, Physical

Application of Organic Hole-Transporting Materials in Perovskite Solar Cells

Liu Xue-Peng et al.

ACTA PHYSICO-CHIMICA SINICA (2016)

Add to Collection

Article Chemistry, Multidisciplinary

o-Methoxy Substituents in Spiro-OMeTAD for Efficient Inorganic-Organic Hybrid Perovskite Solar Cells

Nam Joong Jeon et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Efficient small molecule bulk heterojunction solar cells with high fill factors via introduction of π-stacking moieties as end group

Guangrui He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Article Multidisciplinary Sciences

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Hui-Seon Kim et al.

SCIENTIFIC REPORTS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.