Related references
Note: Only part of the references are listed.
Article
Engineering, Chemical
Mingjie Cai et al.
Summary: The artificial S-scheme photocatalysis system, mimicking natural photosynthesis, has shown excellent potential for the photocatalytic degradation of pharmaceuticals and personal care products (PPCPs). In this study, Cd0.5Zn0.5S/Bi2MoO6 S-scheme heterostructures were fabricated and showed significantly improved degradation efficiency of enrofloxacin compared to Cd0.5Zn0.5S and Bi2MoO6 alone. The integration of Cd0.5Zn0.5S with Bi2MoO6 resulted in effective spatial photo-carrier dissolution and optimized photo-redox capacity, leading to enhanced photocatalytic performance and stability. The study also revealed the toxicological analysis of intermediates and showcased the potential of the system for PPPCs degradation in authentic water systems.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Energy & Fuels
Pham Thi Lan Huong et al.
Summary: ZnO/Fe3O4 heteronanostructures exhibited enhanced photocatalytic activity under both UV and visible light, with up to 99.7% degradation efficiency for methylene blue. The enhancement could be explained by electron transfer.
Article
Chemistry, Physical
Jiaqi Qiu et al.
Summary: A series of novel iodine substitution and oxygen vacancy double defects Bi2MoO6 nanosheets were reported for enhanced photocatalytic reduction of CO2 under full solar spectrum illumination, showing superior CO2 photocatalytic activity and CH4 selectivity. Bi2MoO6-I2 with a molar ratio of I to Mo at 0.13 exhibited the highest photocatalytic activity, with CO yield 2.0 times that of pure Bi2MoO6, CH4 yield 12.2 times that of pure Bi2MoO6, and CH4 selectivity reaching 5.3 times that of pure Bi2MoO6. The enhancement in CO2 conversion and CH4 selectivity was attributed to factors such as larger specific surface areas, suitable band structure, insertion of impurity energy levels, double defects, and optimized formation energy of reaction intermediates.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Physical
Yujie Du et al.
Summary: Organic synthesis driven by solar energy is gaining attention for its advantages of selectivity and milder reaction conditions. However, the inefficient utilization efficiency due to slow charge separation limits its catalytic performance. Assembling 0D/2D Z-schemed semiconductor nano-heterojunctions can be a promising solution. In this study, 0D/2D carbon nitride quantum dots (CNQDs)/Bi2MoO6-x (BMO-OD) was synthesized, showing superior catalytic activity for amine oxidation coupling under ambient conditions. The design and synthesis of 0D/2D CNQDs/BMO-OD can enhance the photoinduced charge carriers' separation kinetics, promoting the photocatalytic oxidation coupling of amines under mild conditions.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Physical
Ruchi Aggarwal et al.
Summary: Visible-light-driven photocatalytic water splitting is a promising approach for hydrogen generation. Onion-like carbon nano particles (OCNPs) isolated from diesel engine exhaust soot have shown strong capability for visible-light promoted hydrogen evolution. The high hydrogen evolution rate of OCNPs under visible light irradiation, comparable with literature values without dopants or co-catalysts, is attributed to the presence of optically active centers and a high sp(3)/sp(2) interface on the OCNPs surface, promoting the process of visible-light assisted photocatalytic water splitting. These waste derived OCNPs can serve as high-performance photocatalytic materials for visible light-to-hydrogen production, contributing to the goal of achieving clean energy.
Article
Chemistry, Physical
Chunyu Yuan et al.
Summary: Properly engineered heterojunction photocatalysts can effectively separate photoexcited electron-hole pairs and improve the photocatalytic hydrogen evolution performance. In this study, 3D bicontinuous nanoporous reduced graphene oxide (np-rGO) was used as a supporting matrix for CdS nanoparticles to achieve a highly efficient photocatalysis system for hydrogen production. The bicontinuous internal ligament and open nanopores in the 3D nanoporous heterojunction contribute to improved light absorption and utilization capacity. The construction of a p-n heterojunction with staggered band alignment in CdS/np-rGO accelerates the transport of photo-excited carriers, leading to a significant increase in hydrogen generation rate.
Article
Engineering, Environmental
Zhenzhou Wang et al.
Summary: The design of photocatalysts that can generate local surface plasmon resonance effect is crucial for improving photocatalytic activity. By loading different amounts of Ag quantum dots on ultrathin carbon nitride sheets, a Schottky junction is formed, which enhances visible-light absorption and accelerates the electron transfer rate at the interface. Ag/UCN also exhibits antibacterial activity and is effective in pharmaceutical wastewater treatment.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Environmental Sciences
Ning Ding et al.
Summary: Photocatalysis has the potential to remove harmful algae using solar energy. This study proposes a mechanism for the photocatalytic inactivation of harmful algae and provides guidance for the design and construction of highly active composite photocatalysts.
Article
Green & Sustainable Science & Technology
Yonglei Xing et al.
Summary: Cu-doped Bi2O2S catalysts with abundant oxygen vacancies (abbreviated Cu/BOS-OV) were prepared via calcination of one-step hydrothermally synthesized Cu-doped Bi2O2S. The introduction of impurity bands by Cu doping and oxygen vacancies improved the photodegradation efficiency of tetracycline (TC) under visible light. In addition, the activation of peroxymonosulfate (PMS) by oxygen vacancies and copper ions further enhanced the TC degradation efficiency. The study also proposed the possible decomposition process of TC and identified the participation of several free radicals in TC degradation.
JOURNAL OF CLEANER PRODUCTION
(2023)
Article
Engineering, Environmental
Poulomi Sarkar et al.
JOURNAL OF HAZARDOUS MATERIALS
(2023)
Article
Engineering, Chemical
Tianyu Liu et al.
Summary: Recently, the Z-scheme photocatalytic system has attracted attention and been extensively studied due to its efficient charge transfer and separation. In this study, a Z-scheme ZnIn2S4/CdS hybrid nanostructure was successfully prepared, where ZnIn2S4 nanosheets were decorated onto hollow CdS nanocubes. The ZIS/CdS exhibited outstanding performance in photocatalytic reactions such as H2 evolution and antibiotic removal. The generation of heterojunction interfaces and internal electric field (IEF) between ZnIn2S4 and CdS facilitated charge separation and transfer, leading to improved photocatalytic activity. This paper may provide an effective protocol for the fabrication and application of hollow sulfide-based nanostructures.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Energy & Fuels
Changqing Zhou et al.
Summary: A 2D/2D Z-scheme ZnTi-LDH/Cu-FeTCPP MOF heterojunction without photosensitizer and organic sacrificial agent was designed for photocatalytic CO2 reduction. The optimized ZnTi-LDH/Cu-FeTCPP MOF photocatalyst exhibited high activity with a CO yield 28 and 26 times higher than those of ZnTi-LDH and Cu-FeTCPP MOF respectively. The increased activity was attributed to the contact of Cu-FeTCPP MOF and ZnTi-LDH, which enhanced CO2 adsorption and light utilization. The study provides important strategies for designing effective LDHs/MOFs Z-scheme heterojunction photocatalysts for CO2 photocatalytic reduction.
Article
Chemistry, Physical
Chunchun Wang et al.
Summary: This study presents a visible-light-driven organic-inorganic S-scheme heterostructure photocatalyst with excellent performance in removing antibiotics from wastewater. By anchoring TCPP on the surface of Bi12O17Cl2, the S-scheme junction between TCPP and Bi12O17Cl2 was created, enhancing the visible-light response and accelerating the disintegration and conservation of photo-carriers. The resulting TCPP/Bi12O17Cl2 showed significantly improved photocatalytic activity and stability compared to Bi12O17Cl2. Through scavenging tests, LC-MS analysis, and toxicity calculation, the reactive radicals, degradation pathway, and eco-toxicity were elucidated. This research demonstrates the potential practicality of porphyrin-based S-scheme heterojunction photocatalysts for efficient antibiotic removal.
APPLIED SURFACE SCIENCE
(2023)
Article
Engineering, Environmental
Decheng Zhao et al.
Summary: Uniform small iron vanadate nanoparticles grown on reduced graphene oxide form a conductive-network, which exhibits stable high capacity, remarkable rate capability, and excellent long-cycle stability, making it an ideal anode material for high-rate and durable lithium and sodium-ion batteries.
CHEMICAL ENGINEERING JOURNAL
(2023)
Review
Engineering, Environmental
Linfang Lu et al.
Summary: The study of noble metal nanocatalysts is important for electrocatalysis. Ligand-free synthesis is a simple and efficient method that reduces the cost of catalyst synthesis and is suitable for industrial production. However, there are still some problems to be solved.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Environmental
Muhammad Sultan Irshad et al.
Summary: This study reports a highly efficient solar evaporator with improved evaporation rate and resistance to salt accumulation. The system is achieved by depositing Fe3O4@PPy nanospheres on a self-floating cellulose evaporator and optimizing the positive charge density of R-NH+ groups. It also demonstrates the capability to generate electricity from solar energy.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Environmental Sciences
Samriti et al.
Summary: This study reports the synthesis and characterization of highly efficient TiO2 nanorods (NRs) and Ta-doped TiO2 NRs (Ta-TiO2 NRs) for multifunctional applications. The NRs showed promising optical properties and exhibited excellent photocatalytic activities and surface-enhanced Raman scattering (SERS) performance. Ta-TiO2 NRs showed enhanced response due to the additional defects introduced by Ta doping, which resulted in improved visible light absorption and charge transfer properties.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
(2023)
Article
Chemistry, Physical
Feng-Zao Chen et al.
Summary: Multifunctional heterojunctions, based on function-and structure-oriented material design and accurate synthesis, have emerged as an important platform in materials chemistry with great application prospects for solving practically complex science and engineering problems.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Article
Engineering, Chemical
Min Zhang et al.
Summary: Construction of carbon-based heterostructural photocatalyst materials with high electron transfer rates is an effective strategy for organic pollutant mineralization and toxic metal ion removal under visible-light irradiation. This study developed a facile hydrothermal route to prepare a series of heterojunction photocatalysts, which exhibited excellent photocatalytic activity for degradation of tetracycline hydrochloride and reduction of Cr(VI). Notably, the photocatalysts showed good activity and stability even after cycle experiment. This study provides new insights into the design of carbon-based heterojunction photocatalysts for the removal of harmful chemicals.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Engineering, Environmental
Yuelin Gu et al.
Summary: Nanocatalysts prepared by ligand-free synthesis method exhibit superior catalytic activity without ligand interference. In this study, ligand-free PtPdCu ternary nanocatalysts with controlled morphologies and sizes were successfully fabricated using the Cu2O template sacrificial method. These nanocatalysts showed enhanced activity and stability for the methanol oxidation reaction due to their synergistic ternary composition, distinct morphology, and unique surface electronic configuration. This work provides novel insights into the ligand-free synthesis of morphology-regulated and multi-component-controlled nanocatalysts for high-performance catalysis.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Environmental Sciences
Shu-Ting Li et al.
Article
Chemistry, Physical
Min Zhang et al.
Summary: The MnxCd1_xIn2S4 solid solutions with tunable band edge positions were fabricated to enhance the separation efficiency of charge carriers in photocatalytic reactions. The Mn0.5Cd0.5In2S4/g-C3N4 nanocomposites exhibit superior performance and a type-II heterojunction photocatalytic mechanism is proposed to explain the transfer path of charge carriers.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Review
Chemistry, Multidisciplinary
Liuyang Zhang et al.
Summary: This article presents the superiority and design criteria of the emerging S-scheme heterojunction in photocatalysis. By overcoming the challenges faced by single photocatalysts through the construction of heterojunctions, the S-scheme heterojunction has demonstrated its potential in improving photocatalysis. The critical understanding of the curved Fermi level in the S-scheme heterojunction interface and the current challenges and prospects of S-scheme heterojunction photocatalysts are also discussed.
ADVANCED MATERIALS
(2022)
Article
Materials Science, Ceramics
Hua Lv et al.
Summary: Constructing heterojunction photocatalytic systems with highly spatial charge separation, strong photoredox ability, and rapid surface reaction remains a significant challenge. In this study, a novel hierarchically direct Z-scheme Mn0.5Cd0.5S/CdWO4 heterojunction photocatalyst, decorated with hollow CoSx polyhedrons, is constructed using a simple sonochemical approach and subsequent in situ deposition route. The resulting Mn0.5Cd0.5S/CdWO4/CoSx ternary composite exhibits significantly enhanced photoactivity for H2 generation compared to other samples, thanks to its efficient charge transfer channels, strong photoredox ability, and the unique hollow structure of CoSx polyhedrons that provides abundant surface-active sites and improves light-harvesting capacity.
CERAMICS INTERNATIONAL
(2022)
Article
Energy & Fuels
Yue Jiang et al.
Summary: A direct Z-scheme 0D/2D heterojunction of CuO Quantum dots/ultrathin CoAl-LDH was successfully fabricated for photocatalytic CO2 reduction. The heterojunction exhibited enhanced photocatalytic performance due to effective charge transfer and separation, as well as prominent optical absorption property.
Article
Nanoscience & Nanotechnology
Zhangxin Chen et al.
Summary: Improving the electrocatalytic properties of supported metals by regulating the surface electronic structure is a hot topic in electrocatalysis. In this study, two novel catalysts, Pd/B-N-Ti3C2 and Pd/N-B-Ti3C2, were used to explore the effect of B and N co-doping sequence on the surface electronic structure of metals and the electrocatalytic properties of ethanol oxidation reaction. The results showed that the Pd/B-N-Ti3C2 catalyst outperformed the Pd/N-B-Ti3C2 catalyst in terms of electrochemical surface area, maximum peak current density, and antitoxicity. The different properties of the catalysts can be attributed to the various doping species of B and N, which significantly affect the surface electronic structure and size distribution of supported metal Pd. Density functional theory calculations further revealed that B-doped species can provide reaction sites, facilitating the progress of the ethanol oxidation reaction along a favorable pathway.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Engineering, Chemical
Mahboube Hajiali et al.
Summary: The integration of Bi2MoO6 with MIL-101(Fe) as a novel structure enhanced the photocatalytic activity for RhB degradation. The optimal molar ratio of Bi2MoO6:MIL-101(Fe) equal to 1:1 showed better photocatalytic activity. The study also investigated the effects of pH, reaction time, catalyst concentration, and dye concentration on the removal performance of RhB. Holes and superoxide radicals played a major role in the degradation process. Additionally, the addition of salt had a negative effect on the photocatalytic performance at low concentrations.
ADVANCED POWDER TECHNOLOGY
(2022)
Article
Engineering, Environmental
Ridha Djellabi et al.
Summary: In recent years, the use of solar-driven steam materials and systems for water desalination and decontamination has gained attention. This report critically reviews the recent advances in the engineering of solar-driven steam materials and discusses the challenges that limit their large-scale application. Various materials and approaches to tackle technology shortcomings are compared and discussed, including salt accumulation, light reflection, and biofouling. Furthermore, the addition of photocatalysts to solar-driven water evaporators is explored for enhanced purification.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Environmental Sciences
Anirban Chakraborty et al.
Summary: This review focuses on the hydrothermal synthesis of three-dimensional titanium dioxide nanoflower structures (3D TiO2 NFs) and the effect of shape/size and other key synthesis parameters on their optoelectronic and photocatalytic properties. The strategies to improve their photocatalytic properties, such as doping engineering and the formation of heterojunction/nanocomposites with other functional nanomaterials, are also discussed, along with their potential applications in the photocatalytic degradation of various emerging pollutants in wastewater.
ENVIRONMENTAL RESEARCH
(2022)
Article
Engineering, Chemical
Chen-Yang Pei et al.
Summary: This study systematically investigates the nitrogen photofixation over well-designed oxygen vacancies and interface coordinately modulated WO3/InVO4 samples. The results show that interface modulation can significantly enhance catalytic activity for nitrogen photofixation, especially in the optimized 70 wt% WO3/InVO4 hybrid system with oxygen vacancies.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Multidisciplinary
Bowen He et al.
Summary: This paper presents a floatable composite photocatalyst that overcomes the limitations of traditional powder photocatalysts and improves the efficiency of photocatalytic reactions. By immobilizing hydrophobic TiO2 and Bi2O3 on lightweight polystyrene spheres, the floatable photocatalyst enhances the contact between reactants and photocatalysts, leading to a significantly enhanced yield of H2O2 and improved conversion of furfuryl alcohol.
ADVANCED MATERIALS
(2022)
Article
Biophysics
Javad Hassanzadeh et al.
Summary: This study presents an economical and portable point-of-care monitoring device for multiple detection purposes. The device utilizes a disposable microfluidic paper-based analytical device and a smartphone readout. The device achieves simultaneous quantification of glucose, fructose, sucrose, and maltose, and demonstrates excellent detection limits and reliability compared to traditional methods. It has potential applications in medical diagnostics and the food industry, and can be a competitive tool for patients in disadvantaged communities or emergencies.
BIOSENSORS & BIOELECTRONICS
(2022)
Article
Engineering, Chemical
Chen-Xiao Xu et al.
Summary: In this study, a FeTiO3/g-C3N4 hybrid architecture was synthesized via self-assembly and used as an efficient visible-light-driven photo-Fenton catalyst for pollutant degradation. The remarkable photo-Fenton activity of this hybrid architecture was attributed to the S-scheme charge transfer pathway generated by the intimate interfacial contacts between FeTiO3 and g-C3N4. This research provides useful insights for the design and fabrication of S-scheme photo-Fenton catalysts for environmental remediation.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Physical
Jiawei Xia et al.
Summary: The constant evolution of photocatalysis using polymeric carbon nitride materials has led to the improvement of activity by tackling intrinsic limitations. The controlled carbon-doped porous CN rods have shown enhanced hydrogen evolution reaction efficiency and demonstrated selective oxidation reaction of aromatic alcohols.
Article
Engineering, Chemical
Hongfei Yin et al.
Summary: Energy crisis and environmental problems caused by Cr(VI)-containing wastewater have attracted increasing attention due to the rapid development of human society. In this study, CeO2/CdS nanocomposites were successfully fabricated for photocatalytic hydrogen evolution and Cr(VI) reduction. The hybrid catalysts exhibited remarkable photocatalytic activities, surpassing the single components. The improved performance can be attributed to the unique electron and hole transfer pathway.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Review
Nanoscience & Nanotechnology
Bhaskar Bhaduri et al.
Summary: Spinel ferrite nanostructures have promising magnetic properties, high resistivity, stability, and low eddy current losses. Their utilization in water remediation and catalysis applications shows great potential for practical applications.
ACS APPLIED NANO MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Yuning Jin et al.
Summary: This paper reports a novel iron-based metal-organic framework (MOF) photocatalyst that combines different building blocks to enhance the capture and degradation of antibiotics. The MIL-101(Fe)@MIL-100(Fe) photocatalyst exhibits excellent photocatalytic activity for tetracycline degradation, surpassing previous reported results. Additionally, it shows remarkable stability, maintaining high photocatalytic activity after multiple cycles.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Engineering, Environmental
Fei Gao et al.
Summary: A one-step hydrothermal method is used to synthesize ZnMn2O4 (ZMO) nanoparticles/carbon nanotubes (ZMO/CNTs) composite for stable high-rate zinc-ion storage. The high electrical conductive CNTs and small ZMO particles enhance the electrical conductivity of the composite, and the flexible CNTs network and strong interface interaction suppress structural degradation. The ZMO/CNTs composite exhibits high rate capability and long-term cycling stability.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Jiayun Guo et al.
Summary: This study explores the potential of heterojunctions consisting of covalent organic frameworks (COFs) with adjustable structures and other photocatalysts in the field of photocatalysis. The authors fabricate TPB-TP-COFs with different substituents (-H, -OH, -OCH3, -Br, and -F groups) and demonstrate that only the -OCH3 groups significantly enhance the photocatalytic performance. DFT calculation further reveals the impact of substituents on electron cloud distribution and charge transport. This research highlights the importance of regulating the electronic effects of semiconductors in improving photocatalytic performance in organic heterojunctions.
SCIENCE CHINA-CHEMISTRY
(2022)
Article
Engineering, Chemical
Hao Yang et al.
Summary: S-scheme hybrid MIL-101(Fe)/WO3 samples were prepared by immobilizing MIL-101(Fe) nanoparticles on the surface of WO3 nanoplates. The resulting hybrid sample exhibited highly efficient visible light-driven photocatalytic activity and good photostability, making it effective for the removal of TCH.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Multidisciplinary
Jian Zhang et al.
Summary: A facile and scalable atomic-level di-defect strategy has been reported in this study to improve the electrocatalytic hydrogen evolution reaction (HER) performance through defect engineering of VSe2 nanoflakes. The di-defect configuration effectively triggers the electrocatalytic activity of the inert VSe2 basal plane, leading to superior performance compared to previously reported non-noble metal HER electrocatalysts.
Article
Energy & Fuels
Ying Liu et al.
Summary: In this work, amorphous NiB-modified Mn0.5Cd0.5S (NBMCS) was prepared using a simple stirred method. The NBMCS material exhibited enhanced light absorption ability, better separation of photo-generated carriers, lower overpotential, and stronger reduction capacity. When used for water splitting to produce H2, NBMCS showed a significantly higher hydrogen precipitation rate compared to bare Mn0.5Cd0.5S and 1% Pt/Mn0.5Cd0.5S, while maintaining good stability. Therefore, this inexpensive and effective cocatalyst has the potential to be widely utilized in the field of solar energy conversion.
Article
Green & Sustainable Science & Technology
Prasenjit Kar et al.
Summary: This study investigates the modulation of defect state in TiO2 for the degradation of pharmaceutical pollutants under visible light irradiation. The results demonstrate that defective-TiO2 particles show improved photocatalytic activity due to a reduction in bandgap and reduced electron-hole recombination. The developed defective-TiO2 particles have potential applications in real-world wastewater treatment.
ADVANCED ENERGY AND SUSTAINABILITY RESEARCH
(2022)
Article
Green & Sustainable Science & Technology
Yan Zhang et al.
Summary: The study introduced a novel porous co-photocatalyst to decorate carbon fibers, which can efficiently remove pharmaceutical pollutants and exhibit enhanced performance under visible light irradiation.
JOURNAL OF CLEANER PRODUCTION
(2021)
Article
Materials Science, Ceramics
Tianjun Ni et al.
Summary: A noble-metal-free MoS2/g-C3N4/ZnIn2S4 ternary heterostructure with a hierarchical flower-like architecture was developed for efficient hydrogen generation from photocatalytic water splitting. The optimized nanocomposite displayed significantly enhanced hydrogen evolution activity, attributed to multichannel charge transfer and suitable band-edge alignments in the composites, enabling efficient electron-hole separation and high photoactivity. Moreover, the ternary heterostructure showed promising stability during the photoreaction process, making it suitable for practical applications in solar hydrogen production.
CERAMICS INTERNATIONAL
(2021)
Article
Engineering, Environmental
Yangjie Fu et al.
Summary: Visible-light-active MR/NH2-MIL-125(Ti) homojunction with optimal photocatalytic performance was successfully synthesized via post-synthetic modification. The photocatalytic reduction of Cr(VI) on MR/NH2-MIL-125(Ti) exhibited significantly higher rate constants compared to NH2-MIL-125(Ti) and MR-MIL-125(Ti), showing good stability after cyclic runs. The enhanced photocatalytic performance was attributed to improved separation and transfer of photogenerated electron-hole pairs, making it a promising candidate for treating Cr(VI)-containing wastewaters.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Electrochemistry
Zhangxin Chen et al.
Summary: In this study, a novel N-doped Ti3C2 supported Pd-based catalyst with higher content of Pd and excellent electrochemical performance was successfully prepared. It showed higher electrochemically active surface areas, ethanol oxidated current densities, and electrochemical stability compared to other catalysts, making it a potential candidate for ethanol electrooxidation in alkaline medium.
ELECTROCHIMICA ACTA
(2021)
Article
Chemistry, Multidisciplinary
Jiawei Xia et al.
Summary: The photocatalytic performance of carbon nitride (CN) materials is influenced by intrinsic defects and structural properties. The fabrication of photoactive porous CN rods through thermal condensation of melem-based hexagonal supramolecular assemblies results in a well-ordered structure with fewer defects. The new CN materials exhibit high specific surface area, good light-harvesting properties, enhanced charge separation and migration, and excellent photocatalytic activity and durability towards hydrogen evolution reaction (HER) and CO2 reduction reaction (CO2RR).
Article
Chemistry, Multidisciplinary
Prasenjit Kar et al.
Summary: The development of a visible light photocatalytic Fe2O3@BC/ACF heterojunction on activated carbon fiber support shows promising applications for wastewater treatment, particularly in degrading emerging pharmaceutical pollutants. The high photocatalytic activity is attributed to the interfacial tuning of the heterojunction and overall charge carrier separation on the bismuth carbonate surface with different loading of Fe2O3 nanoparticles.
REACTION CHEMISTRY & ENGINEERING
(2021)
Article
Engineering, Environmental
Bhawna Sharma et al.
Summary: In this study, GumT-cl-HEMA hydrogel was synthesized with maximum swelling achieved by green polymerization technique, and further modified using TiO2 nanoparticles to create GumT-cl-HEMA/TiO2 hydrogel composite. The composite showed increased adsorption rates and stability, successfully removing malachite green dye from water.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2021)
Article
Nanoscience & Nanotechnology
Kejie Zhang et al.
Article
Chemistry, Physical
Lu Wang et al.
JOURNAL OF POWER SOURCES
(2020)
Article
Chemistry, Physical
Feiping Zhao et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2020)
Article
Chemistry, Multidisciplinary
Bing-Cai He et al.
Article
Chemistry, Physical
Wei Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2020)
Article
Engineering, Environmental
Han Hu et al.
CHEMICAL ENGINEERING JOURNAL
(2019)
Article
Energy & Fuels
Pratyush Jain et al.
Article
Engineering, Environmental
Prasenjit Kar et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2019)
Article
Chemistry, Multidisciplinary
Rui Lin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2018)
Article
Chemistry, Multidisciplinary
Bui The Huy et al.
ADVANCED MATERIALS INTERFACES
(2017)
Article
Multidisciplinary Sciences
Yangen Zhou et al.
NATURE COMMUNICATIONS
(2015)
