☆ 4.8 Article

Effect of Secondary Heat Treatment after a Washing on the Electrochemical Performance of Co-Free LiNi0.975Al0.025O2 Cathodes for Li-Ion Batteries

SMALL (2023)

Related references

Note: Only part of the references are listed.

Article Electrochemistry

Correlation of aluminum doping and lithiation temperature with electrochemical performance of LiNi1-xAlxO2 cathode material

Juho Valikangas et al.

Summary: This article presents a process for producing LiNi1-xAlxO2 (0 < x < 0.05) cathode material with high capacity and enhanced cycle properties. The cathode material is prepared by mixing coprecipitated Ni(OH)(2) with LiOH and Al(OH)(3), followed by lithiation and washing process. The electrochemical performance and structure changes of the cathode material are investigated through full-cell and half-cell applications, as well as different material characterization methods.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of the structure and ionic conductivity of a Li3InCl6 modified by dry room annealing for solid-state Li-ion battery applications

Palanivel Molaiyan et al.

Summary: Progress in new sustainable technologies relies on the development of battery materials that are safer, low-cost, and have higher energy density. The use of halide solid electrolytes (HSEs) has shown promise due to their high ionic conductivity, deformability, and oxidative stability. This study investigates the synthesis of Li3InCl6 (LIC) HSEs using ball-milling followed by dry room annealing, and analyzes the crystal structure, particle size, and ionic conductivity of the material. The research also explores the lithium diffusion in the LIC samples using pulsed-field gradient and relaxation time NMR measurements.

MATERIALS & DESIGN (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Probing the Ni(OH)2 Precursor for LiNiO2 at the Atomic Scale: Insights into the Origin of Structural Defect in a Layered Cathode Active Material

Anuj Pokle et al.

Summary: In lithium ion batteries, high nickel content layered cathode materials are critical for achieving high energy densities. Achieving perfect stoichiometry is challenging and can result in structural issues and capacity fade. Defects in commercially relevant cathode materials largely originate from the precursor materials, highlighting the importance of careful synthesis parameters.

SMALL (2023)

Add to Collection

Review Chemistry, Physical

Air Instability of Ni-Rich Layered Oxides-A Roadblock to Large Scale Application

Wujiu Zhang et al.

Summary: This review comprehensively and critically explores the issue of air instability in Ni-rich layered oxides and reviews various modification strategies. The authors propose further research and provide perspectives for achieving practical applications of Ni-rich layered oxides.

ADVANCED ENERGY MATERIALS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Understanding the Insight Mechanism of Chemical-Mechanical Degradation of Layered Co-Free Ni-Rich Cathode Materials: A Review

Hang Li et al.

Summary: Layered Cobalt (Co)-free Nickel (Ni)-rich cathode materials have high energy density and low cost, but their further development is hindered by material instability. Although there are numerous approaches to improve the stability of these materials, they are still in the laboratory stage and require further research for commercial application. Understanding the phase transition mechanism and addressing crystal structure degradation and interfacial instability are important for the development of Co-free Ni-rich materials.

SMALL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Degradation Pathways of Cobalt-Free LiNiO2 Cathode in Lithium Batteries

Ruijun Pan et al.

Summary: Electrode-electrolyte reactivity (EER) is found to have a greater impact on the cycling stability of LiNiO2 cathodes than particle cracking (PC) in lithium-based batteries. EER leads to primary particle cracking but mitigates secondary particle cracking due to the inhibition of H2-H3 phase transformation. The surface degradation pathways of cycled LiNiO2 are identified under low and high EER conditions, revealing the formation of an electrochemically-inactive SRL with Ni3O4 and NiO phases under high EER and an electrochemically-active SRL with LiNi2O4 phase under low EER.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Localized High-Concentration Electrolytes with Low-Cost Diluents Compatible with Both Cobalt-Free LiNiO2 Cathode and Lithium-Metal Anode

Zezhou Guo et al.

Summary: High-nickel layered oxide cathodes and lithium-metal anode with localized high-concentration electrolytes (LHCEs) show desirable performance in terms of Coulombic efficiency and capacity retention. The stable cell operation is attributed to well-tuned electrode-electrolyte interphases and Li deposition morphology. The study provides insights into the role of diluents in LHCEs and offers valuable guidance for further optimization of high energy density lithium-metal batteries.

SMALL (2023)

Add to Collection

Review Chemistry, Physical

Perspectives on Improving the Safety and Sustainability of High Voltage Lithium-Ion Batteries Through the Electrolyte and Separator Region

Heather Cavers et al.

Summary: This review provides an overview of recent developments in the electrolyte region of lithium-ion batteries (LIBs), including liquid electrolytes, ionic liquids, gel polymer electrolytes, separators, and solid electrolytes. The focus is on improving the safety of these systems, with some insights on cost and environmental impact. The new information is encouraging for the development of high-voltage LIBs and serves as a guide for potential strategies to improve their safety.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Challenges and prospects of nickel-rich layered oxide cathode material

Sidra Jamil et al.

Summary: This review article provides a comprehensive overview of the advantages and challenges of Ni-rich layered oxide cathode materials in terms of high energy density and high operating voltage, and summarizes the latest improvement methods. In addition, it explores the compatibility and interface challenges of Ni-rich cathodes with solid-state electrolytes, as well as the practical application prospects in the field of electromobility.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Electrochemistry

A comparison of high voltage outgassing of LiCoO2, LiNiO2, and Li2MnO3 layered Li-ion cathode materials

Joseph K. Papp et al.

Summary: This study investigates the gas evolution during lithium extraction in conventional layered oxides at high voltage, highlighting significant differences in outgassing among materials, with LMO exhibiting sustained O-2 release and CO2 evolving to varying extents. This quantitative analysis emphasizes the importance of transition metal composition in understanding the chemistry of conventional Li-ion battery materials.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Electrochemistry

Li2CO3 decomposition in Li-ion batteries induced by the electrochemical oxidation of the electrolyte and of electrolyte impurities

Anna T. S. Freiberg et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Precipitation and Calcination of High-Capacity LiNiO2 Cathode Material for Lithium-Ion Batteries

Juho Valikangas et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Electrochemistry

Impact of Dopants (Al, Mg, Mn, Co) on the Reactivity of LixNiO2 with the Electrolyte of Li-Ion Batteries

Marc M. E. Cormier et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Capacity Fading of Ni-Rich Li[NixCoyMn1-x-y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

Hoon-Hee Ryu et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Electrochemistry

Updating the Structure and Electrochemistry of LixNiO2 for 0 <= x <= 1

Hongyang Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Cost and energy demand of producing nickel manganese cobalt cathode material for lithium ion batteries

Shabbir Ahmed et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Electrochemistry

Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Physical

Structural Stability of LiNiO2 Cycled above 4.2 V

Chong S. Yoon et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Electrochemistry

Hydrolysis of Ethylene Carbonate with Water and Hydroxide under Battery Operating Conditions

Michael Metzger et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection

Article Electrochemistry

Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2

Dae-Hyun Cho et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Washing effects on electrochemical performance and storage characteristics of LiNi0.8Co0.1Mn0.1O2 as cathode material for lithium-ion batteries

Xunhui Xiong et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries

Hyung-Joo Noh et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

Investigation and improvement on the storage property of LiNi0.8Co0.2O2 as a cathode material for lithium-ion batteries

Hansan Liu et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Electrochemistry

Washing effect of a LiNi0.83Co0.15Al0.02O2 cathode in water

J Kim et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2006)

Add to Collection

Article Chemistry, Physical

Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power

GV Zhuang et al.

JOURNAL OF POWER SOURCES (2004)

Add to Collection

Article Electrochemistry

Surface characterization of electrodes from high power lithium-ion batteries

AM Andersson et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.