☆ 4.8 Article

Manipulating Redox Kinetics using p-n Heterojunction Biservice Matrix as both Cathode Sulfur Immobilizer and Anode Lithium Stabilizer for Practical Lithium-Sulfur Batteries

SMALL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Design of Quasi-MOF Nanospheres as a Dynamic Electrocatalyst toward Accelerated Sulfur Reduction Reaction for High-Performance Lithium-Sulfur Batteries

Dan Luo et al.

Summary: This study presents a strategy to design quasi-MOF nanospheres as sulfur electrocatalysts by incorporating a transition-state structure between MOF and metal oxides via controlled ligand exchange strategy. The quasi-MOF inherits the porous structure of MOF and exposes abundant metal nodes to act as active sites for strong LiPs absorbability, resulting in remarkable catalytic activity and long-term cycling stability in Li-S batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Lithium Trithiocarbonate as a Dual-Function Electrode Material for High-Performance Lithium-Sulfur Batteries

Hyunki Sul et al.

Summary: This study uses Li2CS3-coated Li2S as a dual-function cathode material to improve the cycling performance of Li-S batteries. Li2CS3 forms an oligomer-structured layer on the cathode surface to suppress polysulfide shuttle, while a stable solid electrolyte interphase layer is formed on the anode to enhance lithium plating/stripping performance. The resulting full cells with Li2CS3 exhibit superior capacity retention over 125 cycles.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Porous organic polymers for Li-chemistry-based batteries: functionalities and characterization studies

Dan Luo et al.

Summary: This review provides an overview of porous organic polymers (POPs) in Li-chemistry-based batteries, including their classification, functions, future application prospects, and the importance of structural investigation during electrochemical processes.

CHEMICAL SOCIETY REVIEWS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Design of Multifunctional Integrated Host Configuration with Lithiophilicity-Sulfiphilicity toward High-Performance Li-S Full Batteries

Yunhong Wei et al.

Summary: In this study, a conductive composite architecture consisting of bio-derived N-doped porous carbon fiber bundles with embedded cobalt and niobium carbide nanoparticles was used to address the challenges in Li-S batteries. It was found that the niobium carbide nanoparticles could regulate the lithium and sulfur electrochemistry simultaneously, resulting in excellent rate performance and cycling life of the assembled Li-S batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Synthesis of Heterostructured MoS2-MoO3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium-Sulfur Batteries

Da Lei et al.

Summary: A novel MoS2-MoO3/CS composite was designed and synthesized to modify the separator of lithium-sulfur batteries, showing strong surface affinity toward polysulfides and good catalytic activity. The composite exhibited high discharge capacity, good cycling stability, and low discharge capacity decay rate, offering a facile design for high-performance Li-S batteries.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing Polysulfide Confinement and Electrochemical Kinetics by Amorphous Cobalt Phosphide for Highly Efficient Lithium-Sulfur Batteries

Rui Sun et al.

Summary: The application of amorphous cobalt phosphide as a sulfur host in Li-S batteries has successfully addressed the shuttle effect and sluggish redox kinetics, improving the chemical adsorption capability and redox kinetics for enhanced performance. This study contributes to the development of highly efficient Li-S batteries by exploring the application potential of amorphous materials.

ACS NANO (2021)

Add to Collection

Article Multidisciplinary Sciences

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Dan Luo et al.

Summary: A stable multifunctional solid electrolyte interface (SEI) can be constructed by employing electrolyte additives containing catechol and acrylic groups via in-situ anionic polymerization, leading to uniform Li deposition and dendrite-free anode in lithium metal batteries. This strategy offers remarkable cycling performance with high current density, ultra-long cycle life, high cumulative capacity, and stable cycling under high temperature conditions.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Bimetallic Hollow Tubular NiCoOx as a Bifunctional Electrocatalyst for Enhanced Oxygen Reduction and Evolution Reaction

Yafei Xue et al.

Summary: The study developed a facile strategy to synthesize hollow tubular bimetallic Ni-Co oxide, enhancing its bifunctionality and redox reaction kinetics, showing admirable electrocatalytic activities. The optimized sample with a specific mass ratio of Ni and Co displayed comparable oxygen reduction reaction (ORR) performance to commercial catalysts and superior oxygen evolution reaction (OER) performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Chemistry, Physical

Recent Advances in Heterostructure Engineering for Lithium-Sulfur Batteries

Shaozhuan Huang et al.

Summary: Lithium-sulfur batteries show promise as a next-generation energy storage solution due to their economic attractiveness and high energy density, but face challenges such as the shuttling effect of lithium polysulfides and uncontrollable Li dendritic formation. Various strategies have been proposed to address these issues, with a focus on trapping polysulfides, catalyzing their conversion, and regulating Li plating/stripping. Designing and constructing heterostructured materials is seen as a promising approach to potentially resolve these challenges.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

ZnS-SnS@NC Heterostructure as Robust Lithiophilicity and Sulfiphilicity Mediator toward High-Rate and Long-Life Lithium-Sulfur Batteries

Weiqi Yao et al.

Summary: By optimizing the lithiophilicity and sulfiphilicity, the ZnS-SnS@NC heterostructure demonstrates excellent sulfur electrochemistry with high reversibility, high rate performance, and long cycle life. This work provides a feasible scheme for the rational design of bimetal sulfides heterostructures and promotes the development of other electrochemical applications.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Engineering of Bifunctional Niobium (V)-Based Heterostructure Nanosheet Toward High Efficiency Lean-Electrolyte Lithium-Sulfur Full Batteries

Haodong Shi et al.

Summary: A novel twinborn holey Nb4N5-Nb2O5 heterostructure is designed as a dual-functional host for high-efficiency Li-S batteries, accelerating the redox reactions at the sulfur cathode and inhibiting dendrite growth at the lithium anode.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Emerging of Heterostructure Materials in Energy Storage: A Review

Yu Li et al.

Summary: This review discusses the recent progress in heterostructure materials in the field of energy storage, summarizing their fundamental characteristics, synthesis routes, advantages and drawbacks, as well as their applications and achievements in various batteries and supercapacitors.

ADVANCED MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Heterostructural perovskite solar cell constructed with Li-doped p-MAPbI(3)/n-TiO2 PN junction

Yujiao Li et al.

Summary: Through doping technology, researchers have successfully developed perovskite solar cells with a new device structure, increasing the resistivity of MAPbI(3) through Li+ doping, and then constructing heterostructural perovskite cells with a photoelectric conversion efficiency of 10.43%.

SOLAR ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Long-life lithium-sulfur batteries with high areal capacity based on coaxial CNTs@TiN-TiO2 sponge

Hui Zhang et al.

Summary: The rational design of TiN-TiO2 heterostructures on carbon nanotube sponge using atomic layer deposition resulted in stable Li-S batteries with high areal capacity and improved rate capability, showcasing enhanced electrochemical performance and capacity retention.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Tailored Electrolytes Enabling Practical Lithium-Sulfur Full Batteries via Interfacial Protection

Zeyu Shen et al.

Summary: The high electrode porosity required by the sulfur composite cathode presents challenges for the design of Li-S batteries, leading to constraints such as electrolyte quantity and energy density. By focusing on electrolyte engineering and conformal cathode-electrolyte interphases, researchers were able to improve the volumetric energy density and cyclability of Li-S batteries, achieving higher capacity and longer cycle life compared to conventional electrolytes.

ACS ENERGY LETTERS (2021)

Add to Collection

Review Chemistry, Physical

Challenges and key parameters in exploring the cyclability limitation of practical lithium-sulfur batteries

Zhilong Han et al.

Summary: We systematically summarize the cyclability of Li-S batteries with an areal capacity over 5 mA h cm(-2), focusing on high-sulfur-loading cathodes tested under low E/S ratio and N/P ratio circumstances, to identify key strategies for optimizing electrochemical performance.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Dual-Functional Conductive Framework Embedded with TiN-VN Heterostructures for Highly Efficient Polysulfide and Lithium Regulation toward Stable Li-S Full Batteries

Yu Yao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Hybrid Ni/NiO composite with N-doped activated carbon from waste cauliflower leaves: A sustainable bifunctional electrocatalyst for efficient water splitting

Van Chinh Hoang et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Optimized Catalytic WS2-WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium-Sulfur Batteries

Bin Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Intrinsic Defect-Rich Hierarchically Porous Carbon Architectures Enabling Enhanced Capture and Catalytic Conversion of Polysulfides

Lu Guan et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Physical

Graphene quantum dots as the nucleation sites and interfacial regulator to suppress lithium dendrites for high-loading lithium-sulfur battery

Yin Hu et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Dynamic Intelligent Cu Current Collectors for Ultrastable Lithium Metal Anodes

Jianyu Chen et al.

NANO LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

CO2-Oxidized Ti3C2Tx-MXenes Components for Lithium-Sulfur Batteries: Suppressing the Shuttle Phenomenon through Physical and Chemical Adsorption

Dong Kyu Lee et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Physical

Three-dimensionally ordered macro-microporous metal organic frameworks with strong sulfur immobilization and catalyzation for high-performance lithium-sulfur batteries

Guoliang Cui et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Stable Lithium Sulfur Battery Based on In Situ Electrocatalytically Formed Li2S on Metallic MoS2-Carbon Cloth Support

Mingshan Wang et al.

SMALL METHODS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Catalytic Conversion of Polysulfides Using Bimetallic Co7Fe3 for High-Performance Lithium-Sulfur Batteries

Pan Zeng et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Physical

3D CoSe@C Aerogel as a Host for Dendrite-Free Lithium-Metal Anode and Efficient Sulfur Cathode in Li-S Full Cells

Jiarui He et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon Microtube Textile with MoS2Nanosheets Grown on Both Outer and Inner Walls as Multifunctional Interlayer for Lithium-Sulfur Batteries

Jiaye Yang et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

0D/2D Co3O4/TiO2 Z-Scheme heterojunction for boosted photocatalytic degradation and mechanism investigation

Yuting Wang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of a V8C7-VO2 Bifunctional Scaffold as an Effective Polysulfide Immobilizer and Lithium Stabilizer for Li-S Batteries

Jingsheng Cai et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Kinetic Enhancement of Sulfur Cathodes by N-Doped Porous Graphitic Carbon with Bound VN Nanocrystals

Xinyue Yang et al.

SMALL (2020)

Add to Collection

Review Electrochemistry

Selenium or Tellurium as Eutectic Accelerators for High-Performance Lithium/Sodium-Sulfur Batteries

Shuping Li et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Add to Collection

Article Multidisciplinary Sciences

Ether-compatible sulfurized polyacrylonitrile cathode with excellent performance enabled by fast kinetics via selenium doping

Xin Chen et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Interfacial Stability of Hybrid-Electrolyte Lithium-Sulfur Batteries with a Layer of Multifunctional Polymer with Intrinsic Nanoporosity

Xingwen Yu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Highly stable lithium-sulfur batteries based on p-n heterojunctions embedded on hollow sheath carbon propelling polysulfides conversion

Han Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Fast electrochemical kinetics and strong polysulfide adsorption by a highly oriented MoS2 nanosheet@N-doped carbon interlayer for lithium-sulfur batteries

Jingyi Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Lithium phosphorus oxynitride as an efficient protective layer on lithium metal anodes for advanced lithium-sulfur batteries

Weiwen Wang et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

The Dual-Play of 3D Conductive Scaffold Embedded with Co, N Codoped Hollow Polyhedra toward High-Performance Li-S Full Cell

Wenlong Cai et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

General solution-processed formation of porous transition-metal oxides on exfoliated molybdenum disulfides for high-performance asymmetric supercapacitors

Kai Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Lewis Acid-Base Interactions between Polysulfides and Metal Organic Framework in Lithium Sulfur Batteries

Jianming Zheng et al.

NANO LETTERS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.