☆ 4.8 Article

Passivating Grain Boundaries via Graphene Additive for Efficient Kesterite Solar Cells

SMALL (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency

Jiazheng Zhou et al.

Summary: The phase evolution during selenization of CZTSSe is controlled to improve efficiency of solar cells. By applying positive pressure in the reaction chamber, the formation of secondary phases is prevented, resulting in high-crystallinity kesterite films. Solar cells with 13.8% certified efficiency are achieved. This work provides insights into the phase evolution and mechanism of kesterite absorbers.

NATURE ENERGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Suppressed Interface Defects by GeSe2 Post-Deposition Treatment Enables High-Efficiency Kesterite Solar Cells

Xin Zhang et al.

Summary: In this study, an effective strategy to improve the performance of CZTSSe solar cells is proposed by modifying the absorber layer with GeSe2 post-deposition treatment. The results show that this treatment can significantly reduce interfacial nonradiative carrier recombination and enhance the efficiency of the solar cells.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Applied

A feasible and effective solution-processed PCBM electron extraction layer enabling the high VOC and efficient Cu2ZnSn(S, Se)4 devices

Licheng Lou et al.

Summary: By introducing a PCBM layer as an electron extraction layer, the interfacial properties of CZTSSe/CdS/ZnO-ITO can be improved, leading to enhanced performance of CZTSSe solar cells.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Energy & Fuels

Rational Design of Heterojunction Interface for Cu2ZnSn(S,Se)4 Solar Cells to Exceed 12% Efficiency

Junjie Fu et al.

Summary: A unique indium-incorporation strategy was developed to optimize the heterojunction interface of Cu2ZnSn(S,Se)(4)/CdS solar cells, significantly improving the electrical properties and interface quality, resulting in an increased power conversion efficiency of up to 12.4%.

SOLAR RRL (2022)

Add to Collection

Article Energy & Fuels

Positive Role of Inhibiting CZTSSe Decomposition on Intrinsic Defects and Interface Recombination of 12.03% Efficient Kesterite Solar Cells

Bin Xu et al.

Summary: The method of inhibiting the decomposition of CZTSSe solar cells by providing Sn vapor is studied, and it is found that this method can significantly improve the performance of the cells. By inhibiting the decomposition, the interface defects are reduced and the recombination activation energy in the depletion region is improved.

SOLAR RRL (2022)

Add to Collection

Article Energy & Fuels

Unveiling microscopic carrier loss mechanisms in 12% efficient Cu2ZnSnSe4 solar cells

Jianjun Li et al.

Summary: Understanding carrier loss mechanisms at microscopic regions is essential for the development of high-performance thin-film solar cells. Researchers have unveiled the carrier loss mechanisms in CZTSe solar cells through comprehensive characterizations and device simulations. The results indicate that the grain boundary recombination velocity is the major limiting factor of CZTSe performance.

NATURE ENERGY (2022)

Add to Collection

Article Energy & Fuels

Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells

Yuancai Gong et al.

Summary: The efficiency of kesterite solar cells has been stuck at 12.6% since 2013 due to challenges in controlling defects. Now Gong et al. present a low-temperature annealing of the kesterite/CdS junction to form an epitaxial interface with a low defect density, enabling 13%-efficiency devices.

NATURE ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

N-Type Surface Design for p-Type CZTSSe Thin Film to Attain High Efficiency

Yali Sun et al.

Summary: By utilizing n-type Ag2ZnSnS4 to design the CZTSSe absorber for surface modification, Ag was found to play crucial roles in kesterite thin film devices, leading to improved performance of the solar cell with an efficiency of up to 12.55% and reducing the open-circuit voltage deficit to 0.306 V.

ADVANCED MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

A Facile Process for Partial Ag Substitution in Kesterite Cu2ZnSn(S,Se)(4) Solar Cells Enabling a Device Efficiency of over 12%

Myeng Gil Gang et al.

Summary: Introducing a thin Ag layer on a metallic precursor in kesterite solar cells effectively improves device characteristics and performance in ACZTSSe solar cells, reducing the Voc-deficit and enhancing efficiency.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Applied

Adjusting the SnZn defects in Cu2ZnSn(S,Se)4 absorber layer via Ge4+ implanting for efficient kesterite solar cells

Yueqing Deng et al.

Summary: This study investigates the suppression of Sn-Zn deep traps in the CZTSSe absorber layer through Ge incorporation, leading to a significant decrease in energy levels and concentration of Sn-Zn defects, and promoting grain growth to improve the efficiency of CZTSSe solar cells.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Systematic Efficiency Improvement for Cu2ZnSn(S,Se)4 Solar Cells By Double Cation Incorporation with Cd and Ge

Mingrui He et al.

Summary: In this study, the performance of kesterite CZTSSe solar cell was significantly improved by incorporating small amounts of Ge and Cd into the absorber, reducing nonradiative recombination and enhancing carrier collection efficiency. The combination of Ge and Cd incorporation led to higher open-circuit voltage, short-circuit current density, and fill factor, resulting in a high conversion efficiency of 11.6%. This research highlights the importance of multiple cation incorporation strategy for systematically manipulating the opto-electronic properties of kesterite materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Identifying the origin of the Voc deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn2+ and Sn4+ precursors in DMSO solution

Yuancai Gong et al.

Summary: By investigating the grain growth mechanism of Cu2ZnSn(S,Se)(4) solar cells, this study reveals that the large voltage deficit issue limiting kesterite solar cell efficiency mainly originates from surface deep defects, and high efficiency (>12%) and low V-oc deficit (<300 mV) of Sn4+ processed CZTSSe solar cells highlight a new strategy for fabricating high quality kesterite absorbers.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene/Strontium Titanate: Approaching Single Crystal-Like Charge Transport in Polycrystalline Oxide Perovskite Nanocomposites through Grain Boundary Engineering

Yue Lin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Interconnection between Trait, Structure, and Composition of Grain Boundaries in Cu(In,Ga)Se2 Thin-Film Solar Cells

Mohit Raghuwanshi et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Impact of Na Doping on the Carrier Transport Path in Polycrystalline Flexible Cu2ZnSn(S,Se)4Solar Cells

Woo-Lim Jeong et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Defect Control for 12.5% Efficiency Cu2ZnSnSe4 Kesterite Thin-Film Solar Cells by Engineering of Local Chemical Environment

Jianjun Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Progress and prospects of CZTSSe/CdS interface engineering to combat high open-circuit voltage deficit of kesterite photovoltaics: a critical review

Nisika et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Applied

Lithium-assisted synergistic engineering of charge transport both in GBs and GI for Ag-substituted Cu2ZnSn(S,Se)4 solar cells

Xiangyun Zhao et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Improving Carrier-Transport Properties of CZTS by Mg Incorporation with Spray Pyrolysis

Stener Lie et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Strong Interplay between Sodium and Oxygen in Kesterite Absorbers: Complex Formation, Incorporation, and Tailoring Depth Distributions

Sigbjorn Grini et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Energy & Fuels

Cd-Free Cu(In,Ga)(Se,S)2 Thin-Film Solar Cell With Record Efficiency of 23.35%

Motoshi Nakamura et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

Add to Collection

Article Chemistry, Physical

Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device

Dae-Ho Son et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Solar Cells: Passivated Perovskite Crystallization via g -C3 N4 for High-Performance Solar Cells (Adv. Funct. Mater. 7/2018)

Lu-Lu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

The Role of Hydrogen from ALD-Al2O3 in Kesterite Cu2ZnSnS4 Solar Cells: Grain Surface Passivation

Jongsung Park et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Sodium Passivation of the Grain Boundaries in CuInSe2 and Cu2ZnSnS4 for High-Efficiency Solar Cells

Cheng-Yan Liu et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells

Ya-Fang Qi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Revealing the Role of Potassium Treatment in CZTSSe Thin Film Solar Cells

Wenjie Li et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Influencing Mechanism of the Selenization Temperature and Time on the Power Conversion Efficiency of Cu2ZnSn(S,Se)4-Based Solar Cells

Zhen-Yu Xiao et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing Efficiency of Perovskite Solar Cells via N-doped Graphene: Crystal Modification and Surface Passivation

Mahboubeh Hadadian et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Energy & Fuels

Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates

Kaiwen Sun et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Add to Collection

Article Optics

Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries

Ying Zhou et al.

NATURE PHOTONICS (2015)

Add to Collection

Article Chemistry, Physical

Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)(4) and increases photovoltaic efficiency

H. Xin et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Add to Collection

Article Chemistry, Physical

Impact of Nanoscale Elemental Distribution in High-Performance Kesterite Solar Cells

Kasra Sardashti et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

The Role of Sodium as a Surfactant and Suppressor of Non-Radiative Recombination at Internal Surfaces in Cu2ZnSnS4

Talia Gershon et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Temperature Processed Electron Collection Layers of Graphene/TiO2 Nanocomposites in Thin Film Perovskite Solar Cells

Jacob Tse-Wei Wang et al.

NANO LETTERS (2014)

Add to Collection

Article Chemistry, Physical

Engineering Grain Boundaries in Cu2ZnSnSe4 for Better Cell Performance: A First-Principle Study

Wan-Jian Yin et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency

Wei Wang et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Structure and Electronic Properties of Grain Boundaries in Earth-Abundant Photovoltaic Absorber Cu2ZnSnSe4

Junwen Li et al.

ACS NANO (2011)

Add to Collection

Article Chemistry, Physical

Fullerene-Grafted Graphene for Efficient Bulk Heterojunction Polymer Photovoltaic Devices

Dingshan Yu et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Micrometer-Scale Ballistic Transport in Encapsulated Graphene at Room Temperature

Alexander S. Mayorov et al.

NANO LETTERS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Graphene Bridges Enhanced Photoinduced Charge Transport in Dye-Sensitized Solar Cells

Nailiang Yang et al.

ACS NANO (2010)

Add to Collection

Article Energy & Fuels

The electronic structure of chalcopyrites-bands, point defects and grain boundaries

Susanne Siebentritt et al.

PROGRESS IN PHOTOVOLTAICS (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Organic Photovoltaic Devices Based on a Novel Acceptor Material: Graphene

Zunfeng Liu et al.

ADVANCED MATERIALS (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Superior thermal conductivity of single-layer graphene

Alexander A. Balandin et al.

NANO LETTERS (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.