☆ 4.7 Article

Node-reinforced hollow-strut metal lattice materials for higher strength

SCRIPTA MATERIALIA (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Controlled mechanical and mass-transport properties of porous scaffolds through hollow strut

Xing Peng et al.

Summary: The rational design of bone implants is complex due to the unique combination of mechanical, mass-transport, and biological properties required for optimal performance. Conventional scaffold structures often couple important properties, making it difficult to enhance stiffness and mass-transport simultaneously. This study introduces an inner pore within the strut to achieve controlled mechanical and mass-transport properties, decoupling permeability and mechanical property to a good extent.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Materials Science, Multidisciplinary

An Experimental and Computational Modeling Study on Additively Manufactured Micro-Architectured Ti-24Nb-4Zr-8Sn Hollow-Strut Lattice Structures

Sudipta Pramanik et al.

Summary: This study focuses on the design, manufacturing, and mechanical testing of hollow-strut lattice structures of Ti-24Nb-4Zr-8Sn alloy. The microstructure of the hollow lattices consists of a''-martensite phase within the beta phase. The face-centered cubic hollow lattice structure exhibits higher tensile strength but lower load-bearing capability compared to the body-centered cubic hollow lattice structure.

ADVANCED ENGINEERING MATERIALS (2023)

Add to Collection

Review Materials Science, Multidisciplinary

The Gibson-Ashby model for additively manufactured metal lattice materials: Its theoretical basis, limitations and new insights from remedies

Haozhang Zhong et al.

Summary: The Gibson-Ashby (G-A) model is essential for designing additively manufactured metal lattice materials. However, it is only applicable to low-density lattice materials with strut length-to-diameter ratios greater than 5. This study reveals fundamental disconnections between the G-A model and additively manufactured metal lattice materials.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Understanding the superior mechanical properties of hollow-strut metal lattice materials

H. Z. Zhong et al.

Summary: Intricate hollow-strut metal lattice materials, enabled by additive manufacturing, exhibit superior strength and stiffness compared to their solid-strut counterparts of the same density. Analyzed using various models, it is revealed that the hollow-strut lattice structures provide higher resistance to bending, resulting in increased mechanical properties. These materials offer lightweight design options with improved performance at the same or lower density than solid-strut metal lattices.

SCRIPTA MATERIALIA (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Geometrical parameters and mechanical properties of Ti6Al4V hollow-walled lattices

J. Noronha et al.

Summary: This study evaluates the feasibility of a single-step additive manufacturing method for fabricating hollow-walled lattices, aiming to achieve greater geometric control and reduce time and cost. The manufacturability of laser powder bed fusion method is explored with different parameters, and the mechanical properties of the hollow-walled lattices are tested. The results will contribute to further comparison between hollow-walled and dense-walled lattices, and provide guidance for future manufacturing technologies.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Lijun Xiao et al.

Summary: Inspired by natural hollow structures, hollow lattice structures were designed and fabricated using 316L stainless steel through selective laser melting process. Experimental and numerical simulations demonstrated that the hollow beam cross-sections contributed to the stable crushing response of the lattice structures, with smooth post-yield behavior. The specific strength and energy absorption of the hollow lattice structures were found to be superior to many solid-strut lattice materials.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Additive manufacturing of Ti-6Al-4V horizontal hollow struts with submillimetre wall thickness by laser powder bed fusion

J. Noronha et al.

Summary: This study establishes a robust LPBF additive manufacturability range for Ti-6Al-4V hollow struts by examining different parameters. Three laser scan strategies were explored and compared to achieve successful fabrication. The manufacturability of horizontal struts was evaluated by comparing them with solid struts and vertical hollow struts.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Hollow-walled lattice materials by additive manufacturing: Design, manufacture, properties, applications and challenges

J. Noronha et al.

Summary: The study explores the potential applications of hollow-walled lattice structures in materials engineering, addressing the lack of comprehensive analysis on these structures. It highlights the unique performance of hollow-walled lattice structures, distinct from dense-walled lattice structures, providing more possibilities for architecture design at the micro to nanoscale levels.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Manufacturability of Ti-Al-4V Hollow-Walled Lattice Struts by Laser Powder Bed Fusion

J. Noronha et al.

Summary: Hollow-walled lattices have lower densities than conventional dense-walled lattices. This study investigates the LPBF manufacturability of Ti-6Al-4V hollow-walled struts with respect to various parameters, and provides guidance for the future manufacture of these lattices. The average inconsistency between designed and manufactured outer diameters was found to be substantially lower than achievable by conventional manufacturing.

JOM (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Structural Design and Dynamic Compressive Properties of Ti-6Al-4V Hollow Lattice Structures

Haiting Shen et al.

Summary: The study found that strengthening structures can improve structural weaknesses inside the basic structure, leading to excellent mechanical properties in specimen SW, while the strengthening structures in specimen SJ have limited effects. The strain rate sensitivity is dominated by the strain rate effect of the Ti-6Al-4V material.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Mechanics

Elastic response of hollow truss lattice micro-architectures

Seth Watts

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Engineering, Biomedical

Mechanical properties tailoring of topology optimized and selective laser melting fabricated Ti6Al4V lattice structure

Yangli Xu et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Compressive properties and micro-structural characteristics of Ti-6Al-4V fabricated by electron beam melting and selective laser melting

Lijun Xiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

SLM lattice structures: Properties, performance, applications and challenges

Tobias Maconachie et al.

MATERIALS & DESIGN (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges

X. Z. Zhang et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Mechanical

Mechanical properties of an improved 3D-printed rhombic dodecahedron stainless steel lattice structure of variable cross section

Xiaofei Cao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of topology-optimized lattice structures manufactured via selective laser melting

Zefeng Xiao et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Multidisciplinary Sciences

Strong, lightweight, and recoverable three-dimensional ceramic nanolattices

Lucas R. Meza et al.

SCIENCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Compressive strength of hollow microlattices: Experimental characterization, modeling, and optimal design

Lorenzo Valdevit et al.

JOURNAL OF MATERIALS RESEARCH (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of nickel-based microlattice materials with structural hierarchy from the nanometer to the millimeter scale

A. Torrents et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Multidisciplinary Sciences

Ultralight Metallic Microlattices

T. A. Schaedler et al.

SCIENCE (2011)

Add to Collection

Article Multidisciplinary Sciences

The properties of foams and lattices

MF Ashby

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Cellular metal lattices with hollow trusses

DT Queheillalt et al.

ACTA MATERIALIA (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.