☆ 4.5 Review

A survey on the mechanical design for piezo-actuated compliant micro-positioning stages

REVIEW OF SCIENTIFIC INSTRUMENTS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Design of compliant mechanisms based on compliant building elements. Part I: Principles

Chenglin Li et al.

Summary: This paper presents a new design method called Compliant Building Elements (CBE) for generating practical flexure designs in compliant mechanisms. The CBE encodes quantitative information of a compliant system in a parametric matrix and uses the screw theory to guide the design and synthesis process. The synthesis procedure is a top-down and iterative process, starting from stage layout to optimizing the compliant connection elements and types.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2023)

Add to Collection

Article Automation & Control Systems

Design and optimization of a new large stroke micropositioner based on cricket-mimicked bistable mechanism for potential application in polishing

Ngoc Thoai Tran et al.

Summary: This article proposes an optimal design of a new micropositioner based on the cricket-mimicked bistable mechanism to overcome the limited stroke of existing stages. The proposed design achieves a large stroke with centimeter range through the combination of bistable mechanism and positive-stiffness mechanism. A hybrid optimization approach is used to solve the objective functions and constraints, combining fuzzy logic, teaching learning-based optimization (TLBO), and artificial neural network (ANN). The influences of geometrical parameters on the micropositioner performance qualities are also investigated. The experimental results demonstrate the feasibility and reliability of the TLBO-assisted ANN optimization, with a potential application in various fields due to the achieved large output stroke.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

Add to Collection

Article Engineering, Multidisciplinary

Design of compliant mechanisms based on compliant building elements. Part II: Practice

Chenglin Li et al.

Summary: In Part II, the Compliant Building Elements (CBE) method is introduced for generating practical designs of multiple degree-of-freedom (DOF) compliant mechanisms. A library of compliant mechanisms is created based on the combination of prismatic beams, containing commonly used basic elements (BEs), serial elements (SEs), and parallel elements (PEs). Through examples, the design processes of a six-axis nanopositioner, a compliant steering mechanism, and a one-dimensional mechanical metamaterial structure are demonstrated using the library and CBE method. Each design yields a flexure topology that meets requirements and corresponding stiffness and compliance matrices for kinematic characteristics and stiffness optimization in selected axes.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Integratable micro-optical compound objective lens using soft lithography

Mohammad Hafttananian et al.

Summary: This study presents a novel method for fabricating complex free-form microlenses and miniature microscope objectives that can be seamlessly integrated into microsystems and photonic devices. The method combines 3D printed molds, using direct laser writing two-photon polymerization, and soft lithography techniques, demonstrating exceptional design flexibility and excellent optical performance of the lenses. The ability to combine multiple lenses to produce complex micro-optical imaging objectives further highlights the potential of this technology for the rapid and cost-effective fabrication of sophisticated micro-optical components.

SENSORS AND ACTUATORS A-PHYSICAL (2023)

Add to Collection

Article Acoustics

Modular quasi-zero-stiffness isolator based on compliant constant-force mechanisms for low-frequency vibration isolation

Bingxiao Ding et al.

Summary: In this paper, a rigid-flexible coupling quasi-zero-stiffness (QZS) vibration isolator with high-static-low-dynamic stiffness (HSLDS) characteristics is proposed. The QZS isolator is achieved by combining a compliant constant-force mechanism of diamond-shape mechanism and a nonlinear bi-stable beam in parallel. Analytical models and finite element analysis are used to evaluate the isolator's performance and identify optimal design parameters. The results show that the QZS isolator effectively isolates low-frequency vibrations.

JOURNAL OF VIBRATION AND CONTROL (2023)

Add to Collection

Review Engineering, Mechanical

Design of a precise positioning stage actuated by a double-layer stick-slip actuator used for precise assembly

Beichao Shi et al.

Summary: A novel friction-actuated precise positioning stage for precise assembly is proposed, which adopts a double-layer structure in the flexible mechanism. The actuating part is decoupled from the clamping force adjusting part to facilitate clamping force adjustment. This structure improves the load capacity and reduces fallback motion. Additionally, a coarse-fine switching motion mode based on the double-layer cooperative driving principle is proposed. The performance of the positioning stage is evaluated through characteristic tests and precise assembly experiments, demonstrating precise position error adjustment.

MECHANISM AND MACHINE THEORY (2023)

Add to Collection

Article Engineering, Mechanical

Design and analysis of new ultra compact decoupled XYZO stage to achieve large-scale high precision motion

Xigang Chen et al.

Summary: The new high precision ultra-compact decoupled XYZO motion stage designed with flexure hinges consists of three components: serial-parallel dual-stage amplifier, Z-shape motion steering mechanism, and motion decoupled mechanism. It offers advantages such as compact structure, large output decoupling motion, and XYZO four axes output displacement. The stage's kinetostatic analysis, finite-element analysis (FEA), and prototype experiments verify the design objectives.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Engineering, Mechanical

Design and modeling of a compact compliant stroke amplification mechanism with completely distributed compliance for ground-mounted actuators

Haiyang Li et al.

Summary: This study introduces a new compliant mechanism for stroke amplification of piezoelectric actuators, which offers advantages of lightweight, reduced stress concentration, large motion range, and ease of manufacture. Optimization of the kinetostatic models enables significant increase in amplification ratio, making it a versatile option for various compliant mechanism designs.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Engineering, Mechanical

Generalized Model and Configuration Design of Multiple-Axis Flexure Hinges

Lijian Li et al.

Summary: This paper presents two generalized models that can quickly formulate the closed-form equations of compliance and precision for multiple-axis flexure hinges. It introduces new types of multiple-axis flexure hinges and verifies the models using finite element results and existing equations. The designed hinges improve the integrated performances of spatial compliant mechanisms.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Multidisciplinary Sciences

Sequential metamaterials with alternating Poisson's ratios

Amin Farzaneh et al.

Summary: This study introduces periodic and graded metamaterials that passively achieve sequential deformations with user-specified alternating Poisson's ratios. An analytical approach and software tool are provided for designing these materials in two- and three-dimensions. Experiments validate the accuracy of the design in producing alternating Poisson's ratios.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Mechanical

Enhancing Dynamic Bandwidth of Amplified Piezoelectric Actuators by a Hybrid Lever and Bridge-Type Compliant Mechanism

Mingxiang Ling et al.

Summary: This paper reports a new type of fast amplified piezoelectric actuator (APA) with enhanced resonance frequency based on a hybrid compliant amplifying mechanism. By synthesizing lever-type and semi bridge-type compliant mechanisms, a two-stage displacement flexure amplifier is proposed, achieving a good tradeoff between displacement amplification ratio and dynamic bandwidth. Experimental evaluation shows that this APA has high resonance frequency, displacement amplification ratio, and response speed, with a compact size. Additionally, a comprehensive two-port dynamic stiffness model is developed to predict the static and dynamic behaviors of the compliant amplifier.

ACTUATORS (2022)

Add to Collection

Article Engineering, Mechanical

A constraint-flow based method of synthesizing XY? compliant parallel mechanisms with decoupled motion and actuation characteristics

Haiyang Li et al.

Summary: This paper presents a constraint-flow based method for synthesizing XY theta compliant parallel mechanisms (CPMs) with decoupled motion and actuation characteristics. The method derives multiple constraint combinations for the compliant modules, resulting in a large number of possible synthesis schemes. Case studies demonstrate the effectiveness of the proposed method.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Multidisciplinary Sciences

Three-dimensional nanofabrication via ultrafast laser patterning and kinetically regulated material assembly

Fei Han et al.

Summary: A major challenge in nanotechnology is the fabrication of complex 3D structures with desired materials. This study presents a strategy using a library of materials to fabricate arbitrary 3D nanostructures. By using hydrogel templates and fine-tuning exposure strategies, high-resolution 2D and 3D structures are achieved. Fabricated nanodevices demonstrate their designed functionality and precision, offering further possibilities for nanodevice design.

SCIENCE (2022)

Add to Collection

Article Engineering, Multidisciplinary

Analytical modelling and experiments for hybrid multiaxis flexure hinges

Huaxian Wei et al.

Summary: Hybrid multiaxis flexure hinges with a generalized elliptical-arc hybrid fillet (EAHF) notch contour were developed and investigated in this study. Analytical equations for compliance, rotational precision, and maximum stress under combined loads were formulated and verified through finite element analysis and experiments. A parameter study on the effects of the hybrid filleted notch revealed that the rotation center and shearing compliance of the hinges changed while the rotational compliance remained largely unaffected. The presented EAHF contour provides a generalized model for designing hybrid multiaxis flexure hinges, and the developed analytical equations are sufficient for quick and systematic evaluation of hinge performance.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

Add to Collection

Review Engineering, Mechanical

A survey on synthesis of compliant constant force/torque mechanisms?

Jie Ling et al.

Summary: A comprehensive survey on the synthesis methods of compliant constant force mechanisms was conducted, categorizing three main approaches and providing detailed introductions to modeling and optimization methods for each approach. This survey offers overall perspectives on current status and future challenges in the field for designers and researchers.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication of high precision grating patterns with a compliant nanomanipulator-based femtosecond laser direct writing system

Mengjia Cui et al.

Summary: This paper proposes a cost-effective LDW system with a self-developed compliant nanomanipulator, and validates its accuracy through the fabrication of optical grating patterns. The results show that the proposed system achieves comparable performances with much lower costs compared to existing commercial laser direct writing systems.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

Add to Collection

Article Engineering, Multidisciplinary

Optimized design of a compact multi-stage displacement amplification mechanism with enhanced efficiency

Mingxiang Ling et al.

Summary: This paper proposes a novel hybrid three-stage compliant displacement amplifier with a compact structure for mechanically amplifying micro-stroke of actuators. It introduces a new index to measure the displacement amplification efficiency and derives a dynamic stiffness model for design optimization. Experimental tests of two prototypes demonstrate the high displacement amplification efficiency of the current design.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Design, Assembly, and Simulation of Flexure-Based Modular Micro-Positioning Stages

Shufan Liao et al.

Summary: This paper introduces modular MPSs using designed standardized modules to address the performance and cost issues of flexure-based MPSs, as well as to accommodate complex spatial configurations. Case studies on static and dynamic performances of modular MPSs with different modules and materials are presented, validating their better flexibility and functionality for further applications.

MACHINES (2022)

Add to Collection

Article Engineering, Multidisciplinary

A lever-bridge combined compliant mechanism for translation amplification

Xing Shen et al.

Summary: The lever-type mechanism is commonly used in precision engineering, but faces issues such as overstress and distortion of amplification ratios. This paper presents a novel combined compliant mechanism that optimizes design to achieve a large amplification ratio while keeping stress within acceptable limits.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Closed-form compliance equations for elliptic-revolute notch type multiple-axis flexure hinges

Huaxian Wei et al.

Summary: This paper presents closed-form compliance equations for elliptic-revolute notch type multiple-axis flexure hinges undergoing small displacement in three-dimensional applications. Analytical compliance equations in six degrees of freedom are derived based on beam theory, with comparisons to existing compliance equations for revolute flexure hinges. Finite element analyses and numerical simulations verify the developed equations, establishing simplified coefficients between compliances of elliptic and circular-revolute flexure hinges. The presented compliance equations are helpful for designing spatial compliant mechanisms using elliptic-revolute flexure hinges.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Chemistry, Analytical

3D-Printed Micro-Tweezers with a Compliant Mechanism Designed Using Topology Optimization

Yukihito Moritoki et al.

Summary: This study presents the development of micro-tweezers using topology optimization and microstereolithography, demonstrating its capability to manipulate organoids with a diameter of approximately 360 μm. The results indicate that the deformation of the topology-optimized micro-tweezers is proportional to the applied load, suggesting the potential for enhancing tools for handling various biological samples.

MICROMACHINES (2021)

Add to Collection

Article Automation & Control Systems

Design of a spatial constant-force end-effector for polishing/deburring operations

Bingxiao Ding et al.

Summary: A novel constant force mechanism (CFM) based on positive and negative stiffness mechanisms is proposed for controlling contact force on workpieces during industrial deburring operations. The CFM can generate a constant force travel range without additional sensors or control algorithms. The design concepts, analytical model, FEA simulation, and experimental studies demonstrate the effectiveness of the proposed CFM for industrial applications.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Analytical

A Systematic Review of Piezoelectric Materials and Energy Harvesters for Industrial Applications

Abdul Aabid et al.

Summary: In the past three decades, smart materials, particularly piezoelectric materials, have gained popularity for their energy conversion properties. This review article focuses on piezoelectric energy harvesters (PEH's) and provides a detailed study, along with discussions on the challenges and potential applications in renewable energy.

SENSORS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

FEA-based optimization and experimental verification of a typical flexure-based constant force module

Bingxiao Ding et al.

Summary: This paper proposes an optimization method for solving the problem of insufficient constant-force stroke of the compliant constant force mechanism, designing a flexure-based constant force module and obtaining the optimal solution set of architecture parameters through experimental studies and parametric evaluation. The optimized constant force stroke and constant force of the mechanism are verified through experimental validation, demonstrating the effectiveness and feasibility of the proposed FEA-based optimization method.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection

Article Engineering, Manufacturing

Design of Large-Stroke and High-Resolution Drive System Based on Giant Magnetostrictive Material

Tian Xie et al.

Summary: The novel macro-micro linear actuator based on giant magnetostrictive material achieves high precision and large-stroke by using a permanent magnet drive coil structure and Lorentz force principle. It combines macro-motion displacement with micro-motion control, with the advantage of simple structure and easy installation in precision manufacturing applications.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2021)

Add to Collection

Review Mechanics

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

Mingxiang Ling et al.

APPLIED MECHANICS REVIEWS (2020)

Add to Collection

Review Engineering, Mechanical

Design of compliant mechanisms using continuum topology optimization: A review

Benliang Zhu et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Engineering, Mechanical

The performance comparison of typical notched flexure hinges

Wei Ma et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Chemistry, Analytical

Design of a Compliant Mechanism Based Four-Stage Amplification Piezoelectric-Driven Asymmetric Microgripper

Xiaodong Chen et al.

MICROMACHINES (2020)

Add to Collection

Article Automation & Control Systems

Development and control of a large range XY⊖ micropositioning stage

Ammar Al-Jodah et al.

MECHATRONICS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in Hybrid Fabrication toward Hierarchical Tissue Constructs

Paul D. Dalton et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Design of flexure-based modular architecture micro-positioning stage

Bingxiao Ding et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2020)

Add to Collection

Article Robotics

Optimal Design of a Compliant Constant-Force Mechanism to Deliver a Nearly Constant Output Force Over a Range of Input Displacements

Chih-Hsing Liu et al.

SOFT ROBOTICS (2020)

Add to Collection

Article Mathematics

Experimental Validation of a Sliding Mode Control for a Stewart Platform Used in Aerospace Inspection Applications

Javier Velasco et al.

MATHEMATICS (2020)

Add to Collection

Article Education, Scientific Disciplines

Generalized model for conic-V-shaped flexure hinges

Jianyi Kong et al.

SCIENCE PROGRESS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Design of a precision multi-layer roll-to-roll printing system

Chenglin Li et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)

Add to Collection

Article Engineering, Manufacturing

Analytical Compliance Model for Right Circle Flexure Hinge Considering the Stress Concentration Effect

Tuo Weixiao et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2020)

Add to Collection

Article Engineering, Mechanical

A bistable mechanism with linear negative stiffness and large in-plane lateral stillness: design, modeling and case studies

Zhanfeng Zhou et al.

MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Mechanical

A general two-port dynamic stiffness model and static/dynamic comparison for three bridge-type flexure displacement amplifiers

Mingxiang Ling

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Development and control methodologies for 2-DOF micro/nano positioning stage with high out-of-plane payload capacity

Kunhai Cai et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)

Add to Collection

Article Engineering, Manufacturing

Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control

Daehoon Han et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Article Physics, Applied

A stick-slip/inchworm hybrid rotary piezo motor based on a symmetric triangular driving mechanism

Yangkun Zhang et al.

APPLIED PHYSICS LETTERS (2019)

Add to Collection

Article Chemistry, Analytical

Design, Modeling, and Testing of a Novel XY Piezo-Actuated Compliant Micro-Positioning Stage

Quan Zhang et al.

MICROMACHINES (2019)

Add to Collection

Article Engineering, Mechanical

Exploration of Translational Joint Design Using Corrugated Flexure Units With Bezier Curve Segments

Nianfeng Wang et al.

JOURNAL OF MECHANICAL DESIGN (2019)

Add to Collection

Article Engineering, Mechanical

Design, modeling, and analysis of hybrid flexure hinges

Lijian Li et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Experimental Hysteresis Identification and Micro-position Control of a Shape-Memory-Alloy Rod Actuator

S. A. Mir Mohammad Sadeghi et al.

INTERNATIONAL JOURNAL OF ENGINEERING (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Compact compliant parallel XY nano-positioning stage with high dynamic performance, small crosstalk, and small yaw motion

Hak-Jun Lee et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

A eutectic-alloy-infused soft actuator with sensing, tunable degrees of freedom, and stiffness properties

Yufei Hao et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2018)

Add to Collection

Article Engineering, Mechanical

Topology optimisation of bridge input structures with maximal amplification for design of flexure mechanisms

Leon Clark et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Mechanical

Kinetostatic modeling of complex compliant mechanisms with serial-parallel substructures: A semi-analytical matrix displacement method

Mingxiang Ling et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Mechanical

Optimization of a 2-DOF micro-positioning stage using corrugated flexure units

Nianfeng Wang et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Mechanical

A new pseudo-rigid-body model approach for modeling the quasi-static response of planar flexure-hinge mechanisms

Slavisa Salinic et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Mechanical

Topology optimization of efficient and strong hybrid compliant mechanisms using a mixed mesh of beams and flexure hinges with strength control

Lin Cao et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Mechanical

Modeling and analysis of conical-shaped notch flexure hinges based on NURBS

Jianwei Wu et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Design and characterization of a two-axis, flexure-based nanopositioning stage with 50 mm travel and reduced higher order modes

Nilabh K. Roy et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Cylindrical cross-axis flexural pivots

Jason Dearden et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

Add to Collection

Article Instruments & Instrumentation

Modeling and design of a two-axis elliptical notch flexure hinge

Jianwei Wu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Kinematic characteristic analysis of a micro-/nano positioning stage based on bridge-type amplifier

Chao Lin et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Dynamic modeling and analysis of stack giant magnetostrictive actuator

Ce Rong et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection

Article Multidisciplinary Sciences

Compliant rolling-contact architected materials for shape reconfigurability

Lucas A. Shaw et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Analytical

Fabrication, Experiments, and Analysis of an LBM Additive-Manufactured Flexure Parallel Mechanism

Huaxian Wei et al.

MICROMACHINES (2018)

Add to Collection

Review Engineering, Mechanical

Survey on Recent Designs of Compliant Micro-/Nano-Positioning Stages

Zeyi Wu et al.

ACTUATORS (2018)

Add to Collection

Article Engineering, Mechanical

Design and optimization of full decoupled micro/nano-positioning stage based on mathematical calculation

Zhigang Wu et al.

MECHANICAL SCIENCES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Design and analysis of a flexure-based modular precision positioning stage with two different materials

Bingxiao Ding et al.

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Development of a novel large stroke 2-DOF micromanipulator for micro/nano manipulation

Xiao Xiao et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Design and control of a novel piezo-driven XY parallel nanopositioning stage

Xiaozhi Zhang et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2017)

Add to Collection

Article Automation & Control Systems

A Rapid Vibration Reduction Method for Macro-Micro Composite Precision Positioning Stage

Lanyu Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Add to Collection

Article Engineering, Mechanical

A Comprehensive Survey on Microgrippers Design: Mechanical Structure

Matteo Verotti et al.

JOURNAL OF MECHANICAL DESIGN (2017)

Add to Collection

Article Engineering, Mechanical

Modular kinematics and statics modeling for precision positioning stage

Mingxiang Ling et al.

MECHANISM AND MACHINE THEORY (2017)

Add to Collection

Article Chemistry, Analytical

Two-Dimensional Micro-/Nanoradian Angle Generator with High Resolution and Repeatability Based on Piezo-Driven Double-Axis Flexure Hinge and Three Capacitive Sensors

Xinran Tan et al.

SENSORS (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Research on a novel non-resonant piezoelectric linear motor with lever amplification mechanism

Mengxin Sun et al.

SENSORS AND ACTUATORS A-PHYSICAL (2017)

Add to Collection

Article Multidisciplinary Sciences

In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction

C. Kenel et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

3D-printing of materials with anisotropic heat distribution using conductive polylactic acid composites

Yuan Zhuang et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Engineering, Mechanical

A modified pseudo-rigid-body modeling approach for compliant mechanisms with fixed-guided beam flexures

Pengbo Liu et al.

MECHANICAL SCIENCES (2017)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Fabrication Methods of Compliant Mechanisms

Daniel Lates et al.

10TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2016 (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Origami Metamaterials for Tunable Thermal Expansion

Elisa Boatti et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Engineering, Mechanical

Design and analysis of a 3-DOF planar micromanipulation stage with large rotational displacement for micromanipulation system

Bingxiao Ding et al.

MECHANICAL SCIENCES (2017)

Add to Collection

Article Engineering, Mechanical

Modeling Large Planar Deflections of Flexible Beams in Compliant Mechanisms Using Chained Beam-Constraint-Model

Fulei Ma et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Multistable Shape-Reconfigurable Architected Materials

Babak Haghpanah et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical behavior of additive manufactured, powder-bed laser-fused materials

Todd M. Mower et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Engineering, Mechanical

Singularity analysis of a planar robotic manipulator: Application to an XY-Theta platform

Anas Hijazi et al.

MECHANISM AND MACHINE THEORY (2016)

Add to Collection

Article Engineering, Mechanical

Design and analysis of a new compliant XY micropositioning stage based on Roberts mechanism

Sicong Wan et al.

MECHANISM AND MACHINE THEORY (2016)

Add to Collection

Article Engineering, Mechanical

Design and analysis of a compact flexure-based precision pure rotation stage without actuator redundancy

Leon Clark et al.

MECHANISM AND MACHINE THEORY (2016)

Add to Collection

Article Automation & Control Systems

Design, development and analysis of a haptic-enabled modular flexure-based manipulator

Joshua Pinskier et al.

MECHATRONICS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Design and nonlinear analysis of a 6-DOF compliant parallel manipulator with spatial beam flexure hinges

Wang Dan et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

Add to Collection

Article Engineering, Multidisciplinary

Design and control of a cascaded piezoelectric actuated two-degrees-of-freedom positioning compliant stage

Jer-Wei Lee et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

Add to Collection

Article Engineering, Multidisciplinary

Replication of skilled polishing technique with serial-parallel mechanism polishing machine

Yuta Oba et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

Add to Collection

Article Instruments & Instrumentation

A one-piece 3D printed flexure translation stage for open-source microscopy

James P. Sharkey et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2016)

Add to Collection

Article Instruments & Instrumentation

A novel piezoelectrically actuated 2-DoF compliant micro/nano-positioning stage with multi-level amplification

Wu-Le Zhu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2016)

Add to Collection

Article Chemistry, Analytical

Development of a Microforce Sensor and Its Array Platform for Robotic Cell Microinjection Force Measurement

Yu Xie et al.

SENSORS (2016)

Add to Collection

Article Instruments & Instrumentation

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Wu-Le Zhu et al.

SMART MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Instruments & Instrumentation

Design and fabrication of a novel XYθz monolithic micro-positioning stage driven by NiTi shape-memory-alloy actuators

Alaa AbuZaiter et al.

SMART MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Instruments & Instrumentation

Enhanced mathematical modeling of the displacement amplification ratio for piezoelectric compliant mechanisms

Mingxiang Ling et al.

SMART MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Chemistry, Analytical

A Robot-Assisted Cell Manipulation System with an Adaptive Visual Servoing Method

Yu Xie et al.

MICROMACHINES (2016)

Add to Collection

Article Chemistry, Physical

Fabrication of large Ti-6Al-4V structures by direct laser deposition

Chunlei Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Engineering, Mechanical

Analysis of the displacement amplification ratio of bridge-type mechanism

Ke-qi Qi et al.

MECHANISM AND MACHINE THEORY (2015)

Add to Collection

Article Engineering, Multidisciplinary

Integrating mechanism synthesis and topological optimization technique for stiffness-oriented design of a three degrees-of-freedom flexure-based parallel mechanism

Guo Zhan Lum et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)

Add to Collection

Article Instruments & Instrumentation

Compliance and control characteristics of an additive manufactured-flexure stage

ChaBum Lee et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2015)

Add to Collection

Article Instruments & Instrumentation

A novel voice coil motor-driven compliant micropositioning stage based on flexure mechanism

Jiangkun Shang et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2015)

Add to Collection

Review Physics, Applied

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

W. E. King et al.

APPLIED PHYSICS REVIEWS (2015)

Add to Collection

Article Engineering, Multidisciplinary

A simple compliance modeling method for flexure hinges

Zhu ZhiWei et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2015)

Add to Collection

Article Engineering, Mechanical

Preload characteristics identification of the piezoelectric-actuated 1-DOF compliant nanopositioning platform

Ruizhou Wang et al.

FRONTIERS OF MECHANICAL ENGINEERING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

New Methods for Developing and Manufacturing Compliant Mechanisms Utilizing Bulk Metallic Glass

Eric R. Homer et al.

ADVANCED ENGINEERING MATERIALS (2014)

Add to Collection

Article Engineering, Manufacturing

Multiple-Material Topology Optimization of Compliant Mechanisms Created Via PolyJet Three-Dimensional Printing

Andrew T. Gaynor et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)

Add to Collection

Article Engineering, Electrical & Electronic

A rotary comb-actuated microgripper with a large displacement range

Honglong Chang et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2014)

Add to Collection

Article Engineering, Mechanical

Analysis of the displacement of distributed compliant parallel-guiding mechanism considering parasitic rotation and deflection on the guiding plate

Luo Yuanqiang et al.

MECHANISM AND MACHINE THEORY (2014)

Add to Collection

Article Engineering, Mechanical

Design and analysis of a novel flexure-based 3-DOF mechanism

Umesh Bhagat et al.

MECHANISM AND MACHINE THEORY (2014)

Add to Collection

Article Engineering, Multidisciplinary

Development of a piezoelectrically actuated two-degree-of-freedom fast tool servo with decoupled motions for micro-/nanomachining

Zhiwei Zhu et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)

Add to Collection

Article Instruments & Instrumentation

Design and experiment of generalized triple-cross-spring flexure pivots applied to the ultra-precision instruments

Lang Liu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2014)

Add to Collection

Article Engineering, Mechanical

Design and Kinematics Modeling of a Novel 3-DOF Monolithic Manipulator Featuring Improved Scott-Russell Mechanisms

Yanding Qin et al.

JOURNAL OF MECHANICAL DESIGN (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Large range dual-axis micro-stage driven by electrostatic comb-drive actuators

Mohammad Olfatnia et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)

Add to Collection

Article Engineering, Mechanical

Design, testing and precision control of a novel long-stroke flexure micropositioning system

Qingsong Xu

MECHANISM AND MACHINE THEORY (2013)

Add to Collection

Article Engineering, Multidisciplinary

Analysis and design of a cartwheel-type flexure hinge

Dongwoo Kang et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)

Add to Collection

Article Instruments & Instrumentation

Design, analysis and testing of a parallel-kinematic high-bandwidth XY nanopositioning stage

Chun-Xia Li et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2013)

Add to Collection

Article Instruments & Instrumentation

Hybrid flexure hinges

Rongzhou Lin et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2013)

Add to Collection

Article Instruments & Instrumentation

A novel flexure-based microgripper with double amplification mechanisms for micro/nano manipulation

Xiantao Sun et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2013)

Add to Collection

Article Engineering, Mechanical

A Comprehensive Elliptic Integral Solution to the Large Deflection Problems of Thin Beams in Compliant Mechanisms

Aimei Zhang et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2013)

Add to Collection

Article Engineering, Mechanical

Characterization of three-dimensional dynamics of piezo-stack actuators

B. Arda Gozen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Design of a compact serial-kinematic scanner for high-speed atomic force microscopy: an analytical approach

S. P. Wadikhaye et al.

MICRO & NANO LETTERS (2012)

Add to Collection

Review Instruments & Instrumentation

Invited Review Article: High-speed flexure-guided nanopositioning: Mechanical design and control issues

Y. K. Yong et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2012)

Add to Collection

Article Engineering, Electrical & Electronic

Novel ultra-lightweight and high-resolution MEMS X-ray optics for space astronomy

Ikuyuki Mitsuishi et al.

SENSORS AND ACTUATORS A-PHYSICAL (2012)

Add to Collection

Article Automation & Control Systems

Design and fabrication of miniature compliant hinges for multi-material compliant mechanisms

Wojciech Bejgerowski et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

Add to Collection

Article Engineering, Mechanical

Modeling and Experiments of Buckling Modes and Deflection of Fixed-Guided Beams in Compliant Mechanisms

Gregory L. Holst et al.

JOURNAL OF MECHANICAL DESIGN (2011)

Add to Collection

Article Engineering, Mechanical

Analytical modeling, optimization and testing of a compound bridge-type compliant displacement amplifier

Qingsong Xu et al.

MECHANISM AND MACHINE THEORY (2011)

Add to Collection

Article Engineering, Mechanical

Screw Theory Based Methodology for the Deterministic Type Synthesis of Flexure Mechanisms

Jingjun Yu et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2011)

Add to Collection

Article Engineering, Mechanical

An Intrinsic Geometric Framework for the Building Block Synthesis of Single Point Compliant Mechanisms

Girish Krishnan et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2011)

Add to Collection

Article Engineering, Mechanical

Fabrication of compliant mechanisms on the mesoscale

G. R. Hayes et al.

MECHANICAL SCIENCES (2011)

Add to Collection

Article Engineering, Mechanical

A Generalized Constraint Model for Two-Dimensional Beam Flexures: Nonlinear Load-Displacement Formulation

Shorya Awtar et al.

JOURNAL OF MECHANICAL DESIGN (2010)

Add to Collection

Article Engineering, Multidisciplinary

Study on intelligent control system of two-dimensional platform based on ultra-precision positioning and large range

Yang Chuan et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)

Add to Collection

Article Engineering, Multidisciplinary

An effective pseudo-rigid-body method for beam-based compliant mechanisms

Xu Pei et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)

Add to Collection

Article Engineering, Multidisciplinary

Synthesis of multi-degree of freedom, parallel flexure system concepts via Freedom and Constraint Topology (FACT) - Part I: Principles

Jonathan B. Hopkins et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Displacement amplifier for piezoelectric actuator based on honeycomb link mechanism

Mikio Muraoka et al.

SENSORS AND ACTUATORS A-PHYSICAL (2010)

Add to Collection

Article Engineering, Mechanical

Negative Stiffness Building Blocks for Statically Balanced Compliant Mechanisms: Design and Testing

Karin Hoetmer et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Design, Identification, and Control of a Flexure-Based XY Stage for Fast Nanoscale Positioning

Yuen Kuan Yong et al.

IEEE TRANSACTIONS ON NANOTECHNOLOGY (2009)

Add to Collection

Article Engineering, Mechanical

FPGA-based adaptive backstepping fuzzy control for a micro-positioning Scott-Russell mechanism

Rong-Fong Fung et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2009)

Add to Collection

Article Engineering, Mechanical

Development and dynamic modelling of a flexure-based Scott-Russell mechanism for nano-manipulation

Yanling Tian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2009)

Add to Collection

Article Engineering, Multidisciplinary

Design and forward kinematics of the compliant micro-manipulator with lever mechanisms

Y. Tian et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)

Add to Collection

Article Engineering, Mechanical

A Screw Theory Approach for the Conceptual Design of Flexible Joints for Compliant Mechanisms

Hai-Jun Su et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2009)

Add to Collection

Article Mechanics

Large deflection of cantilever beams with geometric non-linearity: Analytical and numerical approaches

A. Banerjee et al.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2008)

Add to Collection

Article Engineering, Mechanical

A building block approach to the conceptual synthesis of compliant mechanisms utilizing compliance and stiffness ellipsoids

Charles J. Kim et al.

JOURNAL OF MECHANICAL DESIGN (2008)

Add to Collection

Article Engineering, Mechanical

Kinematic design of large displacement precision XY positioning stage by using cross strip flexure joints and over-constrained mechanism

Yeong-jun Choi et al.

MECHANISM AND MACHINE THEORY (2008)

Add to Collection

Review Engineering, Multidisciplinary

Review of circular flexure hinge design equations and derivation of empirical formulations

Yuen Kuan Yong et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)

Add to Collection

Review Instruments & Instrumentation

Invited Review Article: Accurate and fast nanopositioning with piezoelectric tube scanners: Emerging trends and future challenges

S. O. Reza Moheimani

REVIEW OF SCIENTIFIC INSTRUMENTS (2008)

Add to Collection

Article Engineering, Mechanical

Constraint-based design of parallel kinematic XY flexure mechanisms

Shorya Awtar et al.

JOURNAL OF MECHANICAL DESIGN (2007)

Add to Collection

Article Physics, Applied

Durability properties of piezoelectric stack actuators under combined electromechanical loading

Pavel M. Chaplya et al.

JOURNAL OF APPLIED PHYSICS (2006)

Add to Collection

Article Engineering, Electrical & Electronic

Analysis of the displacement amplification ratio of bridge-type flexure hinge

Hong-Wen Ma et al.

SENSORS AND ACTUATORS A-PHYSICAL (2006)

Add to Collection

Article Automation & Control Systems

Control of a particular micro-macro positioning system applied to cell micromanipulation

Michael Gauthier et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2006)

Add to Collection

Article Engineering, Multidisciplinary

Design of a six-axis micro-scale nanopositioner -: μHexFlex

Shih-Chi Chen et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2006)

Add to Collection

Article Engineering, Electrical & Electronic

Optimal design of a micro-positioning Scott-Russell mechanism by Taguchi method

JL Ha et al.

SENSORS AND ACTUATORS A-PHYSICAL (2006)

Add to Collection

Article Engineering, Mechanical

Dynamic modeling of compliant mechanisms based on the pseudo-rigid-body model

YQ Yu et al.

JOURNAL OF MECHANICAL DESIGN (2005)

Add to Collection

Article Engineering, Industrial

Incremental sheet metal forming on CNC milling machine-tool

J Kopac et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

Add to Collection

Article Engineering, Multidisciplinary

Dimensionless design graphs for flexure elements and a comparison between three flexure elements

WO Schotborgh et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2005)

Add to Collection

Article Engineering, Electrical & Electronic

Large rotation actuated by in-plane rotary comb-drives with serpentine spring suspension

JA Yeh et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)

Add to Collection

Review Materials Science, Multidisciplinary

Smart materials, precision sensors/actuators, smart structures, and structronic systems

HS Tzou et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Dual-stack piezoelectric device with bidirectional actuation and improved performance

DE Heverly et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2004)

Add to Collection

Article Engineering, Industrial

A three-DOF compliant micromotion stage with flexure hinges

TF Lu et al.

INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL (2004)

Add to Collection

Article Engineering, Electrical & Electronic

Design of a preload device for PZT actuator using permanent magnets

S Baek et al.

IEEE TRANSACTIONS ON MAGNETICS (2003)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanisms

N Lobontiu et al.

COMPUTERS & STRUCTURES (2003)

Add to Collection

Article Engineering, Mechanical

A finite-element-based method to determine the spatial stiffness properties of a notch hinge

SL Zhang et al.

JOURNAL OF MECHANICAL DESIGN (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.