☆ 4.8 Article

Bionic study on latent heat thermal storage

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Investigation on the thermal performance of a multi-tube finned latent heat thermal storage pool

Yongping Huang et al.

Summary: The study focuses on improving thermal efficiency for latent heat thermal storage pools (LHTSPs) by designing a new multi-tube LHTSP with tree-shaped fins. The enthalpy-porosity approach is employed to model the charging/discharging process, while experimental validation is conducted to ensure reliability. Results show that tree-shaped fins effectively improve thermal efficiency and temperature uniformity, with inclination significantly affecting thermal charging performance and vertical arrangements reducing melting duration by 46.3%.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Experimental and numerical study on flow characteristic and thermal performance of macro-capsules phase change material with biomimetic oval structure

Yan Dong et al.

Summary: The emergence of bionics in engineering technology has provided new ideas for innovation, particularly in the fields of energy storage and heat transfer enhancement. By utilizing biomimetic oval structures for heat storage units with phase change material capsules, improvements in flow characteristics and thermal performance have been achieved. Experimental and numerical analyses indicate that oval shaped capsules have shorter melting times and higher Nusselt numbers compared to sphere capsules.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Experimental and numerical studies on the heat transfer improvement of a latent heat storage unit using gradient tree-shaped fins

Yongping Huang et al.

Summary: This study investigated two innovative horizontal latent heat storage (LHS) units using uniform and gradient tree-shaped fins, finding that the gradient tree-shaped fins accelerate melting and enhance heat transfer efficiency, while they are not conducive to the solidification process.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Discharging process and thermal evaluation in the thermal energy storage system with fractal tree-like fins

Hao Peng et al.

Summary: By inserting fractal tree-like fins into a latent heat thermal energy storage unit, the melting rate under microgravity can be significantly accelerated, resulting in reduced melting time. The presence of tree-like fins and thermocapillary convection promotes melting, with a more pronounced effect at higher bifurcation angles.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Performance investigation and optimization of latent heat storage exchangers with sandwiched tree-channels

Yongping Huang et al.

Summary: In this study, an innovative shell-and-tube latent heat storage exchanger (LHSE) with sandwiched tree-channels is designed to overcome the inefficiency of thermal transport. Numerical simulations and response surface method (RSM) are used to investigate the melting performance and optimize the structure of the innovative LHSE. The results show that the innovative LHSE unit improves the melting rate and temperature uniformity compared to traditional LHSE units, and the structural parameters of the sandwiched tree-channels significantly affect the melting performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A novel honeycomb-like porous carbon from loofah sponge for form-stable phase change materials with high encapsulation capacity and reliability

Hongxi Su et al.

Summary: Form-stable composite phase change materials (PCM) consisting of paraffin and honeycomb-like porous carbons have been developed, showing high encapsulation capacity and reliability for thermal storage applications. The porous carbons derived from natural loofah sponge with rich honeycomb-like pores were carbonized under different temperatures to provide a supporting framework for loading paraffin, resulting in high loading rate and enthalpy. The composite PCMs have the advantages of inexpensive porous fibers with mechanical prosperity and good thermal storage capacity.

MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Biomimetic hydrophilic foam with micro/nano-scale porous hydrophobic surface for highly efficient solar-driven vapor generation

Yeran Li et al.

Summary: Inspired by leaf transpiration, a novel bionic leaf design achieved highly efficient solar vapor generation, with high evaporation rate, under natural sunlight.

SCIENCE CHINA-MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Bioinspired solar anti-icing/de-icing surfaces based on phase-change materials

Siyu Sheng et al.

Summary: The study investigates a solar phase-change material (SPCM) composed of expanded graphite (EG)/paraffin/polydimethylsiloxane (PDMS) that can effectively collect and store solar energy for anti-icing/de-icing purposes. The SPCM surface demonstrates excellent anti-icing/de-icing properties, maintaining a high de-icing rate and long freeze-delay time even at ultra-low temperatures. This research provides a promising approach for utilizing solar energy in anti-icing/de-icing applications.

SCIENCE CHINA-MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

Bioinspired Materials for Energy Storage

Jun Mei et al.

Summary: This review discusses the progress and design principles of bioinspired materials in energy storage applications, highlighting the excellent performance of bioinspired designs in electrodes and electrolytes. Future research focuses on overcoming current challenges and further learning from nature for intelligent energy storage system design.

SMALL METHODS (2022)

Add to Collection

Article Energy & Fuels

Experimental study on thermal performance of a novel medium-high temperature packed-bed latent heat storage system containing binary nitrate

Wei Wang et al.

Summary: The packed-bed latent heat storage (PBLHS) system has been extensively studied for its low investment cost and potential applications. This study focuses on the thermal performance of PBLHS systems operating at medium-high temperatures, which is underexplored in previous research. The researchers designed and constructed a novel experimental system for medium-high temperature PBLHS, using a binary nitrate NaNO3-KNO3 as the phase change material. The experiments investigate the heat transfer characteristics during the charging, static heat preservation, and discharging processes, as well as the effect of the temperature and flow rate of the heat transfer fluid on the pressure drop of the PBLHS system. The results provide valuable experimental data for the structural optimization design and industrial application of packed-bed TES systems.

APPLIED ENERGY (2022)

Add to Collection

Article Engineering, Multidisciplinary

Nanofiber electrospinning combined with rotary bioprinting for fabricating small-diameter vessels with endothelium and smooth muscle

Qianheng Jin et al.

Summary: A novel approach for fabricating bionic small-diameter vascular vessels has been developed by combining nanofiber electrospinning and a specially-designed rotary bioprinter. The modified bioprinter enables the printing of a Methacrylated Gelatin (GelMA) structure containing smooth muscle cells, resulting in a bionic structure with superior properties compared to natural blood vessels.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Numerical study on the thermal performance analysis of packed-bed latent heat thermal storage system with biomimetic vein hierarchical structure

Yan Dong et al.

Summary: This study introduces the biomimetic vein hierarchical structure in the packed-bed latent heat thermal energy storage system (LHTESS). The research shows that this structure can improve heat transfer efficiency, temperature distribution, increase liquid fraction, and enhance the system's thermal response.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2022)

Add to Collection

Article Thermodynamics

Artificial mitochondrion for fast latent heat storage: Experimental study and lattice Boltzmann simulation

Yang Tian et al.

Summary: A bionic design of a PCM capsule inspired by mitochondrion is proposed for fast latent heat storage. The mitochondrion-shaped capsule has the fastest thermal storage rate and the lowest drag force among different PCM capsules, significantly reducing the melting time.

ENERGY (2022)

Add to Collection

Article Energy & Fuels

Fabrication and Performance of Shape-Stable Phase Change Composites Supported by Environment-Friendly and Economical Loofah Sponge Fibers for Thermal Energy Storage

Lingang Li et al.

Summary: The exploration of low-cost, short-process, environment-friendly, and well-behaved phase change composites is of great significance. This study proposes a novel shape-stable phase change composite (PCLS) supported by renewable biomass loofah sponge (LS) fibers. The LS fibers provide superior encapsulation and mechanical support for polyethylene glycol (PEG). The fabricated PCLS exhibits excellent thermal energy storage/retrieval capability, thermal cycling reliability, infrared stealth ability, and temperature regulation ability, showing great potential for applications in solar thermal-energy storage, thermal regulation, thermal insulation, and thermal camouflage and stealth.

ENERGY & FUELS (2022)

Add to Collection

Article Energy & Fuels

Improving the solidification performance of a shell-and-tube latent-heat thermal energy storage unit using a connected-Y-shaped fin

Xiao Cai et al.

Summary: This paper investigates the impact of a novel connected-Y-shaped fin on the solidification process in a shell-and-tube latent-heat thermal energy storage unit (LTESU) with phase change material (PCM). The numerical simulation method is used to study the effects of the connected-Y-shaped fin on the solidification performance, including the position and width of annulus and the ratio of outer to inner tube. The results show that the connected-Y-shaped fin can significantly enhance the solidification performance of LTESU.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Evaluation of different melting performance enhancement structures in a shell-and-tube latent heat thermal energy storage system

Ruihuan Ge et al.

Summary: This study numerically investigates two principal thermal enhancement techniques, finned tubes and conductive metal foams, in a phase change energy storage system. The simulation predictions are validated by experimental results with topology optimized fins. The results show that compared to the configuration without enhancement, the thermal energy storage rates can be increased by 3.3-5.8 times using these thermal enhancement techniques. It is found that topology optimized fins achieve the best performance, but their economic efficiency is dependent on the unit price ratio.

RENEWABLE ENERGY (2022)

Add to Collection

Article Energy & Fuels

Recent developments in nano-enhanced phase change materials for solar thermal storage

Banumathi Munuswamy Swami Punniakodi et al.

Summary: This review discusses the effects of different additives on improving the performance of nano-enhanced PCM, which helps address the heat storage issue in solar thermal systems by improving thermal conductivity and maintaining energy storage density.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Energy & Fuels

Latent heat of molten salt transport across graphite induced anisotropic interface

Zhiwei Ge et al.

Summary: The supported phase change of molten salt is a promising approach for thermal energy storage. This study reveals a diffusion-controlled latent heat transportation by a controllable graphite induced anisotropic interface, providing a better understanding of the relationship between the interfacial anisotropy and latent heat transport.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Energy & Fuels

Study on thermal performance of a new optimized snowflake longitudinal fin in vertical latent heat storage

Fan Ren et al.

Summary: This study focuses on a casing phase change heat storage unit filled with RT55. A snowflake longitudinal fin structure is proposed to improve the melting performance of the vertical latent heat storage system (LHTES) due to the low thermal conductivity of phase change materials. Numerical simulation is used to simulate the phase change heat transfer process. The enhanced heat transfer characteristics of the snowflake-shaped fin structure to the casing PCM unit are studied and compared with the ordinary rectangular longitudinal fin and the improved snowflake-shaped longitudinal fin. The results show that the combination of the snowflake finned tube structure and local heat transfer of phase change materials can significantly shorten the charging time.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Chemistry, Physical

Loofah-derived eco-friendly SiC ceramics for high-performance sunlight capture, thermal transport, and energy storage

Qiao Xu et al.

Summary: This study proposes an eco-friendly SiC ceramic based on loofah-derived materials for efficient solar thermal energy storage. After impregnation with NaCl-NaF eutectics, the ceramic demonstrates broadband solar absorption, rapid thermal transport, and compact latent heat storage.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Energy storage on demand: Thermal energy storage development, materials, design, and integration challenges

Gholamabbas Sadeghi

Summary: Climate change and increasing energy demand necessitate a shift towards more rational and sustainable energy use, which can be achieved through the deployment of innovative energy technologies. Thermal energy storage plays a significant role in managing the out-of-phase demand and generation of energy. While there are valuable review contents addressing various heat storage methods separately, there is still a need for a concise and comprehensive source of information to present related ideas and applications. The present review paper aims to investigate significant research contributions focusing on practical applications and scientific aspects of thermal energy storage systems, considering design, optimization, and integration challenges at different scales.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Thermodynamics

Evaluation of thermal performance for bionic porous ceramic phase change material using micro-computed tomography and lattice Boltzmann method

Guangpeng Feng et al.

Summary: This study utilized CT scanning and LBM for numerical simulation, providing better insight into heat transfer mechanisms and quick analysis for designing optimal porous skeletons.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Fast Self-Healing Superhydrophobic Thermal Energy Storage Coatings Fabricated by Bio-Based Beeswax and Artificially Cultivated Diatom Frustules

Haoyang Sun et al.

Summary: The study successfully prepared a biomass-based superhydrophobic thermal energy storage coating using diatom frustules and beeswax, exhibiting high heat storage capacity and self-healing capability.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Effect of Radial Porosity Oscillation on the Thermal Performance of Packed Bed Latent Heat Storage

H. B. Liu et al.

Summary: Packed bed latent heat storage is a promising method for thermal energy storage due to its high heat storage capacity and fast heat transfer rate. This study investigates the impact of radial porosity oscillation on fluid flow and heat transfer in a packed bed system, and discusses the effects of different dimensionless parameters on the system performance.

ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Biomass-based shape-stabilized phase change materials from artificially cultured ship-shaped diatom frustules with high enthalpy for thermal energy storage

Bangyao Wu et al.

Summary: The study focused on preparing ship-shaped diatom frustule-based composite ss-PCMs with high PEG absorption capacity for thermal energy storage. The research found that diatom frustules calcined at 400 degrees Celsius had a suitable specific surface area for PEG support.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Encapsulation of high specific surface area red blood cell-like mesoporous carbon spheres by magnetic nanoparticles: A new strategy to realize multiple electromagnetic wave loss mechanism

Bo Wei et al.

Summary: This study proposes an advanced strategy to develop a novel microwave absorbing material (MRBC) by encapsulating red blood cell-like mesoporous carbon spheres with magnetic nanoparticles. The MRBC exhibits ultra-high specific surface area, uniform mesoporous properties, and a special hollow structure, achieving a wide absorption band and low density to effectively reduce the harm of electromagnetic radiation to the human body.

CARBON (2021)

Add to Collection

Article Thermodynamics

Topology optimization for heat transfer enhancement in latent heat storage

Q. Y. Yao et al.

Summary: In this paper, the flow channel layout in a latent heat storage unit was optimized through topology optimization with a focus on balancing heat transfer effects and flow resistance. Results showed that as heat transfer weighting increased, channel structures became more complex, leading to improved heat transfer performance at the expense of increased pressure drop.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Performance analysis of axial air cooling system with shark-skin bionic structure containing phase change material

Wen Yang et al.

Summary: A novel heat sink inspired by shark-skin microstructure is proposed to improve the cooling efficiency and temperature consistency of battery module, combined with axial air cooling and phase change material. Through optimization of the structure parameters, the heat sink shows significant reduction in maximum temperature and temperature difference of the battery module, leading to lower energy consumption.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Potential of diatoms as phase change materials

Hirotaka Maeda et al.

Summary: The study utilized diatoms and gypsum to prepare phase change material composites, with results showing that samples with over 11% diatom content had higher thermal diffusivities, and the 4% diatom sample exhibited the lowest maximum temperature during heating.

MATERIALS LETTERS (2021)

Add to Collection

Article Energy & Fuels

Improving the thermal energy storage capability of diatom-based biomass/polyethylene glycol composites phase change materials by artificial culture methods

Jintao Huang et al.

Summary: A novel shape-stabilized phase change material (SSPCM) made from polyethylene glycol (PEG) and diatom-based biomass was reported. The SSPCM showed good phase change performance and thermal stability, making it suitable for waste heat recovery and temperature regulation applications.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Thermodynamics

Experimental investigation on the melting and solidification performance enhancement of a fractal latent heat storage unit

Yongping Huang et al.

Summary: This study presents a fractal latent heat storage unit with tree-shaped fins to enhance heat exchange efficiency. Experimental results indicate that inclination angle significantly affects melting processes, especially in the axial direction. The overall thermal performance of fractal LHS units is superior to traditional LHS units, with vertical units showing a maximum reduction in complete melting duration of 52.6%.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Numerical investigation on improving the heat storage and transfer performance of ceramic /D-mannitol composite phase change materials by bionic graded pores and nanoparticle additives

Daili Feng et al.

Summary: This research proposes two methods to enhance the performance of latent heat storage system, including using biomimetic double-gradient porous ceramic and adding carbon-based nanoparticles. The optimized structure significantly increases the effective thermal conductivity and heat transfer rate of the composite material.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Biomimetic Transpiration Textile for Highly Efficient Personal Drying and Cooling

Dongyang Miao et al.

Summary: The biomimetic transpiration textile demonstrated in this study, based on the hierarchical and interconnected network of vascular plants, shows highly efficient personal drying and cooling capabilities. The optimized performance and proposed mechanisms provide promising benefits for the development of multifunctional drying and cooling textiles.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Performance study of a novel funnel shaped shell and tube latent heat thermal energy storage system

Ashish Kumar et al.

Summary: This study investigates the impact of a funnel-shaped configuration on the thermal performance of latent heat thermal energy storage systems. By introducing a funnel shape and longitudinal fins in the shell and tube storage tank, a more uniform temperature distribution in the phase change material is achieved, leading to significant improvements in energy efficiency and latent heat content.

RENEWABLE ENERGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Effect of two different fins (longitudinal-tree like) and hybrid nano-particles (MoS2 - TiO2) on solidification process in triplex latent heat thermal energy storage system

Kh Hosseinzadeh et al.

Summary: This study explores the use of a triplex-tube heat exchanger with hybrid nanoparticles to address the weak thermal conductivity of Phase Change Material (PCM) based storage units. Through Galerkin Finite Element Method (GFEM) analysis and experimental validation, it was found that the combined usage of nanoparticles and tree-like fins significantly reduces solidification time, with tree-like fins demonstrating the best performance.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

Thermal performance of honeycomb-like battery thermal management system with bionic liquid mini-channel and phase change materials for cylindrical lithium-ion battery

Wen Yang et al.

Summary: A novel honeycomb-like battery thermal management system with bionic liquid mini-channel and phase change materials is proposed to enhance the working performance of lithium-ion batteries. Computational fluid dynamics and a second-order equivalent circuit model are utilized to numerically investigate the thermal performance of the battery module. The use of a hexagonal cooling plate design, along with back propagation neural networks to estimate appropriate inlet flow rates, helps stabilize the battery module's temperature within desired limits.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Bionic topology optimization of fins for rapid latent heat thermal energy storage

Yang Tian et al.

Summary: A bionic topology optimization method is proposed to enhance thermal storage/release performances, leading to significantly reduced melting and solidification time. The similarity between the fractal dimension of optimized fins and leaf structure contributes to better synergy between flow and heat transfer. These findings provide a new approach for the design of high performance LHS devices.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

An optimization study of solidification procedure in a wavy- wall storage unit considering the impacts of NEPCM and curved fin

M. Alizadeh et al.

Summary: The study developed a numerical scheme to optimize the solidification process in Latent Heat Thermal Energy Storage System (LHTESS), finding that using 4% SWCNT-enhanced PCM accelerates the process by 40.9%, while optimizing fin configuration reduces FST by 61.54%; employing curved fins was reported as a more effective approach compared to nanoparticle addition.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Energy & Fuels

Performance enhancement of a maple leaf-shaped latent heat energy storage unit by adding nanoparticles and leaf vein fins

A. K. Rostami et al.

Summary: The solidification process of phase change material in a Maple Leaf-shaped Latent Heat Energy Storage system was investigated using fins and nanoparticles as heat transfer enhancement methods. The research optimized the use of innovative fins and examined the effectiveness of two different methods for improving the thermal conductivity of PCM.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Dynamic performance of a novel air-soil heat exchanger coupling with diversified energy storage components-modelling development, experimental verification, parametrical design and robust operation

Di Qin et al.

Summary: A novel vertical air-soil heat exchanger (VASHE) with diversified energy storage components, including annular and tubular phase change material (PCM), is proposed. An enthalpy-based model is developed to characterize the heat transfer mechanism in PCM. Results show that RT 20 in tubular PCM is the most promising, and accurate PCM location is an effective solution to balance cooling capacity and outlet temperature amplitude.

RENEWABLE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

All in One, Self-Powered Bionic Artificial Nerve Based on a Triboelectric Nanogenerator

Qian Zhang et al.

Summary: The APTN is an all-in-one artificial perception and transmission nerve system that mimics the biological sensory and nervous ability, showing excellent reliability with a single triboelectric electrode. By tailoring the geometry, different shapes of APTNs can be designed for specific applications like 2D detection.

ADVANCED SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Bioinspired Energy Storage and Harvesting Devices

Jing Ren et al.

Summary: Knowledge learned from nature shows that hierarchical structural design can enhance system performance, with significant implications for synthetic materials. Bioinspired strategies are being used in the design of energy storage and harvesting devices to meet the challenges of the rapidly developing electronic industry. By applying lessons from nature, enhanced performance and stability for energy devices can be achieved, with future research expectations and energy management being discussed.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Biomimetic Solid-Liquid Transition Structural Dye-Doped Liquid Crystal/Phase-Change-Material Microcapsules Designed for Wearable Bistable Electrochromic Fabric

Mingfei Sheng et al.

Summary: A novel polymer microcapsule-filled dye-doped liquid crystal (DDLC) and phase-change material (PCM) system was proposed for making an electrochromic fiber with both bistable electric-optical capability and knitting characteristics. The optimized fiber can reversibly change between colored and colorless states according to the electric field, and both states remain stable for over 1 week. Additionally, the fiber has a satisfactory driving voltage below the human safe voltage, showing potential in a wide range of applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Thermodynamics

Performance analysis of phase change material in battery thermal management with biomimetic honeycomb fin

Fen Liu et al.

Summary: The study investigates the impact of honeycomb fins on battery temperature, finding that they can effectively reduce the temperature and improve melting efficiency. Optimal values for porosity, cooling plate thickness, and number of holes are suggested.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Construction of wood-based cellulose micro-framework composite form-stable multifunctional materials with thermal and electrical response via incorporating erythritol-urea (thiourea)-carbon nanotubes

Xiang Qin et al.

Summary: In this study, form-stable multifunctional materials with thermal and electrical response were synthesized by combining wood-based honeycomb-like celluloses micro-framework, carbon nanotubes, and erythritol-urea/thiourea. The materials exhibited high latent heat values and thermal conductivity, as well as excellent thermal stability and latent heat retention after multiple heating-cooling cycles. Furthermore, they showed great potential in light-heat energy conversion-storage and thermal-electrical response performance.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Energy & Fuels

Numerical investigation of a double-pipe latent heat thermal energy storage with sinusoidal wavy fins during melting and solidification

Amin Shahsavar et al.

Summary: This study investigated the phase change process in a double-pipe latent heat storage system with sinusoidal wavy fins, which resulted in significant efficiency improvements. The best wave profile was determined to have a wave-amplitude of 2 mm and a wavelength of 1 mm. Additionally, the characteristics of the water flow in the system were found to impact performance.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Thermodynamics

Thermal Performance Analysis of PCM Capsules Packed-Bed System with Biomimetic Leaf Hierarchical Porous Structure

Yan Dong et al.

Summary: The study introduces the concept of using a bionic leaf hierarchical porous structure packed-bed latent heat thermal energy storage system with optimized PCM capsule diameters along the flow direction. Results show that the bionic leaf hierarchical porous structure can reduce thermocline thickness, decrease pressure drop, increase heat transfer area, and enhance thermal response compared to a conventional uniform model.

JOURNAL OF THERMAL SCIENCE (2021)

Add to Collection

Article Thermodynamics

Numerical research on the effect of leaf venation shape bionic surface extension and the location on latent heat storage system

Zhihao Li et al.

Summary: This research studied the charging process of a solar power latent heat thermal energy storage system with a bionic leaf venation design. By establishing transient 3D models and analyzing the impact of venation structure extension at different positions, it was found that the extension and position on the Z axis have significant effects on heat diffusion. The optimal distance for improving thermal consistency was speculated to be between 1 and 2 mm from the bottom.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Numerical study on the performance of shell-and-tube thermal energy storage using multiple PCMs and gradient copper foam

Liang Pu et al.

Summary: This study investigates the use of multiple phase change materials and gradient copper foam to accelerate the melting of phase change materials and improve heat transfer effectiveness. Results indicate that the utilization of single PCM shows better heat transfer effectiveness compared to radial multiple PCMs. Additionally, the negative gradient type of copper foam offers the best heat transfer effectiveness.

RENEWABLE ENERGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Charging and discharging enhancement of a vertical latent heat storage unit by fractal tree-shaped fins

Yongping Huang et al.

Summary: The use of tree-shaped fins can enhance the thermal performance of vertical LHS units, improving temperature uniformity and accelerating the melting/solidification rate.

RENEWABLE ENERGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Numerical study on the thermal performance of packed-bed latent heat thermal energy storage system with biomimetic alveoli structure capsule

FuQiang Wang et al.

Summary: This study introduces the application of bionics in heat storage units, showing that biomimetic alveoli structure can improve thermal response, increase specific surface area, and speed up heat storage process.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bean-Pod-Inspired 3D-Printed Phase Change Microlattices for Solar-Thermal Energy Harvesting and Storage

Zhengpeng Yang et al.

Summary: This study demonstrates a simple and scalable 3D printing strategy to directly construct phase change materials micro-lattices, enabling more efficient solar-thermal energy harvesting and transfer. The structures possess high thermal conductivity and large heat storage efficiency.

SMALL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Spider Web-Inspired Graphene Skeleton-Based High Thermal Conductivity Phase Change Nanocomposites for Battery Thermal Management

Ying Lin et al.

Summary: This study introduces a new strategy for fabricating highly thermally conductive phase change composites by constructing a spider web-like structured graphene skeleton in paraffin wax, significantly enhancing the material's thermal conductivity. The results demonstrate that the composite exhibits remarkably high thermal conductivity enhancements at low filler loading, showing promising applications in battery thermal management.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Bioinspired soft caterpillar robot with ultra-stretchable bionic sensors based on functional liquid metal

Guoqing Jin et al.

Summary: The soft caterpillar robot SCR integrates ultra-stretchable bionic sensors to achieve autonomous sensing and adaptability, mimicking biological actions and responses to adapt and move in unknown environments.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

Sponge gourd-bioinspired phase change material with high thermal conductivity and excellent shape-stability

Yanjuan Liang et al.

Summary: A novel phase change material PW/EG@GO with a core-shell structure was prepared, exhibiting enhanced thermal conductivity and shape stability. The material has high latent heat values and thermal stability, making it suitable for thermal energy storage applications.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Magnetic Field-induced Enhancement of Phase Change Heat Transfer via Biomimetic Porous Structure for Solar-thermal Energy Storage

Juan Li et al.

Summary: The research successfully produced biomimetic phase change composites with improved storage efficiency, further enhanced by the application of magnetic field. This method has potential uses in various sustainable applications.

JOURNAL OF BIONIC ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Seagrass-inspired design of soft photocatalytic sheets based on hydrogel-integrated free-standing 2D nanoassemblies of multifunctional nanohexagons

Zijun Yong et al.

Summary: A novel 2D hydrogel-integrated photocatalytic sheet inspired by seagrass has been developed, utilizing the self-assembling properties of multifunctional nanohexagons to achieve continuous photochemical reactions. This design offers high efficiency, continuous operation without the need of catalyst regeneration, and omnidirectional light-harvesting capability under low-intensity sunlight.

MATERIALS HORIZONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ordered inverse-opal scaffold based on bionic transpiration to create a biomimetic spine

Yanru Yang et al.

Summary: This study aims to fabricate a new three-dimensional scaffold with electrically micropatterned materials by forming scaffold templates through self-assembled colloidal crystals and fabricating specific 3D conductive inter-surface ordered microstructures through carbonization and corrosion, providing potential alternative scaffolds for nerve tissue engineering.

NANOSCALE (2021)

Add to Collection

Article Thermodynamics

Maximization of performance in multi-tube latent heat storage - Optimization of fins topology, effect of materials selection and flow arrangements

Alberto Pizzolato et al.

ENERGY (2020)

Add to Collection

Article Energy & Fuels

Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins

Chengbin Zhang et al.

APPLIED ENERGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Solidification performance of heat exchanger with tree-shaped fins

Jiayi Zheng et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Engineering, Aerospace

Bionic design for the aerodynamic shape of a stratospheric airship

Yang Yueneng et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Thermodynamics

Honeycomb carbon fibers strengthened composite phase change materials for superior thermal energy storage

Nan Sheng et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

Fatty amines/graphene sponge form-stable phase change material composites with exceptionally high loading rates and energy density for thermal energy storage

Tao Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Energy & Fuels

Role of tree-shaped fins in charging performance of a latent heat storage unit

Suchen Wu et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Thermodynamics

A numerical investigation of the melting heat transfer characteristics of phase change materials in different plate heat exchanger (latent heat thermal energy storage) systems

Baris Gurel

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Energy & Fuels

Integrated analysis of the energy and economic efficiency of PCM as an indoor decoration element: Application to an apartment building

Beom Yeol Yun et al.

SOLAR ENERGY (2020)

Add to Collection

Article Energy & Fuels

Design of 3D-network montmorillonite nanosheet/stearic acid shape-stabilized phase change materials for solar energy storage

Hao Yi et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A lightweight bionic design for a scanner based on the 3D architecture of root system of pine trees

Liangbao Liu et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

Add to Collection

Article Multidisciplinary Sciences

A bioinspired analogous nerve towards artificial intelligence

Xinqin Liao et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Energy & Fuels

Performance evaluation of melting/solidification mechanism in a variable wave-length wavy channel double-tube latent heat storage system

Amin Shahsavar et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Energy & Fuels

Fabrication of heat storage pellets composed of microencapsulated phase change material for high-temperature applications

Hiroki Sakai et al.

APPLIED ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Bionic 3D printed corals

Daniel Wangpraseurt et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tillandsia-Inspired Hygroscopic Photothermal Organogels for Efficient Atmospheric Water Harvesting

Feng Ni et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Energy & Fuels

Gradient design of pore parameters on the melting process in a thermal energy storage unit filled with open-cell metal foam

Xiaohu Yang et al.

APPLIED ENERGY (2020)

Add to Collection

Article Energy & Fuels

Optimizing heat-absorption efficiency of phase change materials by mimicking leaf vein morphology

Honglei Liu et al.

APPLIED ENERGY (2020)

Add to Collection

Article Thermodynamics

Additive manufacturing of a topology-optimised multi-tube energy storage device: Experimental tests and numerical analysis

Ruihuan Ge et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Thermal performance evaluation for solidification process of latent heat thermal energy storage in a corrugated plate heat exchanger

Baris Gurel

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Charging performance optimization of a latent heat storage unit with fractal tree-like fins

Cheng Yu et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Cross-Species Bioinspired Anisotropic Surfaces for Active Droplet Transportation Driven by Unidirectional Microcolumn Waves

Yuegan Song et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Thermodynamics

Investigation on charging enhancement of a latent thermal energy storage device with uneven tree-like fins

Xiangdong Liu et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

High latent heat and recyclable form-stable phase change materials prepared via a facile self-template method

Yunzhi Tan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Melting heat transfer enhancement of a horizontal latent heat storage unit by fern-fractal fins

Zilong Deng et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Numerical research on performance comparison of multi-layer high temperature latent heat storage under different structure parameter

Peisheng Li et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of internal fins along with Hybrid Nano-Particles on solid process in star shape triplex Latent Heat Thermal Energy Storage System by numerical simulation

Kh Hosseinzadeh et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Engineering, Mechanical

Transfer of functional structures from multiple bovine teeth to a multilevel grinding head via a biomimetic approach

Jindong Wang et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Thermodynamics

Thermal performance of structured packed bed with encapsulated phase change materials

Zhenya Duan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Energy & Fuels

Numerical study of forced convection over phase change material capsules in a traditional spherical shape and a biomimetic shape

Xiwen Cheng et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Review Energy & Fuels

Medium- and high-temperature latent and thermochemical heat storage using metals and metallic compounds as heat storage media: A technical review

Y. Zhao et al.

APPLIED ENERGY (2020)

Add to Collection

Article Energy & Fuels

Numerical analysis and improvement of the thermal performance in a latent heat thermal energy storage device with spiderweb-like fins

Liangyu Wu et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Multidirectionally Thermoconductive Phase Change Material Enables High and Durable Electricity via Real-Environment Solar-Thermal-Electric Conversion

Dingyao Liu et al.

ACS NANO (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

A Plant Bioreactor for the Synthesis of Carbon Nanotube Bionic Nanocomposites

Giulia Magnabosco et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Artificial photosynthetic assemblies constructed by the self-assembly of synthetic building blocks for enhanced photocatalytic hydrogen evolution

Jin Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Bioinspired roll-to-roll solar-thermal energy harvesting within form-stable flexible composite phase change materials

Chao Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Energy & Fuels

Magnetically-accelerated photo-thermal conversion and energy storage based on bionic porous nanoparticles

Lei Shi et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Chemistry, Physical

Knitting aryl network polymers (KAPs)-embedded copper foam enables highly efficient thermal energy storage

Changhui Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Thermodynamics

A comparative investigation of the effect of honeycomb core on the latent heat storage with PCM in solar air heater

Mesut Abuska et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

A new type of heat storage system using the motion of phase change materials in an elliptical-shaped capsule

Dong Ho Shin et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Chemistry, Physical

Solidification process of hybrid nano-enhanced phase change material in a LHTESS with tree-like branching fin in the presence of thermal radiation

Kh. Hosseinzadeh et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Thermodynamics

Investigation of charging and discharging characteristics of a horizontal conical shell and tube latent thermal energy storage device

Gurpreet Singh Sodhi et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Energy & Fuels

Cotton-derived carbon sponge as support for form-stabilized composite phase change materials with enhanced thermal conductivity

Nan Sheng et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Add to Collection

Article Energy & Fuels

Thermal energy storage characteristics of myristic acid-palmitic eutectic mixtures encapsulated in PMMA shell

Ahmet Sari et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Add to Collection

Article Energy & Fuels

Experimental analysis of solar air collector with PCM-honeycomb combination under the natural convection

Mesut Abuska et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Add to Collection

Article Energy & Fuels

High energy-density and power-density thermal storage prototype with hydrated salt for hot water and space heating

T. X. Li et al.

APPLIED ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Effect of nanoparticle shape factor and snowflake crystal structure on discharging acceleration LHTESS containing (Al2O3 - GO) HNEPCM

Kh Hosseinzadeh et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Thermodynamics

Melting and solidification characteristics of a double-pipe latent heat storage system with sinusoidal wavy channels embedded in a porous medium

Amin Shahsavar et al.

ENERGY (2019)

Add to Collection

Article Construction & Building Technology

Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube

Shengxiang Deng et al.

ENERGY AND BUILDINGS (2019)

Add to Collection

Article Thermodynamics

Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source

Pouyan Talebizadeh Sardari et al.

ENERGY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Hierarchical nanomaterials via biomolecular self-assembly and bioinspiration for energy and environmental applications

Coucong Gong et al.

NANOSCALE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Constructing reduced graphene oxide/boron nitride frameworks in melamine foam towards synthesizing phase change materials applied in thermal management of microelectronic devices

Fei Xue et al.

NANOSCALE (2019)

Add to Collection

Article Thermodynamics

Numerical comparison between single PCM and multi-stage PCM based high temperature thermal energy storage for CSP tower plants

K. E. Elfeky et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Experimental study on the thermodynamic performance of cascaded latent heat storage in the heat charging process

Y. Zhao et al.

ENERGY (2018)

Add to Collection

Article Thermodynamics

Preparation and investigation of distinct and shape stable paraffin/SiO2 composite PCM nanospheres

George V. Belessiotis et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Geometric and design parameters of fins employed for enhancing thermal energy storage systems: a review

Ammar M. Abdulateef et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Article Energy & Fuels

Sebacic acid/CNT sponge phase change material with excellent thermal conductivity and photo-thermal performance

Qi Zhang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Add to Collection

Article Energy & Fuels

Experimental demonstration of a dispatchable latent heat storage system with aluminum-silicon as a phase change material

Jonathan E. Rea et al.

APPLIED ENERGY (2018)

Add to Collection

Review Chemistry, Physical

Polydopamine-inspired nanomaterials for energy conversion and storage

Konggang Qu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Energy & Fuels

Estimation of thermal performance and design optimization of finned multitube latent heat thermal energy storage

Kunal Bhagat et al.

JOURNAL OF ENERGY STORAGE (2018)

Add to Collection

Article Automation & Control Systems

Structural design of groove and micro-blade of the end mill in aluminum alloys machining based on bionics

Zhenxi Jiang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Thermodynamics

Topology optimization for heat transfer enhancement in Latent Heat Thermal Energy Storage

Alberto Pizzolato et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Modeling and investigation of high temperature phase change materials (PCM) in different storage tank configurations

Moein Dadollahi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Multidisciplinary Sciences

An electric-eel-inspired soft power source from stacked hydrogels

Thomas B. H. Schroeder et al.

NATURE (2017)

Add to Collection

Review Green & Sustainable Science & Technology

Thermal energy storage systems for concentrated solar power plants

Ugo Pelay et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Review Green & Sustainable Science & Technology

Thermal energy storage materials and systems for solar energy applications

Guruprasad Alva et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Review Chemistry, Physical

Diatom silica, an emerging biomaterial for energy conversion and storage

Xiao Wen Sun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Bioinspired stretchable triboelectric nanogenerator as energy-harvesting skin for self-powered electronics

Xiaofeng Wang et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Smart Bioinspired Nanochannels and their Applications in Energy-Conversion Systems

Ruirui Li et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Energy & Fuels

Design of effective fins for fast PCM melting and solidification in shell-and-tube latent heat thermal energy storage through topology optimization

Alberto Pizzolato et al.

APPLIED ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Tree-Inspired Design for High-Efficiency Water Extraction

Mingwei Zhu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Stretchable Tactile Sensors

Shuang-Zhuang Guo et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Thermodynamics

Thermal performance analysis of a novel PCM capsule in red blood cell shape

Xiwen Cheng et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Energy & Fuels

Energetic evaluation of thermal energy storage options for high efficiency solar cooling systems

Sergio Pintaldi et al.

APPLIED ENERGY (2017)

Add to Collection

Article Thermodynamics

Numerical analysis of discharging process acceleration in LHTESS by immersing innovative fin configuration using finite element method

Mohsen Sheikholeslami et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Performance analysis of a solar air heating system with latent heat storage in a lightweight building

Ciril Arkar et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Parametric investigations to enhance thermal performance of paraffin through a novel geometrical configuration of shell and tube latent thermal storage system

Zakir Khan et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Review Thermodynamics

A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility

Zakir Khan et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Article Engineering, Chemical

Response surface method optimization of innovative fin structure for expediting discharging process in latent heat thermal energy storage system containing nano-enhanced phase change material

Mohsen Sheikholeslami et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

3D printed bionic nanodevices

Yong Lin Kong et al.

NANO TODAY (2016)

Add to Collection

Article Chemistry, Physical

Novel photodriven composite phase change materials with bioinspired modification of BN for solar-thermal energy conversion and storage

Jie Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Bio-inspired sensors based on photonic structures of Morpho butterfly wings: a review

Qingsong Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Add to Collection

Article Engineering, Multidisciplinary

Industry 5.0-The Relevance and Implications of Bionics and Synthetic Biology

Peter Sachsenmeier

ENGINEERING (2016)

Add to Collection

Article Energy & Fuels

Experimental investigation of latent heat storage in a coil in PCM storage unit

Abdel Illah Nabil Korti et al.

JOURNAL OF ENERGY STORAGE (2016)

Add to Collection

Article Energy & Fuels

Maximization of performance of a PCM latent heat storage system with innovative fins

A. Sciacovelli et al.

APPLIED ENERGY (2015)

Add to Collection

Article Thermodynamics

Numerical investigation of heat transfer mechanism in a vertical shell and tube latent heat energy storage system

Saeid Seddegh et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Characterization and thermal performance of nitrate mixture/SiC ceramic honeycomb composite phase change materials for thermal energy storage

Yong Li et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Numerical and experimental study of heat transfer characteristics of a shell-tube latent heat storage system: Part I - Charging process

X. Xiao et al.

ENERGY (2015)

Add to Collection

Article Thermodynamics

Studies on the effect of shape-stabilized PCM filled aluminum honeycomb composite material on thermal control

Biao Xie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Mass transfer and reaction in methanol steam reforming reactor with fractal tree-like microchannel network

Yongping Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Review Green & Sustainable Science & Technology

The latest advancements on thermochemical heat storage systems

Devrim Aydin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Add to Collection

Article Engineering, Environmental

Bionic cactus-like titanium oxide microspheres and its smart electrorheological activity

Zhaobo Wang et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Construction & Building Technology

Thermal performance of an aluminum honeycomb wallboard incorporating microencapsulated PCM

Chi-ming Lai et al.

ENERGY AND BUILDINGS (2014)

Add to Collection

Article Chemistry, Physical

Creating electrochemical gradients by light: from bio-inspired concepts to photoelectric conversion

Xiaojiang Xie et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Review Energy & Fuels

A review of solar collectors and thermal energy storage in solar thermal applications

Y. Tian et al.

APPLIED ENERGY (2013)

Add to Collection

Article Thermodynamics

Hydrogen production by methanol steam reforming in a disc microreactor with tree-shaped flow architectures

Feng Yao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Electro- and Photodriven Phase Change Composites Based on Wax-Infiltrated Carbon Nanotube Sponges

Liangjie Chen et al.

ACS NANO (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Bioinspired Morphogenesis of Highly Intricate and Symmetric Silica Nanostructures

Jaeseok Yi et al.

NANO LETTERS (2012)

Add to Collection

Article Construction & Building Technology

Realization, test and modelling of honeycomb wallboards containing a Phase Change Material

Colas Hasse et al.

ENERGY AND BUILDINGS (2011)

Add to Collection

Review Materials Science, Biomaterials

Energy absorbent natural materials and bioinspired design strategies: A review

J. McKittrick et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)

Add to Collection

Review Green & Sustainable Science & Technology

Solar water heaters with phase change material thermal energy storage medium: A review

Anant Shukla et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

Add to Collection

Review Green & Sustainable Science & Technology

Performance enhancement in latent heat thermal storage system: A review

S. Jegadheeswaran et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

Add to Collection

Article Thermodynamics

Thermal energy storage performance of paraffin in a novel tube-in-shell system

Mithat Akgun et al.

APPLIED THERMAL ENGINEERING (2008)

Add to Collection

Article Thermodynamics

Numerical analysis of latent heat thermal energy storage system

N. R. Vyshak et al.

ENERGY CONVERSION AND MANAGEMENT (2007)

Add to Collection

Article Thermodynamics

Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unit

Anica Trp et al.

APPLIED THERMAL ENGINEERING (2006)

Add to Collection

Article Medicine, Research & Experimental

The human erythrocyte has developed the biconcave disc shape to optimise the flow properties of the blood in the large vessels

Chika Uzoigwe

MEDICAL HYPOTHESES (2006)

Add to Collection

Article Energy & Fuels

Experimental and numerical investigation of thermal energy storage with a finned tube

A Erek et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2005)

Add to Collection

Article Energy & Fuels

An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit

A Trp

SOLAR ENERGY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.