☆ 4.7 Article

Mission reliability-driven risk-based predictive maintenance approach of multistate manufacturing system

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Industrial

Multiple degradation-driven preventive maintenance policy for serial-parallel multi-station manufacturing systems

Yaping Li et al.

Summary: This paper proposes a multiple degradation-driven preventive maintenance (MDPM) policy for serial-parallel multi-station manufacturing systems (SMMS), considering the impact of production rate degradation and machine reliability degradation on system capacity. By maximizing capacity efficiency and minimizing cost rate, a station-level preventive maintenance optimization model is proposed. The scheduling process of MDPM is formulated with three suggested rules for system-level decision making.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

Add to Collection

Review Engineering, Industrial

Big data analytics for intelligent manufacturing systems: A review

Junliang Wang et al.

Summary: This paper provides a comprehensive review of big data analytics (BDA) for intelligent manufacturing systems, covering the concepts, methodologies, and applications. BDA has shown great potential in improving the efficiency and outcomes of product design, manufacturing, and maintenance. However, there are still challenges and opportunities that need further research and exploration.

JOURNAL OF MANUFACTURING SYSTEMS (2022)

Add to Collection

Article Engineering, Industrial

A deep learning predictive model for selective maintenance optimization

Hadis Hesabi et al.

Summary: This paper introduces a predictive selective maintenance framework for multi-component systems using deep learning and mathematical programming. The framework accurately predicts the health condition of each component and selects maintenance actions accordingly. The performance of the framework is validated using a benchmarking data set provided by NASA.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Artificial-intelligence-based maintenance decision-making and optimization for multi-state component systems

Van-Thai Nguyen et al.

Summary: In this paper, an artificial intelligence-based maintenance approach is proposed, which uses artificial neural network for predicting maintenance cost at system level and employs deep reinforcement learning algorithm for optimizing maintenance decisions. The experimental results demonstrate the effectiveness of this approach in maintenance cost forecasting and decision optimization.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Integrated predictive maintenance approach for multistate manufacturing system considering geometric and non-geometric defects of products

Yao Li et al.

Summary: This paper proposes a novel integrated predictive maintenance (PdM) strategy to improve the performance of manufacturing systems. By elucidating the influence of product defects on system performance, analyzing defect mechanisms, and evaluating maintenance investment and economic losses, an optimal maintenance strategy is proposed.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Optimizing a condition-based maintenance policy by taking the preferences of a risk-averse decision maker into account

Tom Ivar Pedersen et al.

Summary: Reasonably accurate RUL predictions can assist in formulating maintenance policies and acquiring resources based on predicted needs, but may also increase the risk of long downtime and substantial losses. Decision makers' financial risk tolerance should be taken into account when optimizing the challenge.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Different costs-informed component preventive maintenance with system lifetime changes

Hongyan Dui et al.

Summary: System safety assessment is a technique that identifies hazards and ensures compliance with safety requirements. This paper proposes preventive maintenance measures for components based on maintenance effectiveness and investigates expected costs due to components and the system. Different maintenance cost scenarios are analyzed, and optimal components for preventive maintenance are selected considering cost and maintenance constraints.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Integrated mission reliability modeling based on extended quality state task network for intelligent multistate manufacturing systems

Xiuzhen Yang et al.

Summary: This paper proposes a novel integrated mission reliability modeling approach based on EQSTN for intelligent multistate manufacturing systems, aiming to ensure the reliability of the final produced products and quantify the operational healthy state of the intelligent manufacturing system.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Energy & Fuels

Multi-state Risk-Based Maintenance Analysis of Redundant Safety Systems Using the Markov Model and Fault Tree Method

F. Mohammadhasani et al.

Summary: The study focuses on the risk-based maintenance strategy in the safe operation of nuclear power plants, using Markov maintenance models to quantify the effects of maintenance activities on component unavailability. By coupling these models with the fault tree method, the risk measure is upgraded from the component level to the system level, showing that the Markov method is effective in the conservative evaluation of risk measures. This approach integrates maintenance strategies and components degradation, providing a practical and accurate tool for determining the technical specification of a real nuclear power plant from a risk perspective.

FRONTIERS IN ENERGY RESEARCH (2021)

Add to Collection

Article Engineering, Industrial

Joint production and preventive maintenance controls for unreliable and imperfect manufacturing systems

Abdessamad Ait El Cadi et al.

Summary: The study presents an efficient stochastic analytical model for integrated production and preventive maintenance control in manufacturing systems. It aims to jointly optimize production and maintenance control settings by minimizing total incurred cost, evaluating model quality, and deriving relevant insights and issues.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Add to Collection

Article Engineering, Industrial

An Intelligent Health diagnosis and Maintenance Decision-making approach in Smart Manufacturing

Guibing Gao et al.

Summary: The method utilizes the vulnerability of equipment to conduct health diagnosis strategies, assisting maintenance personnel in accurately diagnosing equipment health and promptly implementing maintenance plans.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Industrial

One-batch preempt deterioration-effect multi-state multi-rework network reliability problem and algorithms

Zhifeng Hao et al.

Summary: A rework network is a distinct multi-state network used for fixing defective products and improving the utility and productivity of industrial manufacturing systems. A novel one-batch preempt multi-state multi-rework network model and algorithm based on binary addition tree algorithms have been proposed to calculate rework reliability effectively and have been applied to multiple rework problems successfully.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Reliability evaluation for multi-state manufacturing systems with quality-reliability dependency

Zhaoxiang Chen et al.

Summary: This paper introduces a reliability evaluation method for multi-state manufacturing systems that considers quality-reliability dependency, focusing on two main characteristics: quality deviation and production rhythm. By constructing a model to describe interactions among components in the manufacturing system, the proposed method aims to quantify the impact of this dependency.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

A data-driven predictive maintenance strategy based on accurate failure prognostics

Chuang Chen et al.

Summary: This paper presents a novel data-driven predictive maintenance strategy that achieves accurate failure prognosis through degradation feature selection and degradation prognostic modeling modules, outperforming traditional maintenance strategies.

EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY (2021)

Add to Collection

Article Automation & Control Systems

Early Change Detection in Dynamical Bearing Degradation Process Based on Hierarchical Graph Model and Adaptive Inputs Weighting Fusion

Shaohua Yang et al.

Summary: Early detection of changes from normal to abnormal in the dynamical degradation process is crucial for enhancing the function of bearings over their long-term service time. A new method based on hierarchical graph model (HGM) coupled with adaptive inputs weighting (AIW) fusion is proposed in this article, demonstrating its effectiveness and potential through experiments and comparisons with benchmarking methods.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Add to Collection

Article Engineering, Industrial

Remaining useful life prediction and predictive maintenance strategies for multi-state manufacturing systems considering functional dependence

Xiao Han et al.

Summary: This article discusses the importance of performance and product quality states of manufacturing systems for operational evaluation and maintenance decisions of multi-state systems. It proposes a system predictive maintenance method based on functional importance, and the effectiveness of this method is demonstrated through case results.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Intelligent Manufacturing for the Process Industry Driven by Industrial Artificial Intelligence

Tao Yang et al.

Summary: This paper proposes a new mode of intelligent manufacturing for the process industry, which involves the deep integration of industrial artificial intelligence and the Industrial Internet. It analyzes the existing three-tier structure and decision-making processes of the process industry, describes the significance of an intelligent manufacturing framework, and envisions intelligent optimal decision-making and autonomous control systems in the future.

ENGINEERING (2021)

Add to Collection

Article Engineering, Industrial

Big data and stream processing platforms for Industry 4.0 requirements mapping for a predictive maintenance use case

Radhya Sahal et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

Add to Collection

Article Engineering, Manufacturing

Intelligent Maintenance Systems and Predictive Manufacturing

Jay Lee et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Computer Science, Hardware & Architecture

Mission Reliability Evaluation for Fuzzy Multistate Manufacturing System Based on an Extended Stochastic Flow Network

Yihai He et al.

IEEE TRANSACTIONS ON RELIABILITY (2020)

Add to Collection

Article Management

Risk-based quality accident ranking approach using failure mechanism and Axiomatic domain mapping

Yihai He et al.

TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE (2020)

Add to Collection

Article Computer Science, Information Systems

Dynamic Modeling Method of Mission Reliability of a Multi-State Manufacturing System With Multiple Production Lines

Yijing Zhang et al.

IEEE ACCESS (2020)

Add to Collection

Article Energy & Fuels

Risk Based Maintenance in the Hydroelectric Power Plants

Evrencan Ozcan et al.

ENERGIES (2019)

Add to Collection

Review Computer Science, Interdisciplinary Applications

A systematic literature review of machine learning methods applied to predictive maintenance

Thyago P. Carvalho et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2019)

Add to Collection

Article Computer Science, Information Systems

Mission Reliability-Oriented Selective Maintenance Optimization for Intelligent Multistate Manufacturing Systems With Uncertain Maintenance Quality

Zhaoxiang Chen et al.

IEEE ACCESS (2019)

Add to Collection

Article Engineering, Industrial

Integrated predictive maintenance strategy for manufacturing systems by combining quality control and mission reliability analysis

Yihai He et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)

Add to Collection

Article Engineering, Industrial

System reliability for a multi-state manufacturing network with joint buffer stations

Ping-Chen Chang et al.

JOURNAL OF MANUFACTURING SYSTEMS (2017)

Add to Collection

Review Engineering, Industrial

A review on condition-based maintenance optimization models for stochastically deteriorating system

Suzan Alaswad et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Add to Collection

Article Management

Maintenance strategy selection and its impact in maintenance function A conceptual framework

R. S. Velmurugan et al.

INTERNATIONAL JOURNAL OF OPERATIONS & PRODUCTION MANAGEMENT (2015)

Add to Collection

Article Automation & Control Systems

Single-machine-based predictive maintenance model considering intelligent machinery prognostics

Wenzhu Liao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Engineering, Environmental

Risk-based maintenance of ethylene oxide production facilities

FI Khan et al.

JOURNAL OF HAZARDOUS MATERIALS (2004)

Add to Collection

Article Engineering, Chemical

Risk-based maintenance (RBM): a quantitative approach for maintenance/inspection scheduling and planning

FI Khan et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.