Related references
Note: Only part of the references are listed.Application of high-pressure technology in exploring mechanical properties of high-entropy alloys
Shu-Cong Li et al.
TUNGSTEN (2023)
Review of recent technologies for transforming carbon dioxide to carbon materials
Jae Hyun Park et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion
Chuyi Duan et al.
CONTINUUM MECHANICS AND THERMODYNAMICS (2022)
Microstructure and microhardness of dual-phase high-entropy alloy by high-pressure torsion: Twins and stacking faults in FCC and dislocations in BCC
Payam Edalati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Effect of Homogenization on Microstructure and Hardness of Arc-Melted FeCoNiMn High Entropy Alloy During High-Pressure Torsion (HPT)
Fatemeh Alijani et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)
Excellent thermal stability and mechanical properties of bulk nanostructured FeCoNiCu high entropy alloy
Yitan Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Recent Progress in Our Understanding of Phase Stability, Atomic Structures and Mechanical and Functional Properties of High-Entropy Alloys
Haruyuki Inui et al.
MATERIALS TRANSACTIONS (2022)
Corrosion Behavior of Ultrafine-Grained CoCrFeMnNi High-Entropy Alloys Fabricated by High-Pressure Torsion
Haruka Shimizu et al.
MATERIALS (2022)
Severe Plastic Deformation and Phase Transformations in High Entropy Alloys: A Review
Boris B. Straumal et al.
CRYSTALS (2022)
Nanomaterials by severe plastic deformation: review of historical developments and recent advances
Kaveh Edalati et al.
MATERIALS RESEARCH LETTERS (2022)
Effects of solutes on thermal stability, microstructure and mechanical properties in CrMnFeCoNi based alloys after high pressure torsion
Tom Keil et al.
ACTA MATERIALIA (2022)
Using Severe Plastic Deformation to Produce Nanostructured Materials with Superior Properties
Ruslan Z. Valiev et al.
ANNUAL REVIEW OF MATERIALS RESEARCH (2022)
Defective high-entropy oxide photocatalyst with high activity for CO2 conversion
Saeid Akrami et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2022)
Gradient-structured high-entropy alloy with improved combination of strength and hydrogen embrittlement resistance
Abbas Mohammadi et al.
CORROSION SCIENCE (2022)
Thermal stability of nanocrystalline CoCrFeNi multi-principal element alloy: Effect of the degree of severe plastic deformation
Megumi Kawasaki et al.
INTERMETALLICS (2022)
Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion
Avanish Kumar Chandan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Microstructure and defect effects on strength and hydrogen embrittlement of high-entropy alloy CrMnFeCoNi processed by high-pressure torsion
Abbas Mohammadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
High thermal stability of nanocrystalline FeNi2CoMo0.2V0.5 high-entropy alloy by twin boundary and sluggish diffusion
N. N. Liang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis
Ajay Kumar et al.
SMALL (2022)
Decoupling the roles of constituent phases in the strengthening of hydrogenated nanocrystalline dual-phase high-entropy alloys
Zhe Gao et al.
SCRIPTA MATERIALIA (2022)
High-entropy alloys as anode materials of nickel - metal hydride batteries
Parisa Edalati et al.
SCRIPTA MATERIALIA (2022)
Superlative room temperature and cryogenic tensile properties of nanostructured CoCrFeNi medium-entropy alloy fabricated by powder high-pressure torsion
Sujung Son et al.
SCRIPTA MATERIALIA (2022)
Visible-light photocatalytic oxygen production on a high-entropy oxide by multiple-heterojunction introduction
Parisa Edalati et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2022)
Enhanced CO2 conversion on highly-strained and oxygen-deficient BiVO4 photocatalyst
Saeid Akrami et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Relation of phase fraction to superplastic behavior of multi-principal element alloy with a multi-phase structure
Nhung Thi-Cam Nguyen et al.
SCRIPTA MATERIALIA (2022)
Structure and low-temperature micromechanical properties of as-cast and SPD-processed high-entropy Co25-xCr25Fe25Ni25Cx alloys
A. V. Levenets et al.
LOW TEMPERATURE PHYSICS (2022)
Ultrafast severe plastic deformation in high-entropy alloy Al0.1CoCrFeNi via dynamic equal channel angular pressing
Y. L. Bian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
High-entropy hydrides for fast and reversible hydrogen storage at room temperature: Binding-energy engineering via first-principles calculations and experiments
Abbas Mohammadi et al.
ACTA MATERIALIA (2022)
Differential superplasticity in a multi-phase multi-principal element alloy by initial annealing
Nhung Thi-Cam Nguyen et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Significant CO2 photoreduction on a high-entropy oxynitride
Saeid Akrami et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Magnesium- and intermetallic alloys-based hydrides for energy storage: modelling, synthesis and properties
Luca Pasquini et al.
PROGRESS IN ENERGY (2022)
Entropy-stabilized metal-CeOxsolid solutions for catalytic combustion of volatile organic compounds
Yuan Shu et al.
AICHE JOURNAL (2021)
High-pressure TiO2-II polymorph as an active photocatalyst for CO2 to CO conversion
Saeid Akrami et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2021)
Microstructure evolution in a nanocrystalline CoCrFeNi multi-principal element alloy during annealing
Pham Tran Hung et al.
MATERIALS CHARACTERIZATION (2021)
Unusual strain-induced martensite and absence of conventional grain refinement in twinning induced plasticity high-entropy alloy processed by high-pressure torsion
Praveen Sathiyamoorthi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
A powder-metallurgy-based fabrication route towards achieving high tensile strength with ultra-high ductility in high-entropy alloy
Peyman Asghari-Rad et al.
SCRIPTA MATERIALIA (2021)
Ultrahigh hardness in nanostructured dual-phase high-entropy alloy AlCrFeCoNiNb developed by high-pressure torsion
Payam Edalati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure
S. Picak et al.
ACTA MATERIALIA (2021)
TiC-reinforced CoCrFeMnNi composite processed by cold-consolidation and subsequent annealing
Peyman Asghari-Rad et al.
MATERIALS LETTERS (2021)
Phase transformation and microstructure evolution in ultrahard carbon-doped AlTiFeCoNi high-entropy alloy by high-pressure torsion
Parisa Edalati et al.
MATERIALS LETTERS (2021)
High-Pressure Torsion of Non-Equilibrium Hydrogen Storage Materials: A Review
Adam Revesz et al.
ENERGIES (2021)
High-entropy ceramics: Review of principles, production and applications
Saeid Akrami et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Low temperature micromechanical properties of nanocrystalline CoCrFeNiMn high entropy alloy
H. Rusakova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy
Wenrui Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Commercialization of bulk nanostructured metals and alloys
Terry C. Lowe et al.
MRS BULLETIN (2021)
From diluted solid solutions to high entropy alloys: Saturation grain size and mechanical properties after high pressure torsion
Tom Keil et al.
SCRIPTA MATERIALIA (2021)
High entropy alloy nanocomposites produced by high pressure torsion
Shabnam Taheriniya et al.
ACTA MATERIALIA (2021)
Architectured multi-metal CoCrFeMnNi-Inconel 718 lamellar composite by high-pressure torsion
G. M. Karthik et al.
SCRIPTA MATERIALIA (2021)
High-entropy materials for catalysis: A new frontier
Yifan Sun et al.
SCIENCE ADVANCES (2021)
Synergetic strengthening from grain refinement and nano-scale precipitates in non-equiatomic CoCrFeNiMo medium-entropy alloy
Hyeonseok Kwon et al.
INTERMETALLICS (2021)
Evidence for a phase transition in an AlCrFe2Ni2 high entropy alloy processed by high-pressure torsion
Xiaotao Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing
A. K. Chandan et al.
MATERIALS CHARACTERIZATION (2021)
Synthesis of biocompatible high-entropy alloy TiNbZrTaHf by high-pressure torsion
Jeimmy Gonzalez-Masis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Simultaneous deformation twinning and martensitic transformation in CoCrFeMnNi high entropy alloy at high temperatures
S. Picak et al.
SCRIPTA MATERIALIA (2021)
High-Pressure Torsion for Synthesis of High-Entropy Alloys
Kaveh Edalati et al.
METALS (2021)
Hydrogen storage properties of new A3B2-type TiZrNbCrFe high-entropy alloy
Ricardo Floriano et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Influence of carbon on the mechanical behavior and microstructure evolution of CoCrFeMnNi processed by high pressure torsion
Yemao Lu et al.
MATERIALIA (2021)
Effect of Initial Grain Size on Deformation Mechanism during High-Pressure Torsion in V10Cr15Mn5Fe35Co10Ni25 High-Entropy Alloy
Peyman Asghari-Rad et al.
ADVANCED ENGINEERING MATERIALS (2020)
Anomalous Evolution of Strength and Microstructure of High-Entropy Alloy CoCrFeNiMn after High-Pressure Torsion at 300 and 77 K
Aleksey V. Podolskiy et al.
ADVANCED ENGINEERING MATERIALS (2020)
Mechanical Synthesis and Hydrogen Storage Characterization of MgVCr and MgVTiCrFe High-Entropy Alloy
Marcelo Orpinelli de Marco et al.
ADVANCED ENGINEERING MATERIALS (2020)
Multi-component nanoporous alloy/(oxy)hydroxide for bifunctional oxygen electrocatalysis and rechargeable Zn-air batteries
Gang Fang et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2020)
Room-Temperature Synthesis of High-Entropy Perovskite Oxide Nanoparticle Catalysts through Ultrasonication-Based Method
Francis Okejiri et al.
CHEMSUSCHEM (2020)
Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe41Mn25Ni24Co8Cr2 high entropy alloy
H. T. Jeong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Hydrogen diffusivity and interaction with Fe20Mn20Ni20Co20Cr20 and Fe22Mn40Ni30Co6Cr2 high-entropy alloys
J. S. Belo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Design and fabrication of Ti-Zr-Hf-Cr-Mo and Ti-Zr-Hf-Co-Cr-Mo high-entropy alloys as metallic biomaterials
Takeshi Nagase et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Fine-tuning of mechanical properties in V10Cr15Mn5Fe35Co10Ni25 high-entropy alloy through high-pressure torsion and annealing
Peyman Asghari-Rad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A critical evaluation of microstructure-texture-mechanical behavior heterogeneity in high pressure torsion processed CoCuFeMnNi high entropy alloy
Reshma Sonkusare et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Reversible room temperature hydrogen storage in high-entropy alloy TiZrCrMnFeNi
Parisa Edalati et al.
SCRIPTA MATERIALIA (2020)
Rational Design and Characterization of Direct Z-Scheme Photocatalyst for Overall Water Splitting from Excited State Dynamics Simulations
Xianghong Niu et al.
ACS CATALYSIS (2020)
High-entropy ceramics
Corey Oses et al.
NATURE REVIEWS MATERIALS (2020)
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
E. P. George et al.
ACTA MATERIALIA (2020)
Effect of grain size on the strain rate sensitivity of CoCrFeNi high-entropy alloy
Yakai Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
Werner Skrotzki et al.
CRYSTALS (2020)
Toward Ambitious Multiscale Modeling of Nanocrystal Catalysts for Water Splitting
Michele Pavone et al.
ACS ENERGY LETTERS (2020)
Materials for hydrogen-based energy storage - past, recent progress and future outlook
Michael Hirscher et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Visible-Light Photocurrent in Nanostructured High-Pressure TiO2-II (Columbite) Phase
Qing Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2020)
Ultrahigh hardness and biocompatibility of high-entropy alloy TiAlFeCoNi processed by high-pressure torsion
Parisa Edalati et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Entropy-stabilized single-atom Pd catalysts via high-entropy fluorite oxide supports
Haidi Xu et al.
NATURE COMMUNICATIONS (2020)
Hydrogen storage in TiZrNbFeNi high entropy alloys, designed by thermodynamic calculations
Ricardo Floriano et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Thermal stability of a nanocrystalline HfNbTiZr multi-principal element alloy processed by high-pressure torsion
Pham Tran Hung et al.
MATERIALS CHARACTERIZATION (2020)
Novel black bismuth oxide (Bi2O3) with enhanced photocurrent generation, produced by high-pressure torsion straining
Ikuro Fujita et al.
SCRIPTA MATERIALIA (2020)
Designing (Ultra)Fine-Grained High-Entropy Alloys by Spark Plasma Sintering and Equal-Channel Angular Pressing
Lisa-Marie Rymer et al.
CRYSTALS (2020)
Severe Plastic Deformation for Nanostructure Controls
Zenji Horita et al.
MATERIALS TRANSACTIONS (2020)
An ultrastable heterostructured oxide catalyst based on high-entropy materials: A new strategy toward catalyst stabilization via synergistic interfacial interaction
Hao Chen et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2020)
Photocatalytic hydrogen evolution on a high-entropy oxide
Parisa Edalati et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
High Entropy Intermetallic-Oxide Core-Shell Nanostructure as Superb Oxygen Evolution Reaction Catalyst
Zhaoyi Ding et al.
ADVANCED SUSTAINABLE SYSTEMS (2020)
Biological behavior of titanium processed by severe plastic deformation
Dorota Kubacka et al.
APPLIED SURFACE SCIENCE (2019)
Application of hydrides in hydrogen storage and compression: Achievements, outlook and perspectives
Jose Bellosta von Colbe et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy
Reshma Sonkusare et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
B. Schuh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Formation, structure and properties of biocompatible TiZrHfNbTa high-entropy alloys
Yuan Yuan et al.
MATERIALS RESEARCH LETTERS (2019)
Shear driven formation of nano-diamonds at sub-gigapascals and 300 K
Yang Gao et al.
CARBON (2019)
Nanoindentation Creep Behavior of CoCrFeNiMn High-Entropy Alloy under Different High-Pressure Torsion Deformations
P. F. Zhou et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion
Milos B. Djukic et al.
ENGINEERING FRACTURE MECHANICS (2019)
Evolution of microstructure and hardness in Hf25Nb25Ti25Zr25 high-entropy alloy during high-pressure torsion
Jeno Gubicza et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Special Issue on Severe Plastic Deformation for Nanomaterials with Advanced Functionality PREFACE
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2019)
Grain Refinement of AZ31 and AZ61 Mg Alloys through Room Temperature Processing by UP-Scaled High-Pressure Torsion
Takahiro Masuda et al.
MATERIALS TRANSACTIONS (2019)
Severe Plastic Deformation of Amorphous Alloys
Adam Revesz et al.
MATERIALS TRANSACTIONS (2019)
Severe Plastic Deformation of Polymers
V. Beloshenko et al.
MATERIALS TRANSACTIONS (2019)
Finite Element Modelling of High-Pressure Torsion: An Overview
Pedro Henrique R. Pereira et al.
MATERIALS TRANSACTIONS (2019)
Developing Nanostructured Metals for Manufacturing of Medical Implants with Improved Design and Biofunctionality
Ruslan Z. Valiev et al.
MATERIALS TRANSACTIONS (2019)
Severe Plastic Deformation to Achieve High Strength and High Ductility in Fe-Ni Based Alloys with Lattice Softening
Shigeru Kuramoto et al.
MATERIALS TRANSACTIONS (2019)
Severe Plastic Deformation of Semiconductor Materials Using High-Pressure Torsion
Yoshifumi Ikoma
MATERIALS TRANSACTIONS (2019)
High-Pressure Phase Transformations under Severe Plastic Deformation by Torsion in Rotational Anvils
Valery I. Levitas
MATERIALS TRANSACTIONS (2019)
Corrosion Behavior of Severely Deformed Pure and Single-Phase Materials
Hiroyuki Miyamoto et al.
MATERIALS TRANSACTIONS (2019)
High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
Andrea Bachmaier et al.
MATERIALS TRANSACTIONS (2019)
An Overview on the Continuous Severe Plastic Deformation Methods
Ghader Faraji et al.
MATERIALS TRANSACTIONS (2019)
Recent Developments in the Application of Surface Mechanical Attrition Treatments for Improved Gradient Structures: Processing Parameters and Surface Reactivity
Thierry Grosdidier et al.
MATERIALS TRANSACTIONS (2019)
Grain Boundaries and Diffusion Phenomena in Severely Deformed Materials
Gerhard Wilde et al.
MATERIALS TRANSACTIONS (2019)
High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review
Laszlo S. Toth et al.
MATERIALS TRANSACTIONS (2019)
Behavior of Nb and Cu-Nb Composites under Severe Plastic Deformation and Annealing
V. V. Popov et al.
MATERIALS TRANSACTIONS (2019)
Bulk-State Reactions and Improving the Mechanical Properties of Metals through High-Pressure Torsion
Jae-Kyung Han et al.
MATERIALS TRANSACTIONS (2019)
The Contribution of Severe Plastic Deformation to Research on Superplasticity
Megumi Kawasaki et al.
MATERIALS TRANSACTIONS (2019)
Room Temperature Superplaticity in Fine/Ultrafine Grained Materials Subjected to Severe Plastic Deformation
M. Demirtas et al.
MATERIALS TRANSACTIONS (2019)
Development of Metal Oxide High-Pressure Phases for Photocatalytic Properties by Severe Plastic Deformation
Hadi Razavi-Khosroshahi et al.
MATERIALS TRANSACTIONS (2019)
Metallurgical Alchemy by Ultra-Severe Plastic Deformation via High-Pressure Torsion Process
Kaveh Edalati
MATERIALS TRANSACTIONS (2019)
Comparisons of Microstructures and Mechanical Properties of Heterogeneous Nano-Structure Induced by Heavy Cold Rolling and Ultrafine-Grained Structure by Multi-Directional Forging of Cu-Al Alloy
Hiromi Miura et al.
MATERIALS TRANSACTIONS (2019)
Strain Induced Segregations in Severely Deformed Materials
Xavier Sauvage et al.
MATERIALS TRANSACTIONS (2019)
Deformation Heterogeneities in Equal Channel Angular Pressing
Werner Skrotzki
MATERIALS TRANSACTIONS (2019)
Critical Temperature in Bulk Ultrafine-Grained Superconductors of Nb, V, and Ta Processed by High-Pressure Torsion
Terukazu Nishizaki et al.
MATERIALS TRANSACTIONS (2019)
Lattice Defects and Their Influence on the Mechanical Properties of Bulk Materials Processed by Severe Plastic Deformation
Jeno Gubicza
MATERIALS TRANSACTIONS (2019)
Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
O. Renk et al.
MATERIALS TRANSACTIONS (2019)
A Comparative Study of Hardness in Nanostructured Cu-Zn, Cu-Si and Cu-Ni Solid-Solution Alloys Processed by Severe Plastic Deformation
Takahiro Kunimine et al.
MATERIALS TRANSACTIONS (2019)
Hydrostatic Compression Effects on Fifth-Group Element Superconductors V, Nb, and Ta Subjected to High-Pressure Torsion
Masaki Mito et al.
MATERIALS TRANSACTIONS (2019)
Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys
Nobuhiro Tsuji et al.
MATERIALS TRANSACTIONS (2019)
Hydrogen Storage in Mg and Mg-Based Alloys and Composites Processed by Severe Plastic Deformation
D. R. Leiva et al.
MATERIALS TRANSACTIONS (2019)
Historical Studies by Polish Scientist on Ultrafine-Grained Materials by Severe Plastic Deformation
Krzysztof Bryla et al.
MATERIALS TRANSACTIONS (2019)
The Effect of Severe Plastic Deformations on Phase Transitions and Structure of Solids
Vladimir D. Blank et al.
MATERIALS TRANSACTIONS (2019)
Progress in Mechanical Properties of Gradient Structured Metallic Materials Induced by Surface Mechanical Attrition Treatment
Xu Yang et al.
MATERIALS TRANSACTIONS (2019)
Texture Evolution in Severe Plastic Deformation Processes
Satyam Suwas et al.
MATERIALS TRANSACTIONS (2019)
The Characteristics of Creep in Metallic Materials Processed by Severe Plastic Deformation
Petr Kral et al.
MATERIALS TRANSACTIONS (2019)
Phase Transformations Induced by Severe Plastic Deformation
Andrey Mazilkin et al.
MATERIALS TRANSACTIONS (2019)
Effect of Cold Rolling on Metal Hydrides
Jacques Huot et al.
MATERIALS TRANSACTIONS (2019)
The Development of Vacancies during Severe Plastic Deformation
J. Cizek et al.
MATERIALS TRANSACTIONS (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
High Entropy Oxides-A Cost-Effective Catalyst for the Growth of High Yield Carbon Nanotubes and Their Energy Applications
Mamta Sham Lal et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Influence of severe plastic deformation on the microstructure and hardness of a CoCrFeNi high-entropy alloy: A comparison with CoCrFeNiMn
Jeno Gubicza et al.
MATERIALS CHARACTERIZATION (2019)
Superplasticity of V10Cr15Mn5Fe35Co10Ni25 high-entropy alloy processed using high-pressure torsion
Nhung Thi-Cam Nguyen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Radiation Tolerance of Ultrafine-Grained Materials Fabricated by Severe Plastic Deformation
Nariman A. Enikeev et al.
MATERIALS TRANSACTIONS (2019)
The Effect of Severe Plastic Deformation on Thermoelectric Performance of Skutterudites, Half-Heuslers and Bi-Tellurides
Gerda Rogl et al.
MATERIALS TRANSACTIONS (2019)
Anisotropy of Tensile and Fracture Behavior of Pure Titanium after Hydrostatic Extrusion
E. C. Moreno-Valle et al.
MATERIALS TRANSACTIONS (2019)
Microstructural, mechanical and electrochemical characterization of TiZrTaHfNb and Ti1.5ZrTa0.5Hf0.5Nb0.5 refractory high-entropy alloys for biomedical applications
Amir Motallebzadeh et al.
INTERMETALLICS (2019)
Development of non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials
Takao Hori et al.
SCRIPTA MATERIALIA (2019)
Mechanochemistry of Metal Hydrides: Recent Advances
Jacques Huot et al.
MATERIALS (2019)
Microstructure Optimization of Mg-Alloys by the ECAP Process Including Numerical Simulation, SPD Treatments, Characterization, and Hydrogen Sorption Properties
Nataliya Skryabina et al.
MOLECULES (2019)
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Zezhou Li et al.
PROGRESS IN MATERIALS SCIENCE (2019)
High-pressure torsion driven mechanical alloying of CoCrFeMnNi high entropy alloy
A. Kilmametov et al.
SCRIPTA MATERIALIA (2019)
Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials
May L. Martin et al.
ACTA MATERIALIA (2019)
Phase stability and mechanical properties of novel high entropy transition metal carbides
Tyler J. Harrington et al.
ACTA MATERIALIA (2019)
The Effect of Processing Route on Properties of HfNbTaTiZr High Entropy Alloy
Jaroslav Malek et al.
MATERIALS (2019)
Low-temperature synthesis of small-sized high-entropy oxides for water oxidation
Dongdong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Mechanochemical Synthesis of High Entropy Oxide Materials under Ambient Conditions: Dispersion of Catalysts via Entropy Maximization
Hao Chen et al.
ACS MATERIALS LETTERS (2019)
A high-entropy metal oxide as chemical anchor of polysulfide for lithium-sulfur batteries
Yuenan Zheng et al.
ENERGY STORAGE MATERIALS (2019)
Design and synthesis of a magnesium alloy for room temperature hydrogen storage
Kaveh Edalati et al.
ACTA MATERIALIA (2018)
Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties
B. Schuh et al.
ACTA MATERIALIA (2018)
Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics
T. Maity et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials
Takeshi Nagase et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Ultrafine-grained CoCrFeMnNi high-entropy alloy produced by cryogenic multi-pass caliber rolling
Jong Woo Won et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of carbon content and annealing on structure and hardness of CrFe2NiMnV0.25 high-entropy alloys processed by high-pressure torsion
Hamed Shahmir et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Effect of high-pressure torsion on grain refinement, strength enhancement and uniform ductility of EZ magnesium alloy
Krzysztof Bryla et al.
MATERIALS LETTERS (2018)
Structure and hardness of B2 ordered refractory AlNbTiVZr0.5 high entropy alloy after high-pressure torsion
N. D. Stepanov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of temperature rise on microstructural evolution during high-pressure torsion
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Vanishing of room-temperature slip avalanches in a face-centered-cubic high-entropy alloy by ultrafine grain formation
Jian Qiang et al.
SCRIPTA MATERIALIA (2018)
Review: Modes and Processes of Severe Plastic Deformation (SPD)
Vladimir Segal
MATERIALS (2018)
Evolution of Microstructure and Mechanical Properties of a CoCrFeMnNi High-Entropy Alloy during High-Pressure Torsion at Room and Cryogenic Temperatures
Sergey Zherebtsov et al.
METALS (2018)
Pressure-Induced Transformation of Graphite and Diamond to Onions
Vladimir D. Blank et al.
CRYSTALS (2018)
Strength enhancement of high entropy alloy HfNbTaTiZr by severe plastic deformation
J. Cizek et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Beating hydrogen with its own weapon: Nano-twin gradients enhance embrittlement resistance of a high-entropy alloy
Hong Luo et al.
MATERIALS TODAY (2018)
Activation energy for plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A high temperature nanoindentation study
Dong-Hyun Lee et al.
SCRIPTA MATERIALIA (2018)
Hydrogen embrittlement in different materials: A review
Sandeep Kumar Dwivedi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Developing Superplasticity in High-Entropy Alloys Processed by Severe Plastic Deformation
Hamed Shahmir et al.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2018)
Micro-Scale Mechanical Behavior of Ultrafine-Grained Materials Processed by High-Pressure Torsion
Megumi Kawasaki et al.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2018)
Direct-Contact Cytotoxicity Evaluation of CoCrFeNi-Based Multi-Principal Element Alloys
Ryan Newell et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)
Defects in High Entropy Alloy HfNbTaTiZr Prepared by High Pressure Torsion
F. Lukac et al.
ACTA PHYSICA POLONICA A (2018)
Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion
Karoline Sophie Kormout et al.
ADVANCED ENGINEERING MATERIALS (2017)
Severe plastic deformation driven nanostructure and phase evolution in a Al0.5CoCrFeMnNi dual phase high entropy alloy
T. S. Reddy et al.
INTERMETALLICS (2017)
Defect structure and hardness in nanocrystalline CoCrFeMnNi High-Entropy Alloy processed by High-Pressure Torsion
Anita Heczel et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: Comparison between experiment and calculation results
Nokeun Park et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
H. W. Yao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Amorphization at twin-twin intersected region in FeCoCrNi high-entropy alloy subjected to high-pressure torsion
Wenqian Wu et al.
MATERIALS CHARACTERIZATION (2017)
Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during high-pressure torsion at 77 K
Jongun Moon et al.
MATERIALS LETTERS (2017)
TiZrNbTaMo high-entropy alloy designed for orthopedic implants: As-cast microstructure and mechanical properties
Shao-Ping Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Ultra-severe plastic deformation: Evolution of microstructure, phase transformation and hardness in immiscible magnesium-based systems
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Resistance of CoCrFeMnNi high-entropy alloy to gaseous hydrogen embrittlement
Yakai Zhao et al.
SCRIPTA MATERIALIA (2017)
Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials
Mitsuharu Todai et al.
SCRIPTA MATERIALIA (2017)
Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys
Verena Maier-Kiener et al.
MATERIALS & DESIGN (2017)
Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy
W. Skrotzki et al.
7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (2017)
Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis
Dong-Hyun Lee et al.
ACTA MATERIALIA (2017)
Phase Decomposition of a Single-Phase AlTiVNb High-Entropy Alloy after Severe Plastic Deformation and Annealing
Benjamin Schuh et al.
ADVANCED ENGINEERING MATERIALS (2017)
New nanostructured phases with reversible hydrogen storage capability in immiscible magnesium-zirconium system produced by high-pressure torsion
Kaveh Edalati et al.
ACTA MATERIALIA (2016)
Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys
Dong-Hyun Lee et al.
ACTA MATERIALIA (2016)
Microstructure and tensile properties of nanocrystalline (FeNiCoCu)1-xTixAlx high entropy alloys processed by high pressure torsion
Ruixiao Zheng et al.
INTERMETALLICS (2016)
Hydrogen Embrittlement of Ultrafine-grained Austenitic Stainless Steels Processed by High-pressure Torsion at Moderate Temperature
Yoji Mine et al.
ISIJ INTERNATIONAL (2016)
Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation
Hao Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel
Y. Bai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
A review on high-pressure torsion (HPT) from 1935 to 1988
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effects of high pressure torsion on microstructures and properties of an Al0.1CoCrFeNi high-entropy alloy
P. F. Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Photovoltaic materials: Present efficiencies and future challenges
Albert Polman et al.
SCIENCE (2016)
Recent Advances in Heterogeneous Photocatalytic CO2 Conversion to Solar Fuels
Kan Li et al.
ACS CATALYSIS (2016)
The effect of grain size on the annealing-induced phase transformation in an Al0.3CoCrFeNi high entropy alloy
Qunhua Tang et al.
MATERIALS & DESIGN (2016)
Mechanical Properties of High Entropy Alloy Al0.1CoCrFeNi for Peripheral Vascular Stent Application
Karthik Alagarsamy et al.
CARDIOVASCULAR ENGINEERING AND TECHNOLOGY (2016)
Formation of metastable phases in magnesium-titanium system by high-pressure torsion and their hydrogen storage performance
Kaveh Edalati et al.
ACTA MATERIALIA (2015)
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
B. Schuh et al.
ACTA MATERIALIA (2015)
Empirical design of single phase high-entropy alloys with high hardness
Fuyang Tian et al.
INTERMETALLICS (2015)
Long-term hydrogen storage in Mg and ZK60 after Severe Plastic Deformation
Andreas Grill et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Dong-Hyun Lee et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Hardening of an Al0.3CoCrFeNi high entropy alloy via high-pressure torsion and thermal annealing
Q. H. Tang et al.
MATERIALS LETTERS (2015)
Implant biomaterials: A comprehensive review
Monika Saini et al.
WORLD JOURNAL OF CLINICAL CASES (2015)
Equal-Channel Angular Extrusion of a Low-Density High-Entropy Alloy Produced by High-Energy Cryogenic Mechanical Alloying
Vincent H. Hammond et al.
JOM (2014)
Semiconductors Used in Photovoltaic and Photocatalytic Devices: Assessing Fundamental Properties from DFT
Tangui Le Bahers et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Hardening of pure metals by high-pressure torsion: A physically based model employing volume-averaged defect evolutions
Marco J. Starink et al.
ACTA MATERIALIA (2013)
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Y. Estrin et al.
ACTA MATERIALIA (2013)
Mechanical Strength and Biocompatibility of Ultrafine-Grained Commercial Purity Titanium
Yuri Estrin et al.
BIOMED RESEARCH INTERNATIONAL (2013)
Superplasticity of AlCoCrCuFeNi High Entropy Alloy
A. V. Kuznetsov et al.
SUPERPLASTICITY IN ADVANCED MATERIALS (2013)
Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion
Roberto B. Figueiredo et al.
ACTA MATERIALIA (2012)
Introducing a strain-hardening capability to improve the ductility of bulk metallic glasses via severe plastic deformation
Y. B. Wang et al.
ACTA MATERIALIA (2012)
Phase transformation and nanograin refinement of silicon by processing through high-pressure torsion
Yoshifumi Ikoma et al.
APPLIED PHYSICS LETTERS (2012)
Accelerated Diffusion and Phase Transformations in Co-Cu Alloys Driven by the Severe Plastic Deformation
Boris B. Straumal et al.
MATERIALS TRANSACTIONS (2012)
Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing
Sergiy V. Divinski et al.
ACTA MATERIALIA (2011)
A review of solar photovoltaic technologies
Bhubaneswari Parida et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Correlations between hardness and atomic bond parameters of pure metals and semi-metals after processing by high-pressure torsion
Kaveh Edalati et al.
SCRIPTA MATERIALIA (2011)
Nanoscale Grain Refinement and H-Sorption Properties of MgH2 Processed by High-Pressure Torsion and Other Mechanical Routes
Daniel Rodrigo Leiva et al.
ADVANCED ENGINEERING MATERIALS (2010)
Bulk Nanostructured Functional Materials By Severe Plastic Deformation
Michael Zehetbauer et al.
ADVANCED ENGINEERING MATERIALS (2010)
Saturation of Fragmentation During Severe Plastic Deformation
R. Pippan et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Hydrogen storage in Mg: A most promising material
I. P. Jain et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy
Ruslan Z. Valiev et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Photocatalytic Water Splitting: Recent Progress and Future Challenges
Kazuhiko Maeda et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2010)
High-pressure torsion of hafniurn
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microstructures and Mechanical Properties of Pure V and Mo Processed by High-Pressure Torsion
Seungwon Lee et al.
MATERIALS TRANSACTIONS (2010)
High-Pressure Torsion of Machining Chips and Bulk Discs of Amorphous Zr50Cu30Al10Ni10
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2010)
Absolute concentration of free volume-type defects in ultrafine-grained Fe prepared by high-pressure torsion
Bernd Oberdorfer et al.
SCRIPTA MATERIALIA (2010)
Scaling-Up of High Pressure Torsion Using Ring Shape
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2009)
Severe plastic deformation (SPD) processes for metals
A. Azushima et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Producing bulk ultrafine-grained materials by severe plastic deformation
RZ Valiev et al.
JOM (2006)
The deformation physics of nanocrystalline metals: Experiments, analysis, and computations
MA Meyers et al.
JOM (2006)
Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys
E Ma
JOM (2006)
The effect of ball milling and equal channel angular pressing on the hydrogen absorption/desorption properties of Mg-4.95 wt% Zn-0.71 wt% Zr (ZK60) alloy
VM Skripnyuk et al.
ACTA MATERIALIA (2004)
Nanostructuring of metals by severe plastic deformation for advanced properties
R Valiev
NATURE MATERIALS (2004)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
High-pressure mechanochemistry: Conceptual multiscale theory and interpretation of experiments
VI Levitas
PHYSICAL REVIEW B (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Photovoltaic materials, history, status and outlook
A Goetzberger et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2003)
Hydrogen-storage materials for mobile applications
L Schlapbach et al.
NATURE (2001)