Related references
Note: Only part of the references are listed.Passive film formation and corrosion resistance of laser-powder bed fusion fabricated NiTi shape memory alloys
Ming Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)
Selective inhibition effects on cancer cells and bacteria of Ni-Ti-O nanoporous layers grown on biomedical NiTi alloy by anodization
Yan-Lian Liu et al.
RARE METALS (2022)
The passive properties of TA10 in Coca-Cola containing oral environment
Ming Liu et al.
ANTI-CORROSION METHODS AND MATERIALS (2021)
The effect of Cu-doping on the corrosion behavior of NiTi alloy arch wires under simulated clinical conditions
Jing Wang et al.
MATERIALS RESEARCH EXPRESS (2021)
Predictive analytical modelling and experimental validation of processing maps in additive manufacturing of nitinol alloys
Jia-Ning Zhu et al.
ADDITIVE MANUFACTURING (2021)
Improving exposure of anodically ordered Ni-Ti-O and corrosion resistance and biological properties of NiTi alloys by substrate electropolishing
Yong-Hua Sun et al.
RARE METALS (2021)
Atomic Layer Deposition of aTiO2 Layer on Nitinol and Its Corrosion Resistance in a Simulated Body Fluid
Rebeka Rudolf et al.
METALS (2021)
Strain induced localized corrosion of NiTi, NiTiCo and NiTiCr alloys in 0.9% NaCl
Camila Dias dos Reis Barros et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Study on corrosion behavior of the selective laser melted NiTi alloy with superior tensile property and shape memory effect
Ping Qiu et al.
CORROSION SCIENCE (2020)
Enhancement of mechanical properties and corrosion resistance of NiTi alloy by carbon plasma immersion ion implantation
Ali Shanaghi et al.
SURFACE & COATINGS TECHNOLOGY (2019)
The fabrication of NiTi shape memory alloy by selective laser melting: a review
Xizhang Chen et al.
RAPID PROTOTYPING JOURNAL (2019)
Corrosion of orthodontic archwires in artificial saliva in the presence of Lactobacillus reuteri
Ines Musa Trolic et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Tribo-corrosion characterization of NiTiCu alloy for bio-implant applications
Neeraj Sharma et al.
MATERIALS RESEARCH EXPRESS (2019)
DFT study of Ni segregation at the B2-NiTi(110)/rutile-TiO2(110) interface
J. Juan et al.
APPLIED SURFACE SCIENCE (2019)
Quantitative analysis of local fine structure on diffusion of point defects in passive film on Ti
Lu Wang et al.
ELECTROCHIMICA ACTA (2019)
Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
C. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation
Mohamad Bayat et al.
ADDITIVE MANUFACTURING (2019)
Role of Coke in the Passive Properties of Vitallium 2000 CoCrMo Casting Alloy in Simulated Oral Environment
Ming Liu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Fabrication of NiTi alloy: A review
Neeraj Sharma et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2018)
Mechanical characteristics and bioactivity of porous Ni50-xTi50Cux (x=0, 5 and 10) prepared by P/M
Neeraj Sharma et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Influence of sulfides on the passivation behavior of titanium alloy TA2 in simulated seawater environments
Xiaojia Yang et al.
APPLIED SURFACE SCIENCE (2018)
A Review of Selective Laser Melted NiTi Shape Memory Alloy
Zhong Xun Khoo et al.
MATERIALS (2018)
Effect of cobalt addition on the corrosion behavior of near equiatomic NiTi shape memory alloy in normal saline solution: electrochemical and XPS studies
Nawal D. Alqarni et al.
RSC ADVANCES (2018)
Corrosion behavior of low-Cr steel rebars in alkaline solutions with different pH in the presence of chlorides
Ming Liu et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2017)
The effect of pH, fluoride and tribocorrosion on the surface properties of dental archwires
Petra Mocnik et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
The influence of Desulfovibrio desulfuricans bacteria on a Ni-Ti alloy: electrochemical behavior and surface analysis
Joanna Michalska et al.
ELECTROCHIMICA ACTA (2017)
Effect of Cr on the passive film formation mechanism of steel rebar in saturated calcium hydroxide solution
Ming Liu et al.
APPLIED SURFACE SCIENCE (2016)
Effects of Fixed Orthodontic Treatment Using Conventional, Copper-Included, and Epoxy-Coated Nickel-Titanium Archwires on Salivary Nickel Levels: A Double-Blind Randomized Clinical Trial
Mashallah Khaneh Masjedi et al.
BIOLOGICAL TRACE ELEMENT RESEARCH (2016)
Surface corrosion enhancement of passive films on NiTi shape memory alloy in different solutions
Lv Jinlong et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Fabrication of NiTi through additive manufacturing: A review
Mohammad Elahinia et al.
PROGRESS IN MATERIALS SCIENCE (2016)
Electrochemical and passivation behavior investigation of ferritic stainless steel in alkaline environment
Hong Luo et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Surface characteristics, corrosion and bioactivity of chemically treated biomedical grade NiTi alloy
Manju Chembath et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Microstructure and corrosion behavior of laser processed NiTi alloy
Jithin J. Marattukalam et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Electrochemical corrosion performance of Cr and Al alloy steels using a J55 carbon steel as base alloy
Rong Wang et al.
CORROSION SCIENCE (2014)
Influence of the microstructure on electrochemical corrosion and nickel release in NiTi orthodontic archwires
J. Briceno et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Comparative study on corrosion behaviour of Nitinol and stainless steel orthodontic wires in simulated saliva solution in presence of fluoride ions
M. Mirjalili et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
The Estimation of Corrosion Behavior of NiTi and NiTiNb Alloys Using Dynamic Electrochemical Impedance Spectroscopy
Georgiana Bolat et al.
JOURNAL OF SPECTROSCOPY (2013)
Application of EIS to Study the Corrosion Resistance of Passivated NiTi Shape Memory Alloy in Simulated Body Fluid
M. Freitag et al.
ENVIRONMENTAL DEGRADATION OF ENGINEERING & MATERIALS ENGINEERING AND TECHNOLOGIES (2012)
A comparative study on the corrosion behavior of porous and dense NiTi shape memory alloys in NaCl solution
X. T. Sun et al.
ELECTROCHIMICA ACTA (2011)
Environmental factors affecting the corrosion behaviour of reinforcing steel: I. The early stage of passive film formation in Ca(OH)2 solutions
S. M. Abd El Haleem et al.
CORROSION SCIENCE (2010)
Electrochemical Characterization of Nickel Electrodes in Phosphate and Carbonate Electrolytes in View of Assessing a Medical Diagnostic Device for the Detection of Early Diabetes
Hanna Ayoub et al.
ELECTROANALYSIS (2010)
Corrosion behaviour of NiTi alloy
N. Figueira et al.
ELECTROCHIMICA ACTA (2009)
Study of Cu-18Ni-20Zn Nickel Silver and other Cu-based alloys in artificial sweat and physiological solution
Ingrid Milogev et al.
ELECTROCHIMICA ACTA (2007)
EIS diagnosis on the corrosion behavior of TiN coated NiTi surgical alloy
DZ Yang et al.
CURRENT APPLIED PHYSICS (2005)
Ion release from NiTi orthodontic wires in artificial saliva with various acidities
HH Huang et al.
BIOMATERIALS (2003)
Share Paper
