Related references
Note: Only part of the references are listed.Notched fatigue of additive manufactured metals under axial and multiaxial loadings, part II: Data correlations and life estimations
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Correlations of fatigue strength of additively manufactured metals with hardness and defect size
Christopher Derrick et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Properties and applications of additively manufactured metallic cellular materials: A review
Anton du Plessis et al.
PROGRESS IN MATERIALS SCIENCE (2022)
Advances in additive manufacturing of metal-based functionally graded materials
Ashley Reichardt et al.
INTERNATIONAL MATERIALS REVIEWS (2021)
Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
Niloofar Sanaei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Defect-based fatigue life prediction of L-PBF additive manufactured metals
Niloofar Sanaei et al.
ENGINEERING FRACTURE MECHANICS (2021)
Ductile damage assessment of Ti6Al4V, 17-4PH and AlSi10Mg for additive manufacturing
F. Nalli et al.
ENGINEERING FRACTURE MECHANICS (2021)
Constant/variable amplitude multiaxial notch fatigue of additively manufactured AISI 316L
Yingyu Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
A machine-learning fatigue life prediction approach of additively manufactured metals
Hongyixi Bao et al.
ENGINEERING FRACTURE MECHANICS (2021)
Additive manufacturing of biomorphic scaffolds for bone tissue engineering
Fabrizia Caiazzo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Effect of micro-defects on fatigue lifetime of additive manufactured 316L stainless steel under multiaxial loading
Yingyu Wang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
Defect-based multiaxial fatigue life prediction of L-PBF additive manufactured metals
Niloofar Sanaei et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
A novel approach based on the elastoplastic fatigue damage and machine learning models for life prediction of aerospace alloy parts fabricated by additive manufacturing
Zhixin Zhan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Fatigue performance of additive manufactured metals under variable amplitude service loading conditions including multiaxial stresses and notch effects: Experiments and modelling
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
M. Benedetti et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Data-driven fatigue life prediction in additive manufactured titanium alloy: A damage mechanics based machine learning framework
Zhixin Zhan et al.
ENGINEERING FRACTURE MECHANICS (2021)
Multiaxial fatigue behavior of SLM Ti6Al4V alloy under different loading conditions
Danilo A. Renzo et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: A CFD analysis
Davar Ali et al.
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2020)
Additive manufacturing infill optimization for automotive 3D-printed ABS components
Matt Schmitt et al.
RAPID PROTOTYPING JOURNAL (2020)
Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds
Arun Arjunan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Novel specimen geometries for fatigue testing of additive manufactured metals under axial, torsion, and combined axial-torsion loadings
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects
J. W. Pegues et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
The Level of the Additive Manufacturing Technology Use in Polish Metal and Automotive Manufacturing Enterprises
Justyna Patalas-Maliszewska et al.
APPLIED SCIENCES-BASEL (2020)
A diagram for capturing and predicting failure locations in notch geometries produced by additive manufacturing
Klas Solberg et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Influence of layer-wise fabrication and surface orientation on the notch fatigue behavior of as-built additively manufactured Ti6Al4V
Gianni Nicoletto et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications
A. Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Analysis of the effect of internal defects on fatigue performance of additive manufactured metals
Niloofar Sanaei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Multi-Material 3D and 4D Printing: A Survey
Mohammad Rafiee et al.
ADVANCED SCIENCE (2020)
Effect of multiaxial bending-torsion loading on fracture surface parameters in high-strength steels processed by conventional and additive manufacturing
W. Macek et al.
ENGINEERING FAILURE ANALYSIS (2020)
Multiaxial fatigue of LB-PBF additive manufactured 17-4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Recent developments in metal additive manufacturing
Amit Bandyopadhyay et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review
Hao Chen et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Fatigue assessment of high strength welded joints through the strain energy density method
Pietro Foti et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals
Niloofar Sanaei et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
An experimental and numerical study of the high cycle multiaxial fatigue strength of titanium lattice structures produced by Selective Laser Melting (SLM)
Khalil Refai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
A numerical framework to predict the fatigue life of lattice structures built by additive manufacturing
Alexis Burr et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Validation of Numerical Models of a Rotorcraft Crashworthy Seat and Subfloor
Paolo Astori et al.
AEROSPACE (2020)
Determination of Fatigue Limit by Static Thermographic Method and Classic Thermographic Method on Notched Specimens
Pietro Foti et al.
1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1) (2020)
Evaluation of fatigue properties of 3D-printed Polyamide-12 by means of energy approach during tensile tests
Dario Santonocito
1ST VIRTUAL CONFERENCE ON STRUCTURAL INTEGRITY (VCSI1) (2020)
Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants
F. Bartolomeu et al.
OPTICS AND LASERS IN ENGINEERING (2020)
Strategies for creating living, additively manufactured, open-cellular metal and alloy implants by promoting osseointegration, osteoinduction and vascularization: An overview
Lawrence E. Murr
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects
Ali Fatemi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Crack paths in additive manufactured metallic materials subjected to multiaxial cyclic loads including surface roughness, HIP, and notch effects
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering
Cambre N. Kelly et al.
ACTA BIOMATERIALIA (2019)
Experiments and numerical simulations for the fatigue behavior of a novel TA2-TA15 titanium alloy fabricated by laser melting deposition
Zhixin Zhan
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Criticality of porosity defects on the fatigue performance of wire plus arc additive manufactured titanium alloy
Romali Biswal et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Notch-defect interaction in additively manufactured Inconel 718
K. Solberg et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Design of metallic bone by additive manufacturing
Enrique Alabort et al.
SCRIPTA MATERIALIA (2019)
Interpretation of the fatigue anisotropy of additively manufactured TA6V alloys via a fracture mechanics approach
Viet-Duc Le et al.
ENGINEERING FRACTURE MECHANICS (2019)
Fatigue of additively manufactured 316L stainless steel: The influence of porosity and surface roughness
Klas Solberg et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
P. D. Nezhadfar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure
P. D. Nezhadfar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Environmental assessment of additive manufacturing in the automotive industry
Daniel Bockin et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Cyclic plastic behavior of additively manufactured Ti-6Al-4V under uniaxial nand multiaxial non-proportional loading
Stefano Bressan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Multiaxial fatigue analysis of notched components using combined critical plane and critical distance approach
Ding Liao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Additive manufacturing of functionally graded materials: A review
Chi Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High cycle fatigue life prediction of laser additive manufactured stainless steel: A machine learning approach
Meng Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Surface roughness effect on multiaxial fatigue behavior of additive manufactured metals and its modeling
Jingzhe Zhang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
Niloofar Sanaei et al.
MATERIALS & DESIGN (2019)
Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys
J. S. Zuback et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Mechanical performance of additively manufactured meta-biomaterials
Amir A. Zadpoor
ACTA BIOMATERIALIA (2019)
Multiaxial fatigue behavior of additive manufactured Ti-6Al-4V under in-phase stresses
Danilo A. Renzo et al.
25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (2019)
Fatigue lifetime evaluation of notched components: Implementation of the control volume concept in a strain-based LCF criterion
Sabrina Vantadori et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Bone Mechanical Properties in Healthy and Diseased States
Elise F. Morgan et al.
ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 20 (2018)
Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges
X. Z. Zhang et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)
A new critical plane-energy model for multiaxial fatigue life prediction of turbine disc alloys
Shen Xu et al.
ENGINEERING FAILURE ANALYSIS (2018)
Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
S. Romano et al.
ENGINEERING FRACTURE MECHANICS (2018)
Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape
A. Yadollahi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Fatigue assessment of metallic components under uniaxial and multiaxial variable amplitude loading
A. Carpinteri et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Multiaxial variable amplitude fatigue life analysis using the critical plane approach, Part II: Notched specimen experiments and life estimations
Nicholas R. Gates et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
Jonathan Pegues et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Modelling multiaxial fatigue with a new combination of critical plane definition and energy-based criterion
C. Lu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials
Shun-Peng Zhu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Representing crack growth in additively manufactured Ti-6Al-4V
R. Jones et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V
Fei Cao et al.
JOM (2018)
Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
M. Dallago et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Additive manufacturing of multi-material structures
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V
Haider Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Welded joints under multiaxial non-proportional loading
Andrea Carpinteri et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM
Dheyaa S. J. Al-Saedi et al.
MATERIALS & DESIGN (2018)
Gyroid porous titanium structures: A versatile solution to be used as scaffolds in bone defect reconstruction
A. Yanez et al.
MATERIALS & DESIGN (2018)
Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications
Arash Ataee et al.
MATERIALS & DESIGN (2018)
Predictive models for fatigue property of laser powder bed fusion stainless steel 316L
Meng Zhang et al.
MATERIALS & DESIGN (2018)
Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6A1-4V including build orientation and surface roughness effects
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
A new method for studying the effect of multiaxial strain states on low cycle non-proportional fatigue prediction
Bowen Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density
Yingjun Wang et al.
JOURNAL OF MECHANICAL DESIGN (2018)
Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load
Karel Lietaert et al.
SCIENTIFIC REPORTS (2018)
Surface roughness of Ti-6A1-4V parts obtained by SLM and EBM: Effect on the High Cycle Fatigue life
Bastien Vayssette et al.
7TH INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2017 (2018)
Fatigue Design with Additive Manufactured Metals: Issues to Consider and Perspective for Future Research
Reza Molaei et al.
7TH INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2017 (2018)
Fatigue life of a railway wheel under uniaxial and multiaxial loadings
H. Soares et al.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)
Crack Growth in a Range of Additively Manufactured Aerospace Structural Materials
Athanasios Iliopoulos et al.
AEROSPACE (2018)
Additive Manufacturing of Biomaterials, Tissues, and Organs
Amir A. Zadpoor et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Experimental fatigue crack growth behavior and predictions under multiaxial variable amplitude service loading histories
Nicholas R. Gates et al.
ENGINEERING FRACTURE MECHANICS (2017)
The imaging of failure in structural materials by synchrotron radiation X-ray microtomography
S. C. Wu et al.
ENGINEERING FRACTURE MECHANICS (2017)
Additive manufacturing tooling for the automotive industry
R. Leal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Estimation of fatigue life under multiaxial loading by varying the critical plane orientation
Andrea Carpinteri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Multiaxial variable amplitude fatigue life analysis using the critical plane approach, Part I: Un-notched specimen experiments and life estimations
Nicholas R. Gates et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Torsional fatigue behavior of wrought and additive manufactured Ti-6A1-4V by powder bed fusion including surface finish effect
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue properties of a titanium alloy (Ti-6Al-4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
Nikolas Hrabe et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Daniel Greitemeier et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Anisotropic high cycle fatigue behavior of Ti-6Al-4V obtained by powder bed laser fusion
Gianni Nicoletto
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Low-cycle multiaxial fatigue behaviour and fatigue life prediction for CuZn37 brass using the stress-strain models
Dariusz Skibicki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Non-linear incremental fatigue damage calculation for multiaxial non-proportional histories
Marco Antonio Meggiolaro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
On the consideration of normal and shear stress interaction in multiaxial fatigue damage analysis
Nicholas R. Gates et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces
M. Kahlin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue behavior of Ti-6A1-4V ELI including mean stress effects
Patricio E. Carrion et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue Behavior and Modeling of Additively Manufactured Ti-6Al-4V Including Interlayer Time Interval Effects
Brian Torries et al.
JOM (2017)
The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting
M. Benedetti et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Open-cellular metal implant design and fabrication for biomechanical compatibility with bone using electron beam melting
L. E. Murr
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility
X. P. Tan et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
Haider Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion
N. P. Lavery et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Design for additive manufacturing with site-specific properties in metals and alloys
S. Tammas-Williams et al.
SCRIPTA MATERIALIA (2017)
Effect of loading orientation on fatigue behaviour in severely notched round bars under non-zero mean stress bending-torsion
Ricardo Branco et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
S. Tammas-Williams et al.
SCIENTIFIC REPORTS (2017)
Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review
Xiang-Yu Zhang et al.
MATERIALS (2017)
Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting
Brecht van Hooreweder et al.
ACTA BIOMATERIALIA (2017)
Solubility of argon in laser additive manufactured α-titanium under hot isostatic pressing condition
Shuai Shao et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations
Lourdes D. Bobbio et al.
ACTA MATERIALIA (2017)
Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting
Y. J. Liu et al.
ACTA MATERIALIA (2017)
Analysis of barriers to implement additive manufacturing technology in the Indian automotive sector
Gourav Dwivedi et al.
INTERNATIONAL JOURNAL OF PHYSICAL DISTRIBUTION & LOGISTICS MANAGEMENT (2017)
Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
Beth E. Carroll et al.
ACTA MATERIALIA (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Fatigue crack growth behavior in the presence of notches and multiaxial nominal stress states
Nicholas Gates et al.
ENGINEERING FRACTURE MECHANICS (2016)
Innovative computational modeling of multiaxial fatigue analysis for notched components
A. Ince et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Analysis of revised fatigue life calculation algorithm under proportional and non-proportional loading with constant amplitude
Aleksander Karolczuk
INTERNATIONAL JOURNAL OF FATIGUE (2016)
A new path-dependent fatigue damage model for non-proportional multi-axial loading
Jifa Mei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Fatigue life evaluation of metallic structures under multiaxial random loading
Andrea Carpinteri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Friction and roughness induced closure effects on shear-mode crack growth and branching mechanisms
Nicholas Gates et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Fatigue life and early cracking predictions of extruded AZ31B magnesium alloy using critical plane approaches
Fabio Castro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research
P. Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V
Niyanth Sridharan et al.
JOM (2016)
The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
S. Zhao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications
A. Yanez et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Amanda J. Sterling et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Anisotropy in the impact toughness of selective laser melted Ti-6Al-4V alloy
Ming-Wei Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The positive effect of hot isostatic pressing on improving the anisotropies of bending and impact properties in selective laser melted Ti-6Al-4V alloy
Ming-Wei Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of surface roughness on fatigue performance of additive manufactured Ti-6Al-4V
D. Greitemeier et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Fatigue damage and life evaluation of SS304 and Al 7050-T7541 alloys under various multiaxial strain paths by means of energy-based Fatigue damage models
G. R. Ahmadzadeh et al.
MECHANICS OF MATERIALS (2016)
The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting
Samuel Tammas-Williams et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Fatigue assessment of notched specimens by means of a critical plane-based criterion and energy concepts
Andrea Carpinteri et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
Nesma T. Aboulkhair et al.
MATERIALS & DESIGN (2016)
Fatigue behavior of IN718 microtrusses produced via additive manufacturing
Lena Huynh et al.
MATERIALS & DESIGN (2016)
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
Galina Kasperovich et al.
MATERIALS & DESIGN (2016)
Influence of build direction on the fatigue behaviour of Ti6Al4V alloy produced by direct metal laser sintering
Adrian Baca et al.
MATERIALS TODAY-PROCEEDINGS (2016)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Mixed mode fatigue crack initiation and growth in a CT specimen repaired by stop hole technique
Majid R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2015)
Study of crack orientation and fatigue life prediction in biaxial fatigue with critical plane models
P. Lopez-Crespo et al.
ENGINEERING FRACTURE MECHANICS (2015)
Fatigue life estimation under multiaxial random loading by means of the equivalent Lemaitre stress and multiaxial S-N curve methods
Jingran Ge et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Random multiaxial fatigue: A comparative analysis among selected frequency and time domain fatigue evaluation methods
C. Braccesi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Galina Kasperovich et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
S. Amin Yavari et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Aref Yadollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Critical Plane Orientation Influence on Multiaxial High-Cycle Fatigue Assessment
A. Carpinteri et al.
PHYSICAL MESOMECHANICS (2015)
Critical Plane Orientation Influence on Multiaxial High-Cycle Fatigue Assessment
A. Carpinteri et al.
PHYSICAL MESOMECHANICS (2015)
Influence of defects on mechanical properties of Ti-6Al-4 V components produced by selective laser melting and electron beam melting
Haijun Gong et al.
MATERIALS & DESIGN (2015)
Fatigue strength of severely notched specimens made of Ti-6Al-4V under multiaxial loading
F. Berto et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
A generalized fatigue damage parameter for multiaxial fatigue life prediction under proportional and non-proportional loadings
Ayhan Ince et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
New approach for analysis of complex multiaxial loading paths
V. Anes et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Review of fatigue crack growth under non-proportional mixed-mode loading
P. Zerres et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Small fatigue crack growth under multiaxial stresses
Nima Shamsaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Notched fatigue behavior and stress analysis under multiaxial states of stress
Nicholas Gates et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Reformulation in the frequency domain of a critical plane-based multiaxial fatigue criterion
Andrea Carpinteri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
On the multiaxial fatigue assessment of complex three-dimensional stress concentrators
R. Louks et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
On the use of the Prismatic Hull method in a critical plane-based multiaxial fatigue criterion
Andrea Carpinteri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
New cycle counting method for multiaxial fatigue
Vitor Anes et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Multiaxial life predictions in absence of any fatigue properties
Nima Shamsaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Computational modeling of multiaxial elasto-plastic stress-strain response for notched components under non-proportional loading
A. Ince et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
New energy model for fatigue life determination under multiaxial loading with different mean values
Krzysztof Kluger et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Prediction of non-proportionality factors of multiaxial histories using the Moment Of Inertia method
Marco Antonio Meggiolaro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Compositionally graded metals: A new frontier of additive manufacturing
Douglas C. Hofmann et al.
JOURNAL OF MATERIALS RESEARCH (2014)
On the fatigue properties of metals manufactured by selective laser melting - The role of ductility
Stefan Leuders et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Fatigue performance evaluation of selective laser melted Ti-6Al-4V
P. Edwards et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6A1-4V
M. Simonelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Load sequence effects on fatigue crack growth in notched tubular specimens subjected to axial and torsion loadings
Maksym Gladskyi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Application of stress-based multiaxial fatigue criteria for laserbeam-welded thin aluminium joints under proportional and non-proportional variable amplitude loadings
A. Bolchoun et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Lifetime estimation in the low/medium-cycle regime using the Carpinteri-Spagnoli multiaxial fatigue criterion
Andrea Carpinteri et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Determining fatigue limits with thermal analysis of static traction tests
A. Risitano et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
S. Lenders et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Multiaxial low cycle fatigue life under non-proportional loading
Takamoto Itoh et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2013)
Surface roughness analysis, modelling and prediction in selective laser melting
Giovanni Strano et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants
Kwai S. Chan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Creep-fatigue life of Sn-8Zn-3Bi solder under multiaxial loading
Takaei Yamamoto et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
A notch multiaxial-fatigue approach based on damage mechanics
Roberto Brighenti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
A critical distance/plane method to estimate finite life of notched components under variable amplitude uniaxial/multiaxial fatigue loading
Luca Susmel et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Laser-welded dissimilar steel-aluminum seams for automotive lightweight construction
M. Schimek et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Lawrence E. Murr et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2012)
Multiaxial fatigue assessment using a simplified critical plane-based criterion
Andrea Carpinteri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Fatigue strength of structural components under multi-axial loading in terms of local energy density averaged on a control volume
F. Berto et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Multiaxial fatigue: An overview and some approximation models for life estimation
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
The effect of specimen geometry on the low cycle fatigue life of metallic materials
Keun-Ho Bae et al.
MATERIALS AT HIGH TEMPERATURES (2011)
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
T. Vilaro et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2010)
Differential effects of designed scaffold permeability on chondrogenesis by chondrocytes and bone marrow stromal cells
Jessica M. Kemppainen et al.
BIOMATERIALS (2010)
A General Algorithm for Inverse Modeling of Layer-By-Layer Liquid-Metal Deposition
S. G. Lambrakos et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)
Multi-material bonding in ultrasonic consolidation
J. O. Obielodan et al.
RAPID PROTOTYPING JOURNAL (2010)
Fatigue assessment of welded joints under slit-parallel loading based on strain energy density or notch rounding
D. Radaj et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
An Algorithm for Inverse Modeling of Layer-by-Layer Deposition Processes
S. G. Lambrakos et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2009)
Determination of fragments of multiaxial service loading strongly influencing the fatigue of machine components
Adam Nieslony
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2009)
A multiaxial criterion for notch high-cycle fatigue using a critical-point method
Andrea Carpinteri et al.
ENGINEERING FRACTURE MECHANICS (2008)
The theory of critical distances: a review of its applications in fatigue
Luca Susmel
ENGINEERING FRACTURE MECHANICS (2008)
Thermal behavior and microstructural evolution during laser deposition with laser-engineered net shaping: Part I. Numerical calculations
B. Zheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Thermal behavior and microstructure evolution during laser deposition with laser-engineered net shaping: Part II. Experimental investigation and discussion
B. Zheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Aircraft life management using crack initiation and crack growth models - P-3C Aircraft experience
Nagaraja Iyyer et al.
INTERNATIONAL JOURNAL OF FATIGUE (2007)
Worn area modeling for automating the repair of turbine blades
Jianming Zheng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
A generalized Paris' law for fatigue crack growth
N. Pugno et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)
Fatigue crack initiation life prediction of railroad wheels
Yongming Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Influence of casting surfaces on fatigue strength of ductile cast iron
J Yamabe et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2006)
The mean stress effect on the high-cycle fatigue strength from a multiaxial fatigue point of view
L Susmel et al.
INTERNATIONAL JOURNAL OF FATIGUE (2005)
A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials
A Karolczuk et al.
INTERNATIONAL JOURNAL OF FRACTURE (2005)
Multiaxial high-cycle fatigue criterion and life prediction for metals
YM Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2005)
Investigation of a 3D non-contact measurement based blade repair integration system
J Gao et al.
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY (2005)
Evaluation and comparison of several multiaxial fatigue criteria
YY Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2004)
Materials science - Thermal barrier coatings for gas-turbine engine applications
NP Padture et al.
SCIENCE (2002)
Crack growth mechanism in precracked torsional fatigue specimens
C Makabe et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)
The laser additive manufacture of Ti-6Al-4V
PA Kobryn et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2001)
Multiaxial high-cycle fatigue criterion for hard metals
A Carpinteri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2001)
Mixed-mode, high-cycle fatigue-crack growth thresholds in Ti-6Al-4VI. A comparison of large- and short-crack behavior
JP Campbell et al.
ENGINEERING FRACTURE MECHANICS (2000)
Strain-controlled fatigue properties of steels and some simple approximations
ML Roessle et al.
INTERNATIONAL JOURNAL OF FATIGUE (2000)
A new energy-critical plane parameter for fatigue life assessment of various metallic materials subjected to in-phase and out-of-phase multiaxial fatigue loading conditions
A Varvani-Farahani
INTERNATIONAL JOURNAL OF FATIGUE (2000)
Share Paper
