☆ 4.3 Article

Eco-friendly sustainable machining with MoS2-based solid lubricant

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Fabrication and characterization of composite MoS2-TiO2 coating material

Avinash Borgaonkar et al.

Summary: The study aimed to enhance the tribological properties of MoS2 coating by doping TiO2 nanoparticles as a reinforcement material. However, an increase in TiO2 content beyond 15% resulted in a brittle nature of the coating, leading to reduced scratch resistance.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Tribological behavior prediction of composite MoS2-TiO2 coating using Taguchi coupled artificial neural network approach

Avinash Borgaonkar et al.

Summary: Solid lubricants are commonly used in tribological applications due to their excellent lubricating properties in extreme environmental conditions. The tribological performance of lubricated surfaces can be significantly improved by optimizing the coating material properties. In this study, a composite MoS2-TiO2 coating was fabricated and the effects of different parameters on the tribological behavior of the coating were investigated using design of experiment techniques such as Taguchi and artificial neural network (ANN) approach. The study showed that ANN provides more accurate predictions of the responses compared to the Taguchi approach.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Tribological Investigation of Composite MoS2-TiO2-ZrO2 Coating Material by Response Surface Methodology Approach

Avinash Borgaonkar et al.

Summary: In this study, the wear resistance of a pure MoS2 coating was improved by incorporating TiO2 and ZrO2 nanoparticles as a reinforcement material. The tribological properties of the composite coating were significantly improved compared to the pure MoS2 coating.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2022)

Add to Collection

Article Engineering, Mechanical

Effect of coating material properties on the lubrication performance of rolling contacts under TEHL regime

Avinash Borgaonkar et al.

Summary: This study investigates the impact of mechanical and thermo-physical properties of the coating material on the lubrication performance of rolling contact under the TEHL regime. It is found that the elasticity of the coating affects the pressure intensity, and the coating thickness affects the contact width. Furthermore, materials with lower density, thermal conductivity, and heat capacity act as insulating materials, leading to an increase in lubricant temperature.

AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Friction and wear behaviour of composite MoS2-TiO2 coating material in dry sliding contact

Avinash Borgaonkar et al.

Summary: In this study, the tribological performance of MoS2 coating was improved by incorporating TiO2 nanoparticles as a reinforcement material. The composite MoS2-TiO2 coating exhibited excellent tribological properties, with the crystallite size and weight percentage of TiO2 significantly impacting the performance. The influence of temperature and coating thickness on the tribological properties of the composite coating was also investigated, showing a decrease in friction coefficient and an increase in wear rate with higher temperatures and coating thickness.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

Add to Collection

Article Engineering, Manufacturing

Performance profiling of solid lubricant for eco-friendly sustainable manufacturing

Vaibhav Agarwal et al.

Summary: Solid lubricants play a critical role in controlling temperature, reducing wear, improving tool life and surface roughness in machining. They are considered an eco-friendly option for sustainable manufacturing.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Review Engineering, Multidisciplinary

Effect of coatings on rolling contact fatigue and tribological parameters of rolling/sliding contacts under dry/lubricated conditions: a review

A. Borgaonkar et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Interfacial Strength and Surface Damage Characteristics of Atomically Thin h-BN, MoS2, and Graphene

Bien-Cuong Tran Khac et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Engineering, Manufacturing

Investigation of the solid lubrication effect of commercial boron-based compounds in end milling

Koray Kilicay et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes

Deng Jianxin et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)

Add to Collection

Article Automation & Control Systems

Cutting performance of cemented-carbides-based self-lubricated tool embedded with different solid lubricants

Song Wenlong et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

Add to Collection

Article Engineering, Mechanical

Solid lubricants in machining

P. Vamsi Krishna et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2011)

Add to Collection

Article Engineering, Mechanical

Friction and wear behaviors of the carbide tools embedded with solid lubricants in sliding wear tests and in dry cutting processes

Deng Jianxin et al.

WEAR (2011)

Add to Collection

Article Engineering, Manufacturing

Development of electrostatic solid lubrication system for improvement in machining process performance

Narala Suresh Kumar Reddy et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)

Add to Collection

Article Engineering, Mechanical

Experimental investigation to study the performance of solid lubricants in turning of AISI1040 steel

P. Vamsi Krishna et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2010)

Add to Collection

Article Engineering, Manufacturing

Performance of a cemented carbide self-lubricating tool embedded with solid lubricants in dry machining

Song Wenlong et al.

Journal of Manufacturing Processes (2010)

Add to Collection

Article Engineering, Manufacturing

The influence of solid lubricant particle size on machining parameters in turning

D. Nageswara Rao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

Add to Collection

Article Engineering, Manufacturing

Performance evaluation of solid lubricants in terms of machining parameters in turning

P. Vamsi Krishna et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

Add to Collection

Article Engineering, Multidisciplinary

Study of solid lubrication with MoS2 coating in the presence of additives using reciprocating ball-on-flat scratch tester

A. Shankara et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2008)

Add to Collection

Article Automation & Control Systems

Performance improvement of hard turning with solid lubricants

Singh Dilbag et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

Add to Collection

Article Engineering, Manufacturing

Investigation to study the applicability of solid lubricant in turning AISI 1040 steel

Deep Mukhopadhyay et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Article Engineering, Manufacturing

Performance improvement of SiC grinding using solid lubricants

Sanjay Agarwal et al.

MACHINING SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Article Engineering, Manufacturing

Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling

NSK Reddy et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)

Add to Collection

Article Engineering, Manufacturing

Performance improvement of end milling using graphite as a solid lubricant

NSK Reddy et al.

MATERIALS AND MANUFACTURING PROCESSES (2005)

Add to Collection

Article Engineering, Chemical

Solid lubricant coatings: recent developments and future trends

C Donnet et al.

TRIBOLOGY LETTERS (2004)

Add to Collection

Article Engineering, Manufacturing

Force and specific energy in stone cutting by diamond mill

W Polini et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)

Add to Collection

Article Engineering, Manufacturing

Investigations on the application of solid lubricants in grinding

S Shaji et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2002)

Add to Collection

Article Engineering, Mechanical

New solid lubricant coatings

DG Teer

WEAR (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.