Recent advancement in surface modification of aramid fiber assisted by supercritical carbon dioxide

Article Chemistry, Physical

Surface modification of aramid fiber with acrylic acid assisted by supercritical carbon dioxide

Yi-Tong Han et al.

Summary: Surface modification of aramid fiber using acrylic acid in supercritical carbon dioxide was found to effectively improve its interfacial properties in reinforced composite applications while maintaining fiber strength.

JOURNAL OF SUPERCRITICAL FLUIDS (2023)

Add to Collection

Article Materials Science, Textiles

Studies on properties of coated para-aramid fabric samples developed for military applications - post UVA-340 exposure

R. G. Revaiah et al.

Summary: In this article, the authors studied coated technical fabrics for military and space exploration applications, specifically focusing on finding suitable barrier chemicals for military inflatable devices used in high altitude regions with intense ultraviolet (UV) radiation. They prepared 12 varieties of coated fabrics using para-aramid as the base fabric and four different barrier chemicals for coating. The aim was to find a low weight, high performance fabric that offers air/water proofness, UV protection, and abrasion resistance, as para-aramid loses its mechanical properties under UV radiation.

JOURNAL OF THE TEXTILE INSTITUTE (2023)

Add to Collection

Review Materials Science, Multidisciplinary

A review of carbon fiber surface modification methods for tailor-made bond behavior with cementitious matrices

Huanyu Li et al.

Summary: Insufficient bonding between hydrophobic carbon fibers and water-based suspensions has limited the application of carbon fiber reinforced cements and other mineral building materials. Researchers have explored physical and chemical modification methods to enhance load transfer from mineral matrices to carbon fibers. Polymer impregnations and temperature-stable mineral suspensions have been used to improve the interface between carbon fibers and matrices, achieving better pullout behavior. Surface modification techniques such as oxidation and electrophoretic deposition have also been employed to improve fiber-matrix interactions. This article systematically reviews and compares these approaches, providing recommendations for achieving tailor-made interfacial bonding behavior.

PROGRESS IN MATERIALS SCIENCE (2023)

Add to Collection

Article Engineering, Mechanical

Nonlinear dynamic analysis of bolted CFRC plates: Combined nonlinear effects

Xiaofeng Liu et al.

Summary: Based on the material nonlinearity of carbon fiber reinforced composites (CFRC) obtained in previous work, this paper further studies the nonlinear dynamical behaviors of bolt-connected CFRC plates. A joint parameter identification method is proposed to accurately identify the nonlinear mechanical parameters of the joint interface. A combined nonlinear parameter tracking model is developed to capture CFRC-material and joint nonlinearity. The analysis of a bolt-connected CFRC plate demonstrates the effectiveness of the proposed models in tracking parameters and simulating the mechanical behavior of the joint.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Chemistry, Physical

Effect of SiO2 nano-interphase on the water absorption mechanism of natural fiber reinforced composites: A multi-scale study

Xuan Liu et al.

Summary: This study designs a SiO2 nano-interphase between jute fibers and polypropylene to prevent interface failure caused by water absorption. Through molecular dynamic simulation, microstructure characterization, and macroscopic water absorption test, the underlying mechanism of water absorption for Jute-SiO2/PP composites at different scales is elaborated. The results show that the SiO2/PP interface and the jute-SiO2 interface effectively protect the composites from water diffusion, leading to enhanced water resistance and dimensional stability.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Improvement of the Mechanical Properties by Surface Modification of ZnCl2 and Polydopamine in Aramid Fiber Composites

Guangxian Xu et al.

Summary: Surface modification of aramid fiber improves the interfacial adhesion between the fiber and the matrix, enhancing the mechanical performance of the composite material. The hybrid surface treatment of ZnCl2 and polydopamine shows significant improvement in impact energy and bending strength.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Review Engineering, Chemical

Exertions of Magnetic Polymer Composites Fabricated via 3D Printing

G. Krishnaja et al.

Summary: The breakthrough of 3D printing technique has greatly expanded the application range of magnetic polymer composites, which are formed by embedding magnetic particulates into a polymeric matrix. These composites possess unique magnetic and mechanical properties and find various applications in different fields such as biomedical, electronics, and soft robotics.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Review Materials Science, Composites

A compendious review on fatigue properties of the bio-nanocomposites

Dhandapani Aravind et al.

Summary: A review on the fatigue strength of bio-nano composites highlights their higher fatigue strength compared to conventional materials, as shown by flatter S-N curves. Improvements in fiber-matrix interfacial bonding and the incorporation of nanofillers enhance the fatigue performance of composites. Understanding the fatigue properties of materials is crucial for various engineering applications.

POLYMER COMPOSITES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Supercritical carbon dioxide assisted impregnation and graft of polyamide acid into aramid fiber for formation of polar interface

Yang Li et al.

Summary: In this study, a two-step process combining hot air treatment and graft reaction of polyamide acid assisted with supercritical carbon dioxide was used for the surface modification of para-aramid fiber. The results showed that the thickness of the grafted layer on the fiber surface was increased successfully, and the interfacial shear strength was significantly improved. This study provides a feasible method for the interfacial modification of para-aramid fiber and expands the application of supercritical carbon dioxide in its surface modification.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Polymer Science

A review on polybenzimidazoles blends and nanocomposites for engineering applications

Jigar Patdiya et al.

Summary: This paper introduces the characteristics and applications of polybenzimidazole (PBI) materials, mainly focusing on their performance and stability at high temperatures, as well as their composite forms with other materials.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2022)

Add to Collection

Article Polymer Science

PVDF based electrospun composite material for electromagnetic interference (EMI) shielding application

Vishal Prajapati et al.

Summary: The W type Barium hexaferrite was synthesized using a sol-gel auto-combustion method and its properties were analyzed through various techniques. A hybrid compound of BaCo2Fe16O27 / RGO was prepared and dispersed in PVDF to fabricate electrospun films for EMI shielding applications, exhibiting absorption dominant shielding nature with high SE values. This lightweight and flexible film can be considered for shielding applications due to its excellent performance.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2022)

Add to Collection

Review Polymer Science

Metals to polymer composites for submerged hull: a paradigm shift

Pramit Kumar Sarkar et al.

Summary: This review paper provides an overview of the history, importance, processing techniques, and material selection for marine composites, with a focus on hull materials and life cycle analysis.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2021)

Add to Collection

Review Engineering, Chemical

Additive Manufacturing of Shape Memory Polymer Composites for Futuristic Technology

Jigar Patadiya et al.

Summary: The development of device, structure, design, and space component mechanisms is crucial for performance and cost in the aeronautical and space industry. The emergence of 4D printing technology, incorporating intelligent materials like shape memory polymers and shape memory alloys, allows for transformation in objects based on environmental commands. This technology has significant potential applications in various fields such as medical, sensors, robotics, and aerospace structures.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Review Polymer Science

Surface and interface modification of aramid fiber and its reinforcement for polymer composites: A review

Bo Zhang et al.

Summary: Aramid fiber is widely used in composites reinforcement due to its excellent properties, but its surface limits its applications. Surface modification methods have been conducted to improve the adhesion between fiber and matrix. This review summarizes the recent progress of different surface modification methods of aramid fiber and its reinforcement to polymers, discussing existing problems and future research prospects.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Nanoparticles and Nanocrystals by Supercritical CO2-Assisted Techniques for Pharmaceutical Applications: A Review

Paola Franco et al.

Summary: The use of supercritical micronization/nanonization techniques can improve the efficacy of active compounds in pharmaceuticals, offering numerous advantages over traditional methods.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Polymer Science

One Surface Treatment, Multiple Possibilities: Broadening the Use-Potential of Para-Aramid Fibers with Mechanical Adhesion

Sarianna Palola et al.

Summary: This study investigates how to enhance the adhesion properties between aramid fibers and matrix materials through mechanical adhesion and surface modification with nanostructures, resulting in increased interfacial shear strength. Various characterization techniques, such as Fourier transform infrared spectroscopy and scanning electron microscopy, were used to evaluate the surface morphology and failure mechanisms at the fiber-matrix interface.

POLYMERS (2021)

Add to Collection

Article Biology

Functionalized non-woven surfaces for combating the spread of the COVID-19 pandemic

Nikhil Avinash Patil et al.

Summary: The study found that the face mask had a bacterial filtration efficacy of over 99% against Staphylococcus aureus, and a computational analysis showed effective docking performance of herbal phytochemicals against harmful virus structures. Additionally, the face mask met regulatory standards for breathability with a breathing resistance of 30 Pa at a flow rate of 30 l h(-1), indicating high potential for real-world applications.

INTERFACE FOCUS (2021)

Add to Collection

Review Polymer Science

Progress in 4D printing of stimuli responsive materials

Jigar Patdiya et al.

Summary: Smart materials with sensing, memorizing, and changing capabilities have led to the development of 4D printing. This review article summarizes the progression of intelligent materials, important stimuli, multiple parameters, modeling of SMMs, filler interaction in SMCs, demand for 4D printing, and future challenges.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2021)

Add to Collection

Article Materials Science, Composites

Improving aramid pulp dispersion in epoxy resin via the in situ preparation of SiO2 on an aramid pulp surface

Haiquan Ding et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication, Applications, and Prospects of Aramid Nanofiber

Bin Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Polymer Science

Improving UV Resistance of Aramid Fibers by Simultaneously Synthesizing TiO2 on Their Surfaces and in the Interfaces Between Fibrils/Microfibrils Using Supercritical Carbon Dioxide

Hui Sun et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Physical

Supercritical CO2-induced nondestructive coordination between ZnO nanoparticles and aramid fiber with highly improved interfacial-adhesion properties and UV resistance

Luwei Zhang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Nondestructive growing nano-ZnO on aramid fibers to improve UV resistance and enhance interfacial strength in composites

Jingwei Zhang et al.

MATERIALS & DESIGN (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Development in Additive Methods in Aramid Fiber Surface Modification to Increase Fiber-Matrix Adhesion: A Review

Sarianna Palola et al.

COATINGS (2020)

Add to Collection

Article Materials Science, Composites

Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings

Jalal Nasser et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Polymer Science

Study on Surface Properties of Aramid Fiber Modified in Supercritical Carbon Dioxide by Glycidyl-POSS

Yang Li et al.

POLYMERS (2019)

Add to Collection

Article Polymer Science

Microstructural Changes of Aramid Fiber Due to Reaction with Toluene 2,4-diisocyanate under Tension in scCO(2)

Haijuan Kong et al.

POLYMERS (2019)

Add to Collection

Review Engineering, Multidisciplinary

Electroless nickel fabrication on surface modified magnesium substrates

Ayushi Thakur et al.

DEFENCE TECHNOLOGY (2019)

Add to Collection

Article Polymer Science

Growing Nano-SiO2 on the Surface of Aramid Fibers Assisted by Supercritical CO2 to Enhance the Thermal Stability, Interfacial Shear Strength, and UV Resistance

Luwei Zhang et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Physical

Improving the Mechanical and Surface Properties of Aramid Fiber by Grafting with 1,4-Dichlorobutane under Supercritical Carbon Dioxide

Chuyuan Jia et al.

MATERIALS (2019)

Add to Collection

Article Materials Science, Composites

Surface modification of Kevlar fiber by nanoSiO2 deposition in supercritical fluid

Min Li et al.

COMPOSITE INTERFACES (2019)

Add to Collection

Article Materials Science, Composites

Improvement of adhesion of kevlar fabrics to epoxy by surface modification with acetic anhydride in supercritical carbon dioxide

Kong Haijuan et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Surface modification of an aramid fiber via grafting epichlorohydrin assisted by supercritical CO2

Xiaoma Ding et al.

RSC ADVANCES (2019)

Add to Collection

Article Polymer Science

Ionic PMMA/nanosilica interfaces from grafting ionic liquids under supercritical CO2 conditions

Clarice Fedosse Zornio et al.

EUROPEAN POLYMER JOURNAL (2018)

Add to Collection

Article Physics, Applied

High strength fiber reinforced composites with surface fibrilized aramid fibers

Jalal Nasser et al.

JOURNAL OF APPLIED PHYSICS (2018)

Add to Collection

Article Engineering, Chemical

Encapsulation of anthocyanin-rich extract from blackberry residues by spray-drying, freeze-drying and supercritical antisolvent

Ana Paula da Fonseca Machado et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Crystallography

Surface modification and grafting of carbon fibers: A route to better interface

Nischith Raphael et al.

PROGRESS IN CRYSTAL GROWTH AND CHARACTERIZATION OF MATERIALS (2018)

Add to Collection

Review Engineering, Chemical

Functionalized Aramid Fibers and Composites for Protective Applications: A Review

Prakash M. Gore et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Quantitative Evolution of Wetting Phenomena for Super Hydrophobic Surfaces

Sandhya Padhi et al.

MATERIALS FOCUS (2018)

Add to Collection

Article Chemistry, Physical

Supercritical fluid extraction of emulsions to nanoencapsulate vitamin E in polycaprolactone

Cristina Prieto et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2017)

Add to Collection

Review Chemistry, Physical

Nanoparticle decoration with surfactants: Molecular intercations, assmbly, and applications

Hendrik Heinz et al.

SURFACE SCIENCE REPORTS (2017)

Add to Collection

Article Chemistry, Physical

Microwave induced hierarchical nanostructures on aramid fibers and their influence on adhesion properties in a rubber matrix

S. Palola et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Interfacial Strength and UV Shielding of Aramid Fiber Composites through ZnO Nanoparticle Sizing

Brendan A. Patterson et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Engineering, Chemical

Surface Modification of Aramid Fibers by Catechol/Polyamine Codeposition Followed by Silane Grafting for Enhanced Interfacial Adhesion to Rubber Matrix

Lei Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)

Add to Collection

Article Chemistry, Physical

Medroxyprogesterone-encapsulated poly(3-hydroxybutirate-co-3-hydroxyvalerate) nanoparticles using supercritical fluid extraction of emulsions

Willyan Machado Giufrida et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Application of online infrared spectroscopy to study the kinetics of precipitation polymerization of acrylic acid in supercritical carbon dioxide

Jean-Noel Ollagnier et al.

REACTION CHEMISTRY & ENGINEERING (2016)

Add to Collection

Article Chemistry, Physical

Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions

C. X. Wang et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Supercritical CO2 synthesized TiO2 nanowires covalently linked with core-shell CdS-ZnS quantum dots: enhanced photocatalysis and stability

Md Abdul Mumin et al.

RSC ADVANCES (2015)

Add to Collection

Article Polymer Science

Effect of treatment pressure on structures and properties of PMIA fiber in supercritical carbon dioxide fluid

Huanda Zheng et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Surface modification of poly(p-phenylene terephthalamide) fibers with HDI assisted by supercritical carbon dioxide

Kong Haijuan et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Physical

Ibuprofen-polymer precipitation using supercritical CO2 at low temperature

A. Montes et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneously improving the tensile strength and modulus of aramid fiber by enhancing amorphous phase in supercritical carbon dioxide

Haijuan Kong et al.

RSC ADVANCES (2014)

Add to Collection

Article Multidisciplinary Sciences

Advancement in Textile Technology for Defence Application

Balasubramanian Kandasubramanian et al.

DEFENCE SCIENCE JOURNAL (2013)

Add to Collection

Article Materials Science, Textiles

Application of Dithiol Compounds in Supercritical Carbon Dioxide to Improve the Adhesive Properties of Copper-Plated p-Aramid Fibers

Magali Belmas et al.

SEN-I GAKKAISHI (2010)

Add to Collection

Recent advancement in surface modification of aramid fiber assisted by supercritical carbon dioxide

Related references

Export Citation

Share Paper