Related references
Note: Only part of the references are listed.Poly (ethylene oxide) (PEO) influence on mechanical, thermal, and degradation properties of PLA/PBSeT blends
Sangwoo Kwon et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2023)
Advanced biopolymers for automobile and aviation engineering applications
Md Zillur Rahman et al.
JOURNAL OF POLYMER RESEARCH (2023)
The Potential of Cleaner Fermentation Processes for Bioplastic Production: A Narrative Review of Polyhydroxyalkanoates (PHA) and Polylactic Acid (PLA)
Tainara Rigotti de Castro et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)
Extending biopolyesters circularity by using natural stabilizers: A review on the potential of polyphenols to enhance Poly(hydroxyalkanoates) thermal stability while preserving its biodegradability
Chloe Bonnenfant et al.
POLYMER TESTING (2022)
Highly Flexible Polylactide Food Packaging Plasticized with Nontoxic, Biosourced Glycerol Plasticizers
Matthew W. Halloran et al.
ACS APPLIED POLYMER MATERIALS (2022)
The Potential of an Itaconic Acid Diester as Environmentally Friendly Plasticizer for Injection-Molded Polylactide Parts
Juan Ivorra-Martinez et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2022)
Recent advances and future prospects of cellulose, starch, chitosan, polylactic acid and polyhydroxyalkanoates for sustainable food packaging applications
Satti Venu Gopala Kumari et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)
Effect of maleic anhydride grafted poly(lactic acid) on rheological behaviors and mechanical performance of poly(lactic acid)/poly(ethylene glycol) (PLA/PEG) blends
Songting Yu et al.
RSC ADVANCES (2022)
Effect of Green Plasticizer on the Performance of Microcrystalline Cellulose/Polylactic Acid Biocomposites
Uttam C. Paul et al.
ACS APPLIED POLYMER MATERIALS (2021)
Ecofriendly biopolymers and composites: Preparation and their applications in water-treatment
Gowthama Prabu Udayakumar et al.
BIOTECHNOLOGY ADVANCES (2021)
Mechanical and thermal properties of poly(lactic acid) plasticized with dibutyl maleate and fumarate isomers: Promising alternatives as biodegradable plasticizers
Luana C. Llanes et al.
EUROPEAN POLYMER JOURNAL (2021)
Interfacial improvement of poly (lactic acid)/tannin acetate composites via radical initiated polymerization
Jingjing Liao et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Thermal behavior of PLA plasticized by commercial and cardanol-derived plasticizers and the effect on the mechanical properties
Antonio Greco et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)
Synthesis of high molecular weight L-Polylactic acid (PLA) by reactive extrusion at a pilot plant scale: Influence of 1,12-dodecanediol and di (trimethylol propane) as initiators
Sandra Viamonte-Aristizabal et al.
EUROPEAN POLYMER JOURNAL (2021)
Faba bean protein films reinforced with cellulose nanocrystals as edible food packaging material
Sandra Rojas-Lema et al.
FOOD HYDROCOLLOIDS (2021)
Advances in peroxide-initiated graft modification of thermoplastic biopolyesters by reactive extrusion
Praphulla Tiwary et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2021)
Interfacial improvements in cellulose nanofibers reinforced polylactide bionanocomposites prepared by in situ reactive extrusion
Feng-Jiao Li et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2021)
Ternary Poly(ethylene oxide)/Poly(L,L-lactide) PEO/PLA Blends as High-Temperature Solid Polymer Electrolytes for Lithium Batteries
Jorge L. Olmedo-Martinez et al.
ACS APPLIED POLYMER MATERIALS (2021)
Major factors affecting the characteristics of starch based biopolymer films
Shilpi Agarwal
EUROPEAN POLYMER JOURNAL (2021)
Comprehensive exploration of natural degradation of poly(lactic acid) blends in various degradation media: A review
Noor Afizah Rosli et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)
Synthetic Biopolymers and Their Composites: Advantages and Limitations-An Overview
Asanda Mtibe et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2021)
Biocompatibility and biodegradation of poly(lactic acid) (PLA) and an immiscible PLA/poly(ε-caprolactone) (PCL) blend compatibilized by poly(ε-caprolactone-b-tetrahydrofuran) implanted in horses
Julia R. G. Carvalho et al.
POLYMER JOURNAL (2020)
Recent progress in development and chemical modification of poly (hydroxybutyrate)-based blends for potential medical applications
Zulfiqar Ali Raza et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Modification of poly(lactic) acid by reactive extrusion and its melt blending with acrylonitrile-butadiene-styrene
Tobias Abt et al.
POLYMER INTERNATIONAL (2020)
A comprehensive review on chemical properties and applications of biopolymers and their composites
Ashish George et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
High performance branched poly(lactide) induced by reactive extrusion with low-content cyclic organic peroxide and multifunctional acrylate coagents
Peng Li et al.
POLYMER (2020)
Improvement of PLA film ductility by plasticization with epoxidized karanja oil
D. Garcia-Garcia et al.
POLYMER DEGRADATION AND STABILITY (2020)
Effect of Extrusion Screw Speed and Plasticizer Proportions on the Rheological, Thermal, Mechanical, Morphological and Superficial Properties of PLA
Jaime Galvez et al.
POLYMERS (2020)
Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?
Mariana Cristea et al.
MATERIALS (2020)
Mechanical and physical stability of polyhydroxyalkanoate (PHA)-based wood plastic composites (WPCs) under natural weathering
Clement Matthew Chan et al.
POLYMER TESTING (2019)
Migration of oligomers from a food contact biopolymer based on polylactic acid (PLA) and polyester
Sara Ubeda et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2019)
Mechanical recycling of poly(lactic acid): Evaluation of a chain extender and a peroxide as additives for upgrading the recycled plastic
Freddys R. Beltran et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Impact of ZnO nanoparticle morphology on relaxation and transport properties of PLA nanocomposites
Erlantz Lizundia et al.
POLYMER TESTING (2019)
Melt crystallization of PLA/Talc in fused filament fabrication
Wangwang Yu et al.
MATERIALS & DESIGN (2019)
3D printing of biopolymer nanocomposites for tissue engineering: Nanomaterials, processing and structure-function relation
Mahbub Hassan et al.
EUROPEAN POLYMER JOURNAL (2019)
Plasticization of Biodegradable Poly(Lactic Acid) by Different Triglyceride Molecular Sizes: A Comparative Study with Glycerol
Nawadon Petchwattana et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Disintegration in Compost Conditions and Water Uptake of Green Composites from Poly(Lactic Acid) and Hazelnut Shell Flour
J. F. Balart et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Enhanced thermal and mechanical properties of PLA/MoS2 nanocomposites synthesized via the in-situ ring-opening polymerization
Pengpeng Chen et al.
APPLIED SURFACE SCIENCE (2018)
Itaconic acid production in microorganisms
Meilin Zhao et al.
BIOTECHNOLOGY LETTERS (2018)
Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
A. Carbonell-Verdu et al.
EXPRESS POLYMER LETTERS (2018)
The crystallization behavior of poly(lactic acid) with different types of nucleating agents
Yongqi Feng et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
Changes of physical properties of PLA-based blends during early stage of biodegradation in compost
Michaela Sednickova et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites
Yinghui Zhou et al.
POLYMER TESTING (2018)
Accelerated ageing and hydrolytic stabilization of poly(lactic acid) (PLA) under humidity and temperature conditioning
A. Porfyris et al.
POLYMER TESTING (2018)
Effect of Dicumyl Peroxide on a Poly(lactic acid) (PLA)/Poly(butylene succinate) (PBS)/Functionalized Chitosan-Based Nanobiocomposite for Packaging: A Reactive Extrusion Study
Monika et al.
ACS OMEGA (2018)
Effect of Molding Conditions on Crystallization Kinetics and Mechanical Properties of Poly(lactic acid)
Felice De Santis et al.
POLYMER ENGINEERING AND SCIENCE (2017)
Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates
Chamaiporn Yamoum et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
PLA films with improved flexibility properties by using maleinized cottonseed oil
Alfredo Carbonell-Verdu et al.
EUROPEAN POLYMER JOURNAL (2017)
Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PTA)
Laura Aliotta et al.
EUROPEAN POLYMER JOURNAL (2017)
Resolving Inclusion Structure and Deformation Mechanisms in Polylactide Plasticized by Reactive Extrusion
Berit Bruester et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Petro-Based and Bio-Based Plasticizers: Chemical Structures to Plasticizing Properties
Maeva Bocque et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2016)
Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review
Shady Farah et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Influence of blending and blend morphology on the thermal properties and crystallization behaviour of PLA and PCL in PLA/PCL blends
A. S. Luyt et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Mechanical, thermal, and morphology properties of poly(lactic acid) plasticized with poly(ethylene glycol) and epoxidized palm oil hybrid plasticizer
Buong Woei Chieng et al.
POLYMER ENGINEERING AND SCIENCE (2016)
Isosorbide dioctoate as a green plasticizer for poly(lactic acid)
Yong Yang et al.
MATERIALS & DESIGN (2016)
Modification of poly(lactic acid) using itaconic anhydride by reactive extrusion
K. I. Ku Marsilla et al.
EUROPEAN POLYMER JOURNAL (2015)
Using viscoelastic properties to quantitatively estimate the amount of modified poly(lactic acid) chains through reactive extrusion
Jonathan Cailloux et al.
JOURNAL OF RHEOLOGY (2015)
Toughening of poly(lactide) using polyethylene glycol methyl ether acrylate: Reactive versus physical blending
Georgio Kfoury et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Rheological and Thermal Properties of Peroxide-Modified Poly for Blending Purposes
M. B. Khajeheian et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2015)
PLA maleation: an easy and effective method to modify the properties of PLA/PCL immiscible blends
Lorenza Gardella et al.
COLLOID AND POLYMER SCIENCE (2014)
Reactive extrusion of PLA, PBAT with a multi-functional epoxide: Physico-chemical and rheological properties
Racha Al-Itry et al.
EUROPEAN POLYMER JOURNAL (2014)
Tunable and Durable Toughening of Polylactide Materials Via Reactive Extrusion
Georgio Kfoury et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2014)
Synthetic Fibers and Thermoplastic Short-Fiber-Reinforced Polymers: Properties and Characterization
Christoph Unterweger et al.
POLYMER COMPOSITES (2014)
Tailoring polylactide (PLA) properties for automotive applications: Effect of addition of designed additives on main mechanical properties
D. Notta-Cuvier et al.
POLYMER TESTING (2014)
Green Composites Based on Wheat Gluten Matrix and Posidonia Oceanica Waste Fibers as Reinforcements
B. Ferrero et al.
POLYMER COMPOSITES (2013)
Comparison of the effects of commercial nucleation agents on the crystallization and melting behaviour of polylactide
Zongyan Gui et al.
POLYMER TESTING (2013)
Characterization of PLA-limonene blends for food packaging applications
Marina P. Arrieta et al.
POLYMER TESTING (2013)
Grafting of cellulose by ring-opening polymerisation - A review
Anna Carlmark et al.
EUROPEAN POLYMER JOURNAL (2012)
New development on plasticized poly(lactide): Chemical grafting of citrate on PLA by reactive extrusion
Fatima Hassouna et al.
EUROPEAN POLYMER JOURNAL (2012)
Fabrication of High Toughness Poly(lactic acid) by Combining Plasticization with Cross-linking Reaction
Zhongjie Ren et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Properties of linear poly(lactic acid)/polyethylene glycol blends
K. Sungsanit et al.
POLYMER ENGINEERING AND SCIENCE (2012)
New approach on the development of plasticized polylactide (PLA): Grafting of poly(ethylene glycol) (PEG) via reactive extrusion
Fatima Hassouna et al.
EUROPEAN POLYMER JOURNAL (2011)
Enhancing itaconic acid production by Aspergillus terreus
Gregor Tevz et al.
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2010)
Effect of nucleation and plasticization on the crystallization of poly(lactic acid)
Hongbo Li et al.
POLYMER (2007)
The plasticizer market: an assessment of traditional plasticizers and research trends to meet new challenges
M Rahman et al.
PROGRESS IN POLYMER SCIENCE (2004)