☆ 4.7 Article

Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

POLYMER TESTING (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Aerospace

Additive manufacturing of polyether ether ketone-based composites for space application: a mini-review

M. Rinaldi et al.

Summary: This paper discusses the potential value of high-performance thermoplastic polymers and their composites in space applications. Additive manufacturing enables the production of high-performance polymer parts, and customized functional properties can be achieved by mixing different fillers and additives.

CEAS SPACE JOURNAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

On the fully additive manufacturing of PC/AlSi10Mg hybrid structures

G. H. M. Oliveira et al.

Summary: The fabrication of strong and lightweight hybrid joints using polycarbonate and AlSi10Mg aluminum alloy entirely through additive manufacturing was successfully demonstrated. The structures on the metal surface were properly filled with polymer, ensuring good interfacial adhesion.

MATERIALS LETTERS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Fatigue life assessment and fracture mechanisms of additively manufactured metal-fiber reinforced thermoplastic hybrid structures produced via ultrasonic joining

Willian S. de Carvalho et al.

Summary: This study evaluates the fatigue performance of additive manufactured 316L stainless steel/PEEK-20CF hybrid joints through experiments and numerical simulations. The results show that the joints can reach a fatigue life of one million cycles when subjected to 42% of the maximum load, demonstrating high mechanical performance and potential for engineering applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Automation & Control Systems

Multi-parameter optimization of PLA/Coconut wood compound for Fused Filament Fabrication using Robust Design

John D. Kechagias et al.

Summary: This study investigates the effects of four variables on the strength and elasticity modulus of printed parts during fused filament fabrication of organic biocompatible composite material. The results showed that the raster deposition angle dominates among the other variables in the studied experimental area.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Properties and Characterization of Polylactic Acid/Carbon Fiber Composite Fabricated by Fused Deposition Modeling

K. Ravi Kumar et al.

Summary: In this study, the mechanical properties of polylactic acid/carbon fiber composites were investigated by reinforcing carbon fiber in polylactic acid composites using fused deposition modeling. The mechanical properties were analyzed by varying layer thickness, raster angle, infill density, and printing speed. Impact strength, tensile strength, and flexural strength tests were carried out to examine the mechanical properties of the composites. Mathematical models were developed to estimate the impact strength, tensile strength, and flexural strength of the PLA/carbon composites. The fracture mechanism of the composite specimens was influenced by voids, cracks, infill gaps, and interfaces.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Optics

A multimodal optical approach for investigating 3D-printed carbon PEEK composites

V Pagliarulo et al.

Summary: The study demonstrates how a multimodal approach using full-field and non-contact optical techniques, coupled with SEM and optical microscopy, can provide a comprehensive characterization of reinforced composites produced with 3D printing technology during and after tensile and flexural tests.

OPTICS AND LASERS IN ENGINEERING (2022)

Add to Collection

Article Polymer Science

Fused-Filament Fabrication of Short Carbon Fiber-Reinforced Polyamide: Parameter Optimization for Improved Performance under Uniaxial Tensile Loading

Carlos Belei et al.

Summary: This study aims to improve the Fused-Filament Fabrication (FFF) of short-fiber-reinforced polyamides by optimizing process parameters. Two approaches, traditional design of experiments (DoE) and machine learning (ML), were used. ML-based model predicted responses with higher accuracy, while DoE performed slightly better in predicting higher response values. The study also identified influential parameters and their correlation with the mechanical performance of the printed parts.

POLYMERS (2022)

Add to Collection

Article Engineering, Mechanical

Modeling and optimization of flexural properties of FDM-processed PET-G specimens using RSM and GWO algorithm

Nikolaos A. Fountas et al.

Summary: The influence of FDM-related parameters on the flexural strength of PET-G was investigated in this study. A response surface experiment and statistical analysis were used to determine the optimal parameter settings, which were then implemented in the grey wolf algorithm for achieving higher flexural strength.

ENGINEERING FAILURE ANALYSIS (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The Influence of Coating and Adhesive Layers on the Mechanical Performance of Additively Manufactured Aluminum–Polymer Hybrid Joints

Rielson Falck et al.

Metals (2022)

Add to Collection

Article Chemistry, Physical

Roadmap: Numerical-Experimental Investigation and Optimization of 3D-Printed Parts Using Response Surface Methodology

Hamid Reza Vanaei et al.

Summary: By considering important variables, such as temperature and mechanical characteristics, the fused filament fabrication process can be optimized. Through numerical-experimental methods, the influence of variables on product quality was investigated. By applying the optimized data, favorable adhesion and improved process quality can be achieved in the FFF process.

MATERIALS (2022)

Add to Collection

Article Engineering, Manufacturing

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

Han Qu et al.

Summary: This study investigates the thermodynamic properties of thin-structure PEEK samples printed under various conditions. The results show that appropriate substrate temperature can significantly improve the mechanical and thermal properties of PEEK material.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Aerospace

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/ PEEK and GF/PEEK

Peng Wang et al.

Summary: FDM offers unique advantages in rapid prototyping, with enhanced mechanical properties achieved through the use of fiber reinforcement composites. Research shows that adjusting printing parameters can significantly improve the mechanical properties of printed parts.

CHINESE JOURNAL OF AERONAUTICS (2021)

Add to Collection

Article Polymer Science

Experimental investigation and optimization of printing parameters of3Dprinted polyphenylene sulfide through response surface methodology

Anouar El Magri et al.

Summary: Fused filament fabrication is currently widely used for high performance materials manufacturing, with polyphenylene sulfide chosen as the base material in this study. Optimizing parameters such as nozzle temperature, printing speed, and layer thickness significantly improved the output responses. Additionally, annealing the printed PPS parts at 200 degrees Celsius for 1 hour enhanced their thermal, structural, and tensile properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

The Influence of Tool Wear on the Mechanical Performance of AA6061-T6 Refill Friction Stir Spot Welds

Willian S. de Carvalho et al.

Summary: The study optimized welding parameters through Design of Experiments (DoE) to find the best conditions for the RFSSW tool used for AA6061-T6 alloy, and evaluated the impact of tool wear on welding mechanical performance.

MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on voids of 3D printed parts by fused filament fabrication

Yubo Tao et al.

Summary: Fused filament fabrication (FFF), also known as fused deposition modeling (FDMTM), has gained considerable attention for its versatility, reliability, and affordability, but faces challenges in fabricating durable, performing, and functional parts. The presence of voids leads to weak mechanical properties in FFF-printed parts, highlighting the importance of understanding the challenges presented by void formation.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Review Polymer Science

Semi-crystalline feedstock for filament-based 3D printing of polymers

Dries Vaes et al.

Summary: This review focuses on the processing characteristics and factors affecting semi-crystalline polymers in Fused Filament Fabrication (FFF), highlighting the impact of processing conditions, feedstock modifications, and microstructure on mechanical performance and part quality. Specific phenomena during the printing process are discussed, along with a critical outlook on future research challenges when using semi-crystalline polymers as FFF feedstock.

PROGRESS IN POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

M. F. Arif et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Review Engineering, Multidisciplinary

Current status of carbon fibre and carbon fibre composites recycling

Jin Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Peng Wang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Recent developments in polymers/polymer nanocomposites for additive manufacturing

H. Wu et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Review Polymer Science

Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships

Ali Reza Zanjanijam et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Manufacturing

Extruded diameter dependence on temperature and velocity in the fused deposition modeling process

Mouhamadou Mansour Mbow et al.

PROGRESS IN ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Polymer Science

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

Qiushi Li et al.

POLYMERS (2019)

Add to Collection

Article Engineering, Mechanical

Fused deposition modeling with polyamide 1012

Xia Gao et al.

RAPID PROTOTYPING JOURNAL (2019)

Add to Collection

Article Materials Science, Composites

Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties

J. M. Chacon et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

PEEK materials as an alternative to titanium in dental implants: A systematic review

Sunil Mishra et al.

CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2019)

Add to Collection

Article Automation & Control Systems

3D Printing in Zero G Technology Demonstration Mission: complete experimental results and summary of related material modeling efforts

Tracie Prater et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Automation & Control Systems

Impact of fused deposition modeling (FDM) process parameters on strength of built parts using Taguchi's design of experiments

Uzair Khaleeq Uz Zaman et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Review Engineering, Multidisciplinary

Recent advances in carbon-fiber-reinforced thermoplastic composites: A review

Shan-Shan Yao et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Materials Science, Composites

3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties

A. A. Stepashkin et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics

G. D. Goh et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Chemistry, Physical

Fundamentals of Force-Controlled Friction Riveting: Part II-Joint Global Mechanical Performance and Energy Efficiency

Goncalo Pina Cipriano et al.

MATERIALS (2018)

Add to Collection

Article Engineering, Mechanical

Additive manufacturing in the context of structural integrity

Michael Gorelik

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Article Materials Science, Characterization & Testing

Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites

S. Berretta et al.

POLYMER TESTING (2017)

Add to Collection

Review Mechanics

A review on additive manufacturing of polymer-fiber composites

Pedram Parandoush et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Multidisciplinary

Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling

Fuda Ning et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Materials Science, Composites

Highly oriented carbon fiber-polymer composites via additive manufacturing

Halil L. Tekinalp et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Engineering, Biomedical

Coating of carbon fiber-reinforced polyetheretherketone implants with titanium to improve bone apposition

Declan M. Devine et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)

Add to Collection

Article Polymer Science

Investigation of the thermal decomposition and flammability of PEEK and its carbon and glass-fibre composites

Parina Patel et al.

POLYMER DEGRADATION AND STABILITY (2011)

Add to Collection

Article Polymer Science

Properties of High Modulus PEEK Yarns for Aerospace Applications

R. Indu Shekar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection

Article Engineering, Mechanical

Effect of processing conditions on the bonding quality of FDM polymer filaments

Q. Sun et al.

RAPID PROTOTYPING JOURNAL (2008)

Add to Collection

Review Engineering, Biomedical

PEEK biomaterials in trauma, orthopedic, and spinal implants

Steven M. Kurtz et al.

BIOMATERIALS (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.