☆ 4.5 Article

Synthesis of copolymer nanocomposite by in situ intercalative polymerization for batch and fixed bed adsorption

POLYMER ENGINEERING AND SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Enhancing the adsorption affinity of cellulose acetate film toward cationic dye by incorporating Cloisite 30B grafted with polyacrylic acid

Heba Kandil et al.

Summary: Cellulose acetate (CA) has low adsorption affinity toward dyes, but this study successfully improved its adsorption capacity for cationic dyes by introducing Cloisite 30B grafted with polyacrylic acid (C30B-g-PAA). The prepared CA nanocomposite films with 50 wt% C30B-g-PAA showed a significant increase in adsorption capacity for cationic methylene blue (MB) dye, demonstrating the effectiveness of surface modification. The film followed pseudo-second-order kinetics and Langmuir isotherm model, and showed good regenerability.

POLYMER ENGINEERING AND SCIENCE (2023)

Add to Collection

Article Engineering, Chemical

Adsorption and photocatalytic degradation of tetracycline from water by kappa-carrageenan and iron oxide nanoparticle-filled poly (acrylonitrile-co-N-vinyl pyrrolidone) composite gel

Bidyut Kumar Bhangi et al.

Summary: In this study, magnetic hydrogels based on iron oxide nanoparticles were prepared by in-situ co-precipitation of ferric/ferrous salts during copolymerization of acrylonitrile and N-vinyl-2-pyrrolidone. The nanocomposite gels showed high adsorption and photocatalytic degradation efficiency for tetracycline removal from water.

POLYMER ENGINEERING AND SCIENCE (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Developments in the Removal of Dyes from Water by Starch-Based Adsorbents

Ihsanullah Ihsanullah et al.

Summary: This review critically evaluates the recent progress in the application of starch-based adsorbents for dye removal, highlighting the key challenges in synthesis and application. The findings provide insights for the development of sustainable water treatment options in the future.

CHEMICAL RECORD (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Sorption thermodynamics and coupling effect for pervaporative dehydration of acetone through nanoclay and iron nanoparticle-filled copolymer membranes

Swastika Choudhury et al.

Summary: In this study, NaMMT nanoclay and FeNP nanoparticles were incorporated in-situ in the copolymer matrix, and their effects on membrane properties were investigated. The results showed that the filled membranes exhibited high selectivity and flux for dehydration of acetone.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2022)

Add to Collection

Article Polymer Science

Comparative strategy between masterly flow improver and its nanocomposite

H. I. Al-Shafey et al.

Summary: A comparative study was conducted on the beneficial terpolymer (TP) and its polymer nanocomposite (PNC) as flow improvers for diesel fuel and lube oil. Results showed that PNC had superior performance in improving pour point temperature, viscosity index, and reducing plastic viscosity compared to TP.

POLYMER BULLETIN (2022)

Add to Collection

Article Biotechnology & Applied Microbiology

Modeling of linear alkyl benzene sulphonic acid removal from aqueous solution with fixed bed adsorption column: Thomas and Yoon-Nelson methods

Begum Belat et al.

Summary: This study investigates the removal of Linear Alkyl Benzene Sulphonic Acid synthetic solution using a fixed-bed adsorption column system embedded with a composite of polyaniline-supported activated walnut shell. The results show that this adsorbent has a high potential for detergent and COD adsorption from anionic aqueous solutions, making it a good alternative for pretreatment.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2022)

Add to Collection

Article Polymer Science

In situ polymerization of styrene-clay nanocomposites and their properties

Lahouari Mrah et al.

Summary: This study focused on the preparation and characterization of polystyrene/organoclay nanocomposites. By modifying the clay with cetyltrimethylammonium bromide and synthesizing nanocomposites through in situ mass polymerization, significant improvements in thermal stability and mechanical properties were achieved. The morphological and performance enhancements of the nanocomposites were confirmed through various analytical techniques.

POLYMER BULLETIN (2021)

Add to Collection

Article Engineering, Chemical

Effect of tacticity of poly(methyl methacrylate) on interfacial region with silica in polymer nanocomposite

Kazuki Matsuura et al.

Summary: This study demonstrated that different molecular tacticity has distinct effects on the interfacial region between PMMA/silica nanocomposites, affecting the glass transition temperature and molecular chain mobility.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Synthesis of polymer nanoparticles based highly selective membranes by mini-emulsion polymerization for dehydration of 1,4 dioxane and recovery of ethanol from water by pervaporation

Swastika Choudhury et al.

Summary: The addition of polymer nanoparticles significantly enhances the separation characteristics of polymer membranes for various applications, providing improved flux and selectivity. The use of low cost chitosan-coated polyacrylonitrile nanoparticles presents a promising alternative to expensive inorganic nanoparticles for membrane modification.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Adsorption of methylene blue onto chitosan?montmorillonite/ polyaniline nanocomposite

Islam M. Minisy et al.

Summary: In this study, an eco-friendly adsorbent of chitosan-montmorillonite/polyaniline nanocomposite was synthesized and used for methylene blue removal from aqueous solutions. The polyaniline base composite proved to be a better dye adsorbent and exhibited a maximum adsorption capacity of 111 mg g-1.

APPLIED CLAY SCIENCE (2021)

Add to Collection

Article Chemistry, Applied

Synthesis of chitosan grafted polymethyl methacrylate nanopolymers and its effect on polyvinyl chloride membrane for acetone recovery by pervaporation

Amritanshu Banerjee et al.

Summary: Biopolymer nanoparticles based on chitosan offer a cost-effective, non-toxic alternative to traditional nanoparticles, and are more compatible with polymer membranes. Chitosan, as a cationic polymer surfactant, helps generate polymer nanoparticles for improving the organophilicity of PVC membranes. The membranes prepared with chitosan grafted PMMA nanopolymers showed enhanced performance in terms of acetone flux and selectivity, fitting closely to ENSIC and solution-diffusion model for sorption and pervaporation data, respectively.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Chemical

Synthesis, characterization, and adsorption properties of collagen and attapulgite-filled copolymer biocomposites: Batch and column studies

Swastika Choudhury et al.

Summary: Biocomposites synthesized with optimized composition showed high adsorption capacity for dye removal, indicating potential applications in efficient wastewater treatment.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Review Engineering, Environmental

Adsorption of Dyes Using Poly(vinyl alcohol) (PVA) and PVA-Based Polymer Composite Adsorbents: A Review

Chun Fah Mok et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Add to Collection

Article Chemistry, Applied

Combination effect of organically modified montmorillonite and nano-silica on reducing the fire hazards of intumescent flame-retarded epoxy resins

Long Yan et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2020)

Add to Collection

Article Polymer Science

Ammonium nitrogen adsorption from aqueous solution by poly(sodium acrylate)s: Effect on the amount of crosslinker and initiator

I-Chi Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Green synthesis of iron oxide nanoparticle using Carica papaya leaf extract: application for photocatalytic degradation of remazol yellow RR dye and antibacterial activity

Md. Shakhawat Hossen Bhuiyan et al.

HELIYON (2020)

Add to Collection

Article Engineering, Chemical

Preparation of partially neutralized poly(acrylic acid) microspheres via inverse pickering suspension polymerization

Ozgur Ceylan et al.

POLYMER ENGINEERING AND SCIENCE (2019)

Add to Collection

Article Polymer Science

Sorption behavior of polyvinyl alcohol/bentonite hydrogels for dyes removal

Laura M. Sanchez et al.

JOURNAL OF POLYMER RESEARCH (2019)

Add to Collection

Article Materials Science, Composites

Magnetic Graphene Oxide Grafted With Different Hydrophobic Chain Lengths Low-Generation Polyamidoamine Dendrimers for Adsorption of Pb(II) and Hg(II) in Aqueous Solution

Ying-Xia Ma et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Engineering, Chemical

Adsorptive polyHIPE composites based on biosorbent immobilized nanoclay: Effects of immobilization techniques

Hatice Hande Mert et al.

POLYMER ENGINEERING AND SCIENCE (2018)

Add to Collection

Review Materials Science, Composites

Materials, Preparation, and Characterization of PVA/MMT Nanocomposite Hydrogels: A Review

Ali Karimi et al.

POLYMER COMPOSITES (2017)

Add to Collection

Article Engineering, Chemical

Synthesis of the poly(acrylic acid-acrylic sodium) bentonite composite and its adsorption of Cd(II)

Xinling You et al.

ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2017)

Add to Collection

Article Materials Science, Composites

Preparation of polymer/clay nanocomposites via melt intercalation under continuous elongation flow

Guizhen Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Composites

Synthesis and Characterization of Hybrid Clay/Poly (N,N-dimethylaminoethyl methacrylate) Nanocomposites

Yasser Assem et al.

POLYMER COMPOSITES (2016)

Add to Collection

Article Multidisciplinary Sciences

Improvement of vibrodamping properties of polyvinyl acetate-graphite composites by electron beam processing of the filler

Sergey V. Mjakin et al.

SPRINGERPLUS (2016)

Add to Collection

Article Polymer Science

Semi-Continuous Heterophase Polymerization to Synthesize Nanocomposites of Poly(acrylic acid)-Functionalized Carbon Nanotubes

J. M. Silva-Jara et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Eco-friendly and cost-effective superabsorbent sodium polyacrylate composites for environmental remediation

Yang Yu et al.

JOURNAL OF MATERIALS SCIENCE (2015)

Add to Collection

Article Materials Science, Biomaterials

Swelling, diffusion, network parameters and adsorption properties of IPN hydrogel of chitosan and acrylic copolymer

Bidyadhar Mandal et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)

Add to Collection

Article Polymer Science

Synthesis of full and semi Interpenetrating hydrogel from polyvinyl alcohol and poly (acrylic acid-co-hydroxyethylmethacrylate) copolymer: Study of swelling behavior, network parameters, and dye uptake properties

Bidyadhar Mandal et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection

Article Engineering, Chemical

Systematic choice of crosslinker and filler for pervaporation membrane: A case study with dehydration of isopropyl alcohol-water mixtures by polyvinyl alcohol membranes

Paramita Das et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2011)

Add to Collection

Article Pharmacology & Pharmacy

Design of psyllium-PVA-acrylic acid based novel hydrogels for use in antibiotic drug delivery

Baljit Singh et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2010)

Add to Collection

Article Polymer Science

Synthesis of polylactide/clay nanocomposites by in situ intercalative polymerization in supercritical carbon dioxide

Laetitia Urbanczyk et al.

EUROPEAN POLYMER JOURNAL (2009)

Add to Collection

Article Materials Science, Multidisciplinary

The preparation and properties of sodium and organomodified-montmorillonite/polypyrrole composites:: A comparative study

Miroslava Mravcakova et al.

SYNTHETIC METALS (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Conducting semi-IPN based on polyaniline and crosslinked poly(vinyl alcohol)

R Gangopadhyay et al.

SYNTHETIC METALS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.