4.7 Review

Recent progress in the accelerated aging and lifetime prediction of elastomers : A review

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Synthesis and characterization of poly(p-dioxanone)-based degradable copolymers with enhanced thermal and hydrolytic stabilities

Yi-Teng Yan et al.

Summary: A novel biodegradable copolymer was synthesized via chain extending reaction, and its structure, molecular weight, thermal stability, mechanical properties, and hydrolytic degradation behaviors were investigated.

CHINESE CHEMICAL LETTERS (2022)

Article Materials Science, Multidisciplinary

On the use of Ozawa/Flynn/Wall method to determine aging activation energy for elastomers

Sudhir Bafna

Summary: It is often necessary to assess the effect of aging on hardware containing elastomeric components over years/decades at room temperature. Accelerated aging at elevated temperatures is pursued, but the use of ThermoGravimetric Analysis to determine activation energy may lead to unrealistically high values. This could result in incorrect predictions of storage life at room temperature.

JOURNAL OF ELASTOMERS AND PLASTICS (2022)

Article Energy & Fuels

The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications

Farzaneh Hassani et al.

Summary: Hydrogenated nitrile butyl rubber (HNBR) elastomers are highly resistant to chemicals and degradation, making them ideal for applications in aggressive environmental conditions. This study investigated the thermal ageing behavior of HNBR elastomers and found that up to 150 degrees C, crosslinking reactions dominate, leading to increased stiffness, while above 150 degrees C, chain scission reactions result in brittle behavior of the compounds. Ultimately, ageing above 150 degrees C facilitates rupture due to the brittle response of the compounds, which contrasts with the elastic failure promoted by long-term ageing.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Article Polymer Science

Durability and Service Life Prediction of Fluorocarbon Elastomer under Thermal Environments

Pyoung-Chan Lee et al.

Summary: This study investigated the service life prediction of fluorocarbon elastomers used in automotive vapor fuel hoses under thermal environments. The changes in mechanical properties such as tensile strength, elongation, compression set, and hardness due to thermal aging were examined. The study found that destructive tests of tensile strength and elongation showed significant variations in mechanical properties, while nondestructive tests of compression set and hardness showed little variations. The physical parameters of elongation, compression set, and hardness were selected for service life prediction, as they exhibited a tendency according to aging temperature. The effective activation energy ranged from 74.91 to 159.6 kJ mol(-1), and the service life ranged from 17.8 to 140 x 10(3) h based on B-10. Hardness was considered an appropriate mechanical parameter for predicting service lifetime due to its small deviation between samples.

POLYMERS (2022)

Review Environmental Sciences

Understanding plastic degradation and microplastic formation in the environment: A review

Kai Zhang et al.

Summary: Plastic waste pollution is a global issue that poses a potential threat to ecosystems and human health, but knowledge on plastic environmental degradation and microplastic formation is still limited. Future research should further study the key factors influencing plastic degradation to predict the fate of plastics in different environments.

ENVIRONMENTAL POLLUTION (2021)

Article Materials Science, Characterization & Testing

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing

Bo Li et al.

Summary: This study investigates the effects of thermal oxidation ageing on NBR seals, showing that it significantly impacts the rubber properties such as hardness, bulk modulus, tensile strength, and tear strength. Different ageing degrees result in distinct damage mechanisms, with the wear mechanism shifting gradually from adhesive wear to abrasive wear or fatigue and abrasive wear. Despite a decrease in average wear rate with increased ageing parameters, important mechanical properties like viscoelasticity and fracture resistance are severely reduced or lost entirely due to ageing degradation.

POLYMER TESTING (2021)

Review Environmental Sciences

Degradation of conventional plastic wastes in the environment: A review on current status of knowledge and future perspectives of disposal

Sameh Samir Ali et al.

Summary: The accumulation of plastic waste is recognized as a critical environmental challenge globally, prompting the search for alternative solutions such as biodegradation. However, limited knowledge exists on the mechanisms and efficiency of plastic biodegradation.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Polymer Science

Volume Resistivity of Viton Polymer under Thermal Aging

Alireza Abdihamzehkolaei et al.

Summary: This study investigates the influence of various electrical parameters on the volume resistivity of Viton fluoroelastomer and compares new and aged samples. The results show that both new and aged samples exhibit decreased resistivity with increasing temperature, with aged samples consistently showing lower resistivity. Additionally, the study found that volume resistivity is inversely proportional to the applied voltage and aging leads to higher surface roughness and cracks on Viton samples, impacting performance under high voltage applications.

POLYMERS (2021)

Review Energy & Fuels

Application and Suitability of Polymeric Materials as Insulators in Electrical Equipment

S. K. Manirul Haque et al.

Summary: This paper reviews the applications of thermoplastic, thermoset polymers and their functions, presents the synthetic routes and characteristics of polymeric materials, discusses their mechanical and thermal properties, as well as their electrical behavior for insulation purposes. The evolution, limitations, advantages, and future trends of polymeric materials in electrical applications are also mentioned, along with the need for developing new techniques to reduce costs and improve technical properties.

ENERGIES (2021)

Article Polymer Science

The use of crude carbon dots as novel antioxidants for natural rubber

Shanshan Huangfu et al.

Summary: This study demonstrates the use of amine-passivated crude carbon dots as antioxidants to extend the service life of natural rubber, directly incorporating carbon dots into rubber through a simple method. Experimental results show that well-dispersed crude carbon dots exhibit impressive antioxidative properties in NR.

POLYMER DEGRADATION AND STABILITY (2021)

Article Polymer Science

Study on the ozone aging mechanism of Natural Rubber

Tingting Zheng et al.

Summary: This study systematically investigated the ozone aging mechanism of natural rubber, revealing the generation of three newly-discovered free radicals during the aging process, which ultimately led to weakened mechanical properties.

POLYMER DEGRADATION AND STABILITY (2021)

Article Polymer Science

Phlogopite-Reinforced Natural Rubber (NR)/Ethylene-Propylene-Diene Monomer Rubber (EPDM) Composites with Aminosilane Compatibilizer

Sung-Hun Lee et al.

Summary: Rubber compounding with two or more components, such as the addition of phlogopite mineral filler and the compatibilization of AEAPS and SA, has been shown to improve the properties of NR/EPDM blends. The NR/EPDM/phlogopite composite exhibited enhanced mechanical, curing, elastic, and morphological properties compared to NR/EPDM/silica, but showed slightly lower abrasion resistance than NR/EPDM/carbon black. This rubber composite has the potential to replace expensive fillers in various applications.

POLYMERS (2021)

Article Polymer Science

Thermo-oxidative ageing of a SBR rubber: effects on mechanical and chemical properties

Naima Rezig et al.

JOURNAL OF POLYMER RESEARCH (2020)

Article Polymer Science

Insights for lifetime predictions of O-ring seals from five-year long-term aging tests

Anja Koemmling et al.

POLYMER DEGRADATION AND STABILITY (2020)

Article Engineering, Environmental

The Effect of Polyurethane Glycolysate on the Structure and Properties of Natural Rubber/Carbon Black Composites

Marcin Wloch et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)

Article Polymer Science

CHEMO-MECHANICAL MODEL FOR PREDICTING THE LIFETIME OF EPDM RUBBERS

Xavier Colin et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2019)

Article Chemistry, Physical

Immobilization of rubber additive on graphene for high-performance rubber composites

Bangchao Zhong et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Polymer Science

Mesoporous silica as nanocarrier of antioxidant for highly anti-aging elastomer composites

Dechao Hu et al.

POLYMER DEGRADATION AND STABILITY (2019)

Article Engineering, Electrical & Electronic

Research on property variation of silicone rubber and EPDM rubber under interfacial multi-stresses

Ying Liu et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2019)

Article Materials Science, Characterization & Testing

Rubber accelerated ageing life prediction by Peck model considering initial hardness influence

Qiaobin Liu et al.

POLYMER TESTING (2019)

Article Materials Science, Composites

Butyl Rubber-Based Composite: Thermal Degradation and Prediction of Service Lifetime

Phuong Nguyen-Tri et al.

JOURNAL OF COMPOSITES SCIENCE (2019)

Article Materials Science, Multidisciplinary

Thermo-oxidative aging resistance and mechanism of a macromolecular hindered phenol antioxidant for natural rubber

Wenjian Wu et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2018)

Article Polymer Science

Effect of ZnO particle sizes on thermal aging behavior of natural rubber vulcanizates

Yong Hwan Lee et al.

POLYMER DEGRADATION AND STABILITY (2018)

Article Materials Science, Characterization & Testing

Comparative study on different methods for determination of activation energies of nuclear cable materials

Yi Gong et al.

POLYMER TESTING (2018)

Article Polymer Science

Mechanical, Thermal, and Morphological Behavior of Silicone Rubber during Accelerated Aging

Sima Kashi et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

Article Polymer Science

Accelerated Aging and Lifetime Prediction of Graphene-Reinforced Natural Rubber Composites

Eunjoo Kong et al.

MACROMOLECULAR RESEARCH (2018)

Review Construction & Building Technology

Material properties of the seal gasket for shield tunnels: A review

Chen Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Electrochemistry

Nanocomposite Coatings: Preparation, Characterization, Properties, and Applications

Phuong Nguyen-Tri et al.

INTERNATIONAL JOURNAL OF CORROSION (2018)

Article Engineering, Electrical & Electronic

Effects of Mechanical Stress on Treeing Growth Characteristics in HTV Silicone Rubber

B. X. Du et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2017)

Article Materials Science, Multidisciplinary

Service Lifetime Estimation of EPDM Rubber Based on Accelerated Aging Tests

Jie Liu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

Article Polymer Science

Thermal oxidation ageing effects on silicone rubber sealing performance

Jian Wu et al.

POLYMER DEGRADATION AND STABILITY (2017)

Article Polymer Science

Preparation of halloysite nanotubes loaded antioxidant and its antioxidative behaviour in natural rubber

Bangchao Zhong et al.

POLYMER DEGRADATION AND STABILITY (2017)

Article Materials Science, Characterization & Testing

Aging properties of styrene-butadiene rubber nanocomposites filled with carbon black and rectorite

Shaojian He et al.

POLYMER TESTING (2017)

Article Engineering, Environmental

Antioxidant sustained release from carbon nanotubes for preparation of highly aging resistant rubber

Ye Fu et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Proceedings Paper Polymer Science

Influence of Ageing on Sealability of Elastomeric O-Rings

Anja Koemmling et al.

MACROMOLECULAR SYMPOSIA (2017)

Article Polymer Science

Effects of heterogeneous aging in compressed HNBR and EPDM O-ring seals

Anja Koemmling et al.

POLYMER DEGRADATION AND STABILITY (2016)

Article Polymer Science

Antioxidative behavior of a novel samarium complex in styrene-butadiene rubber/silica composites

Yongkun Zou et al.

POLYMER DEGRADATION AND STABILITY (2016)

Article Materials Science, Characterization & Testing

Revealing effects of chain scission during ageing of EPDM rubber using relaxation and recovery experiment

Anja Koemmling et al.

POLYMER TESTING (2016)

Article Materials Science, Characterization & Testing

Effects of accelerated aging on mechanical, thermal and morphological behavior of polyurethane/epoxy/fiberglass composites

Alexandre de Souza Rios et al.

POLYMER TESTING (2016)

Article Nanoscience & Nanotechnology

Highly Aging-Resistant Elastomers Doped with Antioxidant-Loaded Clay Nanotubes

Ye Fu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Engineering, Electrical & Electronic

Physico-Chemical Study of Thermally Aged EPDM Used in Power Cables Insulation

D. Bouguedad et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2015)

Article Polymer Science

CHALLENGES OF ACCELERATED AGING TECHNIQUES FOR ELASTOMER LIFETIME PREDICTIONS

K. T. Gillen et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2015)

Article Chemistry, Multidisciplinary

Effect of nanosilica-based immobile antioxidant on thermal oxidative degradation of SBR

Haitao Wei et al.

RSC ADVANCES (2015)

Review Chemistry, Analytical

Pathways for degradation of plastic polymers floating in the marine environment

Berit Gewert et al.

ENVIRONMENTAL SCIENCE-PROCESSES & IMPACTS (2015)

Article Chemistry, Physical

Graphene as a prominent antioxidant for diolefin elastomers

Maozhu Tang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Multidisciplinary Sciences

Hybrid composites prepared from Industrial waste: Mechanical and swelling behavior

Khalil Ahmed

JOURNAL OF ADVANCED RESEARCH (2015)

Article Thermodynamics

Thermogravimetric studies of styrene-butadiene rubber (SBR) after accelerated thermal aging

Kewei Xiang et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

Article Materials Science, Composites

Improved oxidation resistance of conducting polychloroprene composites

Kalaivani Subramaniam et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Article Engineering, Electrical & Electronic

Lifetime Prediction of HV Silicone Rubber Insulators based on Mechanical Tests after Thermal Ageing

Mitra Khiabani Moghadam et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2013)

Article Polymer Science

Effect of nanoclay content and matrix composition on properties and stress-strain behavior of NR/EPDM nanocomposites

Abdolmajid Alipour et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Article Materials Science, Composites

Synthesis of Nanosilica-Based Immobile Antioxidant and Its Antioxidative Efficiency in SBR Composites

Lili Guo et al.

POLYMER COMPOSITES (2013)

Review Polymer Science

Review of polymer oxidation and its relationship with materials performance and lifetime prediction

Mathew C. Celina

POLYMER DEGRADATION AND STABILITY (2013)

Article Materials Science, Characterization & Testing

TGA application for optimising the accelerated aging conditions and predictions of thermal aging of rubber

Elena V. Bystritskaya et al.

POLYMER TESTING (2013)

Article Chemistry, Physical

Study on the lifetime of EPDM seals in nuclear-powered vessels

F. Le Lay

RADIATION PHYSICS AND CHEMISTRY (2013)

Article Polymer Science

CHANGES OF CHEMICAL STRUCTURE AND MECHANICAL PROPERTY LEVELS DURING THERMO-OXIDATIVE AGING OF NBR

Jiaohong Zhao et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2013)

Article Polymer Science

Comparative study on natural antioxidant as an aging retardant for natural rubber vulcanizates

M. Komethi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Article Chemistry, Multidisciplinary

Lifetime prediction and thermal aging behaviors of SBR and NBR composites using crosslink density changes

Sung-Seen Choi et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2012)

Article Polymer Science

Accelerated thermal ageing studies of polydimethylsiloxane (PDMS) rubber

Kewei Xiang et al.

JOURNAL OF POLYMER RESEARCH (2012)

Article Mechanics

Influence of thermal aging on tensile and creep behavior of thermoplastic polyurethane

A. Boubakri et al.

COMPTES RENDUS MECANIQUE (2011)

Article Engineering, Mechanical

Useful lifetime prediction of rubber component

Chang Su Woo et al.

ENGINEERING FAILURE ANALYSIS (2011)

Article Chemistry, Multidisciplinary

Chlorine Effect on Thermal Aging Behaviors of BR and CR Composites

Sung-Seen Choi et al.

BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2010)

Article Materials Science, Multidisciplinary

Effect of Ozone, Thermo, and Thermo-oxidative Aging on the Physical Property of Styrene Butadiene Rubber-Organoclay Nanocomposites

Sugata Chakraborty et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2010)

Article Materials Science, Composites

The Effects of Compatibility on the Mechanical Properties and Fatigue Resistance of Butyl/EPDM Rubber Blends

Bagdagul Karaagac et al.

POLYMER COMPOSITES (2010)

Article Polymer Science

Properties and Morphologies of Elastomer Blends Modified with EPDM-g-Poly[2-dimethylamino ethylmethacrylate]

Samir H. Botros et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Review Environmental Sciences

Polymer biodegradation: Mechanisms and estimation techniques

Nathalie Lucas et al.

CHEMOSPHERE (2008)

Article Polymer Science

Cross-linking assessment after accelerated ageing of ethylene propylene diene monomer rubber

N. S. Tomer et al.

POLYMER DEGRADATION AND STABILITY (2007)

Article Polymer Science

Relationship among thermal ageing degradation, dynamic properties, cure systems, and antioxidants in natural rubber vulcanisates

Vorapong Pimolsiriphol et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2007)

Article Polymer Science

Photooxidation of vulcanized EPDM/montmorillonite nanocomposites

Sandrine Morlat-Therias et al.

POLYMER DEGRADATION AND STABILITY (2006)

Article Polymer Science

Kinetics of the effect of ageing on tensile properties of a natural rubber compound

E. F. Ngolemasango et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

Article Materials Science, Multidisciplinary

Synthesis and characteristics of MAH-g-EPDM compatibilized EPDM/NBR rubber blends

S. H. Botros et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2006)

Article Polymer Science

Thermal, ozone and gamma ageing of styrene butadiene rubber and poly(ethylene-co-vinyl acetate) blends

CK Radhakrishnan et al.

POLYMER DEGRADATION AND STABILITY (2006)

Article Polymer Science

Accelerated aging of tires, part III

JM Baldwin et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2005)

Article Materials Science, Multidisciplinary

Compatibility and thermal stability of EPDM-NBR elastomer blends

SH Botros et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2005)

Article Polymer Science

Photooxidation of ethylene-propylene-diene/montmorillonite nanocomposites

S Morlat-Therias et al.

POLYMER DEGRADATION AND STABILITY (2005)

Article Materials Science, Characterization & Testing

Prediction of mechanical properties of polychloroprene during thermo-oxidative aging

T Ha-Anh et al.

POLYMER TESTING (2005)

Review Polymer Science

Heat resistant elastomers

ZH Tao et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2005)

Article Polymer Science

Accelerated aging of tires, Part II

JM Baldwin et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2005)

Article Instruments & Instrumentation

Radiochemical ageing of EPDM elastomers. 3. Mechanism of radiooxidation

A Rivaton et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2005)

Article Polymer Science

Effects of thermal aging on the mechanical properties of natural rubber

JT South et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2003)

Article Materials Science, Multidisciplinary

Thermal, UV- and sunlight ageing of thermoplastic elastomeric natural rubber-polyethylene blends

AK Bhowmick et al.

JOURNAL OF MATERIALS SCIENCE (2002)

Article Polymer Science

New oligomer-bound antioxidants for improved flex crack resistance and ozone resistance

PB Sulekha et al.

POLYMER DEGRADATION AND STABILITY (2002)

Article Thermodynamics

Thermal degradation of natural polymers

MA Villetti et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2002)