Related references
Note: Only part of the references are listed.Fiber bridging mechanism in moisture-induced mode I delamination in carbon/epoxy composites: Finite element analysis and experimental investigation
King Jye Wong et al.
POLYMER COMPOSITES (2023)
Damage evolution and failure mechanism of asymmetric composite laminates under low-velocity impact and compression after impact
Jianchao Zou et al.
THIN-WALLED STRUCTURES (2023)
Numerical investigation on behaviors of composite laminates with initial delamination defects under impact and compression after impact
Xuecheng Han et al.
POLYMER COMPOSITES (2023)
Tension-after-impact analysis and damage mechanism evaluation in laminated composites using AE monitoring
S. Hoseinlaghab et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)
Study on impact resistance and parameter optimization of patch-repaired plain woven composite based on multi-scale analysis
Zhenhui Sun et al.
POLYMER COMPOSITES (2023)
The effect of alternating the sequence of variable-energy repeated impact on the residual strength and damage evolution of composite laminates
Milad Saeedifar et al.
POLYMER COMPOSITES (2023)
Identification of fatigue damage modes for carbon fiber/epoxy composites using acoustic emission monitoring under fully reversed loading
Yi-Er Guo et al.
POLYMER COMPOSITES (2022)
Quasi-static indentation and acoustic emission to analyze failure and damage of bio-composites subjected to low-velocity impact
Mohamed Habibi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)
The effectiveness of patch repairs to restore the impact properties of carbon-fibre reinforced-plastic composites
Z. E. C. Hall et al.
ENGINEERING FRACTURE MECHANICS (2022)
A novel methodology to research the residual compressive mechanical properties of composite stiffened panel after low velocity impact based on quantification damage simulation
Shan Xiao et al.
POLYMER COMPOSITES (2022)
Study of impact damage on composite laminates induced by strip impactor using DIC and infrared thermography
Hongliang Tuo et al.
THIN-WALLED STRUCTURES (2022)
Numerical study on the dynamic progressive failure due to low-velocity repeated impacts in thin CFRP laminated composite plates
M. Rezasefat et al.
THIN-WALLED STRUCTURES (2021)
An evaluation of Cuntze and Puck inter fibre failure criteria in simulation of thin CFRP plates subjected to low velocity impact
M. Rezasefat et al.
COMPOSITE STRUCTURES (2021)
Compressive fatigue behavior of low-velocity impacted thermoplastic composite laminate
Jiwei Chen et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
Numerical comparison between Hashin and Chang-Chang failure criteria in terms of inter-laminar damage behavior of laminated composite
J. R. Shao et al.
MATERIALS RESEARCH EXPRESS (2021)
Differential evolution: A recent review based on state-of-the-art works
Mohamad Faiz Ahmad et al.
Alexandria Engineering Journal (2021)
Bridging the low-velocity impact energy versus impact damage and residual compression strength for composite laminates
Di Zhang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2021)
A study on low-velocity impact performance of notched GFRP composites repaired by different composite patches: Experiment and modeling
Umut Caliskan et al.
POLYMER COMPOSITES (2020)
Damage characterization of laminated composites using acoustic emission: A review
Milad Saeedifar et al.
COMPOSITES PART B-ENGINEERING (2020)
Impact resistance and damage tolerance of fiber reinforced composites
S. Z. H. Shah et al.
COMPOSITE STRUCTURES (2019)
Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels
B. Aryal et al.
COMPOSITE STRUCTURES (2019)
Clustering of interlaminar and intralaminar damages in laminated composites under indentation loading using Acoustic Emission
Milad Saeedifar et al.
COMPOSITES PART B-ENGINEERING (2018)
Barely visible impact damage assessment in laminated composites using acoustic emission
Milad Saeedifar et al.
COMPOSITES PART B-ENGINEERING (2018)
Investigation of interleaf sequence effects on impact delamination of nano-modified woven composite laminates using cohesive zone model
H. Saghafi et al.
COMPOSITE STRUCTURES (2017)
Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 2-Numerical simulation
X. C. Sun et al.
COMPOSITE STRUCTURES (2016)
Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 1-Experiments
E. Abisset et al.
COMPOSITE STRUCTURES (2016)
A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates
A. Wagih et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Modeling of progressive damage for composites under ballistic impact
Aswani Kumar Bandaru et al.
COMPOSITES PART B-ENGINEERING (2016)
Progressive damage simulation of triaxially braided composite using a 3D meso-scale finite element model
Chao Zhang et al.
COMPOSITE STRUCTURES (2015)
Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact
Jikui Zhang et al.
COMPOSITE STRUCTURES (2015)
Delamination prediction in composite laminates under low-velocity impact
Shuchang Long et al.
COMPOSITE STRUCTURES (2015)
The use of quasi-static testing to obtain the low-velocity impact damage resistance of marine GRP laminates
L. S. Sutherland et al.
COMPOSITES PART B-ENGINEERING (2012)
The predictive capability of failure mode concept-based strength conditions for laminates composed of unidirectional laminae under static triaxial stress states
R. Cuntze
JOURNAL OF COMPOSITE MATERIALS (2012)
Material and structural response of polymer-matrix fibre-reinforced composites
S. T. Pinho et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses
R. Gutkin et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)
An experimental and numerical investigation into the damage mechanisms in notched composites
S. R. Hallett et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Continuum Models for the Analysis of Progressive Failure in Composite Laminates
F. P. Van Der Meer et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Punch shear based penetration model of ballistic impact of thick-section composites
B. A. Gama et al.
COMPOSITE STRUCTURES (2008)
Predicting the effect of through-thickness compressive stress on delamination using interface elements
Xiangqlan Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
A continuum damage model for composite laminates:: Part II -: Computational implementation and validation
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
Prediction of size effects in notched laminates using continuum damage mechanics
P. P. Camanho et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Damage propagation in CFRP laminates subjected to low velocity impact and static indentation
Yuichiro Aoki et al.
ADVANCED COMPOSITE MATERIALS (2007)
Progressive damage modeling in fiber-reinforced materials
Ireneusz Lapczyk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Failure criteria for FRP laminates
CG Davila et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Failure analysis of FRP laminates by means of physically based phenomenological models
A Puck et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
A delamination criterions for laminated composites under low-velocity impact
JP Hou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Prediction of impact damage in composite plates
JP Hou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)