☆ 4.7 Article

Experimental study on the combustion properties of four common engineered bamboo and wood composites

POLYMER COMPOSITES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Composites

Bending properties and design strength of reconstituted bamboo at different temperatures

Kunpeng Zhao et al.

Summary: In this study, the bending strength and deformation of reconstituted bamboo beams at different temperatures were measured. The results showed that the bending failure pattern of reconstituted bamboo intensified with increasing temperature, leading to a decrease in ultimate bearing capacity and flexural modulus. The thermal softening effect significantly influenced the plastic behavior of bamboo.

POLYMER COMPOSITES (2023)

Add to Collection

Article Materials Science, Composites

Experimental characterization of creep behavior of laminated bamboo composites based on stepped isothermal method

Yanyan Liu et al.

Summary: In this study, the accelerated test using the stepped isothermal method (SIM) was used to characterize the long-term compressive behavior of laminated bamboo. The selection of the end and beginning segments in the rescaling process for generating a creep master curve using the SIM data was found to affect the determination of virtual time, leading to errors in predicting long-term behavior. It was recommended to use a 40% end segment and a 30% beginning segment to build a more accurate master curve. The generated master curves showed repeatability and matched well with the conventional creep results, indicating that SIM is a reliable tool for accelerated testing of the long-term behavior of laminated bamboo. In addition, isochronous stress-creep strain curves were constructed based on the master curves at different loadings to determine stress levels for structural design.

POLYMER COMPOSITES (2023)

Add to Collection

Article Materials Science, Composites

Anisotropy attenuation of reconstituted bamboo lumber by orthogonal layup process

Zhenyu Qiu et al.

Summary: Current reconstituted bamboo lumber materials have significant anisotropy, with the strength along the fiber direction much stronger than that perpendicular to the fiber. A new cross laminated bamboo (CLB) was designed to reduce the anisotropy of bamboo products, and its four-point bending properties were investigated. The CLB exhibited a reduced ratio of parallel strength to transverse strength in bending, and a laminated composite theory with strain failure criterion accurately predicted its flexural failure. With balanced mechanical properties in all directions, the CLB could be widely applied in building engineering as plated structures.

COMPOSITES COMMUNICATIONS (2023)

Add to Collection

Article Engineering, Civil

Fire resistance evaluation of laminated bamboo lumber column under eccentric compression

Zhaoyan Cui et al.

Summary: This paper evaluates the load-bearing capacity and fire resistance of laminated bamboo lumber (LBL) column under eccentric compression. The study proposes a bilinear relationship between charring depth and exposure time, considering the falling off of the charring layers. The Ultimate State Base Model (USBM) and reduced cross-section method are introduced to calculate the fire resistance of LBL column, which align well with the experimental results.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Materials Science, Composites

Mathematical models for the use, processing, and optimized utilization of natural arc-shaped bamboo laminated lumber

Bin Huang et al.

Summary: This article investigates the thickness and width of natural arc-shaped bamboo laminated lumber and establishes mathematical models to determine the relationships between different parameters, providing guidance for the selection and utilization of bamboo material.

POLYMER COMPOSITES (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Study of Burning Behaviors and Fire Risk of Flame Retardant Plywood by Cone Calorimeter and TG Test

Liping Yu et al.

Summary: The use of a flame retardant containing multiple compounds can significantly improve the fire resistance of plywood, reduce heat release and smoke emissions during combustion, and form a more stable char. The combustion process of treated plywood is slower, reducing the risk of fire incidents.

JOURNAL OF RENEWABLE MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Stress-strain behavior and model of bamboo scrimber under cyclic axial compression

Yang Wei et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Review Construction & Building Technology

Novel engineered wood and bamboo composites for structural applications: State-of-art of manufacturing technology and mechanical performance evaluation

Xiaofeng Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Civil

Experimental study of performance of engineered bamboo beams exposed to three-sided standard fire

Lingzhu Chen et al.

FIRE SAFETY JOURNAL (2019)

Add to Collection

Article Construction & Building Technology

Experimental study on thermal performance of bamboo scrimber at elevated temperatures

Zhaoyan Cui et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Thermal insulation performance of bamboo- and wood-based shear walls in light-frame buildings

J. S. Wang et al.

ENERGY AND BUILDINGS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The charring rate and charring depth of bamboo scrimber exposed to a standard fire

Ming Xu et al.

FIRE AND MATERIALS (2018)

Add to Collection

Review Construction & Building Technology

A critical comparison of green building rating systems

Dat Tien Doan et al.

BUILDING AND ENVIRONMENT (2017)

Add to Collection

Article Construction & Building Technology

A multidimensional model for green building assessment: A case study of a highest-rated project in Chongqing

Yongqiang Li et al.

ENERGY AND BUILDINGS (2016)

Add to Collection

Article Construction & Building Technology

Combustion and charring properties of five common constructional wood species from cone calorimeter tests

Qingfeng Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Chemistry, Analytical

Characterization of the thermal decomposition of two kinds of plywood with a cone calorimeter - FTIR apparatus

Talal Fateh et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)

Add to Collection

Article Construction & Building Technology

Cyclic Performance of Glued Laminated Guadua Bamboo-Sheathed Shear Walls

Sebastian Varela et al.

JOURNAL OF STRUCTURAL ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

Fire simulation test and analysis of laminated bamboo frame building

Yan Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Construction & Building Technology

Assessment of fire reaction and fire resistance of Guadua angustifolia kunth bamboo

Josue Mena et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Construction & Building Technology

A future bamboo-structure residential building prototype in China: Life cycle assessment of energy use and carbon emission

Dongwei Yu et al.

ENERGY AND BUILDINGS (2011)

Add to Collection

Review Environmental Studies

A critical review of building environmental assessment tools

Appu Haapio et al.

ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.