☆ 4.7 Article

Effect of lamination sequence and warhead shape on impact resistance of fiber-metal laminates

POLYMER COMPOSITES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

New insights into the damage assessment and energy dissipation weight mechanisms of ceramic/fiber laminated composites under ballistic impact

Yuanyuan Ma et al.

Summary: Ceramics/composite laminated armor structures have been widely used in bulletproof materials design for their synergistic energy matching. However, limited experimental testing due to heavy workload and high costs poses challenges. In this study, B4C ceramics/ultra-high molecular weight polyethylene (UHMWPE) composite targets were studied using finite element analysis to predict the impact of ceramic splicing size, impact position, and size on anti-elastic performance. The results showed that square splicing and large size ceramics/fiber composites exhibited the best anti-elastic properties when impacted at the center position.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Engineering, Multidisciplinary

Influence of metal/composite interface on the damage behavior and energy absorption mechanisms of FMLs against projectile impact

Sanan H. Khan et al.

Summary: This paper focuses on the interface failure in metal/GFRP laminates under high-velocity impact. Experimental findings are used to establish a finite element model that accurately predicts the damage resistance within the laminates. The results show that while the 8-layer GFRP laminate performs well at lower impact energies, laminates with metal layers provide better damage resistance through delamination, shear failure, and metal plasticity.

DEFENCE TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Role of super-elastic shape memory alloy (SE-SMA) embedment designs on energy absorption in GFRP composites

Vagish D. Mishra et al.

Summary: In this paper, the energy absorption characteristics of a super-elastic shape memory alloy in a flexible glass/epoxy composite were experimentally investigated. The study found that the relatively higher SMA deformation and restricted pull-out had a positive impact on energy absorption.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Evaluation of quasi-static indentation response of superelastic shape memory alloy embedded GFRP laminates using AE monitoring

Luv Verma et al.

Summary: The study found that embedding SE-SMA wires can effectively improve the penetration resistance of laminated glass/epoxy composite materials by enhancing the redistribution of load to resist the indentation load.

POLYMER TESTING (2021)

Add to Collection

Article Engineering, Mechanical

Influence of veil interleave distribution on the delamination resistance of cross-ply CFRP laminates under low velocity impact

Amit Ramji et al.

Summary: Experimental results show that using veil interleaving in CFRP laminates can reduce and shift damage location, impacting stiffness, with differences observed after the Delamination Threshold Load (DTL). This method also achieves a smoothing effect in impact force history and provides important insights into damage characteristics.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

An investigation on the perforation resistance of laminated CFRP beam and square plate

Ke Yuan et al.

Summary: This study examined the mechanical behavior of carbon fiber reinforced plastic (CFRP) materials subjected to local loads through experiments and numerical simulations. The results showed that materials in beam shape exhibited higher perforation resistance and more diverse damage patterns compared to square-shaped specimens. The findings were further validated through numerical simulations considering strain-rate effects.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

Add to Collection

Article Mechanics

Compression after high-velocity impact behavior of pseudo-elastic shape memory alloy embedded glass/epoxy composite laminates

Luv Verma et al.

Summary: The CAI behavior of PE-SMA embedded glass/epoxy composite laminates manufactured via VARI technique was investigated experimentally after high-velocity impact. Results showed that anchored PE-SMA composites had a higher ballistic limit compared to homogeneous glass/epoxy composites, and the damage tolerance of PE-SMA based composites was better at 70 m/s but lower at higher velocities compared to homogeneous ones.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Critical bending load of CFRP panel with shallow surface scratch determined by a tensile strength model

Bingyan Yuan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Manufacturing

Strength and failure modes of surface treated CFRP secondary bonded single-lap joints in static and fatigue tensile loading regimes

Seong-Min Park et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Engineering, Mechanical

Crushing behaviors of unidirectional carbon fiber reinforced plastic composites under dynamic bending and axial crushing loading

Guowei Zhou et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

Add to Collection

Article Materials Science, Composites

Compression after ballistic impact response of pseudoelastic shape memory alloy embedded hybrid unsymmetrical patch repaired glass-fiber reinforced polymer composites

Luv Verma et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Materials Science, Composites

Intra-laminar toughening mechanisms to enhance impact damage tolerance of 2D woven composite laminates via yarn-level fiber hybridization and fiber architecture

Hussein Dalfi et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Engineering, Mechanical

Impact on carbon fiber composite: Ballistic tests, material tests, and computer simulations

Sidney Chocron et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Experimental investigation on the ballistic resistance of polymer-aluminum laminated plates

Xianglin Huang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

Add to Collection

Article Engineering, Mechanical

Influence of fiber type on the impact response of titanium-based fiber-metal laminates

Xin Li et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

Add to Collection

Article Engineering, Mechanical

Perforation of aluminium alloy-CFRP bilayer plates under quasi-static and impact loading

B. Yu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

Add to Collection

Article Engineering, Mechanical

Perforation resistance of CFRP beams to quasi-static and ballistic loading: The role of matrix strength

B. Yu et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

Add to Collection

Review Engineering, Manufacturing

Carbon fiber reinforced metal matrix composites: Fabrication processes and properties

Kamyar Shirvanimoghaddam et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection

Article Mechanics

Ballistic analysis of fiber metal laminates impacted by flat and conical impactors

Hamed Zarei et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Mechanical

The ballistic resistance of thin aluminium plates with varying degrees of fixity along the circumference

G. Tiwari et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

Add to Collection

Article Engineering, Mechanical

Effect of lay-up orientation on ballistic impact behaviors of GLARE 5 FML beams

A. Seyed Yaghoubi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)

Add to Collection

Review Engineering, Mechanical

Impact resistance of fiber-metal laminates: A review

M. Sadighi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

Add to Collection

Article Mechanics

On the ballistic resistance of double-layered steel plates: An experimental and numerical investigation

S. Dey et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Materials Science, Composites

An historic overview of the development of fibre metal laminates

CAJR Vermeeren

APPLIED COMPOSITE MATERIALS (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Impact perforation resistance and fracture mechanisms of a thermoplastic based fiber-metal laminate

P Compston et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.