☆ 4.5 Article

Development of chondroitin sulfate-based mucoadhesive interpenetrating polymeric hydrogels of captopril with adjustable properties as gastro-retentive sustained drug release carriers

POLYMER BULLETIN (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Formulation and evaluation of polyethylene glycol/Xanthan gum-co-poly (Acrylic acid) interpenetrating network for controlled release of venlafaxine

Fahad Pervaiz et al.

Summary: The present study developed a polyethylene glycol and xanthan-gum based interpenetrating network for controlled drug release. The network, synthesized via copolymerization of natural and synthetic polymers, showed potential for drug release control according to various characterization and analysis techniques.

POLYMER BULLETIN (2023)

Add to Collection

Article Materials Science, Paper & Wood

Carboxymethyl cellulose/polyamidoamine hydrogel loaded with nano-Ag particles as recoverable efficient catalyst for reduction of 4-nitrophenol in water

Cuizhi Zhang et al.

Summary: This study investigated a CMC/PAMAM hydrogel loaded with nano-Ag catalyst prepared through the Schiff base reaction between CMC-CHO and G4.0-PAMAM-Ag. It was found that the hydrogel could reduce 4-NP to 4-AP in water in only 9 minutes, similar to free G4.0-PAMAM-Ag. The turnover frequency of the hydrogel catalyst was as high as 169 h(-1), much higher than cellulose/PAMAM composite supported nano-Ag and dextrann/PAMAM hydrogel supported nano-Ag.

CELLULOSE (2023)

Add to Collection

Article Pharmacology & Pharmacy

Mucoadhesive chitosan/polyvinylpyrrolidone-co-poly (2-acrylamide-2-methylpropane sulphonic acid) based hydrogels of captopril with adjustable properties as sustained release carrier: Formulation design and toxicological evaluation

Rubina Qaiser et al.

Summary: By utilizing chitosan as a mucoadhesive and pH-sensitive polymer, a novel CS/PVP-co-poly (AMPS) network-based hydrogel was fabricated. Captopril was successfully loaded into the hydrogel network using a diffusion-aided-swelling technique. The physicochemical properties and morphology of the hydrogel were characterized, showing the entrapment of captopril at a molecular level and the dissolution profile of the hydrogel system. The developed hydrogel system demonstrated mucoadhesive properties and biocompatibility, making it suitable for sustained release of captopril and improved drug absorption in the stomach.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Unreported resistance in charge transport limits the photoconversion efficiency of aqueous dye-sensitised solar cells: an electrochemical impedance spectroscopy study

M. Bonomo et al.

Summary: In this study, electrochemical impedance spectroscopy is used to compare liquid and polymeric aqueous dye-sensitized solar cells (a-DSSCs) with conventional organic solvent-based devices. The results reveal two unique features in the electrochemical impedance spectroscopy spectra of a-DSSCs that are not observed in organic-based DSSCs. These features are related to the diffusion kinetics of the redox mediator and the breakdown at the semiconductor/FTO interface, which affect the efficiency of the water-based photovoltaics. The findings suggest that tailored equivalent circuits incorporating these features are currently under investigation.

MATERIALS TODAY SUSTAINABILITY (2023)

Add to Collection

Article Materials Science, Biomaterials

Formulation and optimization of captopril-loaded microspheres based compressed tablets:in vitroevaluation

Azeema Tayyab et al.

Summary: The objective of this study was to develop compressed tablets containing captopril-loaded microspheres for controlled release. The microspheres, produced using a double emulsification technique, exhibited a spherical geometry and high encapsulation efficiency. The optimized formulation achieved zero-order drug release.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Pluronic F127-co-poly (2 acrylamido-2-methylpropane sulphonic acid) crosslinked matrices as potential controlled release carrier for an anti-depressant drug: in vitro and in vivo attributes

Hina Shoukat et al.

Summary: The study developed crosslinked hydrogels for the controlled delivery of Venlafaxine HCl, demonstrating high drug entrapment efficiency and pH-responsive properties. The gel was found to be non-toxic to biological systems based on toxicity study.

CHEMICAL PAPERS (2022)

Add to Collection

Article Polymer Science

Fabrication and evaluation of pH sensitive chemically cross-linked interpenetrating network [Gelatin/Polyvinylpyrrolidone-co-poly(acrylic acid)] for targeted release of 5-fluorouracil

Asma Majeed et al.

Summary: The prime objective of this study was to fabricate a novel pH-sensitive chemically cross-linked interpenetrating network (IPN) of gelatin/polyvinylpyrrolidone-co-poly (acrylic acid) for controlled delivery of 5-fluorouracil at colon-specific site. The IPN was prepared through free radical polymerization method and exhibited pH-sensitive behavior and biocompatibility. The fabricated hydrogels could be a potential controlled drug delivery system for 5-Fluorouracil.

POLYMER BULLETIN (2022)

Add to Collection

Article Multidisciplinary Sciences

Development of β-cyclodextrin/polyvinypyrrolidone-co-poly (2-acrylamide-2-methylpropane sulphonic acid) hybrid nanogels as nano-drug delivery carriers to enhance the solubility of Rosuvastatin: An in vitro and in vivo evaluation

Hina Shoukat et al.

Summary: This study aimed to improve the solubility of rosuvastatin (RST) by designing betacyclodextrin/polyvinypyrrolidone-co-poly (2-acrylamide-2-methylpropane sulphonic acid) crosslinked hydrophilic nanogels using the free-radical polymerization method. The developed nanogels showed excellent physicochemical properties, improved dissolution, high solubilization, and non-toxicity, making them a promising approach for the oral administration of poorly water-soluble drugs.

PLOS ONE (2022)

Add to Collection

Article Polymer Science

Synthesis of chitosan-g-itaconic acid hydrogel as an antibacterial drug carrier: optimization through RSM-CCD

Sasan Dan et al.

Summary: In this research, chitosan-itaconic acid graft copolymer hydrogel was successfully synthesized with optimized reaction conditions. The structure, morphology, thermal stability, swelling behavior, antibacterial properties, and drug-loading capabilities of the hydrogel were studied and characterized, with successful loading of ciprofloxacin as a model drug.

POLYMER BULLETIN (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication and evaluation of gelatin-PVA-co-poly(2-acrylamido-2-methylpropane sulfonic acid)-based hydrogels for extended-release of sitagliptin and metformin by employing response surface methodology

Maria Tabassum et al.

Summary: This study aimed to fabricate Gelatin-PVA-co-poly(2-acrylamido-2-methylpropane sulfonic acid)-based hydrogels for extended-release of sitagliptin and metformin. The hydrogels were successfully prepared through a free-radical polymerization process and characterized by various techniques. The fabricated hydrogel showed pH-independent swelling and controlled drug release. It could potentially serve as a carrier for the prolonged treatment of sitagliptin and metformin, enhancing patient compliance.

CHEMICAL PAPERS (2022)

Add to Collection

Article Endocrinology & Metabolism

Captopril exhibits protective effects through anti-inflammatory and anti-apoptotic pathways against hydrogen peroxide-induced oxidative stress in C6 glioma cells

Bilal Sahin et al.

Summary: Captopril has a protective effect on glial cell damage after H2O2-induced oxidative stress by inhibiting oxidative stress, reducing inflammation, and suppressing apoptosis.

METABOLIC BRAIN DISEASE (2022)

Add to Collection

Article Polymer Science

Preparation and characterization of methylene bisacrylamide crosslinked pectin/acrylamide hydrogels

Ayesha Siddiqua et al.

Summary: By manufacturing a pH-sensitive and biocompatible interpenetrating polymer network device, the targeting and absorption enhancement of BCS III drugs in the colon can be achieved. The porosity and gel fraction of the hydrogel were related to the content of pectin and acrylamide, and the drug release mechanism was mainly Fickian diffusion.

POLYMER BULLETIN (2022)

Add to Collection

Article Polymer Science

Formulation of captopril-loaded hydrogel by microwave-assisted free radical polymerization and its evaluation

Furqan Muhammad Iqbal et al.

Summary: Microwave-assisted crosslinking of PVA and AMPS was used to prepare hydrogels, which showed significant swelling and drug release capacity under appropriate conditions, as evidenced by in vitro and in vivo evaluations, suggesting their potential for sustained drug delivery.

POLYMER BULLETIN (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Cardanol-Derived Epoxy Resins as Biobased Gel Polymer Electrolytes for Potassium-Ion Conduction

Eleonora Manarin et al.

Summary: This study developed biobased gel polymer electrolyte (GPE) membranes through esterification reaction, showing excellent electrochemical stability and suitable ionic conductivity for potassium-ion battery fabrication.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Temperature- and pH-Responsive Hydrogel Nanoparticles with Embedded Au Nanoparticles as Catalysts for the Reduction of Dyes

Priyanshi Agnihotri et al.

Summary: In this study, a facile approach was reported to synthesize Au nanoparticle (Au NP)-immobilized hydrogel nanoparticles with excellent catalytic activity. The catalytic performance of the hybrid microgels could be tuned by adjusting experimental conditions, and the catalyst showed good reusability. This research has important implications for the sustainable development of materials in wastewater treatment.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Review Biotechnology & Applied Microbiology

Biopolymers and their derivatives: Key components of advanced biomedical technologies

Ioana A. Duceac et al.

Summary: This article discusses the importance of finding novel materials in the biomedical field, focusing on the advantages of polysaccharides produced from natural resources. It also examines the chemical and biological characteristics of several primary polysaccharides and their derivatives.

BIOTECHNOLOGY ADVANCES (2022)

Add to Collection

Article Electrochemistry

UV-cured self-healing gel polymer electrolyte toward safer room temperature lithium metal batteries

Simone Siccardi et al.

Summary: This work proposes a UV-induced, solvent-free radical copolymerization method for improving the performance of solid polymer electrolytes. The resulting polymers demonstrate high thermal stability, good lithium-ion conductivity, wide electrochemical window, and self-healing properties. Additionally, the polymers exhibit excellent stability for lithium plating and stripping.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Review Peripheral Vascular Disease

Angiotensinogen Suppression: A New Tool to Treat Cardiovascular and Renal Disease

Edwyn O. Cruz-Lopez et al.

Summary: Multiple types of RAS blockers exist to treat hypertension, but patient noncompliance and RAS escape remain challenges. New approaches using antisense oligonucleotides and siRNA to target angiotensinogen show promise in circumventing RAS escape. However, limited clinical data is available to support these methods.

HYPERTENSION (2022)

Add to Collection

Article Pharmacology & Pharmacy

Preparation of pH-Responsive Hydrogels Based on Chondroitin Sulfate/Alginate for Oral Drug Delivery

Muhammad Suhail et al.

Summary: This study investigates pH-sensitive hydrogels based on biocompatible, biodegradable polysaccharides and natural polymers combined with synthetic monomers as controlled drug carriers. The hydrogel was characterized for its physical and chemical properties, surface morphology, crystallinity, swelling behavior, and drug release. The results showed that the hydrogel exhibited high crosslinking, drug loading capacity, and swelling behavior, making it suitable for controlled delivery of ketorolac tromethamine.

PHARMACEUTICS (2022)

Add to Collection

Article Chemistry, Physical

Self-healable dynamic poly(urea-urethane) gel electrolyte for lithium batteries

Fermin Elizalde et al.

Summary: A membrane containing dynamic hindered urea crosslinking points with self-healable properties and higher ionic conductivity has been synthesized. It exhibits great recovery of electrochemical properties after severe mechanical damage, making it a promising material for batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Polymer Science

Synthesis of pH-Sensitive Cross-Linked Basil Seed Gum/Acrylic Acid Hydrogels by Free Radical Copolymerization Technique for Sustained Delivery of Captopril

Shazia Akram Ghumman et al.

Summary: In this study, a pH-sensitive basil seed gum hydrogel was prepared using two different monomers and characterized using various techniques. The results showed that the swelling properties and drug release pattern of the hydrogel were influenced by the polymer, monomer, and initiator used. The study also found that the hydrogel exhibited different properties under acidic and basic pH conditions.

GELS (2022)

Add to Collection

Article Polymer Science

Formulation and evaluation of interpenetrating network of xanthan gum and polyvinylpyrrolidone as a hydrophilic matrix for controlled drug delivery system

Maryam Anwar et al.

Summary: The study focused on developing novel colon-targeting hydrogels for controlled delivery of 5-fluorouracil. Through various analyses and experiments, it was found that the hydrogels exhibited pH-sensitive behavior, good swelling and drug release properties, low toxicity, and excellent stability.

POLYMER BULLETIN (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation and optimization of novel graphene oxide and adsorption isotherm study of methylene blue

Aida Arabpour et al.

Summary: In this study, graphene oxide (GO) with high oxidation degree and high adsorption capacity was successfully synthesized using a modified method. The optimal conditions for maximizing the oxidation degree were determined as ultrasonic temperature of 30.8 degrees Celsius, ultrasonic time of 47.5 minutes, and the time of adding oxidizing agent of 3 hours. The synthesized GO exhibited a high adsorption capacity for methylene blue (MB).

ARABIAN JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Development and characterization of pH-sensitive chondroitin sulfate-co-poly(acrylic acid) hydrogels for controlled release of diclofenac sodium

Muhammad Suhail et al.

Summary: The study successfully prepared pH-sensitive chondroitin sulfate-co-poly (acrylic acid) hydrogels for controlled release of diclofenac sodium. The hydrogels showed high stability and controlled release effect, with high swelling and drug release rate at pH 7.4.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2021)

Add to Collection

Article Polymer Science

Nanosponge-Based Composite Gel Polymer Electrolyte for Safer Li-O2 Batteries

Julia Amici et al.

Summary: Li-O-2 batteries have high theoretical energy density but are limited by poor cycling stability and safety issues. Researchers have developed a composite gel polymer electrolyte to address these challenges, with a cross-linked structure and nanosponge to improve ionic conductivity.

POLYMERS (2021)

Add to Collection

Article Polymer Science

Chitosan as a paradigm for biopolymer electrolytes in solid-state dye-sensitised solar cells

Noriah Abdul Rahman et al.

Summary: Biopolymers, specifically chitosan, loaded with NaI salt are explored as a solid polymer electrolyte for dye sensitised solar cells. The chitosan-NaI electrolyte shows promising interactions, weakening chitosan's semi-crystalline domains and enhancing the conduction of redox shuttle ions. The solid-state electrolyte exhibits high ionic conductivity and stable power conversion efficiency for photovoltaic devices.

POLYMER (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of modified chitosan TiO2 and SiO2 hydrogel nanocomposites for cadmium removal

Soudeh Banivaheb et al.

Summary: In this study, nanocomposites based on chitosan and titanium dioxide/silicon dioxide nanoparticles were synthesized for the removal of Cd2+ from water with good antibacterial properties. The nanocomposites exhibited porous structures and water absorption capacities, with high cadmium adsorption capacities.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2021)

Add to Collection

Article Medicine, General & Internal

Comparing Effectiveness of Combination of Collagen Peptide Type-1, Low Molecular Weight Chondroitin Sulphate, Sodium Hyaluronate, and Vitamin-C Versus Oral Diclofenac Sodium in Achilles Tendinopathy: A Prospective Randomized Control Trial

Arun Choudhary et al.

Summary: The study found that the nutraceutical combination of collagen peptide type-1, chondroitin sulphate, sodium hyaluronate, and vitamin C was more effective in controlling pain in Achilles tendinopathy compared to oral diclofenac sodium.

CUREUS JOURNAL OF MEDICAL SCIENCE (2021)

Add to Collection

Review Pharmacology & Pharmacy

Recent developments in pharmaceutical salts: FDA approvals from 2015 to 2019

Sonali S. Bharate

Summary: Drugs with poor aqueous solubility can have low and unpredictable oral bioavailability, so it is important to find strategies to enhance solubility. Around half of the new molecular entities approved by the US FDA are pharmaceutical salts, which have been steadily growing since 1939. This review provides updates on 61 pharmaceutical salts approved by the FDA between 2015 and 2019, detailing their chemical structures and therapeutic indications.

DRUG DISCOVERY TODAY (2021)

Add to Collection

Article Polymer Science

Fabrication and evaluation studies of novel polyvinylpyrrolidone and 2-acrylamido-2-methylpropane sulphonic acid-based crosslinked matrices for controlled release of acyclovir

Hina Shoukat et al.

POLYMER BULLETIN (2020)

Add to Collection

Article Polymer Science

Chondroitin sulfate-based smart hydrogels for targeted delivery of oxaliplatin in colorectal cancer: preparation, characterization and toxicity evaluation

Kashif Barkat et al.

POLYMER BULLETIN (2020)

Add to Collection

Article Pharmacology & Pharmacy

Poloxamer-407-Co-Poly (2-Acrylamido-2-Methylpropane Sulfonic Acid) Cross-linked Nanogels for Solubility Enhancement of Olanzapine: Synthesis, Characterization, and Toxicity Evaluation

Kifayat Ullah Khan et al.

AAPS PHARMSCITECH (2020)

Add to Collection

Article Engineering, Environmental

Amine functionalized egg albumin hydrogel with enhanced adsorption potential for diclofenac sodium in water

Chirag B. Godiya et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Gelatin-based hydrogels as potential biomaterials for colonic delivery of oxaliplatin

Kaleem Ullah et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Article Polymer Science

Preparation and in vitro evaluation of Chondroitin sulfate and carbopol based mucoadhesive controlled release polymeric composites of Loxoprofen using factorial design

Akhtar Ali et al.

EUROPEAN POLYMER JOURNAL (2019)

Add to Collection

Article Chemistry, Applied

Chitosan/pvp-based mucoadhesive membranes as a promising delivery system of betamethasone-17-valerate for aphthous stomatitis

R. H. Sizilio et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Chemistry, Applied

Synthesis and evaluation of chondroitin sulfate based hydrogels of loxoprofen with adjustable properties as controlled release carriers

Ikrima Khalid et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Fabrication and in vitro characterization of HPMC-g-poly(AMPS) hydrogels loaded with loxoprofen sodium

Hira Khanum et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Synthesis and characterization of chitosan-PVP-nanocellulose composites for in-vitro wound dressing application

R. Poonguzhali et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Review Clinical Neurology

Early experience with compassionate use of 2 hydroxypropyl-beta-cyclodextrin for Niemann-Pick type C disease: review of initial published cases

Juan Eduardo Megias-Vericat et al.

NEUROLOGICAL SCIENCES (2017)

Add to Collection

Article Pharmacology & Pharmacy

Controlled delivery of valsartan by cross-linked polymeric matrices: Synthesis, in vitro and in vivo evaluation

Muhammad Sohail et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)

Add to Collection

Article Chemistry, Applied

Synthesis and characterization of a novel semi-IPN hydrogel based on Salecan and poly(N,N-dimethylacrylamide-co-2-hydroxyethyl methacrylate)

Xinyu Hu et al.

CARBOHYDRATE POLYMERS (2014)

Add to Collection

Article Polymer Science

Controlled release of highly water-soluble antidepressant from hybrid copolymer poly vinyl alcohol hydrogels

Liaqat Ali et al.

POLYMER BULLETIN (2014)

Add to Collection

Article Polymer Science

A novel route to prepare highly surface active nanogel particles based on nonaqueous emulsion polymerization

Ayman M. Atta et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2013)

Add to Collection

Review Chemistry, Analytical

Physical stability of pharmaceutical formulations: solid-state characterization of amorphous dispersions

Yushen Guo et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2013)

Add to Collection

Article Polymer Science

Synthesis, Characterization, and Ion Exchange Voltammetry Study on 2-Acrylamido-2-methylpropane Sulphonic Acid and N-(hydroxymethyl) Acrylamide-Based Copolymer

Pankaj Kumar Rastogi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection

Article Pharmacology & Pharmacy

Effect of crosslinker concentration on characteristics of superporous hydrogel

H. V. Chavda et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICAL INVESTIGATION (2011)

Add to Collection

Article Polymer Science

Swelling and Controlled Release of Tramadol Hydrochloride from a pH-Sensitive Hydrogel

Talib Hussain et al.

DESIGNED MONOMERS AND POLYMERS (2011)

Add to Collection

Article Pharmacology & Pharmacy

Cyclodextrin-based nanosponges encapsulating camptothecin: Physicochemical characterization, stability and cytotoxicity

Shankar Swaminathan et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2010)

Add to Collection

Article Engineering, Biomedical

Preparation and characterization of hybrid pH-sensitive hydrogels of chitosan-co-acrylic acid for controlled release of verapamil

Nazar M. Ranjha et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)

Add to Collection

Article Physics, Condensed Matter

Chitosan filler effects on the experimental characterization, spectroscopic investigation and thermal studies of PVA/PVP blend films

E. M. Abdelrazek et al.

PHYSICA B-CONDENSED MATTER (2010)

Add to Collection

Article Polymer Science

Synthesis of Ethylene Glycol Dimethacrylate-Methyl Methacrylate Copolymers, Determination of their Reactivity Ratios, and a Study of Dopant and Temperature Effects on their Conductivities

Ulku S. Ramelow et al.

POLYMERS (2010)

Add to Collection

Article Polymer Science

Development and Characterization of Chitosan-Based Polymeric Hydrogel Membranes

M. Ray et al.

DESIGNED MONOMERS AND POLYMERS (2010)

Add to Collection

Article Pharmacology & Pharmacy

Chitosan-Chondroitin Sulfate Based Matrix Tablets for Colon Specific Delivery of Indomethacin

Jitendra R. Amrutkar et al.

AAPS PHARMSCITECH (2009)

Add to Collection

Article Chemistry, Applied

Characterization and in vitro evaluation of starch based hydrogels as carriers for colon specific drug delivery systems

A. El-Hag Ali et al.

CARBOHYDRATE POLYMERS (2009)

Add to Collection

Article Thermodynamics

Compatibility studies between captopril and pharmaceutical excipients used in tablets formulations

H. K. Stulzer et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2008)

Add to Collection

Article Chemistry, Applied

Synthesis and properties of biodegradable hydrogels of κ-carrageenan grafted acrylic acid-co-2-acrylamido-2-methylpropanesulfonic acid as candidates for drug delivery systems

A. Pourjavadi et al.

REACTIVE & FUNCTIONAL POLYMERS (2007)

Add to Collection

Article Engineering, Biomedical

Superporous hydrogels containing poly(acrylic acid-co-acrylamide)/O-carboxymethyl chitosan interpenetrating polymer networks

Lichen Yin et al.

BIOMATERIALS (2007)

Add to Collection

Article Pharmacology & Pharmacy

Design and evaluation of matrix-based controlled release tablets of diclofenac sodium and chondroitin sulphate

Amelia Avachat et al.

AAPS PHARMSCITECH (2007)

Add to Collection

Article Chemistry, Applied

Semi-IPNs of starch and poly(acrylamide-co-sodium methacrylate): Preparation, swelling and diffusion characteristics evaluation

P. S. Keshava Murthy et al.

REACTIVE & FUNCTIONAL POLYMERS (2006)

Add to Collection

Article Chemistry, Applied

Preparation of poly(vinyl alcohol)-chondroitin sulfate hydrogel as matrices in tissue engineering

CT Lee et al.

CARBOHYDRATE POLYMERS (2005)

Add to Collection

Article Polymer Science

Reactive extrusion of starch-polyacrylamide graft copolymers: Effects of monomer/starch ratio and moisture content

VL Finkenstadt et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2005)

Add to Collection

Article Chemistry, Applied

Synthesis and characterization of chondroitin sulfate-methacrylate hydrogels

LF Wang et al.

CARBOHYDRATE POLYMERS (2003)

Add to Collection

Article Polymer Science

Swelling behaviors of polyelectrolyte hydrogels containing sulfonate groups

AM Atta

POLYMERS FOR ADVANCED TECHNOLOGIES (2002)

Add to Collection

Article Polymer Science

Acrylamide/2-acrylamido-2-methylpropane sulfonic acid sodium salt-based hydrogels: synthesis and characterization

S Durmaz et al.

POLYMER (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.