☆ 4.7 Article

Numerical simulation of boiling behavior in vertical microchannels

PHYSICS OF FLUIDS (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Assessment of computational method for highly subcooled flow boiling in a horizontal channel with one-sided heating and improvement of bubble dispersion

Jeongmin Lee et al.

Summary: This study investigates the local hydrodynamic and heat transfer characteristics of subcooled horizontal flow boiling. The study shows that body force significantly affects the predicted results, leading to asymmetric distribution of fluid velocity and temperature along the channel. The shear-lift force has a greater impact on the dynamic behavior of small bubbles and heat transfer. Including the bubble collision dispersion force improves the agreement between simulation and experimental results.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Add to Collection

Article Mechanics

The bubble breakup process and behavior in T-type microchannels

Zheng Zhang et al.

Summary: The bubble breakup process in a double T-type microchannel was simulated using a volume of fluid model via numerical simulation. The simulation results show five different breakup regimes, including non-breakup, tunnel breakup, obstructed breakup, merging symmetric breakup, and merging non-breakup. The study reveals that at high gas velocity and small bubble size, the bubble does not break up, while symmetric breakup regimes can be divided into tunnel breakup and obstructed breakup. The merging symmetrical breakup regime involves both tunnel breakup and obstructed breakup processes.

PHYSICS OF FLUIDS (2023)

Add to Collection

Review Green & Sustainable Science & Technology

Hybridizing solid oxide fuel cells with internal combustion engines for power and propulsion systems: A review

Hamed Chehrmonavari et al.

Summary: There is a growing demand for new energy conversion devices with high efficiency and low emissions. Solid oxide fuel cells (SOFCs) have received attention due to their advantages in efficiency, fuel flexibility, low emissions, and waste heat utilization. The integration of SOFCs with internal combustion engines (ICEs) can further increase overall system efficiency and has potential applications in stationary power generation and heavy-duty systems.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2023)

Add to Collection

Article Thermodynamics

Theoretical and experimental research on flow boiling heat transfer in microchannels for IGBT modules

X.L. Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Add to Collection

Article Mechanics

Bubble growth and departure behavior in subcooled flow boiling regime

Nikhil Chitnavis et al.

Summary: The study investigates the bubble growth rate and departure mechanism in subcooled flow boiling conditions. An energy balance model is used to estimate the bubble growth rate, taking into account components such as microlayer evaporation, conduction, and condensation heat transfer. A force balance model predicts the bubble departure diameter and type. The models are validated against experimental data and a flow regime map is developed to identify bubble departure characteristics.

PHYSICS OF FLUIDS (2023)

Add to Collection

Article Mechanics

Experiments to understand microlayer and dry patch dynamics under subcooled nucleate flow boiling in a vertically oriented rectangular channel

Mohd Moiz et al.

Summary: Nucleate flow boiling is an effective heat transfer mode with high heat transfer rates. This study focuses on the influence of subcooling on the dynamics of dry patches and microlayers during nucleate flow boiling. Flow boiling experiments were conducted on a hydrophilic surface with water as the working fluid. The experiments revealed that increasing subcooling level leads to a decrease in the size of dry patches and the radial spread of microlayers.

PHYSICS OF FLUIDS (2023)

Add to Collection

Article Thermodynamics

Numerical investigation of critical heat flux during subcooled flow boiling in a vertical rectangular Mini-channel

Yu-Jie Chen et al.

Summary: In this study, the VOSET method is used to investigate the critical heat flux (CHF) of subcooled flow boiling in a vertical rectangular mini-channel. The relationship between boiling crisis and dry patch is demonstrated, and a new triggering mechanism is proposed. The results show that the appearance of an almost permanent dry patch with high local wall superheating is caused by the continuous coalescence of elongated bubbles midstream and downstream.

APPLIED THERMAL ENGINEERING (2023)

Add to Collection

Article Thermodynamics

3-D numerical study of subcooled flow boiling in a horizontal rectangular mini-channel by VOSET

Yu-Jie Chen et al.

Summary: A three-dimensional conjugated numerical simulation is conducted using the interface capturing method to investigate subcooled flow boiling in a horizontal rectangular mini-channel. The simulation successfully captures hundreds of bubbles with different sizes and reproduces the typical processes and flow boiling patterns. The effects of heat flux and vapor fraction on heat transfer coefficient are discussed, and the heat transfer mechanisms of subcooled flow boiling at different heat flux in the present mini-channel are explored.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Effect of bubble coalescence on two-phase flow boiling heat transfer in raccoon microchannel - A numerical study

Vatsal Jayantilal Bhuva et al.

Summary: A numerical study on two-phase flow boiling in raccoon and straight microchannels is conducted, showing the presence of flow boiling instability and the impact of bubble dynamics on the process. Analysis of Eotvos and Weber numbers is used to study bubble behavior and shape, and the influence of different parameters such as waviness and mass flux on bubble flow patterns is investigated. The study also observes the effect of forces on bubble coalescence under varying waviness and mass flux conditions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Two-phase heat transfer correlations in three-dimensional hierarchical tube

Wei Li

Summary: Developing novel enhanced surface tubes is an important approach to improve two-phase flow heat transfer. However, accurately predicting the heat transfer correlations in enhanced tubes has been a challenging task. This paper presents a method to directly develop two-phase heat transfer correlations in enhanced tubes based on existing smooth tube models, by introducing modifying factors and dimensionless numbers. The method is supported by theoretical analysis and experimental studies, and new correlations are successfully developed in an enhanced heat transfer tube as an example.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Review Thermodynamics

Dynamic instabilities of flow boiling in micro-channels: A review

Biao Wang et al.

Summary: This review investigates the dynamic instabilities of gas-liquid two-phase flow boiling in micro-channels from both theoretical and experimental perspectives. Various methods to suppress instabilities are summarized, and further research directions are proposed. Experimental evidence is provided for three primary dynamic instabilities in micro-channels, and the effects of instabilities on flow pattern and heat transfer coefficient are discussed.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Mechanics

Numerical investigation of subcooled flow boiling in an inclined rectangular mini-channel at a low flow rate

Yu-Jie Chen et al.

Summary: This paper investigates subcooled flow boiling in an inclined mini-channel using numerical methods, and finds that the inclination angle has a slight effect on the boiling behavior and heat transfer.

PHYSICS OF FLUIDS (2022)

Add to Collection

Article Thermodynamics

Numerical study of flow reversal during bubble growth and confinement of flow boiling in microchannels

Yuhao Lin et al.

Summary: Flow boiling instability caused by confined bubbles in microchannels leads to flow reversal and earlier critical heat flux. Increasing mass flux can suppress flow reversal but minimizes heat transfer enhancement. Finned microchannel heat sinks prevent flow reversal and improve heat transfer performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Conjugate heat transfer analysis of bubble growth during flow boiling in a rectangular microchannel

Yuhao Lin et al.

Summary: This study investigates the conjugate heat transfer of bubble growth during flow boiling in microchannels, revealing its significant impact on heat transfer performance. Conjugate heat transfer is crucial in simulating phase-change phenomena.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Mechanics

Flow boiling in geometrically modified microchannels

Justin Broughton et al.

Summary: Microchannels are a potential solution for high-heat-flux thermal management, with methods like constricted inlet, expanding, and auxiliary jetting microchannels examined to mitigate thermohydraulic instabilities. Computational fluid dynamics and heat transfer analyses show improvements in thermal and pressure performance, consistent with experimental results. Bubble dynamics and visualization provide insights into underlying physics, with performance differences investigated and compared with existing literature.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Thermodynamics

Assessing advantages and disadvantages of macro- and micro-channel flow boiling for high-heat-flux thermal management using computational and theoretical/empirical methods

V.S. Devahdhanush et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental investigation and analysis of parametric trends of instability in two-phase micro-channel heat sinks

Jeongmin Lee et al.

Summary: This study investigates Density Wave Oscillation (DWO) and Parallel Channel Instability (PCI) in a microchannel heat sink, showing significant variations in bubble growth and flow patterns among channels under different mass velocities and heat fluxes. The effects of instabilities in the heat sink are also found to impact other components of the flow loop. The parametric trends for PCI are explored using three different types of stability maps, which demonstrate varying abilities in distinguishing stable and unstable operations.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Numerical Investigation on Bubble Growth and Merger in Microchannel Flow Boiling With Self-Rewetting Fluid

Wei Li et al.

Summary: This study investigates the heat transfer performance of self-rewetting fluid in microchannel flow boiling through numerical simulations. It is found that self-rewetting fluid can reduce the dryout area, increase the thin liquid film area, and enhance heat transfer efficiency in microchannels.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Review Optics

Recent research and development status of laser cladding: A review

Lida Zhu et al.

Summary: This paper provides a detailed introduction to the application of Laser Cladding (LC) in machine parts repairing and functional coating, as well as comprehensive reviews on High Entropy Alloys (HEAs), amorphous alloys, and single crystal alloys in LC. The existing problems and development trends of LC are also discussed in the paper.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Mechanics

Bubble dynamics and dry spot formation during boiling on a hierarchical structured surface: A lattice Boltzmann study

Y. Yu et al.

Summary: The boiling heat transfer on the hierarchical structured surface is significantly influenced by the structural parameters of secondary pillars. Increasing the height or width of the secondary pillars can enhance the bubble departure frequency, but may also enlarge the dry spot area.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Thermodynamics

3-D computational investigation and experimental validation of effect of shear-lift on two-phase flow and heat transfer characteristics of highly subcooled flow boiling in vertical upflow

Jeongmin Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Comparative Study of the Flow Boiling Performance of the Hybrid Microchannel-Microgap Heat Sink with Conventional Straight Microchannel and Microgap Heat Sinks

John Mathew et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

3D Transient heat transfer analysis and flow visualization study in diverging microchannel for instability mitigated two-phase flow: A numerical study

Uday Kumar Alugoju et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Experimental and numerical investigation of the effect of number of parallel microchannels on flow boiling heat transfer

Gaurav Hedau et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Mechanics

Two-phase flow boiling in a microfluidic channel at high mass flux

Chanyoot Keepaiboon et al.

PHYSICS OF FLUIDS (2020)

Add to Collection

Article Thermodynamics

Computational prediction of key heat transfer mechanisms and hydrodynamic characteristics of critical heat flux (CHF) in subcooled vertical upflow boiling

Jeongmin Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Engineering, Aerospace

Numerical Investigation on Single Bubble and Multiple Bubbles Growth and Heat Transfer During Flow Boiling in A Microchannel Using the VOSET Method

Kaikai Guo et al.

MICROGRAVITY SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Thermodynamics

Experimental and numerical study on bubble dynamics and heat transfer during nucleate boiling of FC-72

Zhizhu Cao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Local heat transfer of saturated flow boiling in vertical narrow microchannel

Wei Li et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Computational Fluid Dynamics Modeling of Flow Boiling in Microchannels With Nonuniform Heat Flux

Daniel Lorenzini et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Thermodynamics

A hierarchical manifold microchannel heat sink array for high-heat-flux two-phase cooling of electronics

Kevin P. Drummond et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Visualization of flow patterns and bubble behavior during flow boiling in open microchannels

Liaofei Yin et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Add to Collection

Review Thermodynamics

Review of computational studies on boiling and condensation

Chirag R. Kharangate et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Review Thermodynamics

Fundamental issues, mechanisms and models of flow boiling heat transfer in microscale channels

Lixin Cheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Frictional pressure drop correlation for two-phase flows in mini and micro multi-channels

Xuejiao Li et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Flow boiling in microchannels: Fundamentals and applications

T. G. Karayiannis et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Heat transfer during convective boiling inside microchannels

Fabio Toshio Kanizawa et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

A CFD study of the parameters influencing heat transfer in microchannel slug flow boiling

M. Magnini et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

Add to Collection

Article Thermodynamics

Adiabatic two-phase gas-liquid flow behaviors during upward flow in a vertical circular micro-channel

Sira Saisorn et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Two-Phase Microchannel Heat Sinks: Theory, Applications, and Limitations

Issam Mudawar

JOURNAL OF ELECTRONIC PACKAGING (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Modeling the evaporation of a hydrocarbon feedstock in the convection section of a steam cracker

Sandra C. K. De Schepper et al.

COMPUTERS & CHEMICAL ENGINEERING (2009)

Add to Collection

Article Thermodynamics

Simulation of refrigerant flow boiling in serpentine tubes

H. L. Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Add to Collection

Review Thermodynamics

An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels

Gherhardt Ribatski et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2006)

Add to Collection

Article Thermodynamics

Onset of nucleate boiling and active nucleation site density during subcooled flow boiling

N Basu et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.