☆ 4.6 Article

Lattice Boltzmann simulation of natural convection of ethylene glycol-alumina nanofluid in a C-shaped enclosure with MFD viscosity through a parallel computing platform and quantitative parametric assessment

PHYSICA SCRIPTA (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Multidisciplinary

Mesoscopic simulation of MHD mixed convection of non-newtonian ferrofluids with a non-uniformly heated plate in an enclosure

Amzad Hossain et al.

Summary: This study investigates the numerical simulation of magnetohydrodynamic mixed convection with a non-uniformly heated plate using the GPU-based lattice Boltzmann method. The influence of parameters such as Richardson number, Hartmann number, power-law index, ferroparticles volume fraction, and magnetic field angle on the flow phenomena and entropy generation are studied. The results show the relationship between the influential parameters and the average Nusselt number, as well as the total entropy generation.

PHYSICA SCRIPTA (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Study of the effect of magnetic field characteristics on Rayleigh-Taylor instability with density gradient layers

Cheng Peng et al.

Summary: It has been found that the magnetic Rayleigh-Taylor (R-T) instability can occur during the compression of a magnetized plasma target, affecting the fusion burn process. Simulation results show that the instability can be weakened or enhanced by introducing a direct current (DC) magnetic field or an alternating current (AC) magnetic field.

COMPUTERS & FLUIDS (2023)

Add to Collection

Article Mathematics, Applied

LBM-MHD Data-Driven Approach to Predict Rayleigh-Benard Convective Heat Transfer by Levenberg-Marquardt Algorithm

Taasnim Ahmed Himika et al.

Summary: This study aims to develop equations to predict the average rate of heat transfer quantitatively using lattice Boltzmann method (LBM)-magnetohydrodynamics (MHD) data. The approach considers a 2D rectangular cavity with adiabatic side walls and heated bottom wall. Rayleigh-Benard (RB) convection is considered as the heat transfer phenomenon within the cavity.

AXIOMS (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Analyses and reconstruction of the lattice Boltzmann flux solver

Jinhua Lu et al.

Summary: The lattice Boltzmann flux solver (LBFS) utilizes the finite volume method to update macroscopic variables and the local solution of the lattice Boltzmann equation to calculate fluxes at the cell interface. By recovering the macroscopic equations and proposing a reconstructed LBFS method, numerical stability is improved and computational efficiency is increased.

JOURNAL OF COMPUTATIONAL PHYSICS (2022)

Add to Collection

Review Thermodynamics

Applications of lattice Boltzmann method for double-diffusive convection in the cavity: a review

Sudhanshu Kumar et al.

Summary: This paper provides a brief review of the application of the lattice Boltzmann method in the study of double-diffusive convection. By computational approach, the application of double-diffusive convection in heated cavities is investigated, and empirical correlations for the average Nusselt numbers and average Sherwood numbers are discussed.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Construction & Building Technology

Thermal management and natural convection flow of nano encapsulated phase change material (NEPCM)-water suspension in a reverse T-shaped porous cavity enshrining two hot corrugated baffles: A boost to renewable energy storage

A. M. Zidan et al.

Summary: This study examines the storage of solar energy using phase change materials in a porous cavity with hot corrugated baffles. The results show that factors such as Rayleigh number, porosity, Darcy number, NEPCM particle volume fraction, length of baffles, and fusion temperature have an impact on heat transfer features and flow patterns.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Artificial neural network joined with lattice Boltzmann method to study the effects of MHD on the slip velocity of FMWNT/water nanofluid flow inside a microchannel

Xinlin He et al.

Summary: This research evaluates various methods to enhance the performance of microchannels using Artificial Neural Network (ANN) and lattice Boltzmann method (LBM). The study combines LBM with ANN to investigate the impact of magneto hydro dynamic (MHD) on slip velocity of nanofluid flow inside microchannels. The efficiency of the cooling system is increased by using multiple fins and applying a magnetic field to reduce thermal boundary layer and enhance heat transfer.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2022)

Add to Collection

Article Physics, Fluids & Plasmas

Unified lattice Boltzmann method with improved schemes for multiphase flow simulation: Application to droplet dynamics under realistic conditions

Geng Wang et al.

Summary: This study enhances the unified lattice Boltzmann method (ULBM) by incorporating a nonorthogonal moment set and the entropic-multi-relaxation-time lattice Boltzmann model for constructing the collision operator, along with an extended combined pseudopotential model to simulate multiphase flow with tunable surface tension at high-density ratios. The improved ULBM significantly reduces spurious velocities and adjusts surface tension without affecting the density ratio, and is validated through reproducing various droplet dynamics experiments. The study demonstrates the flexibility and effectiveness of ULBM in handling complex multiphase flow problems.

PHYSICAL REVIEW E (2022)

Add to Collection

Article Materials Science, Coatings & Films

Calendering analysis of non-isothermal viscous nanofluid containingCu-water nanoparticles using two co-rotating rolls

Zaheer Abbas et al.

Summary: This study conducts a non-isothermal analysis of the calendering process using a water-based nanofluid with Cu-nanoparticles. The impact of nanoparticle volume fraction on various parameters is discussed, showing enhancements in pressure, temperature distribution, power input, and roll-separating force for higher nanoparticle volume fractions. Model II of dynamic viscosity of nanofluid has a greater impact on physical parameters compared to Model I.

JOURNAL OF PLASTIC FILM & SHEETING (2021)

Add to Collection

Article Thermodynamics

Numerical studies on the influence of natural convection under inclination on optimal aluminium proportions and fin spacings in a rectangular aluminium finned latent-heat thermal energy storage

Lukas Kasper et al.

Summary: This study focused on the design optimization of rectangular aluminum-finned PCM cavities, conducting numerical analyses on melting and solidification processes and the impacts of different parameters on charging/discharging speeds. Guideline values for optimal aluminum ratio and fin spacing were obtained.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Development of a coupled simplified lattice Boltzmann method for thermal flows

Yuan Gao et al.

Summary: The simplified lattice Boltzmann method (SLBM) is a new method in the LBM community, offering lower cost and better numerical stability. The coupled simplified lattice Boltzmann method (CSLBM) independently solves the Navier-Stokes equations and the convection-diffusion equation for the hydrodynamic and temperature fields, coupling them using consistent forcing scheme. The proposed boundary treatment allows for analytical interpretation of the no-slip boundary condition, and the CSLBM has been validated for accuracy, efficiency, and stability in various test cases.

COMPUTERS & FLUIDS (2021)

Add to Collection

Article Physics, Multidisciplinary

Multiple-relaxation-time lattice Boltzmann simulation of free convection and irreversibility of nanofluid with variable thermophysical properties

Mashnoon Islam et al.

Summary: This study used the multiple-relaxation-time lattice Boltzmann method accelerated by GPU computing to investigate heat transfer and entropy generation of non-Newtonian power-law Al2O3-H2O nanofluids in a square enclosure. The research focused on the effects of fluid's effective thermal conductivity, viscosity, as well as temperature and rate of strain on heat transfer and entropy generation in natural convection.

PHYSICA SCRIPTA (2021)

Add to Collection

Article Thermodynamics

Natural convection improvement of PCM melting in partition latent heat energy storage: Numerical study with experimental validation

Mustafa S. Mahdi et al.

Summary: This study found that enhancing natural convection in a rectangular latent heat energy storage unit by increasing the number of partitions can shorten PCM melting time. However, there is a limit to the improvement ratio after reaching a certain number of partitions.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Physics, Multidisciplinary

Carreau ferrofluid flow with inclined magnetic field in an enclosure having heated cylinder

Sadia Siddiqa et al.

Summary: This study investigates the two-dimensional laminar flow of a non-Newtonian Carreau ferrofluid under the influence of a uniform inclined magnetic field in a square cavity with a stationary heated cylinder. The impact of nonlinear variation of the ferrofluid's viscosity on velocity and temperature distributions, heat transfer, and entropy generation is analyzed numerically. Results show that the inclined magnetic field, volume fraction, and power-law index can significantly alter the momentum and thermal fields and influence heat transfer rates and irreversibility. Additionally, the direction of the magnetic field can optimize the heat transfer rate, with the maximum rate achieved when the field is in the vertical direction.

PHYSICA SCRIPTA (2021)

Add to Collection

Article Education, Scientific Disciplines

Study on natural convection heat transfer in a closed cavity with hot and cold tubes

Jiyu Zheng et al.

Summary: The study investigates laminar natural convection with a pair of hot and cold tubes in a closed cubic cavity, focusing on the influence of Ra number, tube shape, and spatial position on heat transfer characteristics. Results show that Nu number increases with Ra number, with higher Nu numbers observed for circular and triangular shapes. Additionally, placing the cold tube above the hot tube among five spatial positions enhances heat transfer efficiency. These findings provide a theoretical basis for the performance of nuclear power plant containment passive residual heat removal system.

SCIENCE PROGRESS (2021)

Add to Collection

Article Engineering, Chemical

Hydrodynamic and heat transfer properties of magnetic fluid in porous medium considering nanoparticle shapes and magnetic field-dependent viscosity

Mohsen Izadi et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Materials Science, Coatings & Films

A theoretical analysis of roll-over-web coating assessment of viscous nanofluid containing Cu-water nanoparticles

Sabeeh Khaliq et al.

JOURNAL OF PLASTIC FILM & SHEETING (2020)

Add to Collection

Article Multidisciplinary Sciences

Lattice Boltzmann Simulation of MHD Rayleigh-Benard Convection in Porous Media

Taasnim Ahmed Himika et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Materials Science, Biomaterials

Feature of Entropy Generation in Cu-Al2O3/Ethylene Glycol Hybrid Nanofluid Flow Through a Rotating Channel

S. Das et al.

BIONANOSCIENCE (2020)

Add to Collection

Article Thermodynamics

Natural convection of hybrid nanofluids inside a partitioned porous cavity for application in solar power plants

Rasul Mohebbi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Thermodynamics

Natural convection of multi-walled carbon nanotube-Fe3O4/water magnetic hybrid nanofluid flowing in porous medium considering the impacts of magnetic field-dependent viscosity

S. A. M. Mehryan et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Engineering, Chemical

Determination of Brinkman Model Parameters Using Stokes Flow Model

S. K. Zaripov et al.

TRANSPORT IN POROUS MEDIA (2019)

Add to Collection

Article Physics, Multidisciplinary

Effect of magnetic field on mixed convection and entropy generation of hybrid nanofluid in an inclined enclosure: Sensitivity analysis and optimization

Ahmad Hajatzadeh Pordanjani et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Lattice Boltzmann simulation of TiO2-water nanofluid in a curved boundary domain at high Rayleigh numbers

M. Hosseini Abadshapoori et al.

COMPUTERS & FLUIDS (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Cubic-Interpolated Pseudo-particle model to predict thermal behavior of a nanofluid

Arman Safdari et al.

COMPUTERS & FLUIDS (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Boundary conditions with adjustable slip length for the lattice Boltzmann simulation of liquid flow

Liuming Yang et al.

COMPUTERS & FLUIDS (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Numerical investigation of heat transfer in a power-law non-Newtonian fluid in a C-Shaped cavity with magnetic field effect using finite difference lattice Boltzmann method

Saeed Aghakhani et al.

COMPUTERS & FLUIDS (2018)

Add to Collection

Article Thermodynamics

Effects of cavity and heat source aspect ratios on natural convection of a nanofluid in a C-shaped cavity using Lattice Boltzmann method

Mohsen Izadi et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2018)

Add to Collection

Article Engineering, Chemical

Lattice Boltzmann analysis of MHD natural convection of CuO-water nanofluid in inclined C-shaped enclosures under the effect of nanoparticles Brownian motion

Bouchmel Mliki et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Engineering, Chemical

Numerical study of natural convection of a water-alumina nanofluid in inclined C-shaped enclosures under the effect of magnetic field

N. Makulati et al.

ADVANCED POWDER TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Free convection of magnetic nanofluid considering MFD viscosity effect

M. Sheikholeslami et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Heat transfer and entropy generation analysis of nanofluids flow in an open cavity

Zouhaier Mehrez et al.

COMPUTERS & FLUIDS (2013)

Add to Collection

Article Mathematics, Applied

Lattice Boltzmann simulations of a time-dependent natural convection problem

Benoit Trouette

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2013)

Add to Collection

Article Mathematics, Applied

Lattice Boltzmann simulations of thermal convective flows in two dimensions

Jia Wang et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2013)

Add to Collection

Article Thermodynamics

Numerical study of natural convection of a nanofluid in C-shaped enclosures

Mostafa Mahmoodi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)

Add to Collection

Article Physics, Multidisciplinary

Double MRT thermal lattice Boltzmann method for simulating convective flows

Ahmed Mezrhab et al.

PHYSICS LETTERS A (2010)

Add to Collection

Article Physics, Applied

Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles

JA Eastman et al.

APPLIED PHYSICS LETTERS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.