Related references
Note: Only part of the references are listed.Simulation of hollow-cathode-nitriding plasma and design of diffusion equipment with DC and RF dual discharge
Zhehao Zhang et al.
PHYSICA SCRIPTA (2023)
Synthesis of biocompatible coating on Ni-Cr alloy by cathodic cage plasma processing technique as anti-pathogenic bacteria for medicinal applications
Muhammad Asghar et al.
PHYSICA SCRIPTA (2023)
Enhanced tribological behavior of VAlN hard ceramic coating with intermittent amorphous carbon layer
Yupeng Zhang et al.
CERAMICS INTERNATIONAL (2023)
Thermostability, oxidation, and high-temperature tribological properties of nano-multilayered AlCrSiN/VN coatings
Rui Wang et al.
CERAMICS INTERNATIONAL (2022)
The Expanded Phases in the Low-Temperature Treated Stainless Steels: A Review
Francesca Borgioli
METALS (2022)
Wear and corrosion studies of duplex surface-treated AISI-304 steel by a combination of cathodic cage plasma nitriding and PVD-TiN coating
M. Naeem et al.
CERAMICS INTERNATIONAL (2022)
Comparative study of structural and stoichiometric properties of titanium nitride films deposited by cathodic cage plasma deposition and magnetron sputtering
I. O. Nascimento et al.
EUROPEAN PHYSICAL JOURNAL PLUS (2022)
Improved saline corrosion and hydrogen embrittlement resistances of superaustenitic stainless steel by PIII nitriding
Bruna C. E. Schibicheski Kurelo et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Investigations on the Microstructure of an Aluminium Nitride Layer and Its Interface with the Aluminium Substrate (Part I)
Anja Buchwalder et al.
COATINGS (2022)
Hollow cathodic plasma source nitriding of AISI 4140 steel
Yang Li et al.
SURFACE ENGINEERING (2021)
The effect of nitriding on the humidity sensing properties of hydrogenated amorphous carbon films
Giuliano Frattini et al.
PHYSICA SCRIPTA (2021)
Effect of Active Screen Plasma Nitriding on Mechanical Properties of Spheroidal Graphite Cast Iron
Yasuhiro Hoshiyama et al.
METALS (2021)
Structure and Properties of ZrON Coatings Synthesized by Cathodic Arc Evaporation
Alexander S. Kuprin et al.
MATERIALS (2021)
Enhanced Wear Resistance of AISI-316 Steel by Low-Temperature Molybdenum Cathodic Cage Plasma Deposition
M. Naeem et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Investigating the effect of nitrogen on the structural and tribo-mechanical behavior of vanadium nitride thin films deposited using RF magnetron sputtering
Linda Aissani et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Surface modification of AISI-304 steel by ZnO synthesis using cathodic cage plasma deposition
W. Nogueira Junior et al.
MATERIALS RESEARCH EXPRESS (2021)
Improved Mechanical Properties, Wear and Corrosion Resistance of 316L Steel by Homogeneous Chromium Nitride Layer Synthesis Using Plasma Nitriding
J. C. Diaz-Guillen et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Mechanism of ion nitriding of 316L austenitic steel by active screen method in a hydrogen-nitrogen atmosphere
Tadeusz Fraczek et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Investigation of the ASPN process of low alloy steel by using Ni or Cr coated active screens
Dorina Kovacs et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Design, manufacturing and plasma nitriding of AISI-M2 steel forming tool and its performance analysis
A. G. F. Araujo et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Mechanism and properties of plasma nitriding AISI 420 stainless steel at low temperature and anodic (ground) potential
Hongyu Shen et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Assessment of the mechanical and tribological performance of a ZrN PVD coating
M. H. Staia et al.
SURFACE ENGINEERING (2019)
Application and evaluation of nitriding treatment using active screen plasma
Susumu Ichimura et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Cavitation erosion resistance enhancement of martensitic stainless steel via low-temperature plasma carburizing
F. da S. Severo et al.
WEAR (2019)
Enhanced wear and corrosion resistance of AISI-304 steel by duplex cathodic cage plasma treatment
M. Naeem et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Influence of film thickness and Ar-N2 plasma gas on the structure and performance of sputtered vanadium nitride coatings
Linda Aissani et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Short Time Ion Nitriding of AISI 420 Martensitic Stainless Steel to Improve Wear and Corrosion Resistance
Eugenia L. Dalibon et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2019)
Plasma Nitriding of AISI 304 Stainless Steel in Cathodic and Floating Electric Potential: Influence on Morphology, Chemical Characteristics and Tribological Behavior
Yang Li et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
The effect of argon admixing on nitriding of plain carbon steel in N-2 and N-2-H-2 plasma
M. Naeem et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Film thickness effect and substrate dependent tribo-mechanical characteristics of titanium nitride films
D. Dinesh Kumar et al.
SURFACES AND INTERFACES (2018)
Novel duplex cathodic cage plasma nitriding of non-alloyed steel using aluminum and austenite steel cathodic cages
M. Naeem et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Inductively Coupled Plasma Assisted Magnetron Sputtered Nanocrystalline Vanadium Nitride Coatings for Corrosion Protective Molds
Sung-Yong Chun
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2017)
Active screen cage pulsed dc discharge for implanting copper in polytetrafluoroethylene (PTFE)
Mujahid Zaka-ul-Islam et al.
MATERIALS RESEARCH EXPRESS (2017)
Process Optimization of the Preparation of Vanadium Nitride from Vanadium Pentoxide
Duan Xinhui et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2015)
Active screen plasma surface co-alloying of 316 austenitic stainless steel with both nitrogen and niobium for the application of bipolar plates in proton exchange membrane fuel cells
Kaijie Lin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Damage Mechanisms in AISI 304 Borided Steel: Scratch and Daimler-Benz Adhesion Tests
German Anibal Rodriguez-Castro et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Active screen plasma surface co-alloying treatments of 316 stainless steel with nitrogen and silver for fuel cell bipolar plates
Kaijie Lin et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Comparative tribological studies of duplex surface treated AISI 1045 steels fabricated by combinations of plasma nitriding and aluminizing
Farahnaz Haftlang et al.
MATERIALS & DESIGN (2014)
Validity of sputtering and re-condensation model in active screen cage plasma nitriding process
A. Saeed et al.
APPLIED SURFACE SCIENCE (2013)
Strong evidences of tempered martensite-to-nitrogen-expanded austenite transformation in CA-6NM steel
A. N. Allenstein et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Mechanical and electrochemical characterization of vanadium nitride (VN) thin films
J. C. Caicedo et al.
APPLIED SURFACE SCIENCE (2011)
Preferentially oriented vanadium nitride films deposited by magnetron sputtering
Tomasz Suszko et al.
MATERIALS LETTERS (2011)
Plasticity characterization of the modified layer produced by plasma nitrocarburizing of nanocrystallized 18Ni maraging steel
Y. Q. Wu et al.
VACUUM (2011)
Wear behaviour of TRD carbide coatings at elevated temperatures
Sukru Taktak et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2010)
Investigation of nitrogen mass transfer within an industrial plasma nitriding system I: The role of surface deposits
P. Hubbard et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Improved nanomechanical test techniques for surface engineered materials
B. D. Beake et al.
SURFACE ENGINEERING (2010)
A practical guide for analysis of nanoindentation data
Michelle L. Oyen et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2009)
Iridium Coatings with Titanium Sub-Layer Deposited by RF Magnetron Sputtering: Mechanical Properties and Contact Behavior with RoHS-Compliant Glass Melt
Jan Hagen et al.
PLASMA PROCESSES AND POLYMERS (2009)
Comparison of conventional and active screen plasma nitriding of hard chromium electroplated steel
M. Keshavarz Hedayati et al.
VACUUM (2009)
On the fundamental mechanisms of active screen plasma nitriding
Santiago Corujeira Gallo et al.
VACUUM (2009)
The structure of nitrogen-supersaturated ferrite produced by ball milling
J. Aufrecht et al.
PHILOSOPHICAL MAGAZINE (2008)
Ionic nitriding in cathodic cage of AISI 420 martensitic stainless steel
R. R. M. de Sousa et al.
SURFACE ENGINEERING (2008)
Identification of delamination failure of boride layer on common Cr-based steels
Sukru Taktak et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2006)
Titanium nitride/vanadium nitride alloy coatings: mechanical properties and adhesion characteristics
BA Latella et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Different approaches to superhard coatings and nanocomposites
S Veprek et al.
THIN SOLID FILMS (2005)
The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds
N Vidakis et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Deposition of TiN thin films on Si(100) by HCD ion plating
WJ Chou et al.
SURFACE & COATINGS TECHNOLOGY (2001)
A study of preferred orientation of vanadium nitride and zirconium nitride coatings on silicon prepared by ion beam assisted deposition
CH Ma et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Recent aspects concerning DC reactive magnetron sputtering of thin films: A review
I Safi
SURFACE & COATINGS TECHNOLOGY (2000)
Magnetron sputtering: a review of recent developments and applications
PJ Kelly et al.
VACUUM (2000)
Share Paper
