☆ 4.7 Article

Infrared thermographic imaging based real-time layer height estimation during directed energy deposition

OPTICS AND LASERS IN ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Interdisciplinary Applications

Real-time layer height estimation during multi-layer directed energy deposition using domain adaptive neural networks

Liu Yang et al.

Summary: In this study, a real-time layer height estimation technique is developed for laser direct energy deposition (DED) using a laser line scanner, vision camera, and domain adaptive neural networks (DaNN). The technique is able to efficiently estimate the layer height during corner deposition based on the multi-layer straight-line deposition data and the initial model constructed. The proposed technique has been validated by DED experiments, showing an average accuracy of 25.7 μm with a speed of 0.018 s for layer height estimation at corners with different angles.

COMPUTERS IN INDUSTRY (2023)

Add to Collection

Article Engineering, Multidisciplinary

Online geometry monitoring during directed energy deposition additive manufacturing using laser line scanning

Eden Binega et al.

Summary: Additive manufacturing (AM) is a powerful manufacturing technology with increasing demands, but controlling the geometry of deposited objects remains a challenge. This study developed an online geometry estimation methodology using a laser line scanner during the directed energy deposition (DED) process, allowing real-time scanning and comparison of as-designed and as-built models for high-precision prototypes.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Online melt pool depth estimation in laser metal deposition using a coaxial thermography system

Ikgeun Jeon et al.

Summary: An online melt pool depth estimation technique was developed in this study to accurately estimate the melt pool depth of laser metal deposition (LMD) parts. Real-time measurements of melt pool shape and temperature distribution were achieved using an infrared camera and a charge-coupled device camera, and the heat conduction equation induced by laser was solved to calculate the temperature distribution within the deposited layer, thus obtaining the melt pool depth.

JOURNAL OF LASER APPLICATIONS (2022)

Add to Collection

Article Engineering, Industrial

Motion feature based melt pool monitoring for selective laser melting process

Xin Lin et al.

Summary: The research highlights the importance of melt pool monitoring in the SLM process and introduces new motion features to accurately describe the variation of melt pool. By using clustering algorithm, the link between melt pool states and processing parameters is established for quality control purposes.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Real-time porosity reduction during metal directed energy deposition using a pulse laser

Hoon Sohn et al.

Summary: This study developed a real-time technique for reducing porosity in additive manufacturing by incorporating a pulse laser into a laser metal powder directed energy deposition (DED) system. The technique achieves porosity reduction by inducing accelerated and turbulent Marangoni flow, ultrasonic waves, and shock waves into the melt pool. It offers the advantages of noncontact, nondestructive, and real-time porosity reduction at the melt pool level without altering the geometry and grain structure of the printed samples.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Multidisciplinary

A thermodynamic framework for additive manufacturing, using amorphous polymers, capable of predicting residual stress, warpage and shrinkage

P. Sreejith et al.

Summary: A thermodynamic framework has been developed to predict residual stresses and warping in a class of amorphous polymers used in FDM. The distribution of residual stresses is influenced by shrinkage during cooling, which is incorporated by introducing isotropic shrinkage. The solidification process of the melt is simulated by significantly increasing viscosity.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2021)

Add to Collection

Article Optics

The influence of key process parameters on melt pool geometry in direct energy deposition additive manufacturing systems

Robert Sampson et al.

Summary: Measuring melt pool width is critical in additive manufacturing for developing advanced control systems and defect detection algorithms. Parametric studies are crucial in identifying optimal settings, requiring in-depth process/material knowledge. Understanding parametric interaction and melt pool mechanics is essential for developing state of the art additive manufacturing components.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Density and shrinkage evaluation of AISI 316L parts printed via FDM process

Mariangela Quarto et al.

Summary: Metal FDM process provides a cost-effective alternative to traditional metal Additive Manufacturing technologies. Experimental analysis shows that different process parameters can significantly affect the density and porosity of metal samples, with certain parameter combinations leading to higher nominal densities and lower levels of opened porosity.

MATERIALS AND MANUFACTURING PROCESSES (2021)

Add to Collection

Article Automation & Control Systems

Development of structured light 3D-scanner with high spatial resolution and its applications for additive manufacturing quality assurance

Rongxuan Wang et al.

Summary: Digital 3D scanning is an advanced metrology method that can aid in the evolution of manufacturing into smart manufacturing. However, commercially available systems have limitations that prevent direct use in process monitoring for smart manufacturing.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Automation & Control Systems

Vision-based real-time monitoring of extrusion additive manufacturing processes for automatic manufacturing error detection

Paschalis Charalampous et al.

Summary: This paper introduces a vision-based method to evaluate the performance of additive manufacturing by comparing physical printed parts with digital 3D models in real-time, addressing issues with defect detection and dimensional accuracy inspection.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Thermodynamics

Numerical investigation on heat transfer of melt pool and clad generation in directed energy deposition of stainless steel

Y. M. Zhang et al.

Summary: The directed energy deposition (DED) process is widely used in the additive manufacturing industry due to its advantages in rapid production of complex metallic parts and efficient cladding. A computational fluid dynamics model is proposed in this study to simulate melt pool generation and clad formation, evaluating the effect of surface active element-sulfur content on melt pool dynamics. Investigations on thermal evolutions of melt pool and solidification of the clad are systematically conducted to ensure accuracy and reliability of the proposed model.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Review Engineering, Industrial

Opportunities and challenges in additive manufacturing of functionally graded metallic materials via powder-fed laser directed energy deposition: A review

M. Ansari et al.

Summary: Additive manufacturing has been growing and changing the manufacturing paradigm, with functionally graded materials being a class of engineered materials. Laser directed energy deposition is capable of fabricating functionally graded metallic materials. Recent studies on the feasibility of AM-FGM for different metallic systems have increased, with a focus on processing, phase formation, and properties.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications

David Svetlizky et al.

Summary: Directed energy deposition (DED) is a branch of additive manufacturing (AM) processes that allows for site-specific deposition and repair, alloy design, and complex shape printing. This review critically examines recent advances in laser-material interactions, melt pool thermal behavior, and monitoring techniques, while also discussing critical processing variables, defect formation mechanisms, and high-end applications and challenges associated with DED processing.

MATERIALS TODAY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Measurements of thermophysical properties of solid and liquid NIST SRM 316L stainless steel

Peter Pichler et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Engineering, Multidisciplinary

Optical in-process height measurement system for process control of laser metal-wire deposition

Shigeru Takushima et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)

Add to Collection

Article Engineering, Industrial

Epitaxial laser deposition of single crystal Ni-based superalloys: Repair of complex geometry

Hao Chen et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Optics

Multi-physics modeling and Gaussian process regression analysis of cladding track geometry for direct energy deposition

Shuhao Wang et al.

OPTICS AND LASERS IN ENGINEERING (2020)

Add to Collection

Review Engineering, Manufacturing

Additive Manufacturing Review: Early Past to Current Practice

J. J. Beaman et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Engineering, Manufacturing

Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates

Brandon Lane et al.

INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2020)

Add to Collection

Article Automation & Control Systems

Closed loop control of melt pool width in robotized laser powder-directed energy deposition process

Meysam Akbari et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Online quality monitoring in material extrusion additive manufacturing processes based on laser scanning technology

Weiyi Lin et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Application of Directed Energy Deposition-Based Additive Manufacturing in Repair

Abdollah Saboori et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Data analytics approach for melt-pool geometries in metal additive manufacturing

Seulbi Lee et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2019)

Add to Collection

Article Optics

Monitoring of laser metal deposition height by means of coaxial laser triangulation

Simone Donadello et al.

OPTICS AND LASERS IN ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Melt pool boundary extraction and its width prediction from infrared images in selective laser melting

Liping Zheng et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Thermodynamics

Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing

W. Ou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Automation & Control Systems

Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V

Daniel Riedlbauer et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Optics

Morphologies, microstructures, and mechanical properties of samples produced using laser metal deposition with 316 L stainless steel wire

Xiang Xu et al.

OPTICS AND LASERS IN ENGINEERING (2017)

Add to Collection

Article Optics

Effect of layer thickness setting on deposition characteristics in direct energy deposition (DED) process

Do-Sik Shim et al.

OPTICS AND LASER TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process

V. Manvatkar et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Influence of Oxygen Partial Pressure on Surface Tension of Molten Type 304 and 316 Stainless Steels Measured by Oscillating Droplet Method Using Electromagnetic Levitation

Shumpei Ozawa et al.

ISIJ INTERNATIONAL (2014)

Add to Collection

Article Physics, Applied

Heat transfer and material flow during laser assisted multi-layer additive manufacturing

V. Manvatkar et al.

JOURNAL OF APPLIED PHYSICS (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Metal Additive Manufacturing: A Review

William E. Frazier

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Heat transfer and fluid flow in additive manufacturing

A. Raghavan et al.

JOURNAL OF LASER APPLICATIONS (2013)

Add to Collection

Article Engineering, Industrial

Modeling and control of a direct laser powder deposition process for Functionally Graded Materials (FGM) parts manufacturing

Pierre Muller et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)

Add to Collection

Article Optics

Height control of laser metal-wire deposition based on iterative learning control and 3D scanning

Almir Heralic et al.

OPTICS AND LASERS IN ENGINEERING (2012)

Add to Collection

Article Computer Science, Artificial Intelligence

Vision-based clad height measurement

Tyler A. Davis et al.

MACHINE VISION AND APPLICATIONS (2011)

Add to Collection

Article Optics

Increased stability in laser metal wire deposition through feedback from optical measurements

Almir Heralic et al.

OPTICS AND LASERS IN ENGINEERING (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.