☆ 4.5 Article

Structural, linear/nonlinear optical and electrical studies on PVP/CMC blend filled with hydrogen titanate nanotubes and TMAI

OPTICAL AND QUANTUM ELECTRONICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

Linear and nonlinear optical characteristics of PVA/CMC/PEG blended polymer loaded with ZnS formed at different temperatures

A. M. El-naggar et al.

Summary: Pure and loaded blends of polyvinyl alcohol/carboxymethyl cellulose/polyethylene glycol (PVA/CMC/PEG: 70/15/15%) with zinc sulfide (ZnS) were prepared at different temperatures and characterized. The loaded blends showed decreased optical energy values and a non-monotonic change in refractive index with wavelength. The nonlinear optical parameters reached their maximum values when loaded with ZnS prepared at 300 degrees C. The fluorescence emitted by the blended polymer depended on the temperature of the nanofiller.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2023)

Add to Collection

Article Engineering, Environmental

Graphene Nanoplatelets/TiO2 Hybrid Nanofiller Boosted PVA/CMC Blend Based High Performance Nanocomposites for Flexible Energy Storage Applications

A. A. Al-Muntaser et al.

Summary: Polymer nanocomposite samples based on a blend of polyvinyl alcohol/carboxymethyl cellulose and two nanofillers were prepared by solution casting. Characterization techniques revealed the morphology, structure, and physical properties of the nanocomposite films, highlighting their potential applications in micro-and optoelectronic techniques.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2023)

Add to Collection

Article Polymer Science

Improvement of Optical Properties of Functionalized Polyvinyl Alcohol-Zinc Oxide Hybrid Nanocomposites for Wide UV Optoelectronic Applications

Alaa M. M. Abd-Elnaiem et al.

Summary: The study investigated functionalized polyvinyl alcohol (PVA) based nanocomposite films containing 1-3 wt% zinc oxide (ZnO) nanoparticles (NPs). Structural and chemical bond analysis of the synthesized PVA-ZnO films was conducted using X-ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. The incorporation of ZnO NPs affected the structure and optical properties of the PVA films, including the optical band gap. The hybrid nanocomposites showed potential for use in various electronic applications due to their improved optical characteristics.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

The role of cobalt amount in ZnCdS nanofiller on the optical, thermal, dielectric and structure properties of PVA/PVP/PEG blends

A. M. El-naggar et al.

Summary: Undoped and doped PVA/PVP/PEG blends with nano Zn0.75-xCd0.25CoxS (x = 0, 0.05, 0.1, 0.15) were prepared and their structure and microstructure properties were analyzed. The presence of the nanofiller in the blend matrix was confirmed using XRD, FTIR and SEM techniques. The decomposition temperature and thermal stability of the blends were affected by the cobalt contents in the nanofiller. The optical properties and emitted fluorescence colors of the doped blends were influenced by the amount of cobalt. The electric dielectric constant, ac conductivity and electric modulus of the blends were also investigated.

OPTICAL AND QUANTUM ELECTRONICS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Optical and dielectric properties of PVC/TiO2/TBAI ionic liquid polymer electrolyte

Zein K. Heiba et al.

Summary: Polyvinyl chloride (PVC)/TiO2/x wt% tetrabutylammonium iodide (TBAI) polymers were prepared and their structure and characteristics were investigated. The loading of TiO2 and TBAI in PVC matrix was examined using various techniques. The impact of TiO2 and TBAI on the surface morphology of PVC was studied through SEM analysis. The potential use of PVC/TiO2/TBAI in UV shielding was explored, and the optical properties and luminescence intensity of the materials were enhanced by the addition of TiO2 and different weight percentages of TBAI.

OPTICAL MATERIALS (2023)

Add to Collection

Article Multidisciplinary Sciences

Impact of natural melanin doping on the structural, optical and dielectric characteristics of the PVP/CMC blend

A. M. El-naggar et al.

Summary: Undoped and doped polyvinyl pyrrolidone/ carboxymethyl cellulose (PVP/CMC: 50/50%) blended polymers with melanin were studied. X-ray diffraction analysis confirmed the amorphous nature of the blends. Scanning electron microscopy results showed smooth and homogeneous surfaces. The optical parameters, fluorescence spectra, and various electrical properties of the blended polymers were investigated as a function of melanin content.

JOURNAL OF TAIBAH UNIVERSITY FOR SCIENCE (2023)

Add to Collection

Article Multidisciplinary Sciences

Impact of MWCNTs on the structural, electrical, and optical characteristics of PVA/PANi blends

A. M. El-naggar et al.

Summary: Blends of polyvinyl alcohol (PVA)/0.25% polyaniline (PANi)/x wt % multi-walled carbon nanotubes (MWCNTs) were formed and their formation was investigated using X-ray diffraction technique. The effects of MWCNTs amounts on the optical parameters and emitted colours of the blends were studied. The optical band gaps of the blends were 3.24, 3.13, 3.05, 2.99, 2.84, and 2.95 eV for MWCNTs amounts of 0.0, 0.1, 0.2, 0.5, 0.8, and 1 wt%, respectively. Loading MWCNTs into PVA/PANi modified the optical band gaps, indicating the potential applications of the investigated blends in solar cell and photocatalysis. The blend with 0.8 wt% MWCNTs exhibited the highest DC conductivity. All blends showed two activation energies. The influence of MWCNTs amounts on the dielectric constant, AC conductivity, impedance, electric modulus, characteristic frequency, and Nyquist plot of the blends was examined.

JOURNAL OF TAIBAH UNIVERSITY FOR SCIENCE (2023)

Add to Collection

Article Materials Science, Ceramics

Optical, thermal and electrical characterization of PEO/CMC incorporated with ZnO/TiO2 NPs for advanced flexible optoelectronic technologies

H. M. Ragab

Summary: In this study, the optical, thermal, and electrical properties of a blend of polyethylene oxide (PEO) and carboxymethyl cellulose (CMC) were examined in relation to the effects of zinc oxide (ZnO) and titanium dioxide (TiO2) nanoparticles. The results showed that the nanocomposite films' crystallinity decreased with increasing ZnO/TiO2 NP concentrations. The inclusion of 7 wt% ZnO/TiO2 NPs decreased the polymer matrix's allowed direct energy gap. The AC conductivity results showed that the sigma(dc) of the nanocomposite samples decreased with increasing ZnO/TiO2 NPs concentrations.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Polymer Science

Impact of ZnS/Mn on the Structure, Optical, and Electric Properties of PVC Polymer

A. M. El-Naggar et al.

Summary: Doping mixed polymers with appropriate fillers is believed to be the most efficient method to create novel materials for optoelectronic applications. Undoped and doped PVC polymers with ZnS/Mn were fabricated at different temperatures, and their structure and microstructure were analyzed. The distribution of the nanofiller in the PVC matrix was determined using various techniques, and the effect of preparation temperatures on the optical properties of the PVC polymer was studied. Doping with ZnS/Mn decreased the optical band gaps and enhanced fluorescence intensity in the PVC.

POLYMERS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Structural, optical, and dielectric modulus properties of PEO/PVA blend filled with metakaolin

I. S. Elashmawi et al.

Summary: In this study, a PVA/PEO blend was prepared and modified by adding different weight percentages of metakaolin (MK). The results showed that MK addition altered the structure and optical properties of the blend. MK was found to be a suitable band-gap regulated optical material, and these composite materials could be used in flexible capacitors.

OPTICAL MATERIALS (2022)

Add to Collection

Article Optics

Structural, linear and nonlinear optical properties of poly (vinyl alcohol) (PVA)/polyethylene glycol (PEG)/SnS2:Y nanocomposite films

A. M. El-naggar et al.

Summary: In this study, a blend of Poly (vinyl alcohol), polyethylene glycol, and nano SnS2/Y was fabricated using thermolysis and casting procedures. The nanoscale properties of the filler SnS2/Y were examined through various techniques including XRD, SEM, TEM, and EDS. The results showed that loading the PVA/PEG blend with SnS2/Y had a significant influence on the structure and optical properties, with the fluorescence intensity and color depending on the ratios of the nanofiller.

OPTIK (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Ultraviolet sensor-based TiO2 nanorods/PProDOT-Pz conducting polymer using different bias voltage

Haile Liu et al.

Summary: In this study, TiO2 NRs and conducting polymer PProDOT-Pz were combined to fabricate UV photodetectors. The hybrid system showed high responsivity, large detectivity, fast time pulse response, and high EQE under low power UV illumination. The photodetector based on TiO2 NRs and PProDOT-Pz heterojunction proved to be an excellent candidate device with high sensitivity and fast response for UV signal.

OPTICAL MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Behavior of the Energy Levels of Hydrogen Titanate Nanotubes Decorated with Au, Ag, Mn, and Ni and Their Effect on the H2 Evolution

R. Camposeco et al.

Summary: The present study focuses on the synthesis and characterization of tubular hydrogen titanate nanotubes decorated with noble metal nanoparticles (Au, Ag, Mn, and Ni) for photocatalytic H-2 production. The results demonstrate that Au and Ag exhibit superior performance, with Au/NT catalyst showing the highest activity and good stability.

TOPICS IN CATALYSIS (2022)

Add to Collection

Article Polymer Science

Influence of potassium iodide in polyvinyl alcohol-based gel polymer electrolyte for efficiency enhancement of dye-sensitized solar cells

M. F. Aziz et al.

Summary: This study investigates the impact of small cations on the conductivity and efficiency of dye-sensitized solar cells (DSSCs). The addition of a small cation, potassium iodide (KI), to the gel polymer electrolyte significantly improves the conductivity, resulting in enhanced performance of DSSCs.

JOURNAL OF POLYMER RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of nano TiO2 on the thransport, structural and thermal properties of PEMA-NaI solid polymer electrolytes for energy storage devices

S. Jayanthi et al.

Summary: The addition of nano TiO2 to polymer electrolytes has successfully increased the ionic conductivity, as confirmed by various characterization techniques. The studies also showed the mixing of polymer and salt, decrease in crystallinity, and thermal stability of the membranes.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation of PVA/CMC/PVP blended polymer loaded with ZnS1-xCux; investigation of structural and linear/nonlinear optical properties

A. M. El-naggar et al.

Summary: Nonstoichiometric ZnS1-xCux powders were loaded into blended polymers using casting method. X-ray diffraction Rietveld analysis, SEM and EDS analysis were used to study the structure and surface morphology of the nanofiller. The UV-vis diffuse reflectance was utilized to investigate the optical properties, and fluorescence intensity and emitted colors were also investigated.

OPTICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Impact of loading PVA/CMC/PVP blend with CdS0.9M0.1 non-stoichiometrically doped by transition metals (M)

A. M. El-naggar et al.

Summary: In this study, PVA/CMC/PVP/CdS0.9M0.1 composites were prepared and characterized. Loading CdS0.9M0.1 had a significant impact on the optical parameters and emitted fluorescence features of the PVA/CMC/PVP blend.

OPTICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Improving the refractive index by engineering PbS/PVA nano polymer composite for optoelectronic applications

Mai S. Ismail et al.

Summary: This study focused on enhancing optical parameters of PVA polymer by incorporating PbS nanoparticles. Doping PbS nanoparticles can decrease the optical bandgap of PVA films and increase the refractive index values, with the 3% doped sample showing the optimal refractive index value.

OPTICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of nanocomposite (1-x)CdS/xCuS on optical characteristics of PVA/CMC/PEG blended polymer; effect of ratio (x)

A. M. El-naggar et al.

Summary: PVA/CMC/PEG blended polymers loaded with (1-x)CdS/xCuS nanocomposites were prepared using thermolysis and casting techniques. The optical properties were investigated, and it was found that loading CdS-CuS nanocomposites reduced the optical band gaps and increased the refractive index of the blends. The fluorescence intensity was enhanced with the introduction of CuS nanocomposites.

OPTICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Ultraviolet photodetectors based on TiO2 nanorod arrays/PEDOT-type conducting polymers

Yuzhu Che et al.

Summary: In this study, TiO2 nanorod arrays/PEDOT-type conducting polymers composites were prepared and used for UV photodetectors. The composites showed good rectification behavior, with PProDOT/TiO2 NRAs exhibiting better UV photodetection performance compared to PEDOT/TiO2 NRAs. The interaction between the polymer films and TiO2 NRAs played a crucial role in enhancing the photocurrent response performance of the composites.

OPTICAL MATERIALS (2021)

Add to Collection

Article Optics

Optical linearity and nonlinearity, structural morphology of TiO2-doped PMMA/FTO polymeric nanocomposite films: Laser power attenuation

T. H. AlAbdulaal et al.

Summary: This study suggests a novel optical nanocomposite PMMA with TiO2 nanoparticles synthesized using a cost-effective spin coating technique. Analysis using XRD and FTIR methods revealed optimized optical properties and morphology structure for potential optoelectronic device applications.

OPTIK (2021)

Add to Collection

Article Polymer Science

Electronic properties of PVP-ionic liquid composite: spectroscopic and DFT-based thermochemical studies on the effect of anions

Aswathy Joseph et al.

Summary: The study compared the effects of different anions with N-butylpyridinium cation on the electronic and thermal properties of the polymer. The results showed that Br- ions were more effective in improving the electronic properties of PVP-based polymer and resulted in more uniform thermal polymerization compared to BF4- ions.

IRANIAN POLYMER JOURNAL (2021)

Add to Collection

Article Materials Science, Ceramics

Ultrahigh energy density of polymer nanocomposites containing electrostatically self-assembled graphene oxide and hydrotalcite nanosheets

Deshuai Zhu et al.

Summary: In this study, a nanofiller composed of GO and HT was fabricated and incorporated into the PI matrix to prepare superior nanocomposite films with high energy storage density. Through electrostatic self-assembly, the contact area between graphene oxides was reduced, inhibiting the formation of conductive networks and increasing the energy storage density of the nanocomposite films.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

In-situ synthesized porphyrin polymer/TiO2 composites as high-performance Z-scheme photocatalysts for CO2 conversion

Yue Zhang et al.

Summary: In this study, TiO2 nanoparticles were composited with covalent porphyrin polymers to enhance the photocatalytic activity of CO2 conversion. The composite of sulfonated hollow COP-P and TiO2 showed the best performance with a CO production rate of 5.70 μmol.g(-1).h(-1). A Z-scheme photocatalytic mechanism was proposed to explain the working principle of the composite material.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Synthesis, thermal and dielectric performance of PVA-SrTiO3 polymer nanocomposites

T. A. Taha et al.

Summary: The paper discusses the successful production of PVA-SrTiO3 nanocomposite films through the conventional solution-mixing route, showcasing improved thermal stability and dielectric properties. The addition of nano-SrTiO3 altered the position of PVA absorption bands and the dielectric constant varied with SrTiO3 content, reaching its peak at 15.0 wt%. Energy density of the composite films was lower than pure PVA, and both AC and DC electrical conductivity showed slight changes with SrTiO3 concentration.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancement of optical and electrical properties of PVC/PMMA blend films doped with Li4Ti5O12 nanoparticles

A. A. Al-Muntaser et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal, photocatalytic, and antibacterial properties of calcinated nano-TiO2/polymer composites

Derya Tekin et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Surface and electro-optical properties of amorphous Sb2S3 thin films

Necmi Serkan Tezel et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)

Add to Collection

Article Chemistry, Physical

Thermal, optical, and dielectric investigations of PVC/La0.95Bi0.05FeO3 nanocomposites

T. A. Taha et al.

JOURNAL OF MOLECULAR STRUCTURE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Structural, optical, thermal, and dielectric properties of polyethylene oxide/carboxymethyl cellulose blend filled with barium titanate

M. A. Morsi et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Nonlinear optical and dielectric properties of TiO2 nanoparticles incorporated PEO/PVP blend matrix based multifunctional polymer nanocomposites

Ram Jeewan Sengwa et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Nanosecond laser-irradiation assisted the improvement of structural, optical and thermal properties of polyvinyl pyrrolidone/carboxymethyl cellulose blend filled with gold nanoparticles

M. A. Morsi et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A new process to synthesize CrSe thin films with nanosize by CBD method

Fatma Meydaneri Tezel et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Materials Science, Composites

Enhancement of dielectric constant in polymer-ceramic nanocomposite for flexible electronics and energy storage applications

Sunil Kumar et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Effect of lithium titanate nanoparticles on the structural, optical, thermal and electrical properties of polyethylene oxide/carboxymethyl cellulose blend

M. A. Morsi et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Add to Collection

Article Chemistry, Physical

Promotional effect of Rh nanoparticles on WO3/TiO2 titanate nanotube photocatalysts for boosted hydrogen production

R. Camposeco et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen titanate nanotubes for dye sensitized solar cells applications: Experimental and theoretical study

Fernando Pignanelli et al.

MATERIALS RESEARCH BULLETIN (2018)

Add to Collection

Article Chemistry, Physical

Correlation between Properties and Conductivity Mechanism in Poly(vinyl alcohol)-based Lithium Solid Electrolytes

Gioele Pagot et al.

SOLID STATE IONICS (2018)

Add to Collection

Article Polymer Science

Luminescent and UV-Shielding ZnO Quantum Dots/Carboxymethylcellulose Sodium Nanocomposite Polymer Films

Tianyi Li et al.

POLYMERS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced dielectric properties due to space charge-induced interfacial polarization in multilayer polymer films

Xinyue Chen et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Structural and dielectric properties of NaIO4 - Complexed PEO/PVP blended solid polymer electrolytes

H. K. Koduru et al.

CURRENT APPLIED PHYSICS (2017)

Add to Collection

Article Energy & Fuels

Characterization of titanate nanotubes for energy applications

Luciana Fernandez-Werner et al.

JOURNAL OF ENERGY STORAGE (2017)

Add to Collection

Article Chemistry, Physical

Electrical and optical properties of hydrogen titanate nanotube/PANI hybrid nanocomposites

Nasser Y. Mostafa et al.

COLLOID AND POLYMER SCIENCE (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Electrical conductivity and dielectric characteristics of in situ prepared PVA/HgS nanocomposite films

Omed Gh. Abdullah et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

Add to Collection

Article Chemistry, Physical

Ultrasound-assisted electrodeposition of SnS: Effect of ultrasound waves on the physical properties of nanostructured SnS thin films

Hosein Kafashan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Chemistry, Physical

Poly(vinyl pyrrolidone) Mediated Solubilization and Stabilization of Fullerene C60 in the Form of Nanofluid in an Alcoholic Medium

M. Behera et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2015)

Add to Collection

Article Chemistry, Physical

Combined DFT/FTIR structural studies of monodispersed PVP/Gold and silver nano particles

A. M. Abdelghany et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Engineering, Multidisciplinary

Dielectric and FTIR studies on blending of [xPMMA-(1-x)PVC] with LiTFSI

S. Ramesh et al.

MEASUREMENT (2013)

Add to Collection

Article Physics, Condensed Matter

The visible light absorption property of Cu-doped hydrogen titanate nanotube thin films: An experimental and theoretical study

Yongliang An et al.

PHYSICA B-CONDENSED MATTER (2013)

Add to Collection

Article Nanoscience & Nanotechnology

The Effect of Polyvinylpyrrolidone on the Optical Properties of the Ni-Doped ZnS Nanocrystalline Thin Films Synthesized by Chemical Method

Tran Minh Thi et al.

JOURNAL OF NANOMATERIALS (2012)

Add to Collection

Article Cell Biology

In Situ Fluorescence Imaging of Myelination

Changning Wang et al.

JOURNAL OF HISTOCHEMISTRY & CYTOCHEMISTRY (2010)

Add to Collection

Article Instruments & Instrumentation

Total pattern fitting for the combined size-strain-stress-texture determination in thin film diffraction

Luca Lutterotti

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Protonated titanates and TiO2 nanostructured materials:: Synthesis, properties, and applications

Dmitry V. Bavykin et al.

ADVANCED MATERIALS (2006)

Add to Collection

Article Chemistry, Inorganic & Nuclear

A study on the structure and thermal stability of titanate nanotubes as a function of sodium content

Edisson Morgado et al.

SOLID STATE SCIENCES (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.