4.7 Article

An integrated model for offshore wind turbine monopile in porous seabed under multi-directional seismic excitations

Journal

OCEAN ENGINEERING
Volume 285, Issue -, Pages -

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.oceaneng.2023.115250

Keywords

Monopile; Offshore wind turbine; Transient liquefaction; Dynamic response; Vertical ground motion

Ask authors/readers for more resources

This study presents a comprehensive three-dimensional time-domain finite element model to analyze the behavior of offshore wind turbines (OWTs) on monopiles in porous seabed under multi-directional seismic excitations. The model considers the dynamic interaction between the soil skeleton and pore water using Biot's u-p formulation and accurately represents fluid-structure interaction (FSI) using potential-based fluid elements for seawater. The study verified the model's reliability by analyzing the vibration characteristics, displacement, and excess pore water pressure of the OWT-monopile-seabed-seawater system under both horizontal and vertical excitation. The results showed variations in hydrodynamic pressure and excess pore water pressure along the OWT and pile, changes in transient liquefaction distribution with the addition of EW component ground motion, substantial fluctuations of vertical displacement and larger areas of transient liquefaction near the surface of the seabed and the tip of the pile under vertical ground motion, and resonance effects near the first natural frequency of the OWT leading to extreme acceleration and displacement.
This study proposes an integrated three-dimensional time-domain finite element model for offshore wind turbine (OWT) monopile in porous seabed under multi-directional seismic excitations. Biot's u-p formulation is used to describe the dynamic interaction between the soil skeleton and pore water. Potential-based fluid elements are used for seawater to accurately model fluid-structure interaction (FSI). Moreover, FSI interface elements are applied to the interface of seawater and pile and to the interface of seawater and mud line. To analyze the response of the OWT-monopile-seabed-seawater system to multi-directional seismic excitations, a viscous-spring artificial boundary is implemented in the finite element model. The integrated model was sufficiently verified in terms of the vibration characteristics of OWTs, the displacement and the excess pore water pressure using implemented viscoelastic artificial boundary, and the FSI interaction under both horizontal and vertical excitation. The results indicated that: (1) The hydrodynamic pressure and the excess pore water pressure varied with different positions along the OWT and the pile; (2) Adding the excitation of the EW component ground motion caused the change of the distribution of transient liquefaction with respect to that under the excitation of only NS component ground motion; (3) The vertical ground motion caused a substantial fluctuation of the vertical displacement of the OWT and larger area of transient liquefaction near the surface of the seabed and near the tip of the pile; (4) resonance occurred when the frequency of input motion was approaching to the first natural frequency of OWT, leading to extremely large acceleration and displacement of OWT.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available