4.7 Article

A semicircular wall for harvesting wind energy from vortex-induced vibration and galloping

Related references

Note: Only part of the references are listed.
Review Engineering, Marine

A review of energy extraction from wind and ocean: Technologies, merits, efficiencies, and cost

Shafiqur Rehman et al.

Summary: This article reviews the feasibility of wind and ocean power technologies and shares the acceptance and challenges in their development. It also discusses the energy harvesting techniques for onshore and offshore wind energy, as well as various forms of ocean energy. The efficiency, availability, and costs of these technologies are compared and evaluated.

OCEAN ENGINEERING (2023)

Article Engineering, Mechanical

Dynamic response mechanism of the galloping energy harvester under fluctuating wind conditions

Ming Xu et al.

Summary: The study investigates the dynamic characteristics of the galloping energy harvester by separating wind speed into mean and fluctuating components, considering the latter as Gaussian white noise. Decoupling the output voltage using a generalized harmonic transformation and deriving mean output power through stochastic averaging are key approaches employed. Critical wind speed and optimal parameters of the harvester were determined, with the analytical procedure validated through Monte Carlo simulation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Chemistry, Physical

Vortex-induced vibration triboelectric nanogenerator for low speed wind energy harvesting

Lanbin Zhang et al.

Summary: In this study, a novel vortex-induced vibration (VIV) based triboelectric nanogenerator (TENG) is proposed for efficient energy harvesting from low-speed wind. A theoretical model is constructed and validated by experiments to investigate the vibration response and output voltage of the VIV-TENG varying with wind speed. It is found that there is a lock-in region with large vibration amplitude and output voltage. Furthermore, a new model of tandem vortex-induced vibration TENG is designed to broaden the lock-in region.

NANO ENERGY (2022)

Article Engineering, Civil

Harvesting airflow energy from circular cylinder wake via a thin polyvinylidene fluoride film

Kun Lei et al.

Summary: This paper presents a new piezoelectric wind energy harvester (PWEH) to improve the characteristics of airflow energy harvesting. Experimental investigations were conducted with different parameters, and the results showed that the PWEH performed optimally with resonance, and the PVDF film inhibited vortex shedding. The diameter of the circular cylinder and the matching of load resistance also played important roles in the performance.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2022)

Article Engineering, Marine

Nonlinear wave energy dissipator with wave attenuation and energy harvesting at low frequencies

Haicheng Zhang et al.

Summary: This paper investigates a new type of negative stiffness mechanism for wave attenuation and energy harvesting, and proposes a method to solve the nonlinear wave-structure interaction problem.

OCEAN ENGINEERING (2022)

Article Engineering, Marine

Design of vibro-impact electromagnetic ocean-wave energy harvesting system; an experimental study

Aref Afsharfard et al.

Summary: This study presents a new ocean wave energy harvester that utilizes the small pitch motion of moving floaters. It differs from previous systems in that it can work in moving ships and boats. By utilizing an ibro-impact system and a mechanical rectifier, the harvester converts the kinetic energy of ocean waves into electrical energy.

OCEAN ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Hybrid energy harvesting technology: From materials, structural design, system integration to applications

Huicong Liu et al.

Summary: Advancements in the past decade have led to significant progress in hybrid energy harvesting technology, combining energy sources and conversion mechanisms to improve power output. Vibration and thermal energy harvesters play a dominant role in hybrid energy harvesting.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Thermodynamics

Harvesting more energy from variable-speed wind by a multi-stable configuration with vortex-induced vibration and galloping

Zhiyong Zhou et al.

Summary: The novel multi-stable harvester aims to scavenge more energy from variable-speed wind by integrating galloping and vortex-induced vibration. Adjusting the distance between magnets can create bi-stability or tri-stability, with the tri-stable configuration outperforming the bi-stable one in wind energy harvesting performance. The tri-stable energy harvester can significantly enhance output voltage and generate large outputs by executing snap-through motions for wind speeds above 1.0 m s(-1).

ENERGY (2021)

Article Physics, Applied

Harvesting wind energy with a bi-stable configuration integrating vortex-induced vibration and galloping

Yuansheng Wang et al.

Summary: This paper introduces a wind energy harvester that combines VIV, galloping, and multi-stability, demonstrating through validation experiments its ability to maintain a large output in variable-speed wind environments.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Article Thermodynamics

Stochastic analysis of a galloping-random wind energy harvesting performance on a buoy platform

Kai Yang et al.

Summary: A new concept of a wind energy harvester based on galloping and stochastic vibration energy is proposed and comprehensively investigated through wind tunnel experiments and theoretical study, showing that strong stochastic excitation intensity is beneficial for broadband energy harvesting. The study also reveals that a low structural natural frequency and a large aerodynamic mass ratio can improve harvester performance.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Engineering, Marine

A hybrid wind and rainwater energy harvesting system for applications in sea-crossing bridges

Hao Cao et al.

Summary: This paper presents a self-powered system for a sea-crossing bridge using a hybrid wind energy and rainwater energy harvester (WEREH). The system includes energy collection, conversion, and storage modules, allowing flexible energy collection and storage under different weather conditions to supply power for low-power sensors. Experimental results demonstrate the feasibility and effectiveness of the system in generating electricity for at least 239.95 days for displacement sensors and 254809.18 days for low-power temperature sensors.

OCEAN ENGINEERING (2021)

Article Engineering, Marine

Improved bistable mechanism for wave energy harvesting

Bingqi Liu et al.

Summary: The study introduces an improved bistable mechanism to enhance the performance of wave energy converters, featuring a wider low equivalent stiffness range, improved frequency shifting ability, efficiency and robustness. The improved mechanism serves as an efficient alternative to explore the benefits of bistable dynamics applied to wave energy converters.

OCEAN ENGINEERING (2021)

Article Engineering, Marine

Piezoelectric energy harvesting from vortex-induced vibration of a circular cylinder: Effect of Reynolds number

Mingjie Zhang et al.

Summary: This study investigates the impact of Reynolds number on piezoelectric energy harvesting from vortex-induced vibrations of a circular cylinder. Results show that Reynolds number not only affects power levels and global branches of the bifurcation diagram, but also has a greater impact on performance in cases with low mechanical damping ratios.

OCEAN ENGINEERING (2021)

Article Thermodynamics

A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibration

Wan Sun et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Review Energy & Fuels

The state-of-the-art review on energy harvesting from flow-induced vibrations

Junlei Wang et al.

APPLIED ENERGY (2020)

Article Thermodynamics

Hybrid wind energy scavenging by coupling vortex-induced vibrations and galloping

Junlei Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Acoustics

Modeling and nonlinear analysis of stepped beam energy harvesting from galloping vibrations

Jiantao Zhang et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Review Instruments & Instrumentation

A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008-2018)

Mohsen Safaei et al.

SMART MATERIALS AND STRUCTURES (2019)

Article Engineering, Marine

Application of a flexible device coating with piezoelectric paint for harvesting wave energy

Hidemi Mutsuda et al.

OCEAN ENGINEERING (2019)

Article Construction & Building Technology

Piezoelectric energy harvesting from vortex shedding and galloping induced vibrations inside HVAC ducts

Francesco Petrini et al.

ENERGY AND BUILDINGS (2018)

Article Engineering, Mechanical

A numerical investigation on piezoelectric energy harvesting from Vortex-Induced Vibrations with one and two degrees of freedom

Guilherme R. Franzini et al.

JOURNAL OF FLUIDS AND STRUCTURES (2018)

Article Nanoscience & Nanotechnology

Galloping-based energy harvester considering enclosure effect

Soohwan Jo et al.

AIP ADVANCES (2018)

Article Acoustics

Design and experimental analysis of broadband energy harvesting from vortex-induced vibrations

L. B. Zhang et al.

JOURNAL OF SOUND AND VIBRATION (2017)

Article Engineering, Marine

A fully-activated flapping foil in wind gust: Energy harvesting performance investigation

Yongliang Chen et al.

OCEAN ENGINEERING (2017)

Article Physics, Applied

Enhanced performance of wind energy harvester by aerodynamic treatment of a square prism

Gang Hu et al.

APPLIED PHYSICS LETTERS (2016)

Article Engineering, Mechanical

Hydroelastic Buffeting Assessment Over a Vertically Hinged Flat Plate

M. Armandei et al.

EXPERIMENTAL TECHNIQUES (2016)

Article Thermodynamics

Flow induced motion and energy harvesting of bluff bodies with different cross sections

Lin Ding et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Article Engineering, Mechanical

Transverse galloping of circular cylinders fitted with solid and slotted splitter plates

Gustavo R. S. Assi et al.

JOURNAL OF FLUIDS AND STRUCTURES (2015)

Article Physics, Applied

Exploiting a nonlinear restoring force to improve the performance of flow energy harvesters

Amin Bibo et al.

JOURNAL OF APPLIED PHYSICS (2015)

Article Engineering, Mechanical

Shape optimization of a blunt body Vibro-wind galloping oscillator

J. M. Kluger et al.

JOURNAL OF FLUIDS AND STRUCTURES (2013)

Article Instruments & Instrumentation

Comparison of modeling methods and parametric study for a piezoelectric wind energy harvester

Liya Zhao et al.

SMART MATERIALS AND STRUCTURES (2013)

Article Engineering, Marine

VIV and galloping of single circular cylinder with surface roughness at 3.0 x 104 ≤ Re ≤ 1.2 x 105

Che-Chun (Jim) Chang et al.

OCEAN ENGINEERING (2011)

Article Engineering, Mechanical

Vibration frequency and lock-in bandwidth of tensioned, flexible cylinders experiencing vortex shedding

L. Lee et al.

JOURNAL OF FLUIDS AND STRUCTURES (2010)

Article Acoustics

Consideration of impedance matching techniques for efficient piezoelectric energy harvesting

Hyeoungwoo Kim et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2007)