☆ 4.7 Article

Vibration response and isolation of X-shaped two-stage vibration isolators: Analysis of multiple parameters

NONLINEAR DYNAMICS (2023)

Related references

Note: Only part of the references are listed.

Article Mathematics, Applied

Traditional and non-traditional active nonlinear vibration absorber with time delay combination feedback for hard excitation

S. Mohanty et al.

Summary: In this work, a modified traditional and non-traditional active nonlinear vibration absorber (ANVA) is used to suppress the vibration of a base excited nonlinear spring-mass primary system subjected to simultaneous external hard harmonic and parametric excitations. The ANVA consists of a mass, time delayed damper, PZT stack actuator, and linear/nonlinear spring. The ANVA utilizes various combinations of time delayed displacement, velocity, and acceleration feedback gains for vibration reduction. The governing equations are derived and solved using the method of multiple scales, and the results are compared with numerical methods, showing good agreement. Parametric analyses are conducted to investigate stable and unstable regions of operating frequencies, and it is shown that 100% vibration reduction can be achieved for a certain range of operating frequencies.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2023)

Add to Collection

Article Engineering, Multidisciplinary

Investigating the performance of tri-stable magneto-piezoelastic absorber in simultaneous energy harvesting and vibration isolation

Masoud Rezaei et al.

Summary: Tri-stable magneto-piezoelastic oscillators show superior performance in terms of resonance frequency and excitation threshold compared to linear and bi-stable systems. By investigating the potential of these oscillators for simultaneous vibration suppression and energy harvesting, this study introduces a tri-stable magnetopiezoelastic absorber. The absorber, utilizing magnetic elements, demonstrates nonlinear restoring forces and is effective in various excitation scenarios.

APPLIED MATHEMATICAL MODELLING (2022)

Add to Collection

Article Mechanics

Modeling and analysis of a novel multi-directional micro-vibration isolator with spring suspension struts

Tao Yang et al.

Summary: A novel spring suspension strut with quasi-zero-stiffness (QZS) and zero-stiffness (ZS) properties is proposed to improve the performance of the multi-directional micro-vibration isolator in this work. The strut, based on a hexagon structure with negative stiffness mechanism, counteracts the positive stiffness of a vertical suspension spring while providing high loading capacity and equilibrium stability. The effectiveness of the micro-vibration isolator in all 6-degrees-of-freedom is notably improved by lowering the isolation frequency.

ARCHIVE OF APPLIED MECHANICS (2022)

Add to Collection

Article Acoustics

On the combined Shooting-Pseudo-Arclength method for finding frequency response of nonlinear fractional-order differential equations

Ehsan Loghman et al.

Summary: This paper presents a numerical method for amplitude-frequency curves of nonlinear fractional differential equations, based on the combined Shooting and Pseudo-Arclength methods. The proposed Shooting-Pseudo-Arclength (SPA) method shows better agreement with numerical simulations compared to other methods, offering techniques to enhance accuracy and reduce computational time. The method is applicable for both stable and unstable solutions of fractional and partial fractional differential equations.

JOURNAL OF SOUND AND VIBRATION (2022)

Add to Collection

Article Engineering, Mechanical

A Computational Method for Simulating Mesoscale Competitive Fracture Process of Heterogeneous Quasi-brittle Building Materials

Bin Sun et al.

Summary: A computational method was developed to simulate the competitive mesoscale fracture process of quasi-brittle materials, considering real material heterogeneity and stress redistribution. The simulation results showed the effectiveness of the method in simulating fracture processes and studying fracture mechanisms. An image-based and random lattice modeling strategy was used to improve crack path prediction and reduce simulation errors caused by regular lattice modeling.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Nonlinear vibration isolation via a compliant mechanism and wire ropes

Mu-Qing Niu et al.

Summary: This research proposes a novel nonlinear isolator with negative stiffness compliant mechanism and wire ropes with hysteretic damping, achieving a lower resonant frequency and smaller resonant amplitude, which is more suitable for broad band vibration isolation and fewer harmonics. However, the wire ropes improve high-frequency isolation efficiency at the cost of a higher resonant frequency.

NONLINEAR DYNAMICS (2022)

Add to Collection

Article Engineering, Mechanical

Cockroach-inspired structure for low-frequency vibration isolation

Peng Ling et al.

Summary: This paper presents a cockroach-inspired structure for low-frequency vibration isolation. By mimicking the body topology of cockroaches, the structure exhibits nonlinear properties that can significantly reduce resonant frequency and peak transmissibility. It provides a high-stability and cost-effective solution for low-frequency vibration isolation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Nonlinear vibration isolation via an innovative active bionic variable stiffness adapter (ABVSA)

Xuyuan Song et al.

Summary: This study proposes an innovative active bionic variable stiffness adapter (ABVSA) to improve the extreme vibration environment during spacecraft launch. The benefits of ABVSA are explored and the influence of its parameters is investigated in detail.

NONLINEAR DYNAMICS (2022)

Add to Collection

Article Engineering, Mechanical

Beneficial effects of antisymmetric nonlinear damping with application to energy harvesting and vibration isolation under general inputs

Yun-Peng Zhu et al.

Summary: This study investigates the beneficial effects of nonlinear damping on energy harvesting and vibration isolation, and concludes that introducing nonlinear damping can improve energy harvester performance and reduce vibration, especially under general input conditions.

NONLINEAR DYNAMICS (2022)

Add to Collection

Article Engineering, Multidisciplinary

A comprehensive diagnostic system for vehicle suspensions based on a neural classifier and wavelet resonance estimators

Rafal Burdzik

Summary: This paper presents a comprehensive diagnostic system for vehicle suspension, using an advanced algorithm and neural classifier to predict and identify damages. The development of quantitative damage identification methods and wavelet classifiers, as well as the concept of a comprehensive system, are the important findings of this study.

MEASUREMENT (2022)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigation of a vertical vibration isolator for seismic applications

Fatemeh Eskandary-Malayery et al.

Summary: Reducing vertical acceleration in seismic engineering remains a challenge, and practical protection systems are elusive. This study presents the performance of a HSLDSS isolation system under vertical excitation and explores its potential as a QZSS.

NONLINEAR DYNAMICS (2022)

Add to Collection

Article Engineering, Mechanical

Nonlinear dynamic behavior of a bio-inspired embedded X-shaped vibration isolation system

Shihua Zhou et al.

Summary: A bio-inspired embedded X-shaped vibration isolation (BIE-XVI) structure is proposed in this paper to improve the performance of passive vibration isolation system. By considering muscle/tendon contractile functions, joint rotational friction and connecting rod mass, the structure provides better vibration isolation properties. The effects of key parameters on frequency response characteristics and vibration isolation range are thoroughly analyzed, and the structure can achieve quasi-zero-stiffness property for vibration isolation.

NONLINEAR DYNAMICS (2022)

Add to Collection

Article Construction & Building Technology

Assessing vibration isolation performance of single and coupled wave barriers through field experiments

Onur Toygar et al.

Summary: This study assessed the screening effectiveness of single barriers such as open trenches and sheetpiles, as well as the coupled open trench-sheetpile barrier. The results showed that the open trench and the coupled-wave barrier had similar isolation performance and outperformed the sheetpile in most test configurations. In cases where sheetpiles were already installed, the addition of an open trench in front of the sheetpile significantly improved the screening effectiveness.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

A nonlinear quasi-zero-stiffness vibration isolation system with additional X-shaped structure: Theory and experiment

Yuanhao Xiong et al.

Summary: This article proposes a novel nonlinear quasi-zero-stiffness (QZS) vibration isolation system with high load carrying capacity. By connecting an X-shaped structure with a platform, the quasi-zero-stiffness vibration isolation system with additional X-shaped structure (X-QZS) is designed. The relationships of system restoring force and stiffness related to displacement are obtained by static modelling and the influences of the parameters on the system stiffness are analyzed. In the dynamic analysis, the amplitude-frequency characteristics and transmissibility curves are calculated. Numerical simulations and vibration experiments verify the accuracy of the calculation results. The designed X-QZS system exhibits a wide QZS interval, a small unstable interval, a low jump-down frequency, and a high load carrying capacity.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Multidisciplinary

On the displacement transferability of variable stiffness multi-directional low frequency vibration isolation joint

Renzhen Chen et al.

Summary: This paper presents the design and structure of the proposed variable stiffness vibration isolation joint (VSJ), discussing its potential applications in engineering. Experimental results verify the effectiveness of its adjustable stiffness and vibration isolation performance in the vertical direction.

APPLIED MATHEMATICAL MODELLING (2022)

Add to Collection

Article Acoustics

A nonlinear stiffness and nonlinear inertial vibration isolator

Yong Wang et al.

Summary: This article proposes a nonlinear stiffness and nonlinear inertial vibration isolator, which achieves nonlinear stiffness and inertial characteristics through special structures and elements, and examines their effects on dynamic response and isolation performance. The results show that the proposed isolator has better overall isolation performance compared to the other two types of vibration isolators.

JOURNAL OF VIBRATION AND CONTROL (2021)

Add to Collection

Article Mechanics

Performance analysis of a quasi-zero stiffness vibration isolation system with scissor-like structures

Wei Zou et al.

Summary: A novel vibration isolation system with quasi-zero stiffness and nonlinear damping using geometric nonlinearity and scissor-like structures is proposed. This system can isolate low-frequency vibration, suppress high-amplitude vibration, and has minimal impact from increasing nonlinear damping at high frequencies. The theoretical results show that this system outperforms classical counterparts.

ARCHIVE OF APPLIED MECHANICS (2021)

Add to Collection

Article Acoustics

Large amplitude vibrations of imperfect porous-hyperelastic beams via a modified strain energy

Hossein B. Khaniki et al.

Summary: This paper experimentally obtains the porous-hyperelastic properties of soft materials and proposes a general model combining porosity and hyperelasticity. Samples with different porosities are fabricated through adjusting the infill rate of 3D-printing, and a study on beam models shows that functional porosity significantly impacts the nonlinear frequency response of the system.

JOURNAL OF SOUND AND VIBRATION (2021)

Add to Collection

Article Mechanics

Dynamic characteristics of quasi-zero stiffness vibration isolation system for coupled dynamic vibration absorber

Yanqi Liu et al.

Summary: The study focuses on the impact of mass, stiffness, and damping of the vibration absorber on the dynamic response and force transmissibility of the coupled system. Increasing the mass ratio leads to a shift of the amplitude curve of the primary system to the low-frequency range and the appearance of a valley value. Increasing the stiffness ratio of the absorber can reduce the valley amplitude and the second peak amplitude of the primary system.

ARCHIVE OF APPLIED MECHANICS (2021)

Add to Collection

Article Acoustics

Six degree of freedom quasi-zero stiffness magnetic spring with active control: Theoretical analysis of passive versus active stability for vibration isolation

Nur Afifah Kamaruzaman et al.

Summary: This paper compares passive and active stability analyses of a six degree of freedom quasi-zero stiffness magnetic levitation vibration isolation system. The study shows that increasing passive stability has a minimal impact on isolation performance, but control benefits from improved passive stability. The designed control system demonstrates robustness to uncertainties with a large stability margin dominating the closed-loop response.

JOURNAL OF SOUND AND VIBRATION (2021)

Add to Collection

Article Engineering, Mechanical

Design, analysis and semi-active control of a quasi-zero stiffness vibration isolation system with six oblique springs

Guilin Wen et al.

Summary: This study aims to expand the effective displacement range of quasi-zero stiffness systems through a semi-active control strategy. A novel vibration isolation system based on oblique springs and a coil spring is proposed, along with a feedback displacement strategy for stiffness adjustment. Theoretical analysis and virtual prototype simulation results show significant advantages in low-frequency vibration isolation performance for the proposed system.

NONLINEAR DYNAMICS (2021)

Add to Collection

Article Engineering, Mechanical

Design and characteristics of a novel QZS vibration isolation system with origami-inspired corrector

Shiwei Liu et al.

Summary: This paper proposes a new class of quasi-zero-stiffness (QZS) vibration isolation systems inspired by origami metamaterial, achieving high-performance vibration suppression. By studying the mechanical characteristics and negative stiffness mechanism of TMO, a Tachi-Miura origami vibration isolator (TMOriVI) is designed, showing significant potential in the field of low-frequency vibration isolation. Through parametric influence analysis and comparison with existing QZS isolator, the effectiveness and superiority of the proposed isolator are verified.

NONLINEAR DYNAMICS (2021)

Add to Collection

Article Mathematics, Applied

Statics and dynamics of a nonlinear oscillator with quasi-zero stiffness behaviour for large deflections

Gianluca Gatti

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2020)

Add to Collection

Article Engineering, Mechanical

An Adjustable Low-Frequency Vibration Isolation Stewart Platform Based On Electromagnetic Negative Stiffness

Min Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Mechanical

Vibration isolation and damping using a piezoelectric flextensional suspension with a negative capacitance shunt

K. Billon et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Effect of inertia variations for active vibration isolation systems

Jinsoo Choi et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)

Add to Collection

Article Engineering, Geological

Vibration isolation using 3D cellular confinement system: A numerical investigation

K. N. Ujjawal et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)

Add to Collection

Article Mechanics

Low-frequency multi-mode vibration suppression of a metastructure beam with two-stage high-static-low-dynamic stiffness oscillators

Qichen Wu et al.

ACTA MECHANICA (2019)

Add to Collection

Article Engineering, Mechanical

Parameters optimization of vibration isolation and mitigation system for precision platforms using non-dominated sorting genetic algorithm

Zhao-Dong Xu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Acoustics

Investigation on a two-stage platform of large stroke for broadband vertical vibration isolation

Xiling Xie et al.

JOURNAL OF VIBRATION AND CONTROL (2019)

Add to Collection

Article Engineering, Mechanical

Vibration suppression on a platform by using vibration isolation and mitigation devices

Zhao-Dong Xu et al.

NONLINEAR DYNAMICS (2016)

Add to Collection

Article Engineering, Aerospace

Intelligent Vibration Isolation and Mitigation of a Platform by Using MR and VE Devices

Zhao-Dong Xu et al.

JOURNAL OF AEROSPACE ENGINEERING (2016)

Add to Collection

Article Acoustics

Stochastic resonance in a nonlinear mechanical vibration isolation system

Zeqi Lu et al.

JOURNAL OF SOUND AND VIBRATION (2016)

Add to Collection

Article Engineering, Multidisciplinary

Measurement of ground borne vibrations for foundation design and vibration isolation of a high-precision instrument

D. Ulgen et al.

MEASUREMENT (2016)

Add to Collection

Article Acoustics

Identification of backbone curves of nonlinear systems from resonance decay responses

Julian M. Londono et al.

JOURNAL OF SOUND AND VIBRATION (2015)

Add to Collection

Article Engineering, Multidisciplinary

Advanced LIGO two-stage twelve-axis vibration isolation and positioning platform. Part 1: Design and production overview

F. Matichard et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)

Add to Collection

Article Engineering, Multidisciplinary

Advanced LIGO two-stage twelve-axis vibration isolation and positioning platform. Part 2: Experimental investigation and tests results

F. Matichard et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)

Add to Collection

Article Engineering, Mechanical

Active structural acoustic control of an elastic cylindrical shell coupled to a two-stage vibration isolation system

Xianglong Ma et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)

Add to Collection

Article Acoustics

An investigation of a two-stage nonlinear vibration isolation system

Zeqi Lu et al.

JOURNAL OF SOUND AND VIBRATION (2013)

Add to Collection

Article Engineering, Mechanical

Optimization analysis on parameters of multi-dimensional earthquake isolation and mitigation device based on genetic algorithm

Zhao-Dong Xu et al.

NONLINEAR DYNAMICS (2013)

Add to Collection

Article Acoustics

A multi-stage high-speed railroad vibration isolation system with negative stiffness

C-M Lee et al.

JOURNAL OF SOUND AND VIBRATION (2012)

Add to Collection

Article Acoustics

Theoretical design parameters for a quasi-zero stiffness magnetic spring for vibration isolation

Will S. Robertson et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Add to Collection

Review Acoustics

Recent advances in nonlinear passive vibration isolators

R. A. Ibrahim

JOURNAL OF SOUND AND VIBRATION (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.