☆ 4.6 Article

Development of Iron-Silicate Composites by Waste Glass and Iron or Steel Powders

MOLECULES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Production of Hybrid Nanocomposites Based on Iron Waste Reinforced with Niobium Carbide/Granite Nanoparticles with Outstanding Strength and Wear Resistance for Use in Industrial Applications

Shams A. M. Issa et al.

Summary: The main objective of this work is to recycle unwanted industrial waste to produce innovative nanocomposites with improved mechanical, tribological, and thermal properties. Using powder metallurgy technique, iron/copper/niobium carbide/granite nanocomposites were fabricated. The addition of NbC and granite nanoparticles significantly improved the mechanical properties of the nanocomposites.

NANOMATERIALS (2023)

Add to Collection

Article Materials Science, Ceramics

Influences of Mn2+ ions, and Mn2+-Yb3+ dimer on the optical band gaps and bandwidth flatness of near-infrared emissions of Ho3+/Tm3+, Ho3+/Tm3+/Yb3+ co-doped calcium aluminosilicate glasses

Ho Kim Dan et al.

Summary: We investigated the influences of Mn2+-Yb3+ dimer on the optical band gaps and bandwidth uniformity of Ho3+/Tm3+ and Ho3+/Tm3+/Yb3+ co-doped calcium aluminosilicate glasses. Differential thermal analysis and energy dispersive X-ray spectroscopy were used to determine temperature values for heat treatment and elemental composition. NIR emission spectra of Ho3+/Tm3+/Yb3+ co-doped CAS glasses with a bandwidth of approximately 450 nm were identified using a 980 nm laser diode as the excitation resource. The influences of Mn2+ ions and Mn2+-Yb3+ dimer on the optical band gaps and bandwidth uniformity of NIR emission were investigated, and the optimal Mn2+:Yb3+ concentration ratio for the best bandwidth uniformity of Ho3+/Tm3+/Yb3+ co-doped CAS glasses was determined.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2023)

Add to Collection

Article Materials Science, Ceramics

Preparation and characterization of binary Mg-silicate glasses via Sol-Gel route

Chuqing Jiang et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2023)

Add to Collection

Review Environmental Sciences

Nanomaterials as catalysts for CO2 transformation into value-added products: A review

Yakubu Adekunle Alli et al.

Summary: Carbon dioxide is the most important greenhouse gas, accounting for 76% of all emissions. The concentration of atmospheric CO2 has increased significantly and is projected to continue rising. In addition to reducing emissions, capturing and transforming CO2 into valuable materials, such as fuels, using engineered nanomaterials shows promise.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

Add to Collection

Article Chemistry, Physical

Nanocomposites as Substituent of Cement: Structure and Mechanical Properties

Roxana Rada et al.

Summary: Until now, the focus of scientific research on recycling construction and demolition waste has been on the production of concrete, cements, and bricks. Existing methods involve the addition of binders, compaction, and possibly heat treatment, but lack a specific concrete recycling method. This study aims to develop new cement materials using 2.5% composite derived from construction and demolition waste powder for substitution in the construction industry. Characterization of the materials was done using X-ray diffraction (XRD), infrared (IR), and nuclear magnetic resonance (NMR) spectroscopy, revealing varied crystalline phases and reservoirs of water in the composite construction material. Micro-Vickers hardness measurements were taken to assess the local mechanical properties of the composite-cement mixture.

MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Effect of the use of waste glass (as precursor, and alkali activator) in the manufacture of geopolymer rendering mortars and architectural tiles

Laura M. Henao Rios et al.

Summary: The environmental impact of CDW, which accounts for nearly half of the solid wastes sent to landfills, is significant. Glass wastes, although 100% recyclable, have a low recycling rate in the United States compared to Europe. This research evaluates the use of waste glass in geopolymers and finds that the strength of the resulting materials depends on the type of activator and the percentage of glass used.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Review Polymer Science

The State of the Art of Natural Polymer Functionalized Fe3O4 Magnetic Nanoparticle Composites for Drug Delivery Applications: A Review

Abu Hassan Nordin et al.

Summary: Natural polymers have gained significant attention for their potential role in the encapsulation and transportation of pharmaceuticals. This review focuses on drug delivery systems (DDS) constructed using representative natural polymers from animals, plants, and microbes. To enhance the efficiency of polymers in DDS, the incorporation of Fe3O4 magnetic nanoparticles has been widely explored due to their unique characteristics. This review provides an overview of recent progress in using natural polymeric Fe3O4 magnetic nanoparticles for drug delivery applications based on different polymer origins.

GELS (2023)

Add to Collection

Article

Recent trends of spinel ferrites (MFe2O4: Mn, Co, Ni, Cu, Zn) applications as an environmentally friendly catalyst in multicomponent reactions: A review

Agus Rimus Liandi et al.

Case Studies in Chemical and Environmental Engineering (2023)

Add to Collection

Article Materials Science, Multidisciplinary

A few common misconceptions in the interpretation of experimental spectroscopic data

M. G. Brik et al.

Summary: Proper presentation and interpretation of experimental spectroscopic data is crucial for understanding luminescence in solids. Errors in interpreting spectroscopic data, such as estimating band gaps, locating defect levels, decomposing spectral bands, and comparing FWHM, are prevalent in scientific reports. Citing these issues can help researchers avoid these common mistakes in data interpretation.

OPTICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of MgFe2O4 nanoparticles and PEG-coated MgFe2O4 nanocomposite

Diego H. de Hoyos-Sifuentes et al.

Summary: The present study synthesized MgFe2O4 nanoparticles with different molar ratios of Mg/Fe by sol-gel and coated them with polyethylene glycol (PEG) using the agitation method. The synthesized nanoparticles and nanocomposites were characterized using various techniques, including XRD, TGA, DTA, SEM-EDX, TEM, VSM, and FTIR. The results showed the structural and morphological properties of the nanoparticles and demonstrated their potential for biomedical applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Multidisciplinary

From Low to High Saturation Magnetization in Magnetite Nanoparticles: The Crucial Role of the Molar Ratios Between the Chemicals

Yaser Hadadian et al.

Summary: This study presents a comprehensive characterization of iron oxide nanoparticles synthesized using a thermal decomposition method. It found that varying the molar ratios of the starting materials can result in monodisperse nanoparticles with high saturation magnetization. The reduced magnetization in some samples was attributed to distortion and microstrain in the particles. Additionally, particles with lower surface coating and higher polydispersity exhibited lower saturation magnetization. The study concludes that the choice of molar ratios and heating profile is crucial for obtaining high-quality iron oxide nanoparticles.

ACS OMEGA (2022)

Add to Collection

Article Chemistry, Physical

Fe-6.5 wt%Si soft magnetic composites with significant improvement of magnetic properties by compositing nano-MnZn ferrites

Tiansheng Yang et al.

Summary: A novel soft magnetic composites (SMCs) composed of Fe-6.5 wt%Si/nano-MnZn ferrites was prepared. The addition of nano-MnZn ferrites increased the effective permeability and reduced the hysteresis losses of the SMCs. SMCs with 2 wt% nano-MnZn ferrites annealed at 400°C exhibited the optimal comprehensive performances.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Review Crystallography

An Overview of Iron Oxide (Fe3O4) Nanoparticles: From Synthetic Strategies, Characterization to Antibacterial and Anticancer Applications

Muhammad Rukhsar et al.

Summary: Magnetic nanoparticles have promising applications in cancer detection, antibacterial properties, and drug delivery. This review provides an overview of their various applications and current breakthroughs, as well as a brief discussion on related issues.

CRYSTALS (2022)

Add to Collection

Article Electrochemistry

Fabrication of Fe3O4 nanoparticles by using cathode glow discharge electrolysis plasma and its electrochemical properties

Jie Yu et al.

Summary: In this study, Fe3O4 nanoparticles were successfully fabricated by one-step method using cathode glow discharge electrolysis plasma technique. The electrochemical performance of the Fe3O4 nanoparticles as electrode material for supercapacitors was investigated and showed promising results.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Review Green & Sustainable Science & Technology

A Review on Recycling and Reutilization of Blast Furnace Dust as a Secondary Resource

Xiong Xiao et al.

Summary: A large amount of dust is formed during blast furnace ironmaking, containing valuable metals. The complex composition and fine particle size make it difficult to recycle. Environment-friendly technologies for precious metal recovery are highly valued.

JOURNAL OF SUSTAINABLE METALLURGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improved LPG sensing properties of nickel doped cobalt ferrites derived from metallurgical wastes

Kamatchi Jothiramalingam Sankaran et al.

Summary: This study demonstrates an improved gas sensing response of nickel doped cobalt ferrite nanoparticles synthesized from metallurgical wastes, showing superior sensing behavior compared to undoped nanoparticles. The morphology and magnetic properties of the nanoparticles directly correlate with their superior sensing behavior, indicating a potential for developing efficient gas sensors from waste materials.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Characterizations on phase reconstruction, microstructure evolution and separation of magnetic ferrite ceramics from low-grade manganese ores by novel uphill reaction diffusion and magnetic separation

Bingbing Liu et al.

Summary: A novel process was developed to recover manganese and iron synchronously from ferruginous manganese ore as ferrite ceramics. Various methods were used to analyze the phase reconstruction, reaction diffusion, ferrite size quantification, and separation behavior, leading to the successful recovery of a soft magnetic manganese ferrite precursor with high yields.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Construction & Building Technology

Iron incorporation in synthetic precipitated calcium silicate hydrates

Jirawan Siramanont et al.

Summary: The effect of Fe3+ on the precipitation of synthetic calcium silicate hydrates (C-S-H) under controlled conditions has been evaluated. The presence of initial ferrihydrite restricts the incorporation of iron into C-S-H, with a non-uniform distribution of Fe3+ when initial ferrihydrite is present.

CEMENT AND CONCRETE RESEARCH (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Microwave absorbing properties of ferrites and their composites: A review

Anas Houbi et al.

Summary: This article mainly introduces the ferrite components in high-performance microwave absorbing composites, focusing on their absorption characteristics, preparation methods, and microwave absorption mechanisms.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Ferrite application as an electrochemical sensor: A review

Rohit Ranga et al.

Summary: Nano-ferrites are extensively researched sensing materials for detecting toxic gases and monitoring environmental pollution, with improved gas sensing performance achieved through various doping and composite materials.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Physics, Condensed Matter

Enhanced magnetic and photocatalytic characteristics of cerium substituted spinel MgFe2O4 ferrite nanoparticles

K. Geetha et al.

Summary: Spinel MgCexFe2-xO4 nanoparticles were synthesized using microwave combustion technique with Aloe vera extract as the reducing agent. The substitution of Ce3+ had a significant impact on the physico-chemical and photocatalytic properties. Among the compositions tested, sample x = 0.3 exhibited the highest photocatalytic degradation efficiency.

PHYSICA B-CONDENSED MATTER (2021)

Add to Collection

Article Acoustics

Boosted sono-oxidative catalytic degradation of Brilliant green dye by magnetic MgFe2O4 catalyst: Degradation mechanism, assessment of bio-toxicity and cost analysis

Saptarshi Bose et al.

Summary: Magnetic MgFe2O4 nanoparticles were synthesized and used as catalyst for the degradation of Brilliant Green dye. The optimum conditions for highest degradation efficiency were determined to be MgFe2O4 catalyst dose of 1.0 g/L, PS dose of 300 mg/L, and initial dye concentration of 70 ppm under 15 min of ultrasound irradiation.

ULTRASONICS SONOCHEMISTRY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances in Synthesis and Applications of MFe2O4 (M = Co, Cu, Mn, Ni, Zn) Nanoparticles

Thomas Dippong et al.

Summary: Research on the synthesis and characterization of nanosized ferrites has increased significantly over the past decade, leading to the identification of various new applications for these materials. Different synthesis methods and applications, as well as the properties and advantages of MFe2O4 (M = Co, Cu, Mn, Ni, Zn) nanoparticles, have been reviewed in the paper. Nanosized ferrites possess good magnetic, electrical, mechanical, and chemical properties, making them suitable for a wide range of potential applications in various fields.

NANOMATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Immobilized polymeric sulfonated ionic liquid on core-shell structured Fe3O4/SiO2 composites: A magnetically recyclable catalyst for simultaneous transesterification and esterifications of low-cost oils to biodiesel

Wenlei Xie et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Construction & Building Technology

Mechanical properties cement based composites modified with nano-Fe3O4/SiO2

Elzbieta Horszczaruk et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Impact of Gadolinium on the Structure and Magnetic Properties of Nanocrystalline Powders of Iron Oxides Produced by the Extraction-Pyrolytic Method

Vera Serga et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Speciation of sulphate ions in sodium alumino(iron)phosphate glasses

S. V. Stefanovsky et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Transition metal doped cobalt ferrite nanoparticles: Efficient photocatalyst for photodegradation of textile dye

Sneha Singh et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Electrochemistry

Structural and electrochemical properties of recycled active electrodes from spent lead acid battery and modified with different manganese dioxide contents

S. Rada et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Engineering, Chemical

Novel use of waste glass powder: Production of geopolymeric tiles

Jhonathan F. Rivera et al.

ADVANCED POWDER TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Ceramics

Nickel-lead-borate glasses and vitroceramics with antiferromagnetic NiO and nickel-orthoborate crystalline phases

S. Mitrici et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)

Add to Collection

Article Materials Science, Ceramics

Acetylene adsorption on the iron-lead-borate glassy and vitroceramic surface

S. Mitrici et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Photocatalytic study for fabricated Ag doped and undoped MgFe2O4 nanoparticles

Krushitha Shetty et al.

MATERIALS TODAY-PROCEEDINGS (2017)

Add to Collection

Article Chemistry, Physical

An FTIR and ESR study of iron doped calcium borophosphate glass-ceramics

M. Karabulut et al.

JOURNAL OF MOLECULAR STRUCTURE (2015)

Add to Collection

Article Engineering, Environmental

Significantly enhanced photocatalytic performance of CdS coupled nanosheets and the mechanism study

Xinlin Liu et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Materials Science, Ceramics

Structural and optical properties of the lead based glasses containing iron (III) oxide

L. Rus et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A comparative study of structural, electrical and magnetic properties of magnesium ferrite nanoparticles synthesised by sol-gel and co-precipitation techniques

Smitha Thankachan et al.

JOURNAL OF EXPERIMENTAL NANOSCIENCE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Electron spin resonance and magnetization studies of ZnO-TeO2-Fe2O3 glasses

P. Sandhya Rani et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2013)

Add to Collection

Article Chemistry, Applied

Identification of iron species in FeSiBEA by DR UV-vis, XPS and Mossbauer spectroscopy: Influence of Fe content

Jacek Gurgul et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Add to Collection

Article Spectroscopy

Effect of aluminum oxide codoping on copper-lead-germanate glasses

M. Rada et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis, structural and magnetic properties of different metal ion substituted nanocrystalline zinc ferrite

R. P. Patil et al.

RESULTS IN PHYSICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Properties of inorganic polymer (geopolymer) mortars made of glass cullet

M. Cyr et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection

Proceedings Paper Environmental Sciences

An overview of utilization of steel slag

Huang Yi et al.

SEVENTH INTERNATIONAL CONFERENCE ON WASTE MANAGEMENT AND TECHNOLOGY (ICWMT 7) (2012)

Add to Collection

Article Chemistry, Physical

Synthesis, structural and electrical characterization of Sb3+ substituted spinel nickel ferrite (NiSbxFe2-xO4) nanoparticles by reverse micelle technique

Muhamamd Naeem Ashiq et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Materials Science, Ceramics

Structural analysis on spinel (MgAl2O4) for application in spinel-bonded castables

A. Banerjee et al.

CERAMICS INTERNATIONAL (2009)

Add to Collection

Article Materials Science, Multidisciplinary

EPR and magnetic properties of MgO-CaO-SiO2-P2O5-CaF2-Fe2O3 glass-ceramics

Rajendra Kumar Singh et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2009)

Add to Collection

Review Engineering, Environmental

A review on the use of waste glasses in the production of cement and concrete

Caijun Shi et al.

RESOURCES CONSERVATION AND RECYCLING (2007)

Add to Collection

Article Materials Science, Ceramics

Production of coloured zircon pigments from zircon

E. Ozel et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.