☆ 4.6 Review

Photocatalytic CO2 Conversion into Solar Fuels Using Carbon-Based Materials-A Review

MOLECULES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

0D/2D/3D ternary Au/Ti3C2/TiO2 photocatalyst based on accelerating charge transfer and enhanced stability for efficiently hydrogen production

Yan Wang et al.

Summary: The study developed a composite photocatalyst consisting of 2D layered Ti3C2, thiolate-protected Au clusters, and TiO2 nanoparticles. The introduced Ti3C2 served as an intermedium for electron transfer and significantly improved the charge transfer efficiency. The resulting Au/Ti3C2/TiO2 photocatalyst exhibited excellent performance for H-2 production, with a rate 13.7 times higher than Au/TiO2. The strong interaction between Ti3C2 and Au/TiO2 also contributed to the high stability and durability of the composite material.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Hierarchical hollow-microsphere cadmium sulfide-carbon dots composites with enhancing charge transfer efficiency for photocatalytic CO2 reduction

Changhai Liu et al.

Summary: A novel carbon dots modified CdS hollow sphere (CDs/CdS) has been successfully synthesized, exhibiting significantly improved solar-driven CO2 reduction performance. The formed hollow sphere and seamless contact contribute to the excellent performance and stability, while CDs as cocatalyst boost the charge separation and stabilize the electrons. This study provides a feasible perspective for designing and fabricating high-efficient catalysts for CO2 photoreduction.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Chemistry, Physical

C60-Stabilized Cu+ Sites Boost Electrocatalytic Reduction of CO2 to C2+ Products

Bohang Zhao et al.

Summary: Constructing Cu-0-Cu+ double-active sites is important for C-C coupling in CO2 electrocatalytic reduction, but stabilizing Cu+ is challenging. In this study, fullerene (C-60) is used to stabilize Cu+ and a composite of copper oxide and C-60 precursor is designed to obtain a catalyst with Cu-0-Cu+ double-active sites. The catalyst shows high multicarbon product selectivity and good stability.

ADVANCED ENERGY MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Integrating carbon vacancy modified carbon quantum dots with carbon nitride for efficient photocatalytic CO2 reduction to syngas with tunable hydrogen to carbon monoxide ratio

Caixia Feng et al.

Summary: Converting CO2 to value-added syngas is challenging but important for relieving environmental problems and energy crisis. In this study, carbon vacancy modified carbon quantum dots were integrated with g-C3N4 to form VCQDs/C3N4 heterojunctions, which showed superior CO2 photoreduction performance under visible light irradiation. The interaction between g-C3N4 and VCQDs and the carbon vacancy in VCQDs facilitated the migration of photo-generated electrons and broadened the absorbance range of heterojunctions. Additionally, the H2:CO ratio of produced syngas could be tuned by adjusting the VCQD dosage in VCQDs/C3N4, which is significant for industrial application and reducing the greenhouse effect brought by CO2.

CARBON (2023)

Add to Collection

Article Chemistry, Physical

Bandgap engineered g-C3N4 and its graphene composites for stable photoreduction of CO2 to methanol

Ramesh Chandra Sahoo et al.

Summary: A copolymerization strategy was employed to synthesize g-C3N4 with a narrow bandgap, and composites of g-C3N4 and reduced graphene oxide (rGO) were prepared as catalysts. These composite catalysts exhibited selective photoreduction of CO2 to methanol, along with good stability under scavenger-free conditions.

CARBON (2022)

Add to Collection

Article Engineering, Environmental

Molybdenum phosphide coupled with highly dispersed nickel confined in porous carbon nanofibers for enhanced photocatalytic CO2 reduction

Shuaiqi Gong et al.

Summary: Photocatalytic CO2 reduction using renewable solar energy is a promising strategy for managing global carbon balance. However, the process of oriented photogenerated electron delivery is challenging. In this study, we developed a method to construct porous nitrogen-doped carbon nano-fibers loaded with highly dispersed nickel and molybdenum phosphide nanoparticles for efficient CO2 reduction. The porous carbon nanofibers improved charge/mass transfer and CO2 adsorption, while the highly dispersed nickel species stabilized by coordinating Ni-N bonds with N from the carbon nanofibers adjusted the material's band structure and altered the transfer route of the photogenerated carriers. The resulting Ni-MoP@NCPF exhibited high CO product selectivity and rate under visible light irradiation, outperforming the Ni-free MoP@NCPF. These findings provide new insights into cost-effective transition metal compounds for photocatalytic CO2 reduction through morphology, composition, and heterointerface engineering.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Rare earth metal doped nickel catalysts supported on exfoliated graphitic carbon nitride for highly selective CO and CO2 methanation

Khairul Naim Ahmad et al.

Summary: In this study, nickel catalysts supported on exfoliated graphitic carbon nitride with cerium (Ni-Ce/eg-C3N4) and lanthanum (Ni-La/eg-C3N4) as promoters showed improved catalytic performance in CO and CO2 methanation compared to un-promoted Ni/eg-C3N4 catalyst, attributed to increased mesopores, better dispersion of Ni nanoparticles, moderate metal-support interaction, and enhanced surface basic sites. The Ce promoter and eg-C3N4 support increased the capacity of CO2 adsorption and activation sites, resulting in high catalytic activity for CO2 methanation at low temperatures.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

CO2 Reduction Using Water as an Electron Donor over Heterogeneous Photocatalysts Aiming at Artificial Photosynthesis

Shunya Yoshino et al.

Summary: Photocatalytic and photoelectrochemical CO2 reduction is a promising chemical process for solving resource, energy, and environmental problems. It converts solar energy into chemical products using water as electron and proton sources. Photocatalytic CO2 reduction employing powdered materials is a low-cost and scalable system. The use of water as an electron donor is key for achieving artificial photosynthetic CO2 reduction.

ACCOUNTS OF CHEMICAL RESEARCH (2022)

Add to Collection

Article Engineering, Environmental

Direct Z-scheme FeV2O4/g-C3N4 binary catalyst for highly selective reduction of carbon dioxide

Xin Zhao et al.

Summary: In this study, a Z-scheme catalyst was designed and prepared by encapsulating spinel oxides, which significantly reduced the recombination probability of photoexcited carriers and provided adsorptive and reactive sites for CO2 molecules, demonstrating good photocatalytic activity and selectivity.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Graphene aerogel-based NiAl-LDH/g-C3N4 with ultratight sheet-sheet heterojunction for excellent visible-light photocatalytic activity of CO2 reduction

Min Yang et al.

Summary: This article investigates the ultratight heterojunctions formed by NiAl-LDH/g-C3N4 nanosheets, which exhibit remarkable CO production rate under visible light irradiation, surpassing the conventional CO2 photocatalytic reduction efficiency. The unique structure promotes the transport and separation of carriers, providing new insights for designing photocatalysts with ideal CO2 reduction performance.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Engineering, Environmental

Hollow spherical biomass derived-carbon dotted with SnS2/g-C3N4 Z-scheme heterojunction for efficient CO2 photoreduction into CO

Yang Li et al.

Summary: A hollow spherical Z-scheme SnS2/g-C3N4/C photocatalyst is successfully constructed, which shows high CO2 adsorption capacity and high charge separation efficiency for enhancing photocatalytic activity. Biomass mabospores are utilized as precursors and carbon sources, and g-C3N4 and SnS2 nanosheets are tightly anchored on the surface of mabospore-derived carbon spheres. The optimized hollow spherical Z-scheme heterojunction provides preferable basic sites for CO2 adsorption, promotes electron-hole pair separation, and increases reduction capability of electrons in the conduction band of g-C3N4. Theoretical calculations confirm the efficient conversion of CO2 to CO by the SCC Z-scheme heterostructure. This work offers a new strategy for constructing efficient photocatalysts for CO2 conversion into chemical fuels.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Nanoarchitectonics of MXene/semiconductor heterojunctions toward artificial photosynthesis via photocatalytic CO2 reduction

Xinjuan Liu et al.

Summary: This study explores the role and potential applications of two-dimensional transition metal carbides (MXenes) in photocatalytic CO2 reduction. It identifies MXenes as co-catalysts that can enhance the efficiency and activity of the reaction. The article provides a detailed discussion on MXenes' electronic structure, CO2 adsorption and activation ability, as well as the photocatalytic CO2 reduction pathways on MXene heterojunction photocatalysts. Suggestions for preparing MXene-based heterojunction photocatalysts are also provided.

COORDINATION CHEMISTRY REVIEWS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Constructing S-scheme 2D/0D g-C3N4/TiO2 NPs/MPs heterojunction with 2D-Ti3AlC2 MAX cocatalyst for photocatalytic CO2 reduction to CO/CH4 in fixed-bed and monolith photoreactors

Muhammad Tahir et al.

Summary: In this study, an exfoliated 2D MAX Ti3AlC2 conductive cocatalyst anchored with g-C3N4/TiO2 was investigated for CO2 photoreduction. The results showed that the combination of TiO2 NPs and the 2D Ti3AlC2 MAX structure achieved higher CH4 production. The composite material operated under a step-scheme photocatalytic mechanism, suppressing the recombination of useful electron and holes and providing a higher reduction potential for efficient CO2 conversion. The performance of the composite catalyst was further studied in a fixed-bed and monolith photoreactor, demonstrating increased CO production with monolithic support but reduced CH4 production.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Preparation, suppressed the charge carriers recombination, and improved photocatalytic performance of g-C3N4/MoS2 p-n heterojunction photocatalyst for tetracycline and dyes degradation upon visible light

Yan Cao et al.

Summary: This study aims to enhance the photocatalytic performance of g-C3N4 by constructing a p-n heterojunction with MoS2 semiconductor. The physicochemical properties and catalytic activity improvement were evaluated through various characterizations and tests. The g-C3N4/MoS2 nanocomposite showed higher degradation efficiency of dye contaminants under visible light due to its planar structure, improved visible spectrum absorption, high specific surface area, and p-n heterojunction construction.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Photocatalytic reduction of CO2 to methanol using Zr(IV)-based MOF composite with g-C3N4 quantum dots under visible light irradiation

Karanika Sonowal et al.

Summary: This study presents a method for selectively photoreducing CO2 to methanol using a composite of graphene-like carbon nitride quantum dots and zirconium-based MOFs under visible light irradiation. The graphene-like carbon nitride quantum dots act as co-catalysts, improving the electronic conductance properties of the composite and elongating the lifetime of photogenerated charge carriers, thus accelerating the generation of catalytically active sites and achieving better selectivity and efficiency in methanol formation.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Zinc porphyrin and rhenium complex-based donor-acceptor conjugated porous polymer for visible-light-driven conversion of CO2 to CO

Jun Jiang et al.

Summary: This study reports a donor-acceptor type conjugated porous polymer (ZnPor@Re) as an ideal platform for visible-light-driven photocatalytic conversion of CO2 into CO, showing excellent photocatalytic activity.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Photocatalytic Reduction of CO2 with N-Doped TiO2-Based Photocatalysts Obtained in One-Pot Supercritical Synthesis

Oscar R. Andrade et al.

Summary: The effect of carbon support on the activity and selectivity of N-doped TiO2 nanoparticles was analyzed in this study. The results showed that the photocatalytic performance of the prepared catalysts was enhanced due to the synergistic effect of N doping and carbon support.

NANOMATERIALS (2022)

Add to Collection

Review Chemistry, Physical

Rational Design of Metal Halide Perovskite Nanocrystals for Photocatalytic CO2 Reduction: Recent Advances, Challenges, and Prospects

Jin Wang et al.

Summary: This review focuses on the application of metal halide perovskite nanocrystals (MHP NCs) in the field of photocatalysis. It highlights the key issues in developing MHP photocatalysts, such as severe charge recombination and low stability, and provides design principles and modification strategies to address these issues. An outlook on future challenges and prospects is also presented.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Synthesis of g-C3N4/NiO-carbon microsphere composites for Co-reduction of CO2 by photocatalytic hydrogen production from water decomposition

Meng Sun et al.

Summary: In this paper, a g-C3N4/NiO/corn straw derivative carbon microsphere composite photocatalyst was successfully prepared and showed enhanced performance in H-2 production and CO2 reduction. The heterostructure between g-C(3)N(4) and NiO, along with the conductivity of carbon microsphere, played a synergistic role in the photocatalysis process. The study provides new strategies for the synergistic reduction of CO2 by photocatalytic technology for H-2 production.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Environmental

Integration of 3D macroscopic reduced graphene oxide aerogel with DUT-67 for selective CO2 photoreduction to CO in Gas-Solid reaction

Xiaoxue Zhao et al.

Summary: DUT-67/RGO aerogel photocatalysts with 3D macroscopic morphology were prepared by a hydrothermal and freeze-drying process. The aerogels exhibited strong adsorption/activation capacity for CO2 molecules, and the addition of RGO improved light energy utilization. The high selectivity and rate of CO2 reduction to CO were achieved at the gas-solid interface.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Defect engineering in polymeric carbon nitride with accordion structure for efficient photocatalytic CO2 reduction and H2 production

Jianhua Hou et al.

Summary: In this study, N-vacancy defect containing and C-doped graphitic carbon-nitride nanosheets were synthesized for the first time, with a precisely tunable band-gap energy to enhance visible light absorption. The optimized catalyst showed impressive hydrogen evolution rate and CO production rate. Theoretical calculations demonstrated the importance of defect engineering in achieving highly efficient and multi-functional photocatalysis.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Reduced graphene oxide assisted g-C3N4/rGO/NiAl-LDHs type II heterostructure with high performance photocatalytic CO2 reduction

Desen Zhou et al.

Summary: Layered g-C3N4/rGO/NiAl-LDHs heterojunctions were prepared by hydrothermal method, leading to enhanced photocatalytic CO2 reduction activity through changes in electronic transmission and interfacial electric field.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Synthesis and overview of carbon-based materials for high performance energy storage application: A review

Karamveer Sheoran et al.

Summary: The increasing demand for energy and the limited supply of fossil fuels have led researchers to focus on advanced materials, particularly carbon-based materials such as graphene, activated carbon, and carbon nanotubes, due to their significant electrical, thermal, and mechanical properties. Carbon nanotubes and graphene are widely used in energy storage applications. However, carbon materials as anode materials have limitations in terms of their electrochemical activity.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Carbonaceous materials as adsorbents for CO2 capture: synthesis and modification

Xingyuan Gao et al.

Summary: This review comprehensively discusses the application of various carbon-based materials as CO2 adsorbents, including the carbonization, activation, and modification processes, and elucidates the synthesis-structure-performance relationships in depth.

CARBON CAPTURE SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Applied

Copper and platinum dual-single-atoms supported on crystalline graphitic carbon nitride for enhanced photocatalytic CO2 reduction

Lei Cheng et al.

Summary: In this study, a novel Pt-Cu single-atom catalyst was developed to reduce noble metal loading and improve photocatalytic activity. By combining Pt with Cu atoms, the catalyst exhibited high selectivity and activity for CO2 reduction. The use of N-vacancy-rich crystalline carbon nitride as a ligand enabled the dispersion of Pt-Cu atoms, resulting in high mass activity with low Pt loading. The findings provide insights for the design of efficient noble metal-based photocatalysts.

CHINESE JOURNAL OF CATALYSIS (2022)

Add to Collection

Article Engineering, Environmental

Photocatalytic conversion of CO2 into valuable products using emerging two-dimensional graphene-based nanomaterials: A step towards sustainability

Maansi Aggarwal et al.

Summary: In the past decade, anthropogenic CO2 emissions have become a major focus in the environmental issues. Graphene has been widely explored as a catalyst for solar fuel generation, but its shortcomings, such as faster recombination rates and photo-corrosion, have slightly hindered its growth. Research also delves into the role of graphene and its various modifications in CO2 conversion.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Physical

Engineering 2D Photocatalysts toward Carbon Dioxide Reduction

Yansong Zhou et al.

Summary: Photocatalytic technology is an attractive strategy for driving chemical reactions using renewable solar energy to address energy and environmental concerns. Recent research has focused on 2D nanomaterials in photocatalytic CO2 reduction due to their unique structural properties. Ongoing development of modification strategies for 2D nanomaterials can enhance light absorption, promote charge carrier separation, and improve CO2 activation, thus boosting photocatalytic efficiency.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Porous Organic Polymers for Photocatalytic Carbon Dioxide Reduction

Yuan-Zhe Cheng et al.

Summary: Many porous organic polymers (POPs) with conjugated skeletons and large specific surface areas have been used as heterogeneous catalysts in the photocatalytic CO2 reduction reaction. Different catalytic systems have been developed, each with its own advantages and drawbacks, such as higher efficiency but lower durability in metal-loaded systems. The reduction of co-catalysts in POPs aims to achieve a more environmentally friendly CO2 photoreduction reaction.

CHEMPHOTOCHEM (2021)

Add to Collection

Article Energy & Fuels

Boron-doped nitrogen-deficient carbon nitride-based Z-scheme heterostructures for photocatalytic overall water splitting

Daming Zhao et al.

Summary: Researchers have successfully used doped carbon nitride-based Z-scheme heterostructures to split water and produce hydrogen, but coupling suitable H-2 and O-2 evolution components remains challenging.

NATURE ENERGY (2021)

Add to Collection

Article Engineering, Environmental

Fullerene modified CsPbBr3 perovskite nanocrystals for efficient charge separation and photocatalytic CO2 reduction

Zhijie Zhang et al.

Summary: The study demonstrates the design and fabrication of a C60/CsPbBr3 composite as an efficient and stable photocatalyst for visible-light-driven CO2 reduction, achieving significantly improved CO2 photoreduction activity. This work provides an effective strategy for constructing halide perovskite-based composite systems with enhanced photocatalytic performance, with potential applications in artificial photosynthesis.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Encapsulation of Pd Nanoparticles in Covalent Triazine Frameworks for Enhanced Photocatalytic CO2 Conversion

Shien Guo et al.

Summary: In this study, ultrafine Pd nanoparticles immobilized in an imine-linked covalent triazine framework (Pd@Imine-CTF) were successfully prepared using a wet-chemistry approach. The resulting Pd@Imine-CTF exhibited a highly porous structure, exposing more active sites for CO2 adsorption and diffusion, leading to excellent photocatalytic performance towards CO2 reduction with high selectivity. Under visible-light irradiation, Pd@Imine-CTF showed evolution rates of CO and CH4 and a remarkable selectivity of up to 91.8%.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Mass production of a single-atom cobalt photocatalyst for high-performance visible-light photocatalytic CO2 reduction

Pianpian Zhang et al.

Summary: The study introduces a high-efficiency, low-cost, and easy-to-operate photocatalyst Co-SA@SP-800, which effectively enhances the photocatalytic CO2 reduction reaction. Large scale production of the catalyst can be achieved through a simple and practical method, exhibiting remarkable photoactivity and CO selectivity.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Engineering, Environmental

Photocatalytic CO2 reduction over g-C3N4 based heterostructures: Recent progress and prospects

Utpal Ghosh et al.

Summary: The potential of graphitic carbon nitride in the photocatalytic reduction of CO2 has been extensively explored, with heterostructure fabrication being the most efficient method for improving charge carrier separation efficiency. This review summarizes recent progress and design considerations of graphitic carbon nitride based heterostructures for CO2 reduction, highlighting the unique characteristics and potential applications in enhancing CO2 adsorption and activation efficacy.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Polymer Science

Fullerene polymer film as a highly efficient photocatalyst for selective solar fuel production from CO2

Dolly Yadav et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Photoactivated Graphene Oxide to Enhance Photocatalytic Reduction of CO2

Yu Kuang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Ceramics

Nanocrystalline transition metal oxides and their composites with reduced graphene oxide and carbon nanotubes for photocatalytic applications

Rukia Fatima et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Rational Design of Carbon-Based 2D Nanostructures for Enhanced Photocatalytic CO2Reduction: A Dimensionality Perspective

Wee-Jun Ong et al.

CHEMISTRY-A EUROPEAN JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

CO2 photocatalytic reduction with CNT/TiO2 based nanocomposites prepared by high-pressure technology

Veronica Rodriguez et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2020)

Add to Collection

Review Chemistry, Physical

Carbon-based photocatalysts for enhanced photocatalytic reduction of CO2 to solar fuels

Mufeedah Muringa Kandy

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical Reduction of CO2 by SnOx Nanosheets Anchored on Multiwalled Carbon Nanotubes with Tunable Functional Groups

Qi Zhang et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Chemistry, Physical

Cu-NPs embedded 1D/2D CNTs/pCN heterojunction composite towards enhanced and continuous photocatalytic CO2 reduction to fuels

Muhammad Tahir et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Applied

Development of graphene based photocatalysts for CO2 reduction to C1 chemicals: A brief overview

Shahzad Ali et al.

CATALYSIS TODAY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advancements in engineering approach towards design of photo-reactors for selective photocatalytic CO2 reduction to renewable fuels

Azmat Ali Khan et al.

JOURNAL OF CO2 UTILIZATION (2019)

Add to Collection

Review Chemistry, Multidisciplinary

High-index faceted metal oxide micro-/nanostructures: a review on their characterization, synthesis and applications

Shaodong Sun et al.

NANOSCALE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Systematic Bandgap Engineering of Graphene Quantum Dots and Applications for Photocatalytic Water Splitting and CO2 Reduction

Yibo Yan et al.

ACS NANO (2018)

Add to Collection

Article Engineering, Environmental

Enhanced photocatalytic CO2 reduction via the synergistic effect between Ag and activated carbon in TiO2/AC-Ag ternary composite

Zaiyong Jiang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

Rhenium-modified porous covalent triazine framework for highly efficient photocatalytic carbon dioxide reduction in a solid-gas system

Rui Xu et al.

CATALYSIS SCIENCE & TECHNOLOGY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Progress in Research into 2D Graphdiyne-Based Materials

Changshui Huang et al.

CHEMICAL REVIEWS (2018)

Add to Collection

Review Chemistry, Physical

Metal-organic frameworks (MOFs) for photocatalytic CO2 reduction

Yi Chen et al.

CATALYSIS SCIENCE & TECHNOLOGY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

CO2 Reduction: From the Electrochemical to Photochemical Approach

Jinghua Wu et al.

ADVANCED SCIENCE (2017)

Add to Collection

Review Chemistry, Physical

Graphitic C3N4 based noble-metal-free photocatalyst systems: A review

Dilshad Masih et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Review Chemistry, Physical

Advances in Photocatalytic CO2 Reduction with Water: A Review

Samsun Nahar et al.

MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Design of Novel Visible Light Active Photocatalyst Materials: Surface Modified TiO2

Michael Nolan et al.

ADVANCED MATERIALS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Smart Utilization of Carbon Dots in Semiconductor Photocatalysis

Huijun Yu et al.

ADVANCED MATERIALS (2016)

Add to Collection

Review Chemistry, Physical

Carbon-based H2-production photocatalytic materials

Shaowen Cao et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

On the general mechanism of photocatalytic reduction of CO2

Elham Karamian et al.

JOURNAL OF CO2 UTILIZATION (2016)

Add to Collection

Article Chemistry, Physical

Graphene-Based Photocatalysts for CO2 Reduction to Solar Fuel

Jingxiang Low et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Designed porous carbon materials for efficient CO2 adsorption and separation

Zhang Xiang-qian et al.

NEW CARBON MATERIALS (2015)

Add to Collection

Article Chemistry, Organic

The Potential of Carbon-based Materials for Photocatalytic Application

Jian Wang et al.

CURRENT ORGANIC CHEMISTRY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Studies on Photocatalytic CO2 Reduction over NH2-Uio-66(Zr) and Its Derivatives: Towards a Better Understanding of Photocatalysis on Metal-Organic Frameworks

Dengrong Sun et al.

CHEMISTRY-A EUROPEAN JOURNAL (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Controlling the Effective Surface Area and Pore Size Distribution of sp2 Carbon Materials and Their Impact on the Capacitance Performance of These Materials

Long Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Review Environmental Sciences

A Review of CO2 Capture by Absorption and Adsorption

Cheng-Hsiu Yu et al.

AEROSOL AND AIR QUALITY RESEARCH (2012)

Add to Collection

Article Chemistry, Physical

Photocatalytic reduction of CO2 over noble metal-loaded and nitrogen-doped mesoporous TiO2

Xiukai Li et al.

APPLIED CATALYSIS A-GENERAL (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Thermodynamics and kinetics of CO2, CO, and H+ binding to the metal centre of CO2 reduction catalysts

Jacob Schneider et al.

CHEMICAL SOCIETY REVIEWS (2012)

Add to Collection

Article Chemistry, Physical

CO2 adsorption by activated templated carbons

Marta Sevilla et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Feasibility of Single-Walled Carbon Nanotubes as Materials for CO2 Adsorption: A DFT Study

David Quinonero et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Add to Collection

Article Chemistry, Physical

Visible-fight-responsive photocatalysts xBiOBr-(1-x)BiOI

Wendeng Wang et al.

CATALYSIS COMMUNICATIONS (2008)

Add to Collection

Review Chemistry, Multidisciplinary

Metal nanopartictes and related materials supported on carbon nanotubes: Methods and applications

GG Wildgoose et al.

SMALL (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.