Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Yutong Yang et al.
Summary: A self-healing hydrogel with adhesion was prepared as a sensor for winter sports, which exhibited excellent ionic conductivity, water retention ability, frost resistance, mechanical properties, and UV resistance. It has great potential for application in flexible wearable devices for winter sports.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2023)
Article
Chemistry, Analytical
Dongzhi Zhang et al.
Summary: This study developed an accurate and reliable quartz crystal microbalance (QCM) humidity sensor based on the chitosan-halloysite nanotubes (CS-HNTs) composite for monitoring respiration lines. The CS-HNTs film showed high sensitivity (69.1 Hz/% RH), superior humidity hysteresis (<2.8% RH), excellent long-term stability, repeatability, and outstanding selectivity. The QCM humidity sensor could detect subtle changes in fingertip movements and exhaled air humidity in different modes. A respiratory behavior monitoring model based on support vector machines accurately determined five breathing modes for human breath detection and health medical diagnosis.
SENSORS AND ACTUATORS B-CHEMICAL
(2023)
Article
Chemistry, Analytical
Ajay Beniwal et al.
Summary: This article presents a flexible, cost-effective, and disposable humidity sensor developed on a paper substrate. The sensor demonstrates good sensing performance, high flexibility, stability, repeatability, short response/recovery time, and good reproducibility. The sensor's efficacy is evaluated for spatial humidity monitoring, respiration rate monitoring, and soil moisture monitoring, showing its potential applications in environmental, agricultural, and healthcare fields.
SENSORS AND ACTUATORS B-CHEMICAL
(2023)
Article
Engineering, Environmental
Min Yuan et al.
Summary: In this work, a multifunctional intelligent wearable band-aid is designed by integrating a high-performance micro-supercapacitor (MSC) and humidity and pressure sensors through laser-scribing and carbon nanotubes drop-casting strategy. This band-aid based integrated system offers excellent capacitance, fast response, and high sensitivity, paving a new avenue for smart wearable and flexible electronics development.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Nanoscience & Nanotechnology
Mengxue Luo et al.
Summary: This study focuses on the application of surface engineering to fabricate low-cost Ag/PI wireless humidity sensors with a resonant frequency of 2.45 GHz. The sensors are obtained through in situ metallization technique coupled with inkjet printing, with PI playing multiple roles as a flexible substrate, ionexchange surface, and sensing material to moisture. By loading different ions on the PI surface to improve hydrophilicity, the humidity sensitivity is enhanced. The wireless humidity sensor loaded with K+ ions shows the maximum sensitivity at both low and high relative humidity ranges. The sensor also demonstrates excellent mechanical performance and stability, making it suitable for real-time humidity monitoring in automated industry and healthcare.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Analytical
Cheng Lei et al.
Summary: This paper investigates the humidity sensitivity of a rGO-SDS composite film humidity sensor and demonstrates its performance under different temperatures through experiments and analysis.
Article
Chemistry, Physical
Zhenyuan Xu et al.
Summary: A humidity sensor driven by a dual-TENG has been developed for humidity detection at room temperature. The sensor exhibits high response linearity and can detect a wide range of humidity. It can also be used to monitor finger distance and response to water passing over the sensor surface, with the signals sent to a smart terminal for analysis.
Article
Chemistry, Physical
Tianhao Liu et al.
Summary: A halloysite nanotube/reduced graphene oxide/cobalt nickel composite was synthesized and characterized. The composite showed excellent electromagnetic absorption performance, which was attributed to the synergistic effect of multiple electromagnetic loss mechanisms.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Nanoscience & Nanotechnology
Weiyu Yan et al.
Summary: In this study, a quartz crystal microbalance (QCM) sensor was fabricated using guar gum (GG) and electro-spun ethyl cellulose-polyvinyl pyrrolidone (EC-PVP) nanofibers as humidity-sensitive materials. The GG/EC-PVP-coated QCM sensor exhibited high sensitivity, low hysteresis, excellent selectivity, good repeatability, and stability in a wide range of relative humidity. The sensor's hydrophilic groups and porous structure contributed to its enhanced humidity sensitivity. The GG/EC-PVP sensor could capture and measure typical breathing patterns in different human emotions, and could also be used for lie detection.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Analytical
Qiao Chen et al.
Summary: This paper fabricated a high-performance nanodiamond/cellulose nanocrystal composite-based acoustic humidity sensor and investigated its humidity sensing properties and adsorption mechanism. The results show that the sensor exhibits high sensitivity, low humidity hysteresis, and fast response/recovery times.
SENSORS AND ACTUATORS B-CHEMICAL
(2022)
Article
Chemistry, Analytical
Yimeng Yang et al.
Summary: This study synthesized a humidity sensor based on hyperbranched sulfonated polysiloxane with carboxyl groups, demonstrating high sensitivity and rapid response in a wide humidity range. Additionally, the sensor showed stability and reproducibility, making it suitable for non-contact distance detection, command recognition, and respiration monitoring.
SENSORS AND ACTUATORS B-CHEMICAL
(2022)
Article
Chemistry, Physical
A. S. R. A. Subki et al.
Summary: This work presents a nanocomposite-based humidity sensor that achieves enhanced sensing performance at room temperature by incorporating reduced graphene oxide (rGO) into zinc oxide nanostructured powder (ZNP) nanoparticles. The nanocomposite-based humidity sensor was fabricated using cellulose filter paper and clear paper glue through a brush printing method. Various characterization techniques were employed to investigate the properties of the nanocomposites. The sensor showed the highest sensitivity and sensing response when loaded with 1.0 wt% of rGO.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Polymer Science
Dongdong Shen et al.
Summary: This article introduces a flexible, responsive, and stable humidity sensor (BNFM) based on Zinc oxide NPs-Polyvinylidene fluoride (ZnO-PVDF), inspired by the microstructure of the Namib Desert Beetle. The sensor exhibits excellent sensitivity and response/recovery time, and can be used for real-time detection of human breath conditions inside a mask.
Article
Engineering, Electrical & Electronic
Xiangrong Li et al.
Summary: The study introduced a surface acoustic wave sensor coating with MoS2/GO nano composite, which exhibited high humidity sensitivity and thermal stability. The sensor showed excellent performance at different humidity levels, making it suitable for applications in medical care, environmental monitoring, and cultural relic preservation.
SENSORS AND ACTUATORS A-PHYSICAL
(2022)
Article
Chemistry, Physical
Shubhankar Dube et al.
Summary: This article comprehensively reviews the potential and issues of HNTs as drug carriers, and discusses their safety across different cell lines and model organisms. Furthermore, it provides insights into the impact of HNTs' surface chemistry and release kinetics on therapeutic efficacy, as well as unexplored areas in current research.
ADVANCES IN COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Inorganic & Nuclear
Y. T. Ravikiran et al.
Summary: This paper presents a comparative study on the humidity sensing performance of conducting polymers polyaniline (PANI) and polypyrrole (PPy). The results show that PPy exhibits better performance in humidity sensing, with higher response rate and faster response time. In addition, PPy also demonstrates better sensitivity, lower detection limit, better linearity, lower humidity hysteresis, and higher stability.
INORGANIC CHEMISTRY COMMUNICATIONS
(2022)
Article
Engineering, Electrical & Electronic
Sourav Pan et al.
Summary: In this study, a humidity sensor working at low pressure is demonstrated using SnO2 Quantum Dots(QDs). These QDs possess a large surface area, enabling them to absorb moisture even at low pressure. The correlation between the QDs and humidity sensing is extensively investigated, achieving high reproducibility performance under vacuum for the first time.
SENSORS AND ACTUATORS A-PHYSICAL
(2022)
Article
Chemistry, Analytical
Xuan Zhao et al.
Summary: In this paper, a QCM humidity sensor based on TiO2/Ag composite nanowires was developed. The sensor showed high response and ultrashort reaction time, surpassing most QCM humidity sensors. It has the potential to be used for respiratory monitoring of infectious patients, reducing the risk of respiratory droplet infection.
SENSORS AND ACTUATORS B-CHEMICAL
(2022)
Article
Chemistry, Applied
Mimi Han et al.
Summary: Inspired by nacre-layered nanostructure, 1D TEMPO-oxidized cellulose nanofibers were used as a template to assemble 2D MXene nanosheets into a flexible and strong nanocomposite film. The film exhibited excellent humidity-sensing performance and showed potential applications in smart wearable electronics.
CARBOHYDRATE POLYMERS
(2022)
Review
Engineering, Electrical & Electronic
Burcu Arman Kuzubasoglu
Summary: This study reviews a variety of humidity measurement instruments made of different materials and operating on different principles that are currently available. It also discusses the classification methods for these instruments based on their working principles. The study further explores the commonly used designs for flexible humidity sensors, humidity-sensitive materials, sensing mechanisms, major properties of humidity sensors, and the influence of temperature on humidity sensors. Additionally, it provides an overview of current research in this area, as well as the existing challenges.
ACS APPLIED ELECTRONIC MATERIALS
(2022)
Article
Chemistry, Analytical
Gaopeng Jiang et al.
Summary: This work introduces a novel acetone fuel cell sensor (AFCS) based on high temperature polymer electrolyte membrane, which shows insensitivity to humidity, excellent water management, and high sensor response, making it promising for acetone vapor detection.
SENSORS AND ACTUATORS B-CHEMICAL
(2021)
Article
Engineering, Environmental
Penghui Zhu et al.
Summary: A flexible paper-based humidity sensor was designed based on conductive TEMPO-oxidized cellulose fibers and carbon nanotubes, exhibiting excellent humidity responsive property, outstanding linearity, and durability.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Materials Science, Multidisciplinary
Pengfei Jiang et al.
Summary: In this study, the introduction of a strong electron acceptor group, the sulfoxide bond, into the CPI chain improved its optical properties, resulting in higher transparency and lower yellow index. Experimental results and theoretical calculations showed that the incorporation of the sulfoxide group significantly influenced the optical properties of CPI, including refractive index and retardation.
MACROMOLECULAR MATERIALS AND ENGINEERING
(2021)
Article
Chemistry, Analytical
Zhou Zheng et al.
Summary: The study demonstrates the advantages of functionalizing CMUT with inkjet-printed GO film in terms of high sensitivity and low hysteresis. Using GO films of different thicknesses can achieve high humidity sensitivity, fast response time, and low hysteresis. The inkjet printing technique shows great potential for functionalizing CMUT.
SENSORS AND ACTUATORS B-CHEMICAL
(2021)
Article
Nanoscience & Nanotechnology
Dongyue Wang et al.
Summary: A self-powered flexible humidity sensor integrated with PVA/MXene nanofibers film and MoSe2 PENG technology was reported in this study. The sensor exhibits high response rate, fast response/recovery time, low hysteresis, and excellent repeatability, making it suitable for detecting human skin moisture and ambient humidity.
NANO-MICRO LETTERS
(2021)
Article
Chemistry, Multidisciplinary
Muhammad Saqib et al.
Summary: The performance of an electronic device heavily depends on the availability of suitable functional materials. By synthesizing a novel composite of GrF/ZnO, a highly sensitive humidity sensor with various excellent characteristics was developed, showing promise for applications such as health monitoring.
Article
Engineering, Electrical & Electronic
Muhammad Yaseen et al.
Summary: This study synthesized a humidity sensor with nanofibers showing high capacitance response and excellent sensing performance, with the addition of TiC further enhancing the sensing ability.
SENSORS AND ACTUATORS A-PHYSICAL
(2021)
Article
Chemistry, Analytical
Milan Shrestha et al.
Summary: The novel humidity sensor proposed in this study utilizes a 'hydromorphic' dielectric elastomer actuator to accurately measure high humidity. By using hygroscopic polymer electrodes and a water-inert acrylic dielectric elastomer layer, the sensor remains operational even when exposed to water droplets.
SENSORS AND ACTUATORS B-CHEMICAL
(2021)
Article
Materials Science, Paper & Wood
Chengcheng Cai et al.
Summary: A sensitive humidity responsive sensor based on sodium hyaluronate (SH)/multi-walled carbon nanotubes (MWCNTs) composite film is reported in this study. The sensor exhibits a broad detection range for relative humidity, fast response/recovery performance, and excellent stability, showing potential applications in breath monitoring, respiration pattern identification, and touchiness switch.
Article
Chemistry, Applied
Hongyuan Zhao et al.
Summary: A scalable and controllable ultrasound-assisted strategy was reported for the preparation of Vulcan XC-72 nanoparticles-decorated halloysite nanotubes (HNTs@VXC-72) to modify glassy carbon electrode for the highly sensitive electrochemical determination of niclosamide. The combination of VXC-72 nanoparticles and HNTs produced a synergistic enhancement effect in the sensor, showing a relatively low detection limit and good linear range for NA determination. The sensor also exhibited good practical feasibility in food samples analysis, promising a new approach for ensuring food safety through NA determination.
Article
Nanoscience & Nanotechnology
Xiaoyi Wang et al.
Summary: The study introduces a flexible and low-cost humidity sensor with ultrafast response, high sensitivity, low hysteresis, and good stability. The sensor has been applied in precise human respiration monitoring, noncontact electrical safety warning, and noncontact pipe leakage detection.
MICROSYSTEMS & NANOENGINEERING
(2021)
Article
Materials Science, Paper & Wood
Jianhua Ma et al.
Summary: Mechanically strong and highly conductive cellulose/carbon nanotube (CNT) composite fibers were successfully spun using an aqueous alkaline/urea solution, showing excellent mechanical strength and high electrical conductivity for applications in joule heating and humidity measurement.
Article
Chemistry, Analytical
Zaihua Duan et al.
Summary: By analyzing the physical and chemical properties of daily writing carbon ink, researchers were able to fabricate a high-performance humidity sensor. This sensor showed positive humidity sensitive characteristics, wide detection range, low detection limit, and high detection resolution, making it a promising option for further research in this field.
SENSORS AND ACTUATORS B-CHEMICAL
(2021)
Article
Chemistry, Analytical
He Yu et al.
Summary: This paper focuses on the optimization of humidity sensor preparation and manufacturing, utilizing advanced raw material mixtures and additives to improve film performance, ultimately ensuring film quality and production performance consistency through the integrated passive device (IPD) manufacturing process.
SENSORS AND ACTUATORS B-CHEMICAL
(2021)
Review
Materials Science, Multidisciplinary
Zaihua Duan et al.
Summary: Humidity sensors have attracted great attention in human body-related humidity detection, and significant efforts have been devoted to the development of human body-related humidity sensors in recent years. Despite remarkable achievements, many challenges still exist in this field.
JOURNAL OF MATERIALS CHEMISTRY C
(2021)
Article
Engineering, Electrical & Electronic
Ashis Tripathy et al.
Summary: In this study, a flexible capacitive humidity sensor based on Armalcolite-PDMS was designed, showing fast response and recovery times, as well as ultra-low hysteresis. The developed sensor demonstrated long-term stability after being recorded for 30 days. The sensing mechanism was investigated through impedance plots in different humidity environments.
IEEE SENSORS JOURNAL
(2021)
Article
Materials Science, Ceramics
Bharat Sharma et al.
CERAMICS INTERNATIONAL
(2020)
Article
Chemistry, Inorganic & Nuclear
A. M. Abu El-Soad et al.
JOURNAL OF ORGANOMETALLIC CHEMISTRY
(2020)
Article
Engineering, Multidisciplinary
Xuesong Yao et al.
Article
Chemistry, Analytical
Zaihua Duan et al.
SENSORS AND ACTUATORS B-CHEMICAL
(2020)
Article
Chemistry, Inorganic & Nuclear
Kuo-Yuan Hwa et al.
INORGANIC CHEMISTRY FRONTIERS
(2020)
Article
Chemistry, Multidisciplinary
Penghui Zhu et al.
Review
Chemistry, Multidisciplinary
Chao Lv et al.
Article
Chemistry, Analytical
B. Chethan et al.
Review
Chemistry, Analytical
Emad S. Goda et al.
MICROCHEMICAL JOURNAL
(2019)
Review
Polymer Science
Yang Wu et al.
Article
Physics, Applied
Minki Lee et al.
APPLIED PHYSICS LETTERS
(2019)
Article
Chemistry, Analytical
M. Velumani et al.
SENSORS AND ACTUATORS B-CHEMICAL
(2019)
Article
Engineering, Chemical
Zhixiao Liu et al.
JOURNAL OF MEMBRANE SCIENCE
(2018)
Article
Chemistry, Analytical
Zhuang Zhuang et al.
SENSORS AND ACTUATORS B-CHEMICAL
(2017)
Review
Chemistry, Multidisciplinary
Yuri Lvov et al.
ADVANCED MATERIALS
(2016)
Article
Engineering, Chemical
Guangyong Zeng et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2016)
Article
Engineering, Electrical & Electronic
Daewoong Jung et al.
SENSORS AND ACTUATORS A-PHYSICAL
(2015)
