☆ 4.5 Article

Green Recovery of Ti, W, and V From Spent V2O5-WO3/TiO2 Catalyst to Prepare W- and V-Containing Si-Ti Alloy

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Effect of MgO/Al2O3 and CaO/SiO2 on the Metallurgical Properties of CaO-SiO2-Al2O3-MgO-TiO2 Slag

Guo-xing Qiu et al.

Summary: The melting performance and viscosities of CaO-SiO2-17.5wt.%Al2O3-MgO-2wt.%TiO2 slags were studied. The results showed that viscosity and the activation energy for viscous flow decreased with an increase of MgO/Al2O3, while they decreased with an increase of CaO/SiO2. The thermal stability of the slags was not significantly affected by CaO/SiO2. The optimal CaO/SiO2 and MgO/Al2O3 ratios were 1.24 and 0.37, respectively, which resulted in slags with good fluidity and stability.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Recovery of Ti-bearing blast furnace slag and diamond wire saw silicon powder waste by alloying and electromagnetic separation technique

Huazhen Gu et al.

Summary: This paper investigates the possibility of metal thermal reduction of Ti-bearing blast furnace slag (TBFS) using the molecular interaction volume model (MIVM). The study focuses on the recovery of titanium (Ti) and silicon (Si) from TBFS and diamond wire saw silicon powder (DWSSP) waste using metal thermal reduction and electromagnetic separation technique. The results show that the addition of CaF2 improves the separation of the alloy from the slag. Si and TiSi2 are the main phases in the recovered alloy.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Chemistry, Multidisciplinary

An approach to prepare high-purity TiSi2 for clean utilization of Ti-bearing blast furnace slag

Zhanchao Li et al.

Summary: This study proposes a new method for preparing high-purity TiSi2 using Ti-bearing blast furnace slag and low-purity Si. The results show that Si-Ti solvent refining significantly enhances the removal ratios of impurities. This study provides a new technical route for the green, efficient, and economical utilization of Ti-bearing blast furnace slag.

GREEN CHEMISTRY (2022)

Add to Collection

Article Materials Science, Ceramics

Corrosion behavior of carbon, Al2O3, and MgO refractories during the preparation of a Ti-Si-Al alloy via the aluminothermic reduction of a Ti-bearing blast-furnace slag

Yakun Zhang et al.

Summary: The study focused on investigating the corrosion behavior of refractories during the aluminothermic reduction of Ti-bearing blast-furnace slag (TBFS) and determining the most suitable refractories for this process. It was found that alumina and magnesia bricks were more effective in obtaining Ti-Si-Al alloy and reducing mass loss compared to carbon bricks. Additionally, the study revealed that the corrosion of alumina and magnesia bricks increased with the addition of CaO, with alumina bricks showing more severe corrosion compared to magnesia bricks. The highest extraction ratio of Ti (99.85%) was achieved when using magnesia bricks, making them the optimal refractory for the process.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Chemical

A clean and efficient approach for recovery of vanadium and tungsten from spent SCR catalyst

Yijun Cao et al.

Summary: This study aims to develop a clean, green, and economical method for the recovery of valuable metals and regeneration of spent SCR catalysts. The leaching process and mechanism were investigated, and the raw material and residue were characterized by XRD, SEM-EDS, XPS, and Raman analysis to obtain ammonium paratungstate (APT) and vanadium pentoxide. The stable crystal structure of the leaching residue serves as a carrier for the regenerated catalyst, introducing a new perspective for the efficient and comprehensive usage of the spent SCR catalyst.

MINERALS ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Constructing cycle-stable Si/TiSi2 composites as anode materials for lithium ion batteries through direct utilization of low-purity Si and Ti-bearing blast furnace slag

Yuchao Zhang et al.

Summary: This study successfully prepared Si/TiSi2 composites as anode materials for lithium-ion batteries by coupling photovoltaic silicon waste and metallurgical waste through a new method, and found that the cycling stability of the materials was enhanced when more TiSi2 was introduced.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Chemical

Preparation of high-purity TiSi2 and eutectic Si-Ti alloy by separation of Si-Ti alloy for clean utilization of Ti-bearing blast furnace slag

Zhanchao Li et al.

Summary: A new process was proposed to prepare high-purity Titanium disilicide and eutectic Si-Ti alloy using Ti-bearing blast furnace slag and low-purity Si. The obtained Si-Ti alloy was separated into TiSi2 and eutectic Si-Ti alloy by directional crystallization, with MgO crucibles found to have little influence on the purity of the products. This study provides a basis for the simultaneous preparation of TiSi2 and eutectic Si-Ti alloy materials from Ti-bearing blast furnace slag.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Thermodynamics

Application of phase equilibrium studies of CaO-SiO2-Al2O3-MgO system for oxide inclusions in Si-deoxidized steels

Sha Lyu et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Cooling Rate on Crystallization Behavior of CaO-SiO2-MgO-Cr2O3 Based Slag

Qiang Zeng et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Leaching of spent selective catalytic reduction catalyst using alkaline melting for recovery of titanium, tungsten, and vanadium

Gyeonghye Moon et al.

HYDROMETALLURGY (2019)

Add to Collection

Article Physics, Applied

Effects of Cu, Zn, W and Mo on the compression properties of in-situ nano-Ti5Si3/TiAl composite

Hongyu Yang et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2019)

Add to Collection

Article Chemistry, Physical

CaSO4 deactivated V2O5-WO3/TiO2 SCR catalyst for a diesel power plant. Characterization and simulation of the kinetics of the SCR reactions

C. U. Ingemar Odenbrand

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Selective reduction leaching of vanadium and iron by oxalic acid from spent V2O5-WO3/TiO2 catalyst

Wenfen Wu et al.

HYDROMETALLURGY (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Major gas emissions from combustion of slurry fuels based on coal, coal waste, and coal derivatives

Margarita A. Dmitrienko et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Extraction of tungsten and vanadium from spent selective catalytic reduction catalyst for stationary application by pressure leaching process

In-Hyeok Choi et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Editorial Material Engineering, Environmental

The future of coal in China

Jiahai Yuan

RESOURCES CONSERVATION AND RECYCLING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Green Recovery of Titanium and Effective Regeneration of TiO2 Photocatalysts from Spent Selective Catalytic Reduction Catalysts

Qijun Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Sustainable Approach for Spent V2O5-WO3/TiO2 Catalysts Management: Selective Recovery of Heavy Metal Vanadium and Production of Value-Added WO3-TiO2 Photocatalysts

Qijun Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Optimizing vanadium and tungsten leaching with lowered silicon from spent SCR catalyst by pre-mixing treatment

Qingfa Su et al.

HYDROMETALLURGY (2018)

Add to Collection

Article Chemistry, Physical

Study of the V2O5-WO3/TiO2 Catalyst Synthesized from Waste Catalyst on Selective Catalytic Reduction of NOx by NH3

Chunping Qi et al.

CATALYSTS (2017)

Add to Collection

Article Chemistry, Physical

A neutral and coordination regeneration method of Ca-poisoned V2O5-WO3/TiO2 SCR catalyst

Xiansheng Li et al.

CATALYSIS COMMUNICATIONS (2017)

Add to Collection

Article Thermodynamics

NOx reduction and N2O emissions in a diesel engine exhaust using Fe-zeolite and vanadium based SCR catalysts

Chong Pyo Cho et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Chemistry, Physical

Mechanism of arsenic poisoning on SCR catalyst of CeW/Ti and its novel efficient regeneration method with hydrogen

Xiang Li et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection

Article Engineering, Environmental

Low temperature SCR on supported MnOx catalysts for marine exhaust gas cleaning: Effect of KCl poisoning

S. Cimino et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Article Chemistry, Physical

Effects of mercury oxidation on V2O5-WO3/TiO2 catalyst properties in NH3-SCR process

Jian Yang et al.

CATALYSIS COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Recovery of tungsten from spent selective catalytic reduction catalysts by pressure leaching

Joung Woon Kim et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Reduction of Titanium Oxide by Molten Silicon to Synthesize Titanium Silicide

Zhiyuan Chen et al.

MATERIALS TRANSACTIONS (2015)

Add to Collection

Article Chemistry, Physical

VOx Surface Coverage Optimization of V2O5/WO3-TiO2 SCR Catalysts by Variation of the V Loading and by Aging

Adrian Marberger et al.

CATALYSTS (2015)

Add to Collection

Article Engineering, Chemical

Kinetics of Vanadium Leaching from a Spent Industrial V2O5/TiO2 Catalyst by Sulfuric Acid

Qichao Li et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Add to Collection

Article Materials Science, Multidisciplinary

First-principles study of the structural and elastic properties of Ti5Si3 with substitutions Zr, V, Nb, and Cr

Hui-Yuan Wang et al.

JOURNAL OF MATERIALS RESEARCH (2010)

Add to Collection

Article Chemistry, Physical

Promotional Effect of Ce-doped V2O5-WO3/TiO2 with Low Vanadium Loadings for Selective Catalytic Reduction of NOx by NH3

Liang Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2009)

Add to Collection

Article Physics, Applied

Synthesis and field emission properties of TiSi2 nanowires -: art. no. 243103

B Xiang et al.

APPLIED PHYSICS LETTERS (2005)

Add to Collection

Article Materials Science, Ceramics

Critical thermodynamic evaluation and optimization of the CaO-MgO-SiO2 system

IH Jung et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.