☆ 4.7 Article

Ultrasonic imaging of damage in plates in spectral ripple frequency domain

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Assessment of the 3D ply-by-ply fiber structure in impacted CFRP by means of planar Ultrasound Computed Tomography (pU-CT)

Xiaoyu Yang et al.

Summary: The study introduces a new technique for reconstructing the local fiber architecture of impacted CFRP laminates. By using the developed planar ultrasound computed tomography (pU-CT) technique, accurate information on fiber orientation and structural changes can be obtained.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Materials Science, Composites

Advanced non-destructive evaluation of impact damage growth in carbon-fiber-reinforced plastic by electromechanical analysis and machine learning clustering

In Yong Lee et al.

Summary: This study conducted advanced structural health monitoring on CFRP through a non-destructive self-sensing method, identifying different damage types in composite structures using only electromechanical behavior. The proposed method was successfully applied to assess impact damage on a three-dimensional wind turbine blade, demonstrating its industry application in analyzing damage type and monitoring health state of CFRP composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mechanics

Probabilistic ultrasound C-scan imaging of barely visible impact damage in CFRP laminates

Jeroen Vandendriessche et al.

Summary: In this paper, a statistical time-energy gating approach is proposed to improve the assessment of barely visible impact damage in ultrasonic pulse-echo imaging. The method successfully extracts and quantifies the full extent of the complex impact damage cluster and demonstrates good noise resistance.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Multidisciplinary

In situ elastic constant determination of unidirectional CFRP composites via backwall reflected multi-mode ultrasonic bulk waves using a linear array probe

Huanqing Cao et al.

Summary: This paper proposes a novel ultrasonic method for in situ determination of elastic constants of a transversely isotropic carbon fiber reinforced plastic. The method is single sided, easy to operate, without the necessity of sample preparation, water immersion, and extra rotation device. It can determine all elastic constants with high precision.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Image reconstruction of immersed ultrasonic testing for strongly attenuative materials

Haoran Jin et al.

Summary: This paper presents an ultrasound reconstruction method that compensates for attenuation and dispersion, aiming to address the imaging issues in composite and polymer materials. The proposed method corrects reconstruction deviations, improves image resolution, and restores details caused by depth variant attenuation and dispersion.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Automated detection and characterisation of defects from multiview ultrasonic imaging

Rhodri L. T. J. Bevan et al.

Summary: This paper explores the application of different off the shelf machine learning models for ultrasonic phased array immersion inspection. By using a well validated forward model, training sets with arbitrary sizes and defect locations can be generated, allowing relative assessment of the capabilities of various ML models. The paper shows that shallow learning performs similarly to deep learning in defect detection, and deep learning models offer excellent performance in defect characterisation as well as potential for repurposing to different challenges.

NDT & E INTERNATIONAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Exploring 3D elastic-wave scattering at interfaces using high-resolution phased-array system

Yoshikazu Ohara et al.

Summary: This study proposes a method for exploring 3D elastic-wave scattering based on a high-resolution 3D phased-array system. By decomposing cracks into scattering sources and extracting 3D elastic-wave scattering near each response, valuable information about the internal responses of fatigue cracks can be obtained.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Engineering, Mechanical

Ultrasonic full-matrix imaging of curved-surface components

Kaipeng Ji et al.

Summary: In this paper, an ultrasonic imaging method based on frequency-domain reverse-time migration (FD-RTM) was developed for defect detection in curved-surface components (CSC). The method showed high-quality imaging and obvious advantages compared to existing methods.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Deep learning in automated ultrasonic NDE - Developments, axioms and opportunities

Sergio Cantero-Chinchilla et al.

Summary: This paper reviews the state-of-the-art of autonomous ultrasonic NDE enabled by DL methodologies. By placing DL methods in the context of general NDE automation levels, this paper aims to provide a roadmap for future research and development in the area.

NDT & E INTERNATIONAL (2022)

Add to Collection

Article Engineering, Manufacturing

Effects of environmental conditions on uncured prepreg characteristics and their effects on defect generation during autoclave processing

C. Netzel et al.

Summary: The study focuses on defect formation in autoclave prepreg processing, specifically on concave female corners. It shows that humidity exposure affects uncured prepreg characteristics and consolidation quality, with defects already occurring during layup and debulking processes.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Mechanical

Structural damage assessment through features in quefrency domain

Marcello Morgantini et al.

Summary: The paper explores the extraction of damage sensitive features from dynamic responses in the quefrency domain, providing a new approach for structural damage assessment through vibration based analysis. The utilization of cepstral coefficients in this domain allows for a reduction in dimensionality and simplification in extracting sensitive features compared to natural frequencies, demonstrating effectiveness in damage assessment strategies validated through simulations and experiments.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Acoustics

Parametric study on interply tracking in multilayer composites by analytic-signal technology

Xiaoyu Yang et al.

Summary: Researchers proposed using ultrasound and analytic-signal concepts for reconstructing the internal ply structure of composites, analyzing the errors of interply tracking based on a wide range of parameters. The study also provided guidelines on improving the performance of the interply tracking procedure in practical measurements. Experimental results showed that the combination of analytic-signal procedure with a standard log-Gabor filter in the frequency domain efficiently derived the interply tracks of a 24-layer composite laminate.

ULTRASONICS (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Automated defect detection for ultrasonic inspection of CFRP aircraft components

Loic Seguin-Charbonneau et al.

Summary: An automated task sequence based on the commercial software Ultis (R) combined with new pre- and post-processing tools has been developed to achieve a fully automated analysis of ultrasonic data from large and complex CFRP components, significantly reducing analysis time while meeting detection requirements.

NDT & E INTERNATIONAL (2021)

Add to Collection

Review Engineering, Multidisciplinary

Current status of carbon fibre and carbon fibre composites recycling

Jin Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Acoustics

Flaw detection with ultrasonic backscatter signal envelopes

Yongfeng Song et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2019)

Add to Collection

Article Engineering, Multidisciplinary

CFRP barely visible impact damage inspection based on an ultrasound wave distortion indicator

Xiaofei Zhang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Manufacturing

Detection and imaging of local ply angle in carbon fiber reinforced plastics using laser ultrasound and tilt filter processing

L. Ambrozinski et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Engineering, Manufacturing

Failure mechanisms and damage evolution of laminated composites under compression after impact (CAI): Experimental and numerical study

X. C. Sun et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Acoustics

Ultrasonic Analytic-Signal Responses From Polymer-Matrix Composite Laminates

Robert A. Smith et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2018)

Add to Collection

Article Mechanics

Low-velocity impact predictions of composite laminates using a continuum shell based modeling approach Part b: BVID impact and compression after impact

Solver I. Thorsson et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Mechanical

A history of cepstrum analysis and its application to mechanical problems

Robert B. Randall

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Article Engineering, Mechanical

In situ Barely Visible Impact Damage detection and localization for composite structures using surface mounted and embedded PZT transducers: A comparative study

M. Dziendzikowski et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

The Pulsed Ultrasonic Backscatter Polar Scan and its Applications for NDT and Material Characterization

M. Kersemans et al.

EXPERIMENTAL MECHANICS (2014)

Add to Collection

Article Engineering, Mechanical

Application of power spectrum, cepstrum, higher order spectrum and neural network analyses for induction motor fault diagnosis

B. Liang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Add to Collection

Article Materials Science, Characterization & Testing

Resolution enhancement of ultrasonic defect signals for crack sizing

B. Shakibi et al.

NDT & E INTERNATIONAL (2012)

Add to Collection

Article Materials Science, Characterization & Testing

Automatic ultrasonic inspection for internal defect detection in composite materials

T. D'Orazio et al.

NDT & E INTERNATIONAL (2008)

Add to Collection

Article Engineering, Multidisciplinary

Ultrasonic evaluation of matrix damage in impacted composite laminates

F Aymerich et al.

COMPOSITES PART B-ENGINEERING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.