☆ 4.7 Article

A new optimal sensor placement method for virtual sensing of composite laminate

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

A methodology for sensor number and placement optimization for vibration-based damage detection of composite structures under model uncertainty

Haichao An et al.

Summary: This paper introduces a novel framework for optimizing the number and placement of sensors in vibration-based damage detection in composite structures. The framework incorporates modal effective mass fractions to determine target vibration modes and proposes a modal kinetic-energy-based index to reduce the design space. The optimization problem is solved using the nondominated sorting genetic algorithm II and Monte Carlo simulation.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Multi-objective optimization for sensor placement: An integrated combinatorial approach with reduced order model and Gaussian process

Zhaoyi Xu et al.

Summary: This novel sensor placement method integrates reduced order modeling and multi-objective combinatorial optimization to maximize monitoring performance and minimize deployment cost. The method has been evaluated using the temperature dataset of the Berkeley Intel Lab, demonstrating improved state estimation accuracy and smaller reconstruction errors compared to alternative methods.

MEASUREMENT (2022)

Add to Collection

Article Engineering, Mechanical

A novel load-dependent sensor placement method for model updating based on time-dependent reliability optimization considering multi-source uncertainties

Chen Yang et al.

Summary: This study proposes a time-dependent, reliability-based method for optimal load-dependent sensor placement considering multi-source uncertainties. Uncertainties from structural properties and measurement processes are regarded as interval variables in the study, and an optimization approach using NSGA-II is used to match the modal coordinates of reduced and full models.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Marine

A new method for optimal sensor placement considering multiple factors and its application to deepwater riser monitoring systems

Yulong Zhang et al.

Summary: A novel multi-factor optimal sensor placement (OSP) strategy, named effective independence-acceleration amplitude-total displacement (EI-AA-TD) method, is proposed in this study, which integrates kinetic energy and strain energy into the classic EI method. The contribution matrixes associated with these two energy indexes are discussed, and a multifactor optimization framework for sensor placement is formulated by integrating energy perspective contribution matrixes and modal observability perspective EI coefficient vector. Additionally, a comprehensive scoring evaluation technique is proposed to assess the quality of sensor layout, and the proposed EI-AA-TD method is validated through a study case of deepwater riser monitoring systems, showing excellent scores and effectiveness of the methods.

OCEAN ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

On the Bayesian sensor placement for two-stage structural model updating and its validation

Sahil Bansal et al.

Summary: This study proposes an optimal Bayesian sensor placement approach for updating linear structural models, involving two stages of identifying modal parameters and updating model parameters, selecting the sensor configuration that maximizes the expected information gain.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Optimal sensor placement for parameter estimation and virtual sensing of strains on an offshore wind turbine considering sensor installation cost

Azin Mehrjoo et al.

Summary: This paper proposes an optimal sensor placement (OSP) framework using information theory, which combines a Bayesian OSP method with modal expansion to minimize information entropy about quantities of interest (QoI) without knowledge of input excitation. The framework takes into account variations in sensor installation cost and has been numerically evaluated using a realistic model of an offshore wind turbine. The results demonstrate that the OSP framework is an effective tool for decision-makers and can offer valuable insights when considering cost constraints.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Bayesian-based response expansion and uncertainty quantification using sparse measurement sets

Garrett K. Lopp et al.

Summary: This paper presents an indirect approach to estimate a system's full-field dynamic response by utilizing response measurements from sparsely located sensors. The approach relies on Bayesian inference and a system model to estimate the response and quantify the uncertainty. By casting the problem in the frequency domain and utilizing modal frequency response functions as weighting scheme, an accurate expansion can be achieved.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

A novel two-step strategy of non-probabilistic multi-objective optimization for load-dependent sensor placement with interval uncertainties

Chen Yang et al.

Summary: Conventional optimal sensor placement methods do not consider actual load cases or structural responses, leading to errors and failures. Therefore, this paper proposes a novel uncertain load-dependent sensor placement method based on non-probabilistic theory, which uses a two-step strategy to select optimal displacement sensor configurations and constitutes a novel interval time series model based on the ratio of reduced and full intervals.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Civil

Bayesian model updating of a twin-tower masonry structure through subset simulation optimization using ambient vibration data

Pei Liu et al.

Summary: A Bayesian model updating method utilizing ambient vibration data to improve efficiency and avoid local optimums is proposed. The method employs Bayesian fast Fourier transform to extract modal parameters for weighting factors, and uses a subset simulation optimization algorithm to find global optimal solutions. Validation on numerical and real-world structures shows improved accuracy in parameter estimations, demonstrating the effectiveness of the proposed method.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A multi-objective genetic algorithm strategy for robust optimal sensor placement

Marco Civera et al.

Summary: This study introduces a new approach based on multi-objective optimization and genetic algorithms for a sensor configuration strategy driven by damage scenarios. The aim is to enhance the robustness of sensor placement for damage detection after potential catastrophic events. The strategy is tested on the bell tower of the Santa Maria and San Giovenale Cathedral in Fossano, Italy, and compared to other classic strategies and a standard GA approach with a single objective function.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

An adaptive sensor placement algorithm for structural health monitoring based on multi-objective iterative optimization using weight factor updating

Chen Yang

Summary: A new sensor placement algorithm based on an iterative updating process is proposed in this study, combining different optimal sensor placement methods using adaptive weight factors and solved by a genetic algorithm.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Full-field strain estimation of subsystems within time-varying and nonlinear systems using modal expansion

Marius Tarpo et al.

Summary: Virtual sensing technique - modal expansion, is proven applicable for stress/strain estimation of subsystems within time-varying and nonlinear systems with general viscous damping. This technique uses mode shapes of the subsystem to expand the response and has been validated both numerically and experimentally.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Chemistry, Analytical

Optimal Sensor Placement for Reliable Virtual Sensing Using Modal Expansion and Information Theory

Tulay Ercan et al.

Summary: A framework for optimal sensor placement for virtual sensing is proposed based on modal expansion technique and information theory. The framework maximizes a utility function to reduce uncertainty in predicted quantities of interest at virtual sensing locations, considering uncertainties in structural model and modeling error parameters. The Gaussian nature of the response is utilized to derive analytical expressions for the utility function, highlighting the importance of robustness to errors and uncertainties.

SENSORS (2021)

Add to Collection

Proceedings Paper Automation & Control Systems

NSGA-II vs NSGA-III for the Sustainable Multi-Objective Process Plan Generation in a Reconfigurable Manufacturing Environment

I Khettabi et al.

Summary: This paper investigates a multi-objective problem of a sustainable reconfigurable manufacturing system (S-RMS) oriented towards the environment, presenting a non-linear multi-objective integer program and adapted versions of the non-dominated sorting genetic algorithm. Experimental results are provided to illustrate and analyze the comparisons between the two meta-heuristics.

IFAC PAPERSONLINE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Strategy for sensor number determination and placement optimization with incomplete information based on interval possibility model and clustering avoidance distribution index

Chen Yang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

Add to Collection

Article Acoustics

Study on solving the ill-posed problem of force load reconstruction

Xiaotong Chang et al.

JOURNAL OF SOUND AND VIBRATION (2019)

Add to Collection

Article Acoustics

Conditional information entropy based sensor placement method considering separated model error and measurement noise

Xue-Yang Pei et al.

JOURNAL OF SOUND AND VIBRATION (2019)

Add to Collection

Article Engineering, Mechanical

Bayesian virtual sensing in structural

J. Kullaa

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Multidisciplinary

BAYESIAN OPTIMAL EXPERIMENTAL DESIGN INVOLVING MULTIPLE SETUPS FOR DYNAMIC STRUCTURAL TESTING

Sahil Bansal

INTERNATIONAL JOURNAL FOR UNCERTAINTY QUANTIFICATION (2019)

Add to Collection

Article Automation & Control Systems

A Modal Expansion Method for Displacement and Strain Field Reconstruction of a Thin-Wall Component During Machining

Man Yu et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2018)

Add to Collection

Article Engineering, Marine

Optimal sensor placement and assessment for modal identification

Kang Liu et al.

OCEAN ENGINEERING (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Sensor placement optimization applied to laminated composite plates under vibration

Guilherme Ferreira Gomes et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)

Add to Collection

Article Engineering, Civil

Structural Health Monitoring Sensor Network Optimization through Bayesian Experimental Design

Giovanni Capellari et al.

ASCE-ASME JOURNAL OF RISK AND UNCERTAINTY IN ENGINEERING SYSTEMS PART A-CIVIL ENGINEERING (2018)

Add to Collection

Article Acoustics

Influence of model errors in optimal sensor placement

Loris Vincenzi et al.

JOURNAL OF SOUND AND VIBRATION (2017)

Add to Collection

Article Engineering, Aerospace

Optimal sensor placement for deployable antenna module health monitoring in SSPS using genetic algorithm

Chen Yang et al.

ACTA ASTRONAUTICA (2017)

Add to Collection

Article Engineering, Mechanical

Robust optimal sensor placement for operational modal analysis based on maximum expected utility

Binbin Li et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Add to Collection

Article Engineering, Multidisciplinary

A Laplace method for under-determined Bayesian optimal experimental designs

Quan Long et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

Add to Collection

Article Acoustics

Extracting full-field dynamic strain on a wind turbine rotor subjected to arbitrary excitations using 3D point tracking and a modal expansion technique

Javad Baqersad et al.

JOURNAL OF SOUND AND VIBRATION (2015)

Add to Collection

Article Mechanics

Real-time displacement monitoring of a composite stiffened panel subjected to mechanical and thermal loads

Priscilla Cerracchio et al.

MECCANICA (2015)

Add to Collection

Article Engineering, Civil

Development of a practical algorithm for Bayesian model updating of a coupled slab system utilizing field test data

H. F. Lam et al.

ENGINEERING STRUCTURES (2014)

Add to Collection

Article Computer Science, Artificial Intelligence

An Evolutionary Many-Objective Optimization Algorithm Using Reference-Point-Based Nondominated Sorting Approach, Part I: Solving Problems With Box Constraints

Kalyanmoy Deb et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2014)

Add to Collection

Article Engineering, Aerospace

Strain-Based Deformation Shape-Estimation Algorithm for Control and Monitoring Applications

Armen Derkevorkian et al.

AIAA JOURNAL (2013)

Add to Collection

Article Engineering, Multidisciplinary

Fast estimation of expected information gains for Bayesian experimental designs based on Laplace approximations

Quan Long et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)

Add to Collection

Article Engineering, Mechanical

Load dependent sensor placement method: Theory and experimental validation

Dong-Sheng Li et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Add to Collection

Article Engineering, Mechanical

The effect of prediction error correlation on optimal sensor placement in structural dynamics

Costas Papadimitriou et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Add to Collection

Article Acoustics

Optimal sensor placement methodology for parametric identification of structural systems

C Papadimitriou

JOURNAL OF SOUND AND VIBRATION (2004)

Add to Collection

Article Statistics & Probability

Estimating expected information gains for experimental designs with application to the random fatigue-limit model

KJ Ryan

JOURNAL OF COMPUTATIONAL AND GRAPHICAL STATISTICS (2003)

Add to Collection

Article Computer Science, Artificial Intelligence

A fast and elitist multiobjective genetic algorithm: NSGA-II

K Deb et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.