4.7 Review

Rotating machinery fault-induced vibration signal modulation effects: A review with mechanisms, extraction methods and applications for diagnosis

Related references

Note: Only part of the references are listed.
Article Engineering, Mechanical

A phenomenological model of vibration signals of epicyclic gearboxes under meshing impact excitations

Zongyao Liu et al.

Summary: This paper investigates the formation mechanism of modulation sidebands in epicyclic gearboxes and proposes a phenomenological model considering meshing impacts. The established model is validated with experimental data, showing its usefulness in condition monitoring and fault diagnosis of epicyclic gearboxes.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Article Engineering, Mechanical

Time-frequency ridge estimation: An effective tool for gear and bearing fault diagnosis at time-varying speeds

Yifan Li et al.

Summary: This paper proposes a novel time-frequency ridge estimation (TFRE) method, which integrates a new cost kernel function and an adaptive search region detection principle to improve the performance of ridge estimation. Experimental results demonstrate that the proposed TFRE outperforms state-of-the-art methods in ridge estimation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Article Engineering, Mechanical

The effect of time-varying operating condition on the crack induced impulses and its application to gearbox tooth crack diagnosis

Xingkai Yang et al.

Summary: This paper investigates the impact of Time-Varying Operating Conditions (TVOC) on vibration signals of gearboxes with tooth cracks. A method is proposed to evaluate the gear tooth mesh stiffness considering tooth crack severity progression and operating condition variations. Through signal analysis, Crack Induced Impulses (CII) are extracted and their AM effect dependence on TVOC is identified. A novel Condition Indicator (CI) is proposed to track tooth crack severity progression under TVOC, which is demonstrated to be effective using both simulated and experimental gearbox vibration signals.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Article Engineering, Mechanical

Analysis of spur gearbox dynamics considering tooth lubrication and tooth crack severity progression

Xingkai Yang et al.

Summary: A novel tribo-dynamic model of a spur gearbox is proposed, considering both tooth lubrication and tooth crack. The effects of tooth lubrication and tooth crack severity progression on combined stiffness, combined damping, and gearbox vibration responses are studied. Results show that considering tooth lubrication leads to a backward shift of the frequency components induced by tooth crack, and the consideration of tooth lubrication overall reflects tooth crack signatures better.

TRIBOLOGY INTERNATIONAL (2023)

Article Automation & Control Systems

Parameterized Domain Mapping for Order Tracking of Rotating Machinery

Tianqi Li et al.

Summary: In this article, a pseudo-time domain mapping method based on the mechanism of rotating machinery is proposed to eliminate frequency distortion under nonstationary conditions. By optimizing the parameter set, an appropriate pseudo-time domain is constructed to improve the continuity of the spectrum. Numerical and experimental verification shows that this method has good antinoise performance and can deal with complex and close-spaced frequencies.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2023)

Article Engineering, Aerospace

Synchronous chirp mode extraction: A promising tool for fault diagnosis of rolling element bearings under varying speed conditions

Xingxing Jiang et al.

Summary: This study proposes a synchronous chirp mode extraction (SCME) - based method for fault diagnosis of rolling element bearings (REBs) under varying speed conditions. The method estimates the shaft rotational frequency (SRF) from the low-frequency band of the vibration signal and extracts synchronous modes from the envelope waveform of the signal using a cycle-one-step estimation frame. The health conditions of the REBs are evaluated by detecting the exhibited features in the synchronous mode spectrum (SMS). Simulations and experiments demonstrate the effectiveness of the proposed method for fault diagnosis of REBs.

CHINESE JOURNAL OF AERONAUTICS (2022)

Article Engineering, Mechanical

Physics-Informed LSTM hyperparameters selection for gearbox fault detection

Yuejian Chen et al.

Summary: In this study, a physics-informed hyperparameters selection strategy is proposed for LSTM modeling and fault detection of gearboxes. The results demonstrate that this strategy can better detect gearbox faults.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Phenomenological vibration models of planetary gearboxes for gear local fault diagnosis

Yanyan Nie et al.

Summary: Planetary gearboxes are prone to gear local faults due to their difficult working environment, which can lead to significant losses and catastrophic events. This study proposes an improved phenomenological vibration model and calculates the relative phases between gear pairs to establish vibration models with/without local faults in order to diagnose these faults. Spectral structures and LFCFs are derived for diagnosis purposes, and simulation and experimental studies demonstrate the effectiveness of the proposed models.

MECHANISM AND MACHINE THEORY (2022)

Article Engineering, Mechanical

Central frequency mode decomposition and its applications to the fault diagnosis of rotating machines

Xingxing Jiang et al.

Summary: This study explores the challenges in variational mode decomposition (VMD) and its variants for the fault diagnosis of rotating machines. Based on the decomposing characteristics of two sub-models in VMD, a central frequency mode decomposition (CFMD) method is proposed. The CFMD method consists of three parts and achieves effective and adaptive signal decomposition. Numerical simulation and experimental cases validate the effectiveness and superiority of the CFMD method in the fault diagnosis of rotating machines.

MECHANISM AND MACHINE THEORY (2022)

Article Engineering, Electrical & Electronic

Parameterized Resampling Time-Frequency Transform

Tianqi Li et al.

Summary: This paper proposes a method called parameterized resampling time-frequency transform (PRTF transform) to analyze signals with time-varying instantaneous frequencies (IFs). By constructing resampling operators to eliminate IF variations and relocate IF positions, the method improves the energy concentration of multiple components in the time-frequency representation. Numerical simulations and practical experiments demonstrate the effectiveness of the proposed method in improving the time-frequency resolution of non-stationary multi-component signals.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Fault mechanism and dynamic modeling of planetary gear with gear wear

Zhixian Shen et al.

Summary: This paper analyzes the fault mechanism and dynamic characteristics of gear wear, proposing a purely torsional dynamic model of planetary gear with gear wear. The study provides a basis for vibration-based fault diagnosis and monitoring of gear wear, showing how gear wear can affect planetary gear dynamic parameters.

MECHANISM AND MACHINE THEORY (2021)

Article Engineering, Mechanical

Sinusoidal FM patterns of fault-related vibration signals for planetary gearbox fault detection under non-stationary conditions

Peng Zhou et al.

Summary: This study proposes a novel method for detecting faults in planetary gearboxes by extracting amplitude modulation and frequency modulation modes from vibration signals, avoiding complex sideband analysis. The method identifies the oscillating nature of the FM mode through signal decomposition and optimization schemes and verifies a potential scaling relationship between load strength and the oscillating coefficient of the FM mode under different load conditions.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

A time series model-based method for gear tooth crack detection and severity assessment under random speed variation

Yuejian Chen et al.

Summary: This paper presents a time series model-based method for gear tooth crack detection and severity assessment under random speed variation. The proposed method outperforms the novelty diagnostic method and SVM-based method in accuracy, correctly assessing 93.8% of tooth crack severity states.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Electrical & Electronic

Time-Varying Envelope Filtering for Exhibiting Space Bearing Cage Fault Features

Sha Wei et al.

Summary: Rolling bearing cage failure can lead to machine breakdown, with fault diagnosis of space bearing cage being a challenging topic. The proposed TVEF method accurately extracts the fault features of space bearing cage, demonstrating potential and effectiveness in experiments.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Article Engineering, Electrical & Electronic

Weighted Cyclic Harmonic-to-Noise Ratio for Rolling Element Bearing Fault Diagnosis

Zhenling Mo et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Article Engineering, Mechanical

A phenomenological model for investigating unequal planet load sharing in epicyclic gearboxes

Zongyao Liu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Acoustics

Cyclostationary modeling for local fault diagnosis of planetary gear vibration signals

Ruo-Bin Sun et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Article Engineering, Electrical & Electronic

A Novel Rolling Bearing Fault Diagnosis Method Based on Empirical Wavelet Transform and Spectral Trend

Yonggang Xu et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Article Engineering, Mechanical

The relationship between fault-induced impulses and harmonic-cluster with applications to rotating machinery fault diagnosis

Peng Zhou et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Electrical & Electronic

Warped Variational Mode Decomposition With Application to Vibration Signals of Varying-Speed Rotating Machineries

Shiqian Chen et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2019)

Article Engineering, Mechanical

Adaptive chirp mode pursuit: Algorithm and applications

Shiqian Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Mechanical

Experimental study on the intrawave frequency modulation characteristic of rotor rub and crack fault

Aijun Hu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Review Engineering, Mechanical

Parameterised time-frequency analysis methods and their engineering applications: A review of recent advances

Yang Yang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Mechanical

Study on intra-wave frequency modulation phenomenon in detection of rub-impact fault

Peng Zhou et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Automation & Control Systems

Nonstationary Signal Denoising Using an Envelope-Tracking Filter

Shiqian Chen et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2018)

Article Automation & Control Systems

A New Family of Model-Based Impulsive Wavelets and Their Sparse Representation for Rolling Bearing Fault Diagnosis

Yi Qin

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Article Engineering, Mechanical

Weak fault feature extraction of rolling bearings based on globally optimized sparse coding and approximate SVD

Fatao Hou et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Engineering, Mechanical

Sparsity guided empirical wavelet transform for fault diagnosis of rolling element bearings

Dong Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Automation & Control Systems

Synchroextracting Transform

Gang Yu et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

On Demodulation, Ridge Detection, and Synchrosqueezing for Multicomponent Signals

Sylvain Meignen et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2017)

Article Engineering, Electrical & Electronic

Nonlinear Chirp Mode Decomposition: A Variational Method

Shiqian Chen et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2017)

Article Engineering, Electrical & Electronic

High-Order Synchrosqueezing Transform for Multicomponent Signals Analysis-With an Application to Gravitational-Wave Signal

Duong-Hung Pham et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2017)

Article Engineering, Multidisciplinary

A hybrid approach to fault diagnosis of roller bearings under variable speed conditions

Yanxue Wang et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Mechanical

Fault detection method for railway wheel flat using an adaptive multiscale morphological filter

Yifan Li et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Mechanical

Two methods for modeling vibrations of planetary gearboxes including faults: Comparison and validation

J. Parra et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Mechanical

Research on variational mode decomposition in rolling bearings fault diagnosis of the multistage centrifugal pump

Ming Zhang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Mechanical

Independence-oriented VMD to identify fault feature for wheel set bearing fault diagnosis of high speed locomotive

Zipeng Li et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Electrical & Electronic

Intrinsic chirp component decomposition by using Fourier Series representation

Shiqian Chen et al.

SIGNAL PROCESSING (2017)

Article Engineering, Electrical & Electronic

A time varying filter approach for empirical mode decomposition

Heng Li et al.

SIGNAL PROCESSING (2017)

Article Engineering, Mechanical

Spur Gear Tooth Pitting Propagation Assessment Using Model-based Analysis

Xi-Hui Liang et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)

Article Mathematics, Applied

Adaptive local iterative filtering for signal decomposition and instantaneous frequency analysis

Antonio Cicone et al.

APPLIED AND COMPUTATIONAL HARMONIC ANALYSIS (2016)

Article Computer Science, Artificial Intelligence

A variational mode decompoisition approach for analysis and forecasting of economic and financial time series

Salim Lahmiri

EXPERT SYSTEMS WITH APPLICATIONS (2016)

Article Geochemistry & Geophysics

Synchrosqueezing S-Transform and Its Application in Seismic Spectral Decomposition

Zhong-lai Huang et al.

IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING (2016)

Article Engineering, Electrical & Electronic

Time-Varying Frequency-Modulated Component Extraction Based on Parameterized Demodulation and Singular Value Decomposition

Shiqian Chen et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2016)

Article Health Care Sciences & Services

Detection of Shockable Ventricular Arrhythmia using Variational Mode Decomposition

R. K. Tripathy et al.

JOURNAL OF MEDICAL SYSTEMS (2016)

Article Engineering, Multidisciplinary

Wheel-bearing fault diagnosis of trains using empirical wavelet transform

Hongrui Cao et al.

MEASUREMENT (2016)

Article Engineering, Mechanical

The infogram: Entropic evidence of the signature of repetitive transients

Jerome Antoni

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Article Multidisciplinary Sciences

ConceFT: concentration of frequency and time via a multitapered synchrosqueezed transform

Ingrid Daubechies et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)

Article Engineering, Electrical & Electronic

A new music-empirical wavelet transform methodology for time-frequency analysis of noisy nonlinear and non-stationary signals

Juan P. Amezquita-Sanchez et al.

DIGITAL SIGNAL PROCESSING (2015)

Article Engineering, Electrical & Electronic

Component Extraction for Non-Stationary Multi-Component Signal Using Parameterized De-chirping and Band-Pass Filter

Yang Yang et al.

IEEE SIGNAL PROCESSING LETTERS (2015)

Article Automation & Control Systems

Sparse Feature Identification Based on Union of Redundant Dictionary for Wind Turbine Gearbox Fault Diagnosis

Zhaohui Du et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

Article Engineering, Electrical & Electronic

Second-Order Synchrosqueezing Transform or Invertible Reassignment? Towards Ideal Time-Frequency Representations

Thomas Oberlin et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2015)

Article Engineering, Mechanical

Research on variational mode decomposition and its application in detecting rub-impact fault of the rotor system

Yanxue Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)

Article Mathematics, Applied

Using synchrosqueezing transform to discover breathing dynamics from ECG signals

Hau-Tieng Wu et al.

APPLIED AND COMPUTATIONAL HARMONIC ANALYSIS (2014)

Article Geochemistry & Geophysics

Time-Frequency Analysis of Seismic Data Using Synchrosqueezing Transform

Ping Wang et al.

IEEE GEOSCIENCE AND REMOTE SENSING LETTERS (2014)

Article Engineering, Electrical & Electronic

Application of Parameterized Time-Frequency Analysis on Multicomponent Frequency Modulated Signals

Yang Yang et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2014)

Article Engineering, Electrical & Electronic

Matching Demodulation Transform With Application to Feature Extraction of Rotor Rub-Impact Fault

Shibin Wang et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2014)

Article Engineering, Electrical & Electronic

General Parameterized Time-Frequency Transform

Y. Yang et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2014)

Article Engineering, Electrical & Electronic

Variational Mode Decomposition

Konstantin Dragomiretskiy et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2014)

Article Engineering, Electrical & Electronic

Matching Demodulation Transform and SynchroSqueezing in Time-Frequency Analysis

Shibin Wang et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2014)

Article Acoustics

Matching pursuit of an adaptive impulse dictionary for bearing fault diagnosis

Lingli Cui et al.

JOURNAL OF SOUND AND VIBRATION (2014)

Article Engineering, Mechanical

The relationship between kurtosis- and envelope-based indexes for the diagnostic of rolling element bearings

P. Borghesani et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2014)

Article Engineering, Mechanical

An explanation of frequency features enabling detection of faults in equally spaced planetary gearbox

Liu Hong et al.

MECHANISM AND MACHINE THEORY (2014)

Article Engineering, Electrical & Electronic

Compressed sensing based on dictionary learning for extracting impulse components

Xuefeng Chen et al.

SIGNAL PROCESSING (2014)

Article Engineering, Electrical & Electronic

Time-Frequency Reassignment and Synchrosqueezing

Francois Auger et al.

IEEE SIGNAL PROCESSING MAGAZINE (2013)

Article Engineering, Electrical & Electronic

Empirical Wavelet Transform

Jerome Gilles

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2013)

Article Acoustics

A finite element-based algorithm for rubbing induced vibration prediction in rotors

Mehdi Behzad et al.

JOURNAL OF SOUND AND VIBRATION (2013)

Article Engineering, Mechanical

Sparsity-enabled signal decomposition using tunable Q-factor wavelet transform for fault feature extraction of gearbox

Gaigai Cai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Article Engineering, Mechanical

Joint amplitude and frequency demodulation analysis based on local mean decomposition for fault diagnosis of planetary gearboxes

Zhipeng Feng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Review Engineering, Mechanical

An improved EEMD with multiwavelet packet for rotating machinery multi-fault diagnosis

Hongkai Jiang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Review Engineering, Mechanical

Recent advances in time-frequency analysis methods for machinery fault diagnosis: A review with application examples

Zhipeng Feng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Review Engineering, Mechanical

A review on empirical mode decomposition in fault diagnosis of rotating machinery

Yaguo Lei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Article Engineering, Electrical & Electronic

On Phase-Magnitude Relationships in the Short-Time Fourier Transform

Francois Auger et al.

IEEE SIGNAL PROCESSING LETTERS (2012)

Article Automation & Control Systems

Spline-Kernelled Chirplet Transform for the Analysis of Signals With Time-Varying Frequency and Its Application

Y. Yang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2012)

Article Mathematics, Applied

Iterative Filtering Decomposition Based on Local Spectral Evolution Kernel

Yang Wang et al.

JOURNAL OF SCIENTIFIC COMPUTING (2012)

Article Acoustics

Vibration signal models for fault diagnosis of planetary gearboxes

Zhipeng Feng et al.

JOURNAL OF SOUND AND VIBRATION (2012)

Article Engineering, Mechanical

Time-frequency signal analysis for gearbox fault diagnosis using a generalized synchrosqueezing transform

Chuan Li et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Article Engineering, Mechanical

Characterize highly oscillating frequency modulation using generalized Warblet transform

Y. Yang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Article Engineering, Mechanical

An order tracking technique for the gear fault diagnosis using local mean decomposition method

Junsheng Cheng et al.

MECHANISM AND MACHINE THEORY (2012)

Article Acoustics

Effect of Planetary Gear Carrier-Plate Cracks on Vibration Spectrum

Romano Patrick et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2012)

Article Mathematics, Applied

Synchrosqueezed wavelet transforms: An empirical mode decomposition-like tool

Ingrid Daubechies et al.

APPLIED AND COMPUTATIONAL HARMONIC ANALYSIS (2011)

Article Engineering, Electrical & Electronic

Polynomial Chirplet Transform With Application to Instantaneous Frequency Estimation

Z. K. Peng et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2011)

Article Engineering, Electrical & Electronic

Raised cosine filter-based empirical mode decomposition

A. Roy et al.

IET SIGNAL PROCESSING (2011)

Article Engineering, Mechanical

An adaptive SK technique and its application for fault detection of rolling element bearings

Yanxue Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

Article Engineering, Mechanical

Sparse signal decomposition method based on multi-scale chirplet and its application to the fault diagnosis of gearboxes

Fuqiang Peng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

Review Engineering, Mechanical

Rolling element bearing diagnostics-A tutorial

Robert B. Randall et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

Article Engineering, Mechanical

A novel method for the optimal band selection for vibration signal demodulation and comparison with the Kurtogram

Tomasz Barszcz et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

Article Mathematics, Applied

SYNCHROSQUEEZING-BASED RECOVERY OF INSTANTANEOUS FREQUENCY FROM NONUNIFORM SAMPLES

Gaurav Thakur et al.

SIAM JOURNAL ON MATHEMATICAL ANALYSIS (2011)

Review Engineering, Electrical & Electronic

Local polynomial Fourier transform: A review on recent developments and applications

Xiumei Li et al.

SIGNAL PROCESSING (2011)

Article Engineering, Electrical & Electronic

Fractional Fourier transform as a signal processing tool: An overview of recent developments

Ervin Sejdic et al.

SIGNAL PROCESSING (2011)

Article Acoustics

A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors

Murat Inalpolat et al.

JOURNAL OF SOUND AND VIBRATION (2010)

Article Engineering, Mechanical

The dynamic behavior of a rotor system with a slant crack on the shaft

Yanli Lin et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2010)

Article Engineering, Electrical & Electronic

Attenuation Analysis of Lamb Waves Using the Chirplet Transform

Florian Kerber et al.

EURASIP JOURNAL ON ADVANCES IN SIGNAL PROCESSING (2010)

Article Acoustics

Coupled bending-torsional vibration analysis of rotor with rub and crack

Tejas H. Patel et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Article Acoustics

A theoretical and experimental investigation of modulation sidebands of planetary gear sets

M. Inalpolat et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Article Engineering, Multidisciplinary

A demodulation method based on improved local mean decomposition and its application in rub-impact fault diagnosis

Yanxue Wang et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2009)

Article Engineering, Multidisciplinary

Fault diagnosis of rotating machinery using an improved HHT based on EEMD and sensitive IMFs

Yaguo Lei et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2009)

Article Engineering, Mechanical

Analytical basics of the EMD: Two harmonics decomposition

Michael Feldman

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2009)

Article Engineering, Mechanical

Local rub-impact fault diagnosis of the rotor systems based on EMD

Junsheng Cheng et al.

MECHANISM AND MACHINE THEORY (2009)

Article Mathematics, Interdisciplinary Applications

ITERATIVE FILTERING AS AN ALTERNATIVE ALGORITHM FOR EMPIRICAL MODE DECOMPOSITION

Luan Lin et al.

ADVANCES IN DATA SCIENCE AND ADAPTIVE ANALYSIS (2009)

Article Mathematics, Interdisciplinary Applications

ENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD

Zhaohua Wu et al.

ADVANCES IN DATA SCIENCE AND ADAPTIVE ANALYSIS (2009)

Article Engineering, Electrical & Electronic

One or two frequencies? The empirical mode decomposition answers

Gabriel Rilling et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2008)

Article Engineering, Mechanical

Vibration analysis of a cracked rotor using Hilbert-Huang transform

D. Guo et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)

Article Engineering, Mechanical

Application of the EMD method in the vibration analysis of ball bearings

Qiuhua Du et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)

Article Acoustics

Dynamics of a Jeffcott rotor with slant crack

Ashish K. Darpe

JOURNAL OF SOUND AND VIBRATION (2007)

Article Acoustics

Application of atomic decomposition to gear damage detection

Zhipeng Feng et al.

JOURNAL OF SOUND AND VIBRATION (2007)

Article Acoustics

Single-mixture audio source separation by subspace decomposition of Hilbert spectrum

Md. Khademul Islam Molla et al.

IEEE TRANSACTIONS ON AUDIO SPEECH AND LANGUAGE PROCESSING (2007)

Article Acoustics

Multicomponent AM-FM representations: An asymptotically exact approach

Francesco Gianfelici et al.

IEEE TRANSACTIONS ON AUDIO SPEECH AND LANGUAGE PROCESSING (2007)

Article Multidisciplinary Sciences

Intrinsic time-scale decomposition: time-frequency-energy analysis and real-time filtering of non-stationary signals

Mark G. Frei et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2007)

Article Engineering, Mechanical

Fast computation of the kurtogram for the detection of transient faults

Jerome Antoni

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)

Article Computer Science, Artificial Intelligence

Image denoising via sparse and redundant representations over learned dictionaries

Michael Elad et al.

IEEE TRANSACTIONS ON IMAGE PROCESSING (2006)

Article Engineering, Electrical & Electronic

K-SVD: An algorithm for designing overcomplete dictionaries for sparse representation

Michal Aharon et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2006)

Article Acoustics

Time-varying vibration decomposition and analysis based on the Hilbert transform

Michael Feldman

JOURNAL OF SOUND AND VIBRATION (2006)

Article Engineering, Mechanical

Further exploration of Vold-Kalman-filtering order tracking with shaft-speed information - II: Engineering applications

MC Pan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2006)

Article Acoustics

Model-based analysis of dispersion curves using chirplets

H Kuttig et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2006)

Article Engineering, Mechanical

Vibration response of rolling element bearings in a rotor bearing system to a local defect under radial load

A Choudhury et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2006)

Article Mathematics, Applied

A B-spline approach for empirical mode decompositions

QH Chen et al.

ADVANCES IN COMPUTATIONAL MATHEMATICS (2006)

Article Multidisciplinary Sciences

The local mean decomposition and its application to EEG perception data

JS Smith

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2005)

Article Engineering, Biomedical

Application of the empirical mode decomposition to the analysis of esophageal manometric data in gastroesophageal reflux disease

HL Liang et al.

IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2005)

Article Multidisciplinary Sciences

A generalized demodulation approach to time-frequency projections for multicomponent signals

S Olhede et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2005)

Article Engineering, Electrical & Electronic

Sparse solutions to linear inverse problems with multiple measurement vectors

SF Cotter et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2005)

Article Engineering, Mechanical

Fault diagnosis of rolling element bearings using basis pursuit

HY Yang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2005)

Article Engineering, Mechanical

Detection of the rubbing-caused impacts for rotor-stator fault diagnosis using reassigned scalogram

ZK Peng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2005)

Article Engineering, Mechanical

Mesh phasing relationships in planetary and epicyclic gears

RG Parker et al.

JOURNAL OF MECHANICAL DESIGN (2004)

Article Engineering, Electrical & Electronic

Empirical mode decomposition as a filter bank

P Flandrin et al.

IEEE SIGNAL PROCESSING LETTERS (2004)

Article Mathematics, Applied

An iterative thresholding algorithm for linear inverse problems with a sparsity constraint

I Daubechies et al.

COMMUNICATIONS ON PURE AND APPLIED MATHEMATICS (2004)

Article Acoustics

A stochastic model for simulation and diagnostics of rolling element bearings with localized faults

J Antoni et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2003)

Article Engineering, Electrical & Electronic

Short-time Fourier transform: Two fundamental properties and an optimal implementation

L Durak et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2003)

Article Acoustics

Vibration signal analysis and feature extraction based on reassigned wavelet scalogram

Z Peng et al.

JOURNAL OF SOUND AND VIBRATION (2002)

Article Materials Science, Characterization & Testing

Bearing failure detection using matching pursuit

B Liu et al.

NDT & E INTERNATIONAL (2002)

Article Acoustics

Differential diagnosis of gear and bearing faults

J Antoni et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2002)

Article Acoustics

Fourier series analysis of epicyclic gearbox vibration

J McNames

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2002)

Article Engineering, Mechanical

Early detection of gear tooth cracking using the resonance demodulation technique

WY Wang

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2001)

Article Mathematics, Applied

Atomic decomposition by basis pursuit

SSB Chen et al.

SIAM REVIEW (2001)

Article Engineering, Electrical & Electronic

Multi-frame compression: theory and design

K Engan et al.

SIGNAL PROCESSING (2000)

Article Computer Science, Artificial Intelligence

Learning overcomplete representations

MS Lewicki et al.

NEURAL COMPUTATION (2000)