Related references
Note: Only part of the references are listed.
Article
Materials Science, Characterization & Testing
Mustafa Okan Ture et al.
Summary: This paper designs and manufactures tensile test specimens with different hexagonal lattice structures using additive manufacturing. The mechanical behaviors of these specimens are obtained using a tensile testing machine and analyzed by finite element program. The influence of lattice shape and infill density on mechanical behavior is investigated, and the simulation results are validated through comparison with finite element analysis. The main objective of this paper is to study the tensile test properties of PLA test specimens with different hexagonal-shaped lattice structures and verify their finite element model. It is concluded that increasing hexagonal lattice size enhances ductility up to a certain degree, and the elastic modulus of specimens with 15% and 100% infill density is nearly the same in the lattice region.
Article
Engineering, Mechanical
Janos Plocher et al.
Summary: This study provides a comprehensive investigation into infill patterns in fibre-reinforced additive manufacturing, facilitating design and processing choices. The results suggest that tailoring print paths according to requirements instead of using fixed patterns can achieve the highest stiffness and strength.
RAPID PROTOTYPING JOURNAL
(2022)
Article
Materials Science, Characterization & Testing
Bingfei Liu et al.
Summary: 4D printing, a new interdisciplinary research field combining advanced manufacturing, materials science, and mechanics, has attracted academic interest in recent years. In the study of additive manufacturing of Shape Memory Polymer (SMP) structures, tests were conducted to determine the thermodynamic properties of SMP and examine the effect of different parameters on the mechanical properties of SMP samples. The results showed that adjusting the structural parameters can effectively improve the tensile strength of SMP samples.
Article
Materials Science, Multidisciplinary
Gokhan Aydin et al.
Summary: Infill density and pattern have significant effects on material performance and metamaterial response, with rectangular grid being a widely used infill pattern.
MATHEMATICS AND MECHANICS OF SOLIDS
(2022)
Article
Chemistry, Analytical
Yujing Qiao et al.
Summary: This paper proposes a new filling algorithm - the variable density filling algorithm, which can improve the strength of the part by performing concave-polygon-convex decomposition on the filling area and using the Poisson disk sampling algorithm to generate the filling point set.
Article
Materials Science, Composites
Yajun Liu et al.
Summary: This study investigates the flexural and impact performance of 3D woven textile-reinforced composites using different structures and binder yarns. The results show that the woven structure and yarn ratio have significant effects on the mechanical properties, and the introduction of aramid binder yarn can improve impact resistance but decrease flexural performance.
POLYMER COMPOSITES
(2022)
Article
Engineering, Multidisciplinary
Jaroslaw Zubrzycki et al.
Summary: The manufacturing of machine parts with additive methods is significant in modern industry. The development of 3D printing technology has made it possible to produce parts quickly and inexpensively. However, different printing parameters can result in variations in mechanical properties, particularly strength. This paper presents a study on the impact of 3D printing parameters on the strength of manufactured parts.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL
(2022)
Article
Engineering, Manufacturing
Rumbidzai Muvunzi et al.
Summary: This paper presents an approach for companies in the rail industry to select additive manufacturing (AM) technologies, which includes identifying suitable parts, comparing applicable technologies, and selecting the most suitable one. The study also provides insights into the application of AM in the rail industry.
INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING
(2022)
Article
Chemistry, Multidisciplinary
Xin Pan et al.
Summary: This study investigated the coupling effect of multiple variables on fracture parameters and proposed a three-point bending specimen with an inclined crack for mixed-mode fracture research. The fracture parameters were obtained through experiments and finite element analysis, showing that the generalized maximum tangential strain energy density factor criterion considering T-stress can better predict the mixed-mode fracture toughness.
APPLIED SCIENCES-BASEL
(2021)
Article
Chemistry, Multidisciplinary
Juan Leon-Becerra et al.
Summary: This study presents the mechanical characterization of three commonly used infill patterns in AM, compares experimental results with numerical and analytical models, and proposes simplified models for predicting the compressive and tensile response of AM PLA structures.
Article
Polymer Science
Daniel Moreno Nieto et al.
Summary: This study focuses on the degradation and water absorption behaviors of two different additively manufactured polymers, PETG and PLA, printed using fused filament fabrication processes. Results show that the absorption process stabilizes after a few weeks for both materials, with degradation more pronounced in the PLA material due to its organic nature.
Article
Polymer Science
Ming-Hsien Hsueh et al.
Summary: FDM technology is widely used in various industries to manufacture complex geometries and internal structures. The study focused on characterizing the mechanical properties of PLA and PETG materials under different loading conditions, showing that varying printing temperatures and speeds can affect the performance of the materials.
Article
Computer Science, Software Engineering
Samuel Hornus et al.
ACM TRANSACTIONS ON GRAPHICS
(2020)