Related references
Note: Only part of the references are listed.Chaotic marine predators algorithm for global optimization of real-world engineering problems
Sumit Kumar et al.
KNOWLEDGE-BASED SYSTEMS (2023)
A novel hybrid flow direction optimizer-dynamic oppositional based learning algorithm for solving complex constrained mechanical design problems
Betul S. Yildiz et al.
MATERIALS TESTING (2023)
A novel generalized normal distribution optimizer with elite oppositional based learning for optimization of mechanical engineering problems
Pranav Mehta et al.
MATERIALS TESTING (2023)
Additive manufacturing of hexagonal lattice structures: tensile tests and validation
Mustafa Okan Ture et al.
MATERIALS TESTING (2023)
Multi-material additive manufacturing: investigation of the combined use of ABS and PLA in the same structure
Bagdaulyet Yermurat et al.
MATERIALS TESTING (2023)
Comparison of notch fabrication methods on the impact strength of FDM-3D-printed PLA specimens
Meltem Eryildiz
MATERIALS TESTING (2023)
PINN-FORM: A new physics-informed neural network for reliability analysis with partial differential equation
Zeng Meng et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)
Grid-based many-objective optimiser for aircraft conceptual design with multiple aircraft configurations
Pakin Champasak et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2023)
A novel hybrid arithmetic optimization algorithm for solving constrained optimization problems
Betul Sultan Yildiz et al.
KNOWLEDGE-BASED SYSTEMS (2023)
A multi-strategy boosted prairie dog optimization algorithm for global optimization of heat exchangers
Dildar Gurses et al.
MATERIALS TESTING (2023)
Composite disc optimization using hunger games search optimization algorithm
Mehmet Kopar et al.
MATERIALS TESTING (2023)
Cheetah optimization algorithm for optimum design of heat exchangers
Sadiq M. Sait et al.
MATERIALS TESTING (2023)
Application of state-of-the-art multiobjective metaheuristic algorithms in reliability-based design optimization: a comparative study
Zeng Meng et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2023)
Optimization of FDM process parameters for tensile properties of polylactic acid specimens using Taguchi design of experiment method
M. Heidari-Rarani et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)
Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique
Arvind Kottasamy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
A novel chaotic Henry gas solubility optimization algorithm for solving real-world engineering problems
Betul Sultan Yildiz et al.
ENGINEERING WITH COMPUTERS (2022)
Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique
N. Vinoth Babu et al.
MATERIALS TECHNOLOGY (2022)
Enhanced grasshopper optimization algorithm using elite opposition-based learning for solving real-world engineering problems
Betul Sultan Yildiz et al.
ENGINEERING WITH COMPUTERS (2022)
A new chaotic Levy flight distribution optimization algorithm for solving constrained engineering problems
Betul Sultan Yildiz et al.
EXPERT SYSTEMS (2022)
Hunger games search algorithm for global optimization of engineering design problems
Pranav Mehta et al.
MATERIALS TESTING (2022)
Effect of process parameters on mechanical properties of additive manufactured SMP structures based on FDM
Bingfei Liu et al.
MATERIALS TESTING (2022)
Gradient-based optimizer for economic optimization of engineering problems
Pranav Mehta et al.
MATERIALS TESTING (2022)
Manta ray foraging optimization algorithm and hybrid Taguchi salp swarm-Nelder-Mead algorithm for the structural design of engineering components
Ali Riza Yildiz et al.
MATERIALS TESTING (2022)
The Influence of the Gradient Infill of PLA Samples Produced with the FDM Technique on Their Mechanical Properties
Joanna Maszybrocka et al.
MATERIALS (2022)
Effect of Chemical Treatment of Sugar Palm Fibre on Rheological and Thermal Properties of the PLA Composites Filament for FDM 3D Printing
Mohd Hakim Mohd Nasir et al.
MATERIALS (2022)
A Nelder Mead-infused INFO algorithm for optimization of mechanical design problems
Pranav Mehta et al.
MATERIALS TESTING (2022)
African vultures optimization algorithm for optimization of shell and tube heat exchangers
Dildar Gurses et al.
MATERIALS TESTING (2022)
A new hybrid artificial hummingbird-simulated annealing algorithm to solve constrained mechanical engineering problems
Betul Sultan Yildiz et al.
MATERIALS TESTING (2022)
Mechanical properties optimization for PLA, ABS and Nylon
S. L. Rodriguez-Reyna et al.
MATERIALS TODAY COMMUNICATIONS (2022)
A novel chaotic Runge Kutta optimization algorithm for solving constrained engineering problems
Betul Sultan Yildiz et al.
JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2022)
Numerical Simulation and Experimental Study the Effects of Process Parameters on Filament Morphology and Mechanical Properties of FDM 3D Printed PLA/GNPs Nanocomposite
Mingju Lei et al.
POLYMERS (2022)
Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimens
Liviu Marsavina et al.
ENGINEERING FRACTURE MECHANICS (2022)
Quality optimization of FDM-printed (fused deposition modeling) components based on differential scanning calorimetry
Robin Roj et al.
MATERIALS TESTING (2022)
Effects of raster angle in single- and multi-oriented layers for the production of polyetherimide (PEI/ULTEM 1010) parts with fused deposition modelling
Musa Yilmaz et al.
MATERIALS TESTING (2022)
Artificial gorilla troops algorithm for the optimization of a fine plate heat exchanger
Dildar Gurses et al.
MATERIALS TESTING (2022)
Reptile search algorithm and kriging surrogate model for structural design optimization with natural frequency constraints
Betul Sultan Yildiz et al.
MATERIALS TESTING (2022)
Evaluation on effect of printing process parameter through Taguchi approach on mechanical properties of 3D printed PLA specimens using FDM at constant printing temperature
N. Lokesh et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Comparison of metaheuristic optimization algorithms for solving constrained mechanical design optimization problems
Shubham Gupta et al.
EXPERT SYSTEMS WITH APPLICATIONS (2021)
Robust design of a robot gripper mechanism using new hybrid grasshopper optimization algorithm
Betul Sultan Yildiz et al.
EXPERT SYSTEMS (2021)
A Comparative Study of the Mechanical Properties of FDM 3D Prints Made of PLA and Carbon Fiber-Reinforced PLA for Thin-Walled Applications
Jerzy Bochnia et al.
MATERIALS (2021)
Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment
Ali Chalgham et al.
POLYMERS (2021)
Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling
Ming-Hsien Hsueh et al.
POLYMERS (2021)
Comparative investigation of the moth-flame algorithm and whale optimization algorithm for optimal spur gear design
Hammoudi Abderazek et al.
MATERIALS TESTING (2021)
A new Hybrid Taguchi-salp swarm optimization algorithm for the robust design of real-world engineering problems
Ali Riza Yildiz et al.
MATERIALS TESTING (2021)
Conceptual comparison of the ecogeography-based algorithm, equilibrium algorithm, marine predators algorithm and slime mold algorithm for optimal product design
Betul Sultan Yildiz et al.
MATERIALS TESTING (2021)
Comparision of the political optimization algorithm, the Archimedes optimization algorithm and the Levy flight algorithm for design optimization in industry
Betul Sultan Yildiz et al.
MATERIALS TESTING (2021)
Comparison of the arithmetic optimization algorithm, the slime mold optimization algorithm, the marine predators algorithm, the salp swarm algorithm for real-world engineering applications
Dildar Gurses et al.
MATERIALS TESTING (2021)
Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses
Tianyun Yao et al.
COMPOSITES PART B-ENGINEERING (2020)
Optimum design of automobile components using lattice structures for additive manufacturing
Busra Aslan et al.
MATERIALS TESTING (2020)
Sine-cosine optimization algorithm for the conceptual design of automobile components
Betul Sultan Yildiz et al.
MATERIALS TESTING (2020)
Effects of fused deposition modeling process parameters on tensile, dynamic mechanical properties of 3D printed polylactic acid materials
Shuheng Wang et al.
POLYMER TESTING (2020)
The Effects of Combined Infill Patterns on Mechanical Properties in FDM Process
Mohammadreza Lalegani Dezaki et al.
POLYMERS (2020)
Robust design of electric vehicle components using a new hybrid salp swarm algorithm and radial basis function-based approach
Betul Sultan Yildiz
INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2020)
Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing
Flaviana Calignano et al.
MACHINES (2020)
Influence of change in layer thickness on mechanical properties of components 3D printed on Zortrax M 200 FDM printer with Z-ABS filament material & Accucraft i250+FDM printer with low cost ABS filament material
Sunil Khabia et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Mechanical property of FDM printed ABS: influence of printing parameters
M. Samykano et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
A new hybrid approach for reliability-based design optimization of structural components
Emre Demirci et al.
MATERIALS TESTING (2019)
Impact of Chemical Post-Processing in Fused Deposition Modelling (FDM) on Polylactic Acid (PLA) Surface Quality and Structure
Ana P. Valerga et al.
POLYMERS (2019)
Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide
Xia Gao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications
Evgeni Ivanov et al.
APPLIED SCIENCES-BASEL (2019)
Mechanical properties of PLA-graphene filament for FDM 3D printing
Jose C. Camargo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Mechanical characteristics of wood, ceramic, metal and carbon fiber-based PLA composites fabricated by FDM
Zhaobing Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Multi-strategy boosted mutative whale-inspired optimization approaches
Jie Luo et al.
APPLIED MATHEMATICAL MODELLING (2019)
Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM
Shouling Ding et al.
POLYMER TESTING (2019)
Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses
Yu Zhao et al.
MATERIALS & DESIGN (2019)
Mechanical engineering design optimisation using novel adaptive differential evolution algorithm
Hammoudi Abderazek et al.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2019)
Multi-surrogate-assisted metaheuristics for crashworthiness optimisation
Cho Mar Aye et al.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2019)
Experimental and numerical fatigue-based design optimisation of clutch diaphragm spring in the automotive industry
Alper Karaduman et al.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2019)
Lightweight design of an automobile hinge component using glass fiber polyamide composites
Taner Guler et al.
MATERIALS TESTING (2018)
An experimental and numerical investigation of the effects of geometry and spot welds on the crashworthiness of vehicle thin-walled structures
Emre Demirci et al.
MATERIALS TESTING (2018)
An investigation of the crash performance of magnesium, aluminum and advanced high strength steels and different cross-sections for vehicle thin walled energy absorbers
Emre Demirci et al.
MATERIALS TESTING (2018)
Investigation of influence of heat treatment on mechanical strength of FDM printed 3D objects
Wonjin Jo et al.
RAPID PROTOTYPING JOURNAL (2018)
Optimal Structural Design of Vehicle Components Using Topology Design and Optimization
Ali Riza Yildiz
Materials Testing (2013)
Structural Damage Detection Using Modal Parameters and Particle Swarm Optimization
Hakan Gökdağ et al.
Materials Testing (2013)
Hybrid enhanced genetic algorithm to select optimal machining parameters in turning operation
A. R. Yildiz et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Hybrid approach for genetic algorithm and Taguchi's method based design optimization in the automotive industry
I. Karen et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2006)
Neuro-genetic design optimization framework to support the integrated robust design optimization process in CE
Nursel Oeztuerk et al.
CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS (2006)
Optimal design of vehicle components using topology design and optimisation
AR Yildiz et al.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2004)