☆ 4.6 Article

Chemical bath deposited SnO2 for high-efficiency perovskite solar cells on Ti substrates

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

Controlled growth of perovskite layers with volatile alkylammonium chlorides

Jaewang Park et al.

Summary: Controlling the crystallinity and surface morphology of perovskite layers is crucial for achieving high-efficiency perovskite solar cells. By adding alkylammonium chlorides (RACl) to a-formamidinium lead iodide (FAPbI(3)), the crystallization process and surface morphology of the perovskite thin films can be controlled. The resulting perovskite thin layers facilitate the fabrication of perovskite solar cells with a high power-conversion efficiency of 26.08%.

NATURE (2023)

Add to Collection

Article Engineering, Environmental

Carbon nanofibers fabricated via electrospinning to guide crystalline orientation for stable perovskite solar cells with efficiency over 24%

Zhiyang Xu et al.

Summary: This study introduces nitrogen-doped carbon nanofibers to guide the preferential orientation growth of perovskite crystals, reducing the defect density in perovskite solar cells and improving their power conversion efficiency and stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Oxygen Vacancy Management for High-Temperature Mesoporous SnO2 Electron Transport Layers in Printable Perovskite Solar Cells

Jiale Liu et al.

Summary: This study demonstrates the use of magnesium (Mg) to manage oxygen vacancies (OVs) and achieve efficient printable perovskite solar cells (PSCs) with a high-temperature mesoporous SnO2 electron transport layer (ETL). The high-temperature annealing process reduces self-doping of SnO2 by reducing OVs, while the introduced Mg promotes OV formation. The synergistic effect of Mg on OVs increases carrier density and raises the Fermi level energy of the mp-SnO2 ETL, resulting in a significant improvement in device performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Applied

Coffee ring controlment in spray prepared >19% efficiency Cs0.19FA0.81PbI2.5Br0.5 perovskite solar cells

Xinxin Yu et al.

Summary: This study successfully controls the coffee ring effect in spraying technology by using a reaction-dependent regulating strategy, resulting in high-quality perovskite films for solar cells. The use of n-butyl alcohol as a solvent during spraying process effectively inhibits coffee ring effect and improves the performance of perovskite solar cells. This approach provides a reliable method for achieving high repeatability devices with good performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Perovskite Solar Cells Based on Tin Oxide Nanocrystals with Difunctional Modification

Jiahao Xi et al.

Summary: In this study, an effective method to achieve a low trap density and high electron mobility electron transport layer (ETL) based on SnO2 nanocrystals is proposed. The addition of potassium trifluoroacetate (KTFA) is able to passivate the oxygen vacancies in SnO2 nanocrystals, reducing traps and boosting electron collection. Furthermore, surface modification shifts the conduction band of SnO2 nanocrystals close to that of perovskite, facilitating electron transfer. As a result, the perovskite solar cells exhibit high efficiency and negligible hysteresis.

SMALL (2022)

Add to Collection

Article Chemistry, Physical

Pre-annealing treatment for high-efficiency perovskite solar cells via sequential deposition

Haibing Wang et al.

Summary: Grain boundaries in perovskite solar cells (PSCs) are vulnerable to degradation, but repairing these boundaries is challenging. A pre-annealing treatment can reconstruct the crystallites and grain boundaries, resulting in robust boundaries and improved efficiency and light stability in PSCs.

JOULE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Stable perovskite solar cells with 25.17% efficiency enabled by improving crystallization and passivating defects synergistically

Yihui Wu et al.

Summary: The introduction of a new material, APC, has improved the performance of perovskite solar cells by enhancing the photoluminescence lifetime and carrier diffusion length, ultimately achieving high efficiency and stability.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ag modified bathocuproine:ZnO nanoparticles electron buffer layer based bifacial inverted-type perovskite solar cells

Ching-Ju Chen et al.

Summary: The use of an Ag modified BCP:ZnO NPs thin film as a buffer layer in inverted-type perovskite solar cells significantly increases power conversion efficiency. Surface-enhanced Raman scattering and absorbance spectra reveal that the Ag modified BCP small molecules improve crystallinity and enhance short-circuit current density.

ORGANIC ELECTRONICS (2021)

Add to Collection

Article Chemistry, Physical

Thiosemicarbazide-complexed SnO2 electron transport layers for high-efficiency MAPbI3 perovskite solar cells

Lei Zhang et al.

Summary: Introducing thiosemicarbazide (TSC) as a multifunctional additive improves the properties of SnO2 ETLs, enhancing conductivity and wettability while facilitating perovskite film crystallization. This leads to a significant increase in power conversion efficiency and improved stability in PSCs based on TSC-complexed SnO2 ETLs.

SUSTAINABLE ENERGY & FUELS (2021)

Add to Collection

Review Chemistry, Physical

Role of oxygen vacancy in metal oxide based photoelectrochemical water splitting

Zhiliang Wang et al.

Summary: Oxygen vacancies play a crucial role in the optimization of photoelectrodes for PEC water splitting, affecting light absorption, charge separation, and surface reaction kinetics. Although the presence of oxygen vacancies may increase recombination, recent research has shown their beneficial impact on PEC performance, contrary to previous understanding. A comprehensive analysis of oxygen vacancies in metal oxide photoelectrodes is essential for achieving high efficiency in PEC.

ECOMAT (2021)

Add to Collection

Article Chemistry, Physical

Simultaneous Contact and Grain-Boundary Passivation in Planar Perovskite Solar Cells Using SnO2-KCl Composite Electron Transport Layer

Pengchen Zhu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Bendable Flexible Perovskite Solar Cells on a Nanoscale Surface Oxide Layer of Titanium Metal Plates

Gill Sang Han et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Effective Carrier-Concentration Tuning of SnO2 Quantum Dot Electron-Selective Layers for High-Performance Planar Perovskite Solar Cells

Guang Yang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient Organic-Inorganic Hybrid Flexible Perovskite Solar Cells Prepared by Lamination of Polytriarylamine/CH3NH3PbI3/Anodized Ti Metal Substrate and Graphene/PDMS Transparent Electrode Substrate

Jin Hyuck Heo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Ultrathin Buffer Layers of SnO2 by Atomic Layer Deposition: Perfect Blocking Function and Thermal Stability

Ladislav Kavan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%

Qi Jiang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Oxygen vacancies confined in SnO2 nanoparticles for desirable electronic structure and enhanced visible light photocatalytic activity

Yuanjie Yang et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Nanoscience & Nanotechnology

UV-Sintered Low-Temperature Solution-Processed SnO2 as Robust Electron Transport Layer for Efficient Planar Heterojunction Perovskite Solar Cells

Like Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

All-inorganic large-area low-cost and durable flexible perovskite solar cells using copper foil as a substrate

B. Abdollahi Nejand et al.

CHEMICAL COMMUNICATIONS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Low-Temperature Solution-Processed SnO2 Nanoparticles as a Cathode Buffer Layer for Inverted Organic Solar Cells

Van-Huong Tran et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Silver Nanowire Top Electrodes in Flexible Perovskite Solar Cells using Titanium Metal as Substrate

Minoh Lee et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Highly efficient planar perovskite solar cells through band alignment engineering

Juan Pablo Correa Baena et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Flexible organo-metal halide perovskite solar cells on a Ti metal substrate

Minoh Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Highly efficient, flexible, indium-free perovskite solar cells employing metallic substrates

Joel Troughton et al.

Journal of Materials Chemistry A (2015)

Add to Collection

Article Chemistry, Physical

TiO2 nanotube arrays based flexible perovskite solar cells with transparent carbon nanotube electrode

Xiaoyan Wang et al.

NANO ENERGY (2015)

Add to Collection

Article Chemistry, Analytical

Simultaneous Optimization of Nanocrystalline SnO2 Thin Film Deposition Using Multiple Linear Regressions

Saeideh Ebrahimiasl et al.

SENSORS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Self-doping for visible light photocatalytic purposes: construction of SiO2/SnO2/SnO2:Sn2+ nanostructures with tunable optical and photocatalytic performance

Menglin Sun et al.

RSC ADVANCES (2014)

Add to Collection

Article Chemistry, Physical

Synproportionation Reaction for the Fabrication of Sn2+ Self-Doped SnO2-x Nanocrystals with Tunable Band Structure and Highly Efficient Visible Light Photocatalytic Activity

Cong-Min Fan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.