Related references
Note: Only part of the references are listed.Problematic of heat treatment and its influence on mechanical properties of selectively laser melted AlSi10Mg alloy
Vladimir Mara et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
A Novel T6 Rapid Heat Treatment for AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion: Comparison with T5 and Conventional T6 Heat Treatments
Gianluca Di Egidio et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)
Microstructural evolution and strengthening mechanism of high-strength AlSi8.1 Mg1.4 alloy produced by selective laser melting
Yaoxiang Geng et al.
MATERIALS & DESIGN (2022)
Production Strategy for Manufacturing Large-Scale AlSi10Mg Components by Laser Powder Bed Fusion
Federico Bosio et al.
JOM (2021)
Enhancing as-built microstructural integrity and tensile properties in laser powder bed fusion of AlSi10Mg alloy using a comprehensive parameter optimization procedure
Adib Salandari-Rabori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Characterization and strengthening effects of different precipitates in Al-7Si-Mg alloy
Yifan Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Heat treatment of aluminium alloys produced by laser powder bed fusion: A review
J. Fiocchi et al.
MATERIALS & DESIGN (2021)
Effect of the Distance from Build Platform and Post-Heat Treatment of AlSi10Mg Alloy Manufactured by Single-and Multi-Laser Selective Laser Melting
Emanuela Cerri et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting
Qian Yan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution
Hong Qin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Atomic scale investigation of the crystal structure and interfaces of the B′ precipitate in Al-Mg-Si alloys
Haonan Chen et al.
ACTA MATERIALIA (2020)
Ad Hoc Heat Treatments for Selective Laser Melted Alsi10mg Alloy Aimed at Stress-Relieving and Enhancing Mechanical Performances
J. Fiocchi et al.
JOM (2020)
Heat Treatments and Critical Quenching Rates in Additively Manufactured Al-Si-Mg Alloys
Leonhard Hitzler et al.
MATERIALS (2020)
A comparative study of the effects of thermal treatments on AlSi10Mg produced by laser powder bed fusion
Elisa Padovano et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al-Si-Mg-Mn alloys
Qing Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg
Juan Guillermo Santos Macias et al.
ACTA MATERIALIA (2020)
Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting
Jeremy H. Rao et al.
SCRIPTA MATERIALIA (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
Luca Girelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Direct aging of a hot isostatically pressed A356 aluminum cast alloy
S. Hafenstein et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of thermal annealing on microstructure evolution and mechanical behavior of an additive manufactured AlSi10Mg part
Pin Yang et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures
Michaela Fousova et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
Le Zhou et al.
MATERIALS CHARACTERIZATION (2018)
Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
I Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting
Kun V. Yang et al.
MATERIALS & DESIGN (2018)
Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting
Riccardo Casati et al.
METALS (2018)
Low-alloy-correlated reversal of the precipitation sequence in Al-Mg-Si alloys
Y. X. Lai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Direction and location dependency of selective laser melted AlSi10Mg specimens
Leonhard Hitzler et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Insight into the partial solutionisation of a high pressure die-cast Al-Mg-Zn-Si alloy for mechanical property enhancement
Wenchao Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
Wei Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
Nesma T. Aboulkhair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting
Heng Rao et al.
MATERIALS & DESIGN (2016)
Selective laser melting of aluminum die-cast alloy-Correlations between process parameters, solidification conditions, and resulting mechanical properties
D. Buchbinder et al.
JOURNAL OF LASER APPLICATIONS (2015)
Effect of Mg level on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys
Hailin Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
Damien Buchbinder et al.
JOURNAL OF LASER APPLICATIONS (2014)
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
K. G. Prashanth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Solute nanostructures and their strengthening effects in Al-7Si-0.6Mg alloy F357
G. Sha et al.
ACTA MATERIALIA (2012)
Orientation of silicon particles in a binary Al-Si alloy
C. D. Marioara et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Heat treatment of high-pressure die castings
R. N. Lumley et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
An overview of the development of Al-Si-alloy based material for engine applications
HZ Ye
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2003)
Precipitation of chromium containing dispersoids in Al-Mg-Si alloys
L Lodgaard et al.
MATERIALS SCIENCE AND TECHNOLOGY (2000)
Precipitation sequence of various kinds of metastable phases in Al-1.0mass% Mg2Si-0.4mass% Si alloy
K Matsuda et al.
JOURNAL OF MATERIALS SCIENCE (2000)