Related references
Note: Only part of the references are listed.Evidence for two-stage hardening in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion
Igor C. dos Santos et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2023)
Influence of processing temperature on microhardness evolution, microstructure and superplastic behaviour in an Al-Mg alloy processed by high-pressure torsion
Denise C. Machado et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)
Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress
Roberto B. Figueiredo et al.
PROGRESS IN MATERIALS SCIENCE (2023)
Nanomaterials by severe plastic deformation: review of historical developments and recent advances
Kaveh Edalati et al.
MATERIALS RESEARCH LETTERS (2022)
The influence of shearable and nonshearable precipitates on the Portevin-Le Chatelier behavior in precipitation hardening AlMgScZr alloys
Han Chen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Eco-friendly additive manufacturing of metals: Energy efficiency and life cycle analysis
Chongjie Gao et al.
JOURNAL OF MANUFACTURING SYSTEMS (2021)
Grain boundary segregation and intermetallic precipitation in coarsening resistant nanocrystalline aluminum alloys
A. Devaraj et al.
ACTA MATERIALIA (2019)
Strain Induced Segregations in Severely Deformed Materials
Xavier Sauvage et al.
MATERIALS TRANSACTIONS (2019)
Annealing-Induced Hardening in Ultrafine-Grained Ni-Mo Alloys
Jeno Gubicza et al.
ADVANCED ENGINEERING MATERIALS (2018)
Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies
O. Renk et al.
SCRIPTA MATERIALIA (2018)
An examination of the superplastic characteristics of Al-Mg-Sc alloys after processing
Pedro H. R. Pereira et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Examining the Thermal Stability of an Al-Mg-Sc Alloy Processed by High-Pressure Torsion
Pedro Henrique R. Pereira et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
Microtexture analysis of restoration mechanisms during high pressure torsion of pure nickel
P. Ghosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate
Pedro Henrique R. Pereira et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Peculiar Spatiotemporal Behavior of Unstable Plastic Flow in an AlMgMnScZr Alloy with Coarse and Ultrafine Grains
Dania Zhemchuzhnikova et al.
METALS (2017)
Examining the microhardness evolution and thermal stability of an Al-Mg-Sc alloy processed by high-pressure torsion at a high temperature
Pedro Henrique R. Pereira et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)
Thermal stability and superplastic behaviour of an Al-Mg-Sc alloy processed by ECAP and HPT at different temperatures
P. H. R. Pereira et al.
7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (2017)
Al3(Sc,Zr)-based precipitates in Al-Mg alloy: Effect of severe deformation
Yu. Buranova et al.
ACTA MATERIALIA (2017)
Formation of fully austenitic ultrafine-grained high strength state in metastable Cr-Ni-Ti stainless steel by severe plastic deformation
S. V. Dobatkin et al.
MATERIALS LETTERS (2016)
Achieving superior grain refinement and mechanical properties in vanadium through high-pressure torsion.and subsequent short-term annealing
Yi Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
A review on high-pressure torsion (HPT) from 1935 to 1988
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical properties and microstructural evolution of nanocrystalline titanium at elevated temperatures
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of Grain Refinement on Jerky Flow in an Al-Mg-Sc Alloy
Anna Mogucheva et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Stabilization of nanocrystalline alloys via grain boundary segregation: A diffuse interface model
Fadi Abdeljawad et al.
ACTA MATERIALIA (2015)
Mechanical Behavior of an Al-Mg-Mn-Sc Alloy with an Ultrafine Grain Structure at Cryogenic Temperatures
Daria Zhemchuzhnikova et al.
ADVANCED ENGINEERING MATERIALS (2015)
An examination of the elastic distortions of anvils in high-pressure torsion
Pedro Henrique R. Pereira et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Unusual behavior of the Portevin-Le Chatelier effect in an AlMg alloy containing precipitates
D. A. Zhemchuzhnikova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Using finite element modelling to examine the flow process and temperature evolution in HPT under different constraining conditions
P. H. R. Pereira et al.
6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6) (2014)
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
Terence G. Langdon
ACTA MATERIALIA (2013)
The effect of solutes on grain boundary mobility during recrystallization and grain growth in some single-phase aluminium alloys
Y. Huang et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion
Roberto B. Figueiredo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Segregation of solute elements at grain boundaries in an ultrafine grained Al-Zn-Mg-Cu alloy
Gang Sha et al.
ULTRAMICROSCOPY (2011)
Seventy-five years of superplasticity: historic developments and new opportunities
Terence G. Langdon
JOURNAL OF MATERIALS SCIENCE (2009)
On the addition of precipitation- and work-hardening in an Al-Sc alloy
Jostein Royset et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion
Masaaki Kai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Composition evolution of nanoscale Al3Sc precipitates in an Al-Mg-Sc alloy: Experiments and computations
EA Marquis et al.
ACTA MATERIALIA (2006)
Kinetics and mechanisms of precipitation in an Al-0.2 wt.% Sc alloy
J Royset et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion
G Sakai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Scandium in aluminium alloys
J Royset et al.
INTERNATIONAL MATERIALS REVIEWS (2005)
Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al-Sc alloy
M Ferry et al.
ACTA MATERIALIA (2005)
Interaction of recrystallization and precipitation:: The effect of Al3SC on the recrystallization behaviour of deformed aluminium
MJ Jones et al.
ACTA MATERIALIA (2003)
Extension of the N-model to predict competing homogeneous and heterogeneous precipitation in Al-Sc alloys
JD Robson et al.
ACTA MATERIALIA (2003)
Manufacturing of lightweight components by metal forming
M Kleiner et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys
DN Seidman et al.
ACTA MATERIALIA (2002)
Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al-Mg alloys
S Lee et al.
ACTA MATERIALIA (2002)
Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys
EA Marquis et al.
ACTA MATERIALIA (2001)
Influence of scandium on superplastic ductilities in an Al-Mg-Sc alloy
S Komura et al.
JOURNAL OF MATERIALS RESEARCH (2000)
Recent development in aluminium alloys for the automotive industry
WS Miller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
New Al-Mg-Sc alloys
YA Filatov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)