Journal
MATERIALS CHARACTERIZATION
Volume 205, Issue -, Pages -Publisher
ELSEVIER SCIENCE INC
DOI: 10.1016/j.matchar.2023.113297
Keywords
NiTi shape memory alloys; Powder bed fusion; Microstructures; Energy density; Shape memory effect
Ask authors/readers for more resources
This study investigates the effect of energy densities on the microstructure, phase transformation behavior, and shape memory effect of NiTi shape memory alloys (SMAs) fabricated by powder bed fusion (PBF). The results show that increasing energy density leads to larger grain size and different grain orientations. Aging treatment improves the stability of the shape memory effect and increases the recovery strain of the NiTi alloy.
In this study, NiTi shape memory alloys (SMAs) were fabricated by powder bed fusion (PBF), and the effect of energy densities on the microstructure, phase transformation behavior and shape memory effect (SME) was studied. The results indicated that the NiTi SMAs exhibit a microstructure with coarse and long grains surrounded by fine grains, while the increase in energy density from 44.5 J/mm3 to 133.3 J/mm3 makes the grain size larger, and different energy densities induce various grain orientations. Specifically, the NiTi alloy produces more martensite B19' at two energy densities of 44.5 J/mm3 and 111.1 J/mm3 after aging at 773 K for 2 h. The phase transition behavior of B19' is related to the high angle grain boundaries (HAGBs) fraction and the grain orientation spread (GOS) distribution. SME tests showed that the NiTi alloy prepared by PBF had unstable recovery strain compared to the specimens after aging, and the SME of NiTi alloy after aging was more consistent with the evolution of the residual B19' content and grain orientation of the B2 phase. The sample prepared at an energy density of 111.1 J/mm3 exhibited the best recovery strain of 4.5%, depending on the greater residual B19' content and grain orientations of the B2 phase with higher Schmid factors. These results reveal the relationship between the recovery strain and microstructural evolution of NiTi SMAs prepared by PBF, and provide new insights into the fabrication of NiTi alloy with better SME by appropriate PBF process.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available