☆ 4.7 Article

A novel Cr2O3 coated CNTs system: Synthesis, microstructure regulation, and characterization

MATERIALS CHARACTERIZATION (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Enhanced electrical properties of Cr2O3 addition NBT-based high-temperature piezoelectric ceramics

Yanyan Zhang et al.

Summary: Due to industrial and technological developments, there is an increasing demand for piezoelectric ceramics that can function at temperatures of 500 degrees C or higher. This study investigated the effects of different additions of Cr2O3 on the structural and electrical properties of Ca-0.05(Na0.5Bi0.5)(0.95)Bi4Ti4O15 ceramics. The CNBT-Cr20 ceramic exhibited excellent properties with a high Curie temperature, a high piezoelectric coefficient, and a high resistivity at 500 degrees C, demonstrating its potential for applications at high temperatures.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Revealing the long-term oxidation and carburization mechanism of 310S SS and Alloy 800H exposed to supercritical carbon dioxide

Xianglong Guo et al.

Summary: The oxidation/carburization behavior and failure mechanism of 310S stainless steel and Alloy 800H exposed to supercritical carbon dioxide at high temperature and pressure were investigated. Both materials followed the parabolic oxidation law, but displayed different oxidation products and carburization behaviors. Alloy 800H experienced oxide spallation after 2000 hours, leading to a decrease in weight gain compared to 310S SS at 3000 hours. The differences in carburization mechanisms and oxide film stability contribute to the distinct behaviors observed between the two materials.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Chemistry, Physical

Carbon foams derived from emulsion-templated porous polymeric composites for electromagnetic interference shielding

Ruobing Tang et al.

Summary: A series of carbon foams (CFs) were fabricated from emulsion-templated porous polymeric composites, which showed higher robustness, more hydrophobic surface, and larger specific surface area. The electrical conductivity and electromagnetic interference (EMI) shielding effectiveness were greatly enhanced when carbon nanotubes (CNTs) and magnetic Ni@CNTs were simultaneously employed. These carbon foams can be perfect substitutes for commercial EMI shielding materials in the aerospace and wireless telecommunication fields.

CARBON (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Intense Raman D Band without Disorder in Flattened Carbon Nanotubes

Emmanuel Picheau et al.

Summary: Above a critical diameter, carbon nanotubes collapse into flattened forms, leading to unique Raman spectra changes. The presence of edge cavities and curvature changes near the edges activate a D band despite overall continuity in the structure. The differing perspectives of chemists and physicists on defects in carbon structures may lead to confusion for researchers in nanotechnologies.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Crossover magnetoresistance in non-transferred synthesized graphdiyne film

Huifang Kang et al.

Summary: This study developed a modified non-transferred graphdiyne film synthesis method and investigated its magnetoresistance effect. A temperature-dependent crossover between positive and negative magnetoresistance was observed in the graphdiyne film, with mechanisms involving the magnetic polaron model and weak localization.

CARBON (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Impact of epitaxial strain on crystal field splitting of α-Cr2O3(0001) thin films quantified by X-ray photoemission spectroscopy

Pamella Vasconcelos Borges Pinho et al.

Summary: The influence of epitaxial strain on the electronic structure of alpha-Cr2O3(0001) thin films is investigated through X-ray photoemission spectroscopy and crystal field multiplet calculations. In-plane lattice strain distorts the CrO6 octahedron and splits the 3d orbital triplet t(2g) into a(1) + e orbitals. Understanding these crystal field variations is crucial for tuning the physical properties of alpha-Cr2O3 thin films.

MATERIALS RESEARCH LETTERS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Carbon Nanotubes: Smart Drug/GeneDelivery Carriers

Hossein Zare et al.

Summary: Carbon nanotubes have unique properties that make them suitable for drug and gene delivery, as well as applications in cancer therapy, anti-inflammatory treatments, and phototherapy. However, concerns about nanotoxicity and environmental impact remain, despite decades of research and potential benefits.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2021)

Add to Collection

Article Chemistry, Physical

A novel UV-curable molecular-modified graphene oxide for high-resolution printed electronics

Shuyuan Zhang et al.

Summary: Development of graphene-based materials with good light-curing ability and excellent electrical conductivity is key for next-generation electronic devices. By modifying the molecular structure of photocurable graphene oxide, complex-shaped structures and thin films can be obtained, with the resulting material exhibiting properties similar to graphene after thermal reduction. This material shows great potential for various electronic applications, including circuits and detection electrodes.

CARBON (2021)

Add to Collection

Article Construction & Building Technology

Effects of nano-SiO2 coated multi-walled carbon nanotubes on mechanical properties of cement-based composites

Shaojie Li et al.

Summary: The interfacial microstructure and interactions significantly impact the mechanical properties of multi-walled carbon nanotubes (MWCNTs) reinforced cement-based composites. By preparing SiO2/MWCNTs nanocomposites using PVP as a surfactant without oxidation treatment on MWCNTs, the adhesion of MWCNTs-cement composites was improved, leading to enhanced flexural strengths of cement mortars. The addition of SiO2/MWCNTs effectively increased the C-S-H gel content at the interface between MWCNTs and cement matrix, resulting in the significant enhancement of mechanical properties.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Formation of a trivalent chromium conversion coating on AZ91D magnesium alloy

Jiantao Qi et al.

Summary: The study on trivalent chromium conversion (TCC) coating formation on AZ91D magnesium alloy revealed that the coating mainly contains Cr, Zr, O, S and F species, and provides corrosion protection mainly from the barrier layer at the base of the coating.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Distinct beneficial effect of Sn on the corrosion resistance of Cr-Mo low alloy steel

Meihui Sun et al.

Summary: This study demonstrates that the addition of Sn improves the corrosion resistance of Cr-Mo low alloy steel mainly by influencing microstructural transformation, leading to enhanced protection and stability of the rust layer. The synergistic effect of Sn, Cr, and Mo also provides ion selectivity to the inner rust layer, preventing Cl- penetration and inhibiting localized corrosion of the steel.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on carbon nanotube: An overview of synthesis, properties, functionalization, characterization, and the application

S. Rathinavel et al.

Summary: Carbon nanotubes (CNT) are a unique nanomaterial with characteristics such as lightweight, small size, good strength, and high conductivity. They are useful in materials like polymers, ceramics, and metallic surfaces.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A New Strategy for Detecting Plant Hormone Ethylene Using Oxide Semiconductor Chemiresistors: Exceptional Gas Selectivity and Response Tailored by Nanoscale Cr2O3 Catalytic Overlayer

Seong-Yong Jeong et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Analytical

Chemiresistive trimethylamine sensor using monolayer SnO2 inverse opals decorated with Cr2O3 nanoclusters

Sung Hyun Park et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Add to Collection

Article Engineering, Environmental

Microdomain sulfur-impregnated CeO2-coated CNT particles for high-performance Li-S batteries

Donghee Gueon et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Creation of N-C=O active groups on N-doped CNT as an efficient CarboCatalyst for solvent-free aerobic coupling of benzylamine

Hua Wei et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Fine tuning of optoelectronic properties of single-walled carbon nanotubes from conductors to semiconductors

Zeinab El-Moussawi et al.

CARBON (2019)

Add to Collection

Review Chemistry, Physical

Carbon nanotube- and graphene-based nanomaterials and applications in high-voltage supercapacitor: A review

Zhoufei Yang et al.

CARBON (2019)

Add to Collection

Article Chemistry, Physical

Oxidative acid treatment of carbon nanotubes

Nurettin Sezer et al.

SURFACES AND INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon nanotubes: synthesis, properties and engineering applications

Nikita Gupta et al.

CARBON LETTERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of Cu doped chromium oxide (Cr2O3) thin films

Ahlam Zekaik et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2019)

Add to Collection

Article Multidisciplinary Sciences

Cobalt chromium-layered double hydroxide, α- and β- Co(OH)2 and amorphous Cr(OH)3: synthesis, modification and characterization

Ofeliya O. Balayeva et al.

HELIYON (2019)

Add to Collection

Article Materials Science, Ceramics

Influence of microstructure on the wear and corrosion behavior of detonation sprayed Cr2O3-Al2O3 and plasma sprayed Cr2O3 coatings

P. Suresh Babu et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Review Pharmacology & Pharmacy

Functionalized carbon nanotubes as emerging delivery system for the treatment of cancer

Shubhangi Mahajan et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A green and economical vapor-assisted ozone treatment process for surface functionalization of carbon nanotubes

Jingjie Luo et al.

GREEN CHEMISTRY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Microwave Absorption Performance of Coated Carbon Nanotubes by Optimizing the Fe3O4 Nanocoating Structure

Na Li et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of corrosion scale formed on 3Cr steel in CO2-saturated formation water

Shaoqiang Guo et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Chemistry, Analytical

Sensing mechanism of the zirconia-based highly selective NO sensor by using a plate-like Cr2O3 sensing electrode

Han Jin et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Add to Collection

Article Polymer Science

Preparation of aluminum oxide-coated carbon nanotubes and the properties of composite epoxy coatings research

He Yi et al.

HIGH PERFORMANCE POLYMERS (2014)

Add to Collection

Article Chemistry, Physical

Surface modification of CNTs and enhanced photocatalytic activity of TiO2 coated on hydrophilically modified CNTs

Hanpei Yang et al.

APPLIED SURFACE SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites

Srinivasa R. Bakshi et al.

CARBON (2011)

Add to Collection

Article Chemistry, Physical

Ethane dehydrogenation over nano-Cr2O3 anode catalyst in proton ceramic fuel cell reactors to co-produce ethylene and electricity

Xian-Zhu Fu et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Highly Dispersed RuO2 Nanoparticles on Carbon Nanotubes: Facile Synthesis and Enhanced Supercapacitance Performance

Rong-Rong Bi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Add to Collection

Article Chemistry, Physical

Chromium oxyselenide solid solutions from the atmospheric pressure chemical vapour deposition of chromyl chloride and diethylselenide

Nicolas D. Boscher et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)

Add to Collection

Article Nanoscience & Nanotechnology

A new one-step synthesis method for coating multi-walled carbon nanotubes with cuprous oxide nanoparticles

Kakarla Raghava Reddy et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Chemistry, Physical

Coating carbon nanotubes with metal oxides in a supercritical carbon dioxide-ethanol solution

Zhenyu Sun et al.

CARBON (2007)

Add to Collection

Article Chemistry, Physical

Synthesis and characterization of manganese dioxide spontaneously coated on carbon nanotubes

Sang-Bok Ma et al.

CARBON (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Multiwalled carbon nanotubes beaded with ZnO nanoparticles for ultrafast nonlinear optical switching

YW Zhu et al.

ADVANCED MATERIALS (2006)

Add to Collection

Article Chemistry, Physical

Controllable fabrication of SnO2-coated nanotubes by chemical vapor multiwalled carbon deposition

Q Kuang et al.

CARBON (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical templating of metal nanoparticles and nanowires on single-walled carbon nanotube networks

TM Day et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication and characterization of ZnO-coated multi-walled carbon nanotubes with enhanced photocatalytic activity

LQ Jiang et al.

MATERIALS CHEMISTRY AND PHYSICS (2005)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation and characterization of aligned carbon nanotube-ruthenium oxide nanocomposites for supercapacitors

JS Ye et al.

SMALL (2005)

Add to Collection

Article Chemistry, Multidisciplinary

Coating carbon nanotubes with rare earth oxide multiwalled nanotubes

L Fu et al.

ADVANCED MATERIALS (2004)

Add to Collection

Article Chemistry, Multidisciplinary

Ruthenium oxide nanotube arrays fabricated by atomic layer deposition using a carbon nanotube template

YS Min et al.

ADVANCED MATERIALS (2003)

Add to Collection

Article Chemistry, Physical

High-κ dielectrics for advanced carbon-nanotube transistors and logic gates

A Javey et al.

NATURE MATERIALS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.