☆ 4.7 Article

In-situ EBSD study of the multiple deformation modes of a TiNb/Nb/NiTi multilayer composite

MATERIALS CHARACTERIZATION (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

The effect of sample size on the microstructure and mechanical properties of Ti2448 (Ti-24Nb-4Zr-8Sn wt%)

N. L. Church et al.

Summary: Ti-Nb based alloys are commercially important due to their damping capabilities. The consistency of the starting microstructure affects the reversibility of the transformation. The thickness of the material influences the microstructures and behaviors, with a single-phase layer in thin material promoting more recoverable transformation behavior.

SCRIPTA MATERIALIA (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Micromechanical behavior of TiNb/NiTi composite during a pre-straining process: an in situ synchrotron investigation

Shun Guo et al.

Summary: The micromechanical behavior of a TiNb/NiTi composite during pre-straining process was studied. It was found that the composite underwent stress-induced martensitic transformations and slight plastic deformation during loading, and reversible and partially reversible phase transformations during unloading. The growth and shrinkage of compound twins in martensite also contributed to the deformation of the composite.

RARE METALS (2023)

Add to Collection

Article Chemistry, Physical

Large-strain functional fatigue properties of superelastic metastable β titanium and NiTi alloys: A comparative study

Lorene Heraud et al.

Summary: This paper investigates the fatigue behavior of superelastic NiTi and two metastable beta titanium alloys. Precise characterization of stress induced martensitic transformation in these alloys was done using in situ cyclic tensile tests under synchrotron X-ray radiation. The fatigue life of metastable beta titanium alloys was found to be much better than that of NiTi alloy at large applied strains. The presence of defects and localized SIM transformation in NiTi alloy led to its lower fatigue properties compared to metastable beta titanium alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Chemistry, Physical

The mechanism of multi-directional Invar effect in a cross-rolling TiNb alloy

Wei Wang et al.

Summary: A binary metastable beta-type Ti-41Nb alloy was created through cross-rolling, exhibiting a multi-directional Invar effect. The alloy demonstrated the Invar effect along the transverse and rolling directions across a wide temperature range. This effect was achieved through the compensation between negative thermal expansion caused by martensitic phase transformation and positive thermal expansion due to lattice vibration.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Engineering, Mechanical

Enhanced twinning-induced plasticity effect by novel {315}α/{332}β correlated deformation twins in a Ti-Nb alloy

Xianbing Zhang et al.

Summary: A new {315}(alpha '') type deformation twinning system was discovered in a full alpha '' Ti-23Nb alloy, in addition to the {130}< 310 >(alpha '') system. After annealing, it was found that the {315}(alpha '') and {130}(alpha '') deformation twins transform into {332}(beta) twins of the beta parent phase. The study concluded that the presence of these deformation twins enhances work-hardening and plasticity in the alloy.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of cooling rate on ω phase precipitation and deformation mechanism of a novel metastable β titanium alloy

Kaige Wang et al.

Summary: This study investigated the effect of cooling rate on the mechanical properties of a beta titanium alloy, revealing that air-cooled alloy had larger omega phase size, higher tensile strength, but lower ductility compared to water-quenched alloy. The deformation mechanisms of the alloy also varied with cooling rate, showing a transition from stress-induced omega phase transformation to only dislocation slip.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Review Oncology

Hallmarks of Cancer: New Dimensions

Douglas Hanahan

Summary: The concept of the hallmarks of cancer is a tool for simplifying the complexity of cancer phenotypes and genotypes into basic principles. This article proposes phenotypic plasticity and disrupted differentiation as distinct hallmark capabilities, and discusses nonmutational epigenetic reprogramming and polymorphic microbiomes as enabling characteristics. Additionally, the importance of senescent cells in the tumor microenvironment is highlighted. The integrative concept of the hallmarks of cancer helps in understanding the mechanisms of cancer development and applying that knowledge to cancer medicine.

CANCER DISCOVERY (2022)

Add to Collection

Article Chemistry, Physical

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Jing Wang et al.

Summary: Understanding the deformation and fracture mechanisms of metastable beta titanium alloys is crucial for improving their formability and service life. Through a comprehensive analysis, this study reveals the different roles of various phases in the equiaxed microstructure and identifies the factors that contribute to damage, such as shear bands and microvoids. The findings also shed light on the pathways of crack propagation.

MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Toward tunable mechanical behavior and enhanced elastocaloric effect in NiTi alloy by gradient structure

Junyu Chen et al.

Summary: This study demonstrates a novel strategy to achieve highly tunable mechanical behavior and significantly enhanced elastocaloric effect in superelastic NiTi through the fabrication of a gradient structure using laser surface annealing. The gradient-structured NiTi exhibits tailorable martensitic transformation characteristics and shows improved elastocaloric cooling capacity and efficiency compared to traditional nanocrystalline and coarse-grained NiTi. The strong synergetic strengthening between fine and coarse grains in the gradient-structured NiTi contributes to these significant performance breakthroughs.

ACTA MATERIALIA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanisms of near-linear elastic deformation behavior in a binary metastable β-type Ti-Nb alloy with large recoverable strain

Shun Guo et al.

Summary: In this study, a Ti-Nb alloy with large near-linear recoverable strain was designed to investigate the physical mechanisms responsible for high near-linear elastic deformability. The experimental results showed that the high near-linear elastic deformability of this alloy is attributed to a combined effect of large inherent elastic deformation and a reversible SIMT.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Cryogenic tensile properties and deformation behavior of a fine-grained near alpha titanium alloy with an equiaxed microstructure

M. C. Zang et al.

Summary: This study focused on the cryogenic tensile properties and deformation mechanism of a fine-grained near alpha titanium alloy with an equiaxed microstructure. The results showed that the alloy exhibited an enhanced cryogenic tensile strength but decreased cryogenic ductility. This was attributed to the influence of high-angle misoriented equiaxed alpha-Ti grains, which hindered dislocation motion and limited twinning.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of phase transformation strain on the quasi-linear elastic deformation behavior for Nb/Ni50.3Ti49.7 composite

Baoguo Shen et al.

Summary: Based on the theoretical analysis of martensitic transformation crystallography and in situ synchrotron X-ray diffraction experiment, this study investigated the effect of the evolution of phase transformation strain on the quasi-linear elastic deformation behavior for Nb/Ni50.3Ti49.7 composite. The results indicate that during the stress-induced martensitic transformation, the 1319' martensitic variants 6 and 6' are preferentially preserved due to their maximum phase transformation strains. The increase in transformation strains for these variants during deformation helps achieve high quasi-linear elastic deforming capability in Nb/Ni50.3Ti49.7 composite.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Increasing the yield strength while preserving strain hardenability and ductility in a beta titanium alloy exhibiting transformation induced plasticity (TRIP)

M.S.K.K.Y. Nartu et al.

SCRIPTA MATERIALIA (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

In-situ synchrotron X-ray diffraction investigation on deformation behavior of Nb/NiTi composite during pre-straining process

Shun Guo et al.

Summary: The mechanisms responsible for deformation behavior in Nb/NiTi composite during pre-straining were systematically investigated. It was found that the composite experiences elastic elongation, slight plastic deformation, and stress-induced martensitic transformation during loading, while the deformation mechanisms during unloading mainly involve elastic recovery, compression deformation, and incomplete reverse SIM transformation.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving ultra-large elastic strains in Nb thin films on NiTi phase-transforming substrate by the principle of lattice strain matching

Fakhrodin Motazedian et al.

Summary: This study presents an innovative approach to induce ultra-large elastic lattice strains in metallic thin films by using a martensitic transforming substrate, showing great potential for improving functional properties of thin film materials. By matching the lattice strain of the thin film with the crystallographic lattice strain of the substrate, reversible elastic lattice strains were achieved, offering a unique opportunity to engineer and enhance the properties of thin film materials.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of martensitic microstructures in nanocrystalline NiTi wires deformed in tension

Orsolya Molnarova et al.

Summary: An experimental method is introduced for reconstructing martensite variant microstructures in nanocrystalline NiTi wire. It was found that the martensitic microstructures in the wire transform to different states upon loading and unloading, leading to characteristic microstructures with recoverable and unrecovered strains. The study also shows that the plastic deformation of oriented martensite proceeds by coordinated deformation twinning and dislocation slip, resulting in a refinement of the austenitic microstructure.

ACTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Biomaterials

Revisiting the effects of low-concentration hydrogen in NiTi self-expandable stents

Fan Sun et al.

Summary: The study investigates the impact of hydrogen on the mechanical properties of NiTi, finding that 8 wppm hydrogen has minimal effect while 40 wppm hydrogen significantly decreases martensitic transformation temperature and macroscopic ductility. Through techniques like electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM), the effects of hydrogen on NiTi are studied at different length scales.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In-situ investigation on tensile deformation and fracture behaviors of a new metastable β titanium alloy

Jing Wang et al.

Summary: The study found that a new metastable beta titanium alloy undergoes stress-induced martensite and mechanical twins during tensile deformation, leading to further work hardening. The crystallographic orientation influences the deformation and fracture behaviors, causing stress concentration and inhomogeneous deformation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Texture and Microstructure on Tensile Behaviors in the Polycrystalline Pure Niobium

Shanshan Zhang et al.

Summary: Different fabrication processes and recrystallization of polycrystalline niobium result in distinct microstructures and textures, leading to variations in tensile behaviors and properties. The enhanced <110> // RD texture in RCD-60 niobium indicates unique sub-structure arrangements during tensile deformation, while RCD-84 and CD-84 niobium display different phenomena after tensile failure. The analysis of Taylor factors reveals the difference in hardening rates during tensile deformation due to various fabrication and recrystallization processes of niobium.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

Xueli Wang et al.

Summary: The microstructure and microhardness of Ti-1023 alloy were systematically studied under different deformation modes, showing significant changes in alpha '' martensite transformation, grain refinement, and accumulation of dislocations. The simultaneous tension-torsion deformation mode was found to be more conducive to these effects, leading to an increase in microhardness.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Biomedical

Achieving a combination of decent biocompatibility and large near-linear-elastic deformation behavior in shell-core-like structural TiNb/ NiTi composite

Shun Guo et al.

Summary: The novel TiNb/NiTi composite with shell-core-like structure shows decent biocompatibility and large near-linear-elastic deformation behavior due to the obstruction of the NiTi inner core by the non-cytotoxic TiNb outer shell. The large near-linear-elastic deformation behavior is associated with intrinsic elastic deformation, reversible stress-induced martensitic transformations, and compound twins in martensitic plates. This study presents a new design approach for NiTi-based composites with both decent biocompatibility and large near-linear-elastic deformation behavior for various applications in biomedicine and engineering.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

A sandwich-structured Nb/NiTi composite with good bio-compatibility, near-linear-elastic deformation and large elastic admissible strain

Shun Guo et al.

Summary: This study achieved a novel sandwich-structured Nb/NiTi composite with good bio-compatibility and large near-linear-elastic deformability. The use of exterior non-toxic Nb layers isolating the surface of the NiTi layer contributed to the good bio-compatibility. The recoverable SIM transformation and compound twins within B19' martensite were found to be responsible for the large near-linear-elastic deformability in the composite.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Uniaxial tensile deformation behavior of a sandwich-like structural TiNb-NiTi composite for biomedical applications

Shun Guo et al.

Summary: The uniaxial tensile deformation behavior of a sandwich-like structural TiNb-NiTi composite was investigated, revealing elastic deformations, stress-induced martensitic transformations, and partial fracture during the loading process. The results provide valuable information for a better understanding of the deformation behavior of novel sandwich-like structural shape memory composites.

RARE METALS (2021)

Add to Collection

Review Engineering, Mechanical

Biomedical materials: A review of titanium based alloys

F. A. Anene et al.

Summary: Titanium alloys are highly valued in the biomedical field for their excellent mechanical properties, corrosion resistance, and biocompatibility. With the increasing demand for implants, there is an urgent need to accelerate research and development of biomaterials, with titanium alloys playing a crucial role in implant production.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Duality in dislocation density-superelasticity correlation in a TNTZ bio alloy processed by cold rolling and subsequent annealing

M. A. Kalaie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

The role of nano-scaled structural non-uniformities on deformation twinning and stress-induced transformation in a cold rolled multifunctional β-titanium alloy

Qianglong Liang et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Deformation behavior of a novel sandwich-like TiNb/NiTi composite with good biocompatibility and superelasticity

Shun Guo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Assessment of small-scale deformation characteristics and stress-strain behavior of NiTi based shape memory alloy using nanoindentation

Sujith Kumar S et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Engineering, Multidisciplinary

High performance Nb/TiNi nanocomposites produced by packaged accumulative roll bonding

Daqiang Jiang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Review Materials Science, Multidisciplinary

New insights into nickel-free superelastic titanium alloys for biomedical applications

A. Ramezannejad et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy

L. Lilensten et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

In situ synchrotron X-ray diffraction investigations of the physical mechanism of ultra-low strain hardening in Ti-30Zr-10Nb alloy

Z. W. Zhu et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Engineering, Mechanical

Transmission of {332} < 113 > twins across grain boundaries in a metastable beta-titanium alloy

Fengxiang Lin et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

Add to Collection

Article Chemistry, Physical

Design of low modulus β-type titanium alloys by tuning shear modulus C44

Qingkun Meng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

In situ synchrotron X-ray diffraction study of deformation behaviour of a metastable β-type Ti-33Nb-4Sn alloy

Shun Guo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Partial recrystallization of gum metal to achieve enhanced strength and ductility

J. -L. Zhang et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

On the mechanism of {332} twinning in metastable β titanium alloys

M. J. Lai et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Physics, Multidisciplinary

Reversion of a Parent {130}⟨310⟩α Martensitic Twinning System at the Origin of {332}⟨113⟩β Twins Observed in Metastable β Titanium Alloys

P. Castany et al.

PHYSICAL REVIEW LETTERS (2016)

Add to Collection

Article Engineering, Biomedical

Development of Ti-Nb-Zr alloys with high elastic admissible strain for temporary orthopedic devices

Sertan Ozan et al.

ACTA BIOMATERIALIA (2015)

Add to Collection

Article Physics, Applied

In situ synchrotron X-ray diffraction study of deformation behavior and load transfer in a Ti2Ni-NiTi composite

Junsong Zhang et al.

APPLIED PHYSICS LETTERS (2014)

Add to Collection

Article Thermodynamics

The Nb3Sn layers formation at diffusion annealing of Ti-doped multifilamentary Nb/Cu-Sn composites

E. N. Popova et al.

CRYOGENICS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Dynamic restoration mechanisms in a Ti-Nb stabilized ferritic stainless steel during hot deformation

S. V. Mehtonen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Engineering, Biomedical

Biocompatibility of Ti-alloys for long-term implantation

Mohamed Abdel-Hady Gepreel et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)

Add to Collection

Article Multidisciplinary Sciences

A Transforming Metal Nanocomposite with Large Elastic Strain, Low Modulus, and High Strength

Shijie Hao et al.

SCIENCE (2013)

Add to Collection

Article Nanoscience & Nanotechnology

A detwinning process of {332} ⟨113⟩ twins in beta titanium alloys

L. Qu et al.

SCRIPTA MATERIALIA (2013)

Add to Collection

Review Engineering, Biomedical

Development of new metallic alloys for biomedical applications

Mitsuo Niinomi et al.

ACTA BIOMATERIALIA (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis

E. Bertrand et al.

SCRIPTA MATERIALIA (2011)

Add to Collection

Review Materials Science, Multidisciplinary

Physical metallurgy of Ti-Ni-based shape memory alloys

K Otsuka et al.

PROGRESS IN MATERIALS SCIENCE (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Luders-like deformation associated with stress-induced martensitic transformation in NiTi

G Tan et al.

SCRIPTA MATERIALIA (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.