4.7 Article

Deformation behavior, microstructure evolution, and rupture mechanism of the novel G115 steel welded joint during creep

Journal

MATERIALS CHARACTERIZATION
Volume 205, Issue -, Pages -

Publisher

ELSEVIER SCIENCE INC
DOI: 10.1016/j.matchar.2023.113275

Keywords

G115 steel; Welded joint; Creep behavior; Microstructure; Fracture mechanism

Ask authors/readers for more resources

This study systematically investigated the creep deformation, microstructure evolution, and rupture mechanism of the G115 welded joint to promote its application in ultra-supercritical power plants. The G115 welded joint exhibited superior creep strength compared to other steels. The deformation mechanism was found to be closely associated with the stress levels. Short-term creep under higher stress resulted in rupture within the base metal, while long-term creep under lower stress led to brittle cracking within certain heat-affected zones. The study also highlighted the synergistic action of back stress and dislocation motion in enhancing the creep resistance of the G115 welded joint.
To promote the wide application of the G115 steel in ultra-supercritical (USC) power plants, creep deformation, microstructure evolution and rupture mechanism of the G115 welded joint were systematically investigated. The fabricated G115 welded joint exhibits superior creep strength to the P92 or MARBN steels. The deformation behaviors are analyzed by the Norton's power law, proving that the deformation mechanism is closely associated with the stress levels. During short-term creep under higher stress, the weld metal (WM) and heat-affected zone (HAZ) exhibit outstanding microstructure stability, and the rupture occurs within the base metal (BM) due to the lath fracture. While, during long-term creep under lower stress, the brittle Type IV cracking occurs within the inter-critical heat-affected zone (ICHAZ) or fine-grained heat-affected zone (FGHAZ) due to the formed micro voids along boundaries, obviously deteriorating the creep strength. The weld strength reduction factors are calculated under different stresses, and prove that synergistic action of back stress and dislocation motion can enhance the creep resistance of the G115 welded joint. Additionally, the allowable service stress of G115 weldments should be designed according to the creep strength of the welded joints under expected performance life.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available